A small object with mass 0.20 kg swings as a pendulum on the end of a long light rope. For small amplitude of swing, the period of the motion is 3.0 s. If the object is replaced by one with mass 0.400 kg, what is the period for small amplitude of swing? (a) 1.5 s (b) 3.05 (c) 6.0 s (d) 12.0 s (e) none of the above answers

Answers

Answer 1

Answer:

The correct option is (e) "none of the above".

Explanation:

Given that,

A small object with mass 0.20 kg swings as a pendulum on the end of a long light rope. For small amplitude of swing, the period of the motion is 3.0 s.

If the object is replaced by one with mass 0.400 kg, then we have to find the period for small amplitude of the swing.

We know that the time period can be calculated as :

[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

Where

l is the length

g is acceleration due to gravity

It means the time period is independent of the mass. So, if the mass is replaced by one with mass 0.400 kg, there is no effect on the time period.


Related Questions

if C is The vector sum of A and B C = A + B What must be true about The directions and magnitudes of A and B if C=A+B? What must be tre about the directions and magnitudes of A and B if C=0? ​

Answers

Check attached photo

Check attached photo

Answer:

Explanation:

1. If C = A + B then the lines A and B may have the same magnitude or they may not. The direction of A for example may be northwest ↖️ and the direction of B must be south ⬇️ because the arrow of A and the point of B must connect. Then C’s direction is west ⬅️ because it shouldn’t be as equilibrium.

2. If C = 0 t means the force is at equilibrium. That means all forces add up to zero. A’s direction for example may be northeast ↗️ and the direction of B may be south ⬇️ and the direction of C must be west if it has to be at equilibrium.

The magnitude of A and B must be equal

two bodies A and B with some asses 20 kg and 30 kg respectively above the ground which have greater potential​

Answers

Answer:

B has greater potential

Explanation:

We know;

Potential Energy (PE) = mgh

where, m=mass of body

g=acceleration due to gravity

h=height of body

From the formula,

PE is directly proportional to the mass of the body

so the body with greater mass has greater potential.

A long copper wire of radius 0.321 mm has a linear charge density of 0.100 μC/m. Find the electric field at a point 5.00 cm from the center of the wire. (in Nm2/C, keep 3 significant figures)

Answers

Answer:

[tex]E=35921.96N/C[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=0.321mm[/tex]

Charge Density [tex]\mu=0.100[/tex]

Distance [tex]d= 5.00 cm[/tex]

Generally the equation for electric field is mathematically given by

[tex]E=\frac{mu}{2\pi E_0r}[/tex]

[tex]E=\frac{0.100*10^{-6}}{2*3.142*8.86*10^{-12}*5*10^{-2}}[/tex]

[tex]E=35921.96N/C[/tex]

Why we use semiconductor instead of metal in thermopile.

Answers

Answer:

Semiconductors are not normal materials. They have special properties which conductors/metals cannot exhibit. The main reason for the behavior of semiconductors is that they have paired charge carriers-the electron-hole pair. This is not available in metals.

the rate of cooling determines ....... and ......​

Answers

Answer:

freezing point and melting point

The kinetic energy of a particle of mass 500g is 4.8j. Determine the velocity of the particle

Answers

Answer:

4.38 m/s

Explanation:

The answer is 4.38 m/s

define nortons theorem​

Answers

Answer:

In direct-current circuit theory, Norton's theorem is a simplification that can be applied to networks made of linear time-invariant resistances, voltage sources, and current sources. At a pair of terminals of the network, it can be replaced by a current source and a single resistor in parallel.

A block with a mass of 0.26 kg is attached to a horizontal spring. The block is pulled back from its equilibrium position until the spring exerts a force of 1.2 N on the block. When the block is released, it oscillates with a frequency of 1.4 Hz. How far was the block pulled back before being released?

