A stationary siren creates an 894 Hz
sound. When a motorcyclist is driving
toward it, she hears a 926 Hz sound
How fast is she driving?
(Speed of sound = 343 m/s)
(Unit = m/s)​

Answer:

C. Walk four times per week

Explanation:

If she wants to increase her time then, she has to walk four times per week.

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object. The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

The mathematical expression for speed is given by

speed = total distance /Total time

As given in the problem Lyla walks three times per week for 45 minutes at a speed of 4.0 miles per hour. She must walk four times a week if she wants to extend her time.

Thus, the correct answer is option C.

Learn more about speed from here, refer to the link;

brainly.com/question/7359669

#SPJ2

The question is incomplete, the complete question is,

Lyla walks three times per week for 45 minutes at a speed of 4.0 miles per hour. She wants to increase her time. What should she do?

A. Walk at 4.5 miles per hour.

B. Walk for 50 minutes.

C. Walk four times per week.

D. Walk up and down more hills.

Answer:

C. Meter

Explanation:

The International System of Unit (SI) is gotten from the french word Systeme international is a modern form of metric measurement. It is the system of measurement that is universally accepted. It is from this SI units that all other system of units are derived. There are seven basic SI units which are:

1) Length in Meter (m)

2) Time in Seconds (s)

3) Amount of Substance in mole (m)

4) Electric current in ampere (A)

5) Temperature in kelvin (k)

6) Luminous intensity in candela (cd)

7) Mass in kilogram (kg)

Answer: ear phones

Explanation:

You can physically hold ear phones, but you can't hold music, sunlight, or heat.

Answer:

The answer is below

Explanation:

The efficiency of a machine is the ratio of its output to its input. The efficiency shows how effective the machine by the way it converts the input energy into work. The higher the efficiency of the machine the more effective it is. The efficiency is usually less than 1.

Given that the machine uses diesel oil (input) that can produce 3.0 x 10⁹ J of energy while the work performed by the machine (output) is 2.7 x 10⁸ J. The efficiency is given as:

Efficiency = output / input = 2.7 x 10⁸ J / 3.0 x 10⁹ J = 0.09 = 9%

This means that the machine is not effective because of its low efficiency

Answer:

Parachutes

Explanation:

Your parachute allows you to descend more slowly because it lowers terminal velocity by increasing your air resistance. Most parachutes are designed to create a large amount of drag and allow you to land at a safe, low speed.

HOPE THIS HELPS!!!

MARK IT AS BRAINLIEST !!!! ( the crown icon sometimes )

Answer:

The atom is mostly empty space.

Explanation:

Ernest Rutherford in the year 1911 developed a model of an atom. In his model the atom was shown that the atom is mostly empty spaces composed of negative electrons which orbits round a positive nucleus just like planets revolving round the sun.

Rutherford came up with this model by performing experiments in 1909 which involves the scattering of alpha particles on a thin gold foil. From this experiments he came up with his model.

Answer:

A!

Explanation:

The atom is mostly empty space.

Answer: 37.5 km

Explanation:

The question is that

If you ran 15 km/hr for 2.5 hours, how much distance would you cover ?

Where

Speed = 15 km/ hr

Time = 2.5 hours

Using the formula for speed.

Speed = distance/time

Substitute speed and time into the formula

15 = distance/ 2.5

Make distance the subject of formula by cross multiplying.

Distance = 15 × 2.5

Distance = 37.5 km.

Answer:

Solution

Given:

initial velocity (u)=0m/s (because an object

starts from the rest)

time (t)=3sec

diatance travelled(s)=14m(16-2=14)

acceleration (a)=?

Now,

According to the formula

s=ut+1/2at^2

or,14 =0×3+1/2×a×3^2

or, 14=0+a/2×9

or, 14=9a/2

or, 9a=28

or, a=28/9

or, a=3.1 m/s^2

Therefore, the acceleration of the object is 3.1m/s^2 ans.

Answer:

D

Explanation:

because light has no space nor mass

Answer:

In what way is iron unique among the elements?

It has the lowest mass per nuclear particle.

Match words at the left to the correct blanks in the sentences on the right. Not all words will be used.

-The energy that drives the expansion of a star into a subgiant or red giant comes from HYDROGEN SHELL FUSION

-Stars with mass greater than about 8 solar masses are considered HIGH-MASS STARS

-The final stage of core fusion in a low-mass star is HELIUM FUSION

-Stars that are fusing hydrogen in their cores are MAIN-SEQUENCE STARS

-When it dies, a high-mass star explodes as a SUPERNOVA

-A star that is expanding (into a subgiant and then a giant) has a(n) INERT HELIUM CORE

-When it dies, a low-mass star expels a PLANETARY NEBULA

-Stars with masses less than about two solar masses are considered LOW-MASS STARS

Answer:

The correct option is;

a. 12.5 g

Explanation:

The given parameters are;

The initial mass of the radioactive substance = 200 g

The half life of the radioactive substance = 50 years

The time duration for the disintegration = 200 years

The formula for half life is given as follows;

[tex]N(t) = N_0 \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{1/2}}[/tex]

Where:

N(t) = Quantity of the remaining substance

N₀ = Initial radioactive substance quantity  = 200 g

t = Time duration  = 200 years

[tex]t_{1/2}[/tex] = Half life of the radioactive substance  50 years

Therefore, we have;

[tex]N(t) =200 \times \left (\dfrac{1}{2} \right )^{\dfrac{200}{50} } =200 \times \left (\dfrac{1}{2} \right )^4 = 12.5 \ g[/tex]

Therefore, at the end of 200 years, the quantity left = 12.5 g.