Answers

Answer:

2

Explanation:

pulling force because of it force

Answer:

5.9 cm

Explanation:

f: frequency of oscillation

frequency of oscillationk: spring constant

frequency of oscillationk: spring constantm: the mass

[tex]f = \frac{1}{2\pi} \sqrt{ \frac{k}{m} } [/tex]

in this problem we know,

F= 1.4 Hz

m= 0.26 kg

By re-arranging the formula we get

[tex]k = {(2\pi \: f )}^{2} m = {(2\pi(1.4hz))}^{2} 0.26kg = 20.1 \frac{n}{m} [/tex]

The restoring force of the spring is:

F= kx

where

F= 1.2 N

k= 20.1 N/m

x: the displacement of the block

[tex]x = \frac{f}{k} = \frac{1.2 \: n}{20.1 \frac{n}{m} } = 0.059m \: = 5.9 \: cm[/tex]

Which circuit has the larger equivalent resistance: a circuit with two 10 ohm resistors connected in parallel or a circuit with two 10 ohm resistors connected in series?

Answers

Answer:

A circuit with two 10 ohm resistors connected in series.

Explanation:

The formula for the equivalent resistance for resistors in parallel is

[tex]\frac{1}{Rt} = \frac{1}{R1} + \frac{1}{R2}[/tex]   So if R1=R2= 10  [tex]\frac{1}{Rt} = \frac{1}{10} + \frac{1}{10} = \frac{2}{10} <=> Rt =\frac{10}{2} =5 ohm[/tex]

The formula for the equivalent resistance for resistors in series is

Rt = R1 + R2  So Rt= 10 + 10 = 20

A uniform magnetic field passes through a horizontal circular wire loop at an angle 15.1° from the normal to the plane of the loop. The magnitude of the magnetic field is 3.35 T , and the radius of the wire loop is 0.240 m . Find the magnetic flux Φ through the loop.

Answers

Answer:

0.5849Weber

Explanation:

The formula for calculating the magnetic flus is expressed as:

[tex]\phi = BAcos \theta[/tex]

Given

The magnitude of the magnetic field B = 3.35T

Area of the loop = πr² = 3.14(0.24)² = 0.180864m²

angle of the wire loop θ = 15.1°

Substitute the given values into the formula:

[tex]\phi = 3.35(0.180864)cos15.1^0\\\phi =0.6058944cos15.1^0\\\phi =0.6058944(0.9655)\\\phi = 0.5849Wb[/tex]

Hence the magnetic flux Φ through the loop is 0.5849Weber

i don't understand this, can someone help please?? ​

Answers

Explanation:

N2 + H2 --> NH3

balance them:

N2 + 3 H2 --> 2 NH3

so if 6 moles of N2 react, 12 moles of NH3 will form.

(you have to look at the big number in front, in this case its N2 and 2 NH3, therefore the amount of N2 will produce double the amount of NH3 )

you happen to visit the moon when some people on earth see a total solar eclipse. who has a better experience of this event, you or the friends you left behind back on earth

Answers

The friends left on earth because they can see the total eclipse, where as you are on the moon witnessing sections get dark rather than the whole picture

Your friend would have a better experience of this event, than you .

What is an eclipse?

An eclipse is produced when a planetary body moves in front of another planetary body and is visible from a third planetary body. Considering the sun, moon, and earth's locations in relation to one another during the time of the eclipse,

there are various types of eclipses in our solar system. For instance, a lunar eclipse occurs when the earth passes between the moon and the sun.

For the solar eclipse to happen the light from the sun is obstructed by the moon observing from the earth.

The buddies left Earth because they could view the whole eclipse, but you were on the moon and only saw parts of the eclipse turn black.

To learn more about the eclipse from here, refer to the link;

brainly.com/question/4279342

#SPJ2

What do you understand by moment of inertia and torque?
Word limit 50-60

Please don't copy from any sources. You can rewrite. Plagiarism will be check. Thank you.

Answers

Answer:

Moment of inertia, in physics, quantitative measure of the rotational inertia of a body—i.e., the opposition that the body exhibits to having its speed of rotation about an axis altered by the application of a torque (turning force). The axis may be internal or external and may or may not be fixed.

A nearsighted person has a near point of 50 cmcm and a far point of 100 cmcm. Part A What power lens is necessary to correct this person's vision to allow her to see distant objects

Answers

Answer:

P = -1 D

Explanation:

For this exercise we must use the equation of the constructor

       / f = 1 / p + 1 / q

where f is the focal length, p and q is the distance to the object and the image, respectively

The far view point is at p =∞  and its image must be at q = -100 cm = 1 m, the negative sign is because the image is on the same side as the image  

        [tex]\frac{1}{f} = \frac{1}{infinity} + \frac{1}{-1}[/tex]

         f = 1 m

         P = 1/f

          P = -1 D

A runner has a temperature of 40°c and is giving off heat at the rate of 50cal/s (a) What is the rate of heat loss in watts? (b) How long will it take for this person's temperature to return to 37°c if his mass is 90kg.

Answers

Answer:

(a)  209 Watt

(b) 4482.8 seconds

Explanation:

(a) P = 50×4.18

Where P = rate of heat loss in watt

    P = 209 Watt

Applying,

Q = cm(t₁-t₂)................ Equation 1

Where Q = amount of heat given off, c = specific heat capacity capacity of human, m = mass of the person, t₁ and t₂ = initial and final temperature.

From the question,

Given: m = 90 kg, t₁ = 40°C, t₂ = 37°C

Constant: c = 3470 J/kg.K

Substtut these values into equation 1

Q = 90×3470(40-37)

Q = 936900 J

But,

P = Q/t.............. Equation 2

Where t = time

t = Q/P............ Equation 3

Given: P = 209 Watt, Q = 936900

Substitute into equation 3

t = 936900/209

t = 4482.8 seconds

Determine the acceleration of a pendulum bob as it passes through an angle of 15 degrees to the right of the equilibrium point.

Answers

Answer:

Explanation:

Since energy is conserved:

2

mu  

2

 

=  

2

mv  

2

 

+mgh

⇒u  

2

=v  

2

+2gh

⇒(3)  

2

=v  

2

+2(9.8)(0.5−0.5cos60)

⇒v=2m/s

Acceleration of the simple pendulum is 2.62 m/s².

What is meant by a simple pendulum ?

When a point mass is suspended from a fixed support by a light, non-extensible string, the instrument is said to be a simple pendulum.

Here,

Let the mass of the bob be m. The simple pendulum is attached to the fixed support with a string having length l. The pendulum makes an angle of 15° with the vertical from the equilibrium point.

Let T be the tension acting on the string.

As, the bob passes through the angle,

The weight of the bob becomes equal to the vertical component of the tension.

mg = T cos15°

Also, the horizontal component of the tension,

T sin15° = ma

By solving these two equations, we get that,

Acceleration of the simple pendulum,

a = g tan15°

a = 9.8 x 0.267

a = 2.62 m/s²

Hence,

Acceleration of the simple pendulum is 2.62 m/s².

To learn more about simple pendulum, click:

https://brainly.com/question/31816771

#SPJ3

cyclist always bends when moving the direction opposite to the wind. Give reasons​

Answers

When he bends he kinda off his feet and light but if it’s not i’m so sorry this is just my thinking.

A 20 N south magnetic force pushes a charged particle traveling with a velocity of 4 m/s west through a 5 T magnetic field pointing downwards . What is the charge of the particle ?

Answers

Answer:

Charge of the particle is 1 coulomb.

Explanation:

Force, F:

[tex]{ \bf{F=BeV}}[/tex]

F is magnetic force.

B is the magnetic flux density.

e is the charge of the particle.

V is the velocity

[tex]{ \sf{20 = (5 \times e \times 4)}} \\ { \sf{20e = 20}} \\ { \sf{e = 1 \: coulomb}}[/tex]

PLEASE ANSWER IF YOU CAN AND NOT FOR THE SAKE OF GAINING POINTS!

Answers

A is the correct answer because the the plane mirror would move the same speed in the same direction

Which of the following choices is not an example of climate?
0000
San Diego has mild, warm temperatures and sea breezes year-round.
Anchorage has short, cool summers and long, snowy winters.
It will be 78° on Friday in Clovis.
Florida is tropical, with a significant rainy season.

Answers

Answer:

Florida is tropical, with a significant rainy seson

​Determine usando ecuación de Bernoulli la Presión P1 necesaria para mantener la condición mostrada dentro del sistema mostrado en la figura, sabiendo que el aceite tiene un s.g =0.45 y el valor de d=90mm.

Answers

Answer:

PlROCA

Explanation:

Describing Uses ñ Olivia wants to find out whether a substance will fluoresce. She says she should put it in a microwave oven. Do you agree with her? Why or why not?

Answers

I don’t agree what if it blows up?