Explanation:

Hi,

The answer is friction.

There is almost no machine which are not affected by friction. It losts some work due to friction while working.

Hope it helps..

Answer:

friction

Explanation:

the other options dont effect efficiency

Answer:

Explanation:

On rubbing a glass rod with silk, the electrons from the glass rod get transferred to the silk. The silk now has an excess of electrons and so is negatively-charged. On the other hand, the glass rod is deficient in electrons and hence is positively-charged.

In the above case, the silk undergoes negative electrification.

Now, when the positively charged glass rod is touched on the disc of a negatively charged gold leaf electroscope, the electrons shifts towards rod, hence amount of charge on gold leaves decreases and the divergence between the gold leaves decreases as unlike charges attract each other.

Hence, the divergence decreases when a glass rod rubbed with silk is brought near the disc of negatively charged electroscope.

hope it helps pls mark me as brainliest

Answer:

Gravitational fields are determined only by the mass ( or mass-energy) of a body. ... magnetic fields are produced by charged particles in motion, and depend on the charge and velocity of these particles, but not on their mass. Magnetic fields are 'polar' fields with a North and South polarity.

Explanation:

Answer:

230 = x + 105

x= 125

Explanation:

v = v0 + at

Explanation:

The ratio of the areas is the square of the ratio of the radii.

A/A = 3.16² = 9.99

The ratio of the volumes is the cube of the ratio of the radii.

V/V = 3.16³ = 31.6

Answer:

1.05×10⁻⁴ m²

Explanation:

ΔA = 2 A₀ α ΔT,

where ΔA is the change in area,

A₀ is the initial area,

α is the linear expansion coefficient,

and ΔT is the change in temperature.

A₀ = π (0.20 m / 2)² = 0.0314 m².

For steel, α = 13×10⁻⁶ /°C.

ΔT = 150°C − 22°C = 128°C.

ΔA = 2 (0.0314 m²) (13×10⁻⁶ /°C) (128°C)

ΔA = 1.05×10⁻⁴ m²

Answer:

When we have irregular objects, it may become very hard to calculate the volume of the object, as we actually can not use any simple equation to find it.

The mass is less tricky, just find a scale and wheight it, now we know the mass of the irregular object.

One way to measure the volume of the object is using water... how we do it?

Get some recipient with water, measure the height of the water.

Introduce your object into the water and totally submerge it, now the level of the water will rise. This is because as you introduce the object under the water, you are displacing up a given volume of water that has the same volume as the irregular object.

Now that you know the height of the water before and after you put your object, you can easily calculate the volume of water displaced, and that will be the volume of the object (the tricky part may be totally submerging the object if, for example, is wood and it floats, here you can use a thin wire to push it down but it will affect a little bit the measures.)

Answer:

Reproducible by other scientists

Explanation:

I just took the test

Answer:

Fnet = F√2

Fnet = kq²/r² √2

Explanation:

A exerts a force F on B, and C exerts an equal force F on B perpendicular to that.  The net force can be found with Pythagorean theorem:

Fnet = √(F² + F²)

Fnet = F√2

The force between two charges particles is:

F = k q₁ q₂ / r²

where

k is Coulomb's constant, q₁ and q₂ are the charges, and r is the distance between the charges.

If we say the charge of each particle is q, then:

F = kq²/r²

Substituting:

Fnet = kq²/r² √2

Answer:

Pressure

Explanation:

One of the theories propounded by the Kinetic molecular theory, and which also provides an explanation of the several gas laws, is the statement that the gas molecules in a container, travel in straight lines and are in constant collision with themselves and the walls of the container, thus exerting force. This force is the pressure which is defined as the force per unit area.

There is no loss of energy in the collisions involving the gas molecules and that is why their movement can be described as elastic. The descriptions of the behavior of gas molecules in the Kinetic Molecular Theory, give rise to Charles law, Boyle's Law, Avogadro's Laws, Dalton's Law, and Amonton's Law.

Answer:

The pressure

Explanation:

Molecules of gases are constantly in motion, colliding with the walls of their container. This constant collision impacts force on the walls of the container, which depends on the speed with which the molecules are moving. The speed with which these molecules travel depends on the average kinetic energy of the molecules, which is proportional to the temperature.

This force when exerted per unit area is the pressure the gases exert on the walls of the container.

Ignoring the air resistance it will take about 3 seconds for the object to reach the ground.We know that the acceleration due to gravity is 10m/s2.