Two forces are acting on a body. One acts east, the other at 35° north of east. If the
two forces are equal in magnitude of 50 N, find the resultant using the Law of Sines
and the Law of Cosines. Please answer with full solution. Thanks

Answers

A=B=50NAngle=theta=35°

We know

[tex]\boxed{\sf R=\sqrt{A^2+B^2+2ABcos\Theta}}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{50^2+50^2+2(50)(50)cos35}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{2500+2500+2(2500)\times (-0.9)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000+5000(-0.9)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000+(-4500)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000-4500}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{-500}[/tex]

[tex]\\ \sf\longmapsto R=22.4i[/tex]

Resultant using the Law of Sines and the Law of Cosines will be R=95 N

What is force?

Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.

The Magnitude of two forces =50 N

Angle between the forces = 35

By using the resultant formula

[tex]\rm R=\sqrt{A^2+B^2+2ABCos\theta}[/tex]

[tex]\rm R=\sqrt{50^2+50^2+2(50)(50)Cos35}[/tex]

[tex]\rm R=\sqrt{5000+5000(0.81)}[/tex]

[tex]\rm R=\sqrt{5000+4500}[/tex]

[tex]\rm R=95\ N[/tex]

Hence the Resultant using the Law of Sines and the Law of Cosines will be R=95 N

To know more about force follow

https://brainly.com/question/25239010

When the drag force on an object falling through the air equals the force of gravity, the object has reached
terminal force.
terminal acceleration,
terminal illness.
terminal velocity

Answers

The answer is terminal force

A ball of mass 0.50 kg is rolling across a table top with a speed of 5.0 m/s. When the ball reaches the edge of the table, it rolls down an incline onto the floor 1.0 meter below (without bouncing). What is the speed of the ball when it reaches the floor?


PLEASE EXPLAIN HOW YOU GOT THE ANSWER THANK YOU SO MUCH

Answers

Answer:

0

Explanation:

The speed of the ball when it reaches the floor is 0 because when an object is at rest or in uniform motion, it has no speed/velocity

The final speed of the ball when it reaches the floor is 7.10 m/s.

What is the conservation of energy?

The conservation of energy is a fundamental principle in physics that states that energy cannot be created or destroyed, but only converted from one form to another or transferred from one system to another. In other words, the total amount of energy in a closed system remains constant over time, even though it may be converted from one form to another.

This principle is based on the first law of thermodynamics, which states that the total energy of a closed system is always conserved, and can only be changed by the transfer of heat, work, or matter into or out of the system. The conservation of energy has important applications in various fields of physics, including mechanics, thermodynamics, and electromagnetism, and is a fundamental principle in the understanding of the natural world.

Here in the Question,

We can use the conservation of energy to solve this problem. Initially, the ball has kinetic energy due to its motion on the tabletop, but no potential energy since it is at a constant height. When the ball rolls off the edge of the table, it loses some kinetic energy due to friction but gains potential energy as it moves upward. When it reaches the floor, it has gained potential energy but lost kinetic energy due to friction. We can assume that the energy lost due to friction is converted to thermal energy, so the total energy of the system is conserved.

Let's start by calculating the potential energy gained by the ball as it moves from the edge of the table to the floor:

ΔPE = mgh

where ΔPE is the change in potential energy, m is the mass of the ball, g is the acceleration due to gravity, and h is the vertical distance traveled by the ball.

ΔPE = (0.50 kg)(9.81 m/s^2)(1.0 m) = 4.905 J

Now we can use the conservation of energy to find the final kinetic energy of the ball, which will allow us to calculate its final speed:

KEi + ΔPEi = KEf + ΔPEf

where KEi and ΔPEi are the initial kinetic and potential energies of the ball, respectively, and KEf and ΔPEf are the final kinetic and potential energies of the ball, respectively.

Since the ball is not bouncing, we can assume that its initial and final potential energies are zero. Therefore:

KEi = KEf + ΔKE

where ΔKE is the change in kinetic energy due to friction.

We can assume that the coefficient of kinetic friction between the ball and the incline is constant, and use the work-energy principle to find ΔKE:

Wfric = ΔKE

where Wfric is the work done by friction.

The work done by friction can be expressed as:

Wfric = ffricd

where ffric is the force of friction and d is the distance traveled by the ball on the incline.