We also know that the final velocity is 30 m/s while the initial velocity is 0 m/s

we can use the formulae for acceleration to calculate the time taken/

(final - initial velocity)/timetaken=10

(30-0)/timetaken=10

timetaken =30/10=3 seconds

Answer:

Explanation:

Heat is transferred in the following ways listed below

1. Conduction(Through direct contact of particles )

2. Convection(Through motion of hot and cold liquid )

3. Radiation(Through electromagnetic waves Through the rising of a warm gas )

1. Conduction: This has to do with the transfer of heat from one medium to another having direct contact with each other, the medium can either be solid or liquids

2. Convection: Has to do with the transfer of heat energy via molecules of the liquids in motion with different or varying temperature gradients

3. Radiation: Mostly occurs in gases, it is the transfer of energy through waves

Answer:

White light contains seven colors, which are separated by the prism.

White light reacts with chemicals in the air to produce seven colors.

Explanation:

It was first observed by Sir Issac Newton, that when white light is passed through a prism, an elongated, coloured patch of light is obtained on a screen placed behind the prism. The seven colours obtained constitute the spectrum of white light.

In nature, white light is separated into its constituent wavelengths when white light interacts with substances in the atmosphere.

Answer:

The correct answer is “color is an impurity added to white light by the prism.”

and

“White light contains seven colors, which are separated by the prism

Explanation:

Answer:

The time she takes to reach the water from when she jumps off the platform is 1.71 s

Explanation:

According to the equations of motion, we have;

v = u - g·t

v² = u² - 2·g·s

s₁ = u₁·t₁ + 1/2·g₁·t₁²

The given parameters are;

The height of the platform (assumption: above the water) = 10 m

The velocity with which she jumps, u = 3 m/s

The acceleration due to gravity, g = 9.81 m/s²

The height to which she jumps, s, is found as follows;

v² = u² - 2·g·s

At maximum height, v = 0, which gives;

0 = 3² - 2×9.81×s

2×9.81×s = 3² = 9

s = 9/(2×9.81) = 0.4587 m

s = 0.4587 m

The time to maximum height, t, is found as follows;

v = u - g·t

0 = 3 - 9.81×t

9.81×t = 3

t = 3/9.81 = 0.3058 s

The total distance, s₁ from maximum height to the water surface = s + 10 = 0.4587 + 10 = 10.4587 m = 10.46 m

The time to reach the water from maximum height, t₁, is found as follows;

s₁ = u₁·t₁ + 1/2·g₁·t₁²

Where;

s₁ =  The total distance from maximum height to the water surface = 10.46 m

u₁ = The initial velocity, this time from the maximum height = 0 m/s

g₁ = The acceleration due to gravity, g (positive this time as the diver is accelerating down) = 9.81 m/s²

t₁ = The time to reach the water from maximum height

Substituting the values gives;

s₁ = u₁·t₁ + 1/2·g₁·t₁²

10.46 = 0·t₁ + 1/2·9.81·t₁²

t₁²= 10.46/(1/2×9.81) = 2.13 s²

t₁ = √2.13  = 1.46 s

Total time = t₁ + t = 1.46 + 0.3058 = 1.7066 ≈ 1.71 s.

Therefore, the time she takes to reach the water from when she jumps off the platform = 1.71 s.

Answer:

a=F/m

a=12N/3kg  (here newton can be written as kgm/s^2 so kg will be cancelled)

a=4m/s^2

Explanation:

Answer;

7.238°

Explanation

From question we know that the grating has 1,970 grooves per centimeter, we can convert to from (cm) to (nm) for unit consistency

The slit separation is expressed below

d=1cm/1970

d=0.0005076

=5076nm

Then the angle (in degrees) that the red light of wavelength 640 nm appear in first order can be calculated using expression below

Sin(x)= mλ/d

Where λ= wavelength=640 nm

d=slit separation

Sin(x)= mλ/d

Sin(x)=(1×640)/5076

=0.126

sin-1(0.126)

X= 7.238°

Therefore,the angle (in degrees) that the red light of wavelength 640 nm appear in first order is 7.238°

Answer:

football

Explanation:

I took the 2.10 quiz and got it wrong so it must be football

Answer:

The distance Mr Franklin applied the force is 400 m

Explanation:

The efficiency of the machine = 80%

The force applied by the machine = 800 N

The distance over which the force is applied by the machine = 20 m

The force applied by Mr. Franklin = 50 N

The work done by the machine = 800 × 20 = 16000 J

The ideal work at 100% efficiency = X

80% of X = 16000 J

X = 16000 N/0.8 = 20,000 J

Therefore, we have have;

Work = Force × Distance;

20,000 J = 50 N × Distance Mr Franklin applied the force

Distance Mr Franklin applied the force = 20,000 J/(50 N) = 400 m

The distance Mr Franklin applied the force = 400 m.

Answer:

the awnser in 400m

Explanation:

did the test on edge 2020 and got it right

Explanation:

a) Acceleration is the slope of the velocity vs time graph.  When velocity vs time is a straight line, that means the acceleration is a constant.  F = ma, so the resultant force is also constant.

b) As air resistance increases, the acceleration begins to decrease.

c) A falling object stops accelerating when it reaches terminal velocity.

d) F = ma, so when the acceleration is 0, the resultant force is also 0.