The force of friction can be expressed as:

ffric = μmg

where μ is the coefficient of kinetic friction, and m and g have their usual meanings.

Putting it all together, we get:

KEi = KEf + ffricd

KEi = KEf + μmgd

(1/2)mv^2 = (1/2)mu^2 + μmgd

v^2 = u^2 + 2gd

where u is the initial speed of the ball on the tabletop, and v is the final speed of the ball on the floor.

Plugging in the given values, we get:

v^2 = (5.0 m/s)^2 + 2(9.81 m/s^2)(1.0 m)

v^2 = 50.405

v = 7.10 m/s

Therefore, the final speed of the ball when it reaches the floor is 7.10 m/s.

To learn more about  the Law of Conservation of Momentum click:

https://brainly.com/question/30487676

#SPJ2

An equation for the period of a planet is 4 pie² r³/Gm where T is in secs, r is in meters, G is in m³/kgs² m is in kg, show that the equation is dimensionally correct.​

Answers

Answer:

[tex]\displaystyle T = \sqrt{\frac{4\, \pi^{2} \, r^{3}}{G \cdot m}}[/tex].

The unit of both sides of this equation are [tex]\rm s[/tex].

Explanation:

The unit of the left-hand side is [tex]\rm s[/tex], same as the unit of [tex]T[/tex].

The following makes use of the fact that for any non-zero value [tex]x[/tex], the power [tex]x^{-1}[/tex] is equivalent to [tex]\displaystyle \frac{1}{x}[/tex].

On the right-hand side of this equation:

[tex]\pi[/tex] has no unit.The unit of [tex]r[/tex] is [tex]\rm m[/tex].The unit of [tex]G[/tex] is [tex]\displaystyle \rm \frac{m^{3}}{kg \cdot s^{2}}[/tex], which is equivalent to [tex]\rm m^{3} \cdot kg^{-1} \cdot s^{-2}[/tex].The unit of [tex]m[/tex] is [tex]\rm kg[/tex].

[tex]\begin{aligned}& \rm \sqrt{\frac{(m)^{3}}{(m^{3} \cdot kg^{-1} \cdot s^{-2}) \cdot (kg)}} \\ &= \rm \sqrt{\frac{m^{3}}{m^{3} \cdot s^{-2}}} = \sqrt{s^{2}} = s\end{aligned}[/tex].

Hence, the unit on the right-hand side of this equation is also [tex]\rm s[/tex].

A load of 25 kg is applied to the lower end and of a steal wire of length 25 m and thickness 3.0mm .The other end of wire is suspeded from a rigid support calculate strain and stress produced in the wire​

Answers

Answer:

the weight of the wire + 25kg

Explanation:

Let A^=6i^+4j^_2k^ and B= 2i^_2j^+3k^. find the sum and difference of A and B​

Answers

Explanation:

Let [tex]\textbf{A} = 6\hat{\textbf{i}} + 4\hat{\textbf{j}} - 2\hat{\textbf{k}}[/tex] and [tex]\textbf{B} = 2\hat{\textbf{i}} - 2\hat{\textbf{j}} + 3\hat{\textbf{k}}[/tex]

The sum of the two vectors is

[tex]\textbf{A + B} = (6 + 2)\hat{\textbf{i}} + (4 - 2)\hat{\textbf{j}} + (-2 + 3)\hat{\textbf{k}}[/tex]

[tex] = 8\hat{\textbf{i}} + 2\hat{\textbf{j}} + \hat{\textbf{k}}[/tex]

The difference between the two vectors can be written as

[tex]\textbf{A - B} = (6 - 2)\hat{\textbf{i}} + (4 - (-2))\hat{\textbf{j}} + (-2 - 3)\hat{\textbf{k}}[/tex]

[tex]= 4\hat{\textbf{i}} + 6\hat{\textbf{j}} - 5\hat{\textbf{k}}[/tex]

If Vector A is (6, 4) and Vector B is (-2, -1), what is A – B?
A. (8,5)
B. (4,5)
C. (4,3)
D. (8,3)

Answers

Answer:

I think the answer is A...I'm not sure

Explanation:

A=(6,4)

B=(-2,-1)

A-B=(6-(-2)),(4-(-1))

=(6+2),(4+1)

=(8,5)

Answer:

[tex]6-(-2)=[/tex]

[tex]6+2[/tex]

[tex]=8[/tex]

[tex]4-\left(-1\right)[/tex]

[tex]=4+1[/tex]

[tex]=5[/tex]

[tex](8,5)[/tex]

[tex]\textbf{OAmalOHopeO}[/tex]

The force of gravity is an inverse square law. This means that, if you double the distance between two large masses, the gravitational force between them Group of answer choices weakens by a factor of 4. strengthens by a factor of 4. weakens by a factor of 2. also doubles. is unaffected.

Answers

Answer:

the force decreases by a factor of 4

Explanation:

The expression for the law of universal gravitation is

          F = [tex]G \frac{m_1m_2}{r^2}[/tex]

let's call the force Fo for the distance r

          F₀ = [tex]G \frac{m_1m_2}{r^2}[/tex]

They indicate that the distance doubles

          r ’= 2 r

we substitute

          F = [tex]G \frac{m_1m_2}{(r')^2}[/tex]

          F = [tex]G \frac{m_1m_2}{r^2} \ \frac{1}{4}[/tex]

         

          F = ¼ F₀

consequently the correct answer is that the force decreases by a factor of 4

If the distance between two large masses are doubled, the gravitational force between them weakens by a factor of 4.

Let the initial force be F

Let the initial distance apart be r

Thus, we can obtain the final force as follow:

Initial force (F₁) = F

Initial distance apart (r₁) = r

Final distance apart (r₂) = 2r

Final force (F₂) =?

F = GM₁M₂ / r²

Fr² = GM₁M₂ (constant)

Thus,

F₁r₁² = F₂r₂²

Fr² = F₂(2r)²

Fr² = F₂4r²

Divide both side by 4r²

F₂ = Fr² /4r²

F₂ = F / 4

From the illustration above, we can see that when the distance (r) is doubled, the force (F) is decreased (i.e weakens) by a factor of 4

Learn more: https://brainly.com/question/975812

Other Questions
sketch the graph of y=x(x-6)^ plz help me ans fast for 10 pts Because she slept through her alarm and did not have enough time to get ready, Paula looked a little ____ when she got to school. abcdefghijklmnopqrstuvwxyz WHAT ARE THE NEW LINKEDIN LIMITS? TWO TEST23. Evaluate 4b2 for b= -1/2 Suppose y varies inversely with x, and y = 32 when x = 4. What is the value of y when x = 8?a. 1/8b. 64c. 16d. 8NO LINKS OR ANSWERING QUESTIONS YOU DON'T KNOW!!! If the U.S. economy is producing at a level that is substantially less than potential GDP and the government's budget deficits are increasing aggregate demand, then ____________________________ is not much of a danger. The biological classification of organisms is called taxonomy. Based on your own investigation, discuss the importance of taxonomy in biological research. I just need the numbers anyone help ? three problems to develop the school Evaluate: 2-4 . =100 . -8 . -16 D. 1 16 A firm is making an economic loss of $100,000. This means that: multiple choice 1 the firm should immediately exit the industry. the firm's revenues are less than its opportunity costs. the firm is not making an accounting profit. the firm could increase economic profit if its resources were used in a different way. If a firm is making an economic profit of zero: multiple choice 2 it will have unhappy stockholders. it is not making an accounting profit. the firm should change to a different line of business. it cannot make a higher economic profit by changing how it is using its resources. Geometry, please answer question ASAP We have two fractions, 3/4 and 7/6 , and we want to rewrite them so that they have a common denominator (and whole number numerators). What numbers could we use for the denominator? I...the film was gripping, Harry slept from beginning to end Which organelle is responsible for transporting lipids in the cell?A. nucleus B. rough ER C. golgi apparatus D. mitochondrion Snapping fingers or flashing lights to get the attention of a deaf person would be similar to what in hearing cultureO grandly bowingO politely waitingO rudely interruptingO suddenly sneezing Thomas, the Department Head of the meat processing unit of a food manufacturing company, refuses to allow an OSHA (Occupational Safety and Health Administration) compliance inspector to carry out the inspection process. In this scenario, what action can the OSHA inspector take Solve T=L(2+RS) for R