A simple pendulum on Planet X oscillates at 3.1 Hz. If the acceleration due to gravity is 31.3 m/s^2 what is the length of the pendulum in cm?

Joan is going with speed 30 m/s. Hence, option (C) is correct.

Acceleration is the rate at which a velocity changes over time. It qualifies as a vector quantity because it possesses both direction and magnitude. Meter/second^2 (m/s^2) is the SI unit of acceleration.

Given that: initial speed of the car: u = 10 m/s.

Uniform acceleration of the car: a =  4 m/s^2.

Distance travelled: s = 100 meters.

Let, the final speed is = v

Using the formula v² = u² + 2as, we get:

v = √(10² + 2×4×100) m/s.

= 30 m/s.

Hence, final speed of the car is 30 m/s.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

Field poles are electromagnets whose polarities change as the flow of current alternates in the field windings.

An electromagnet is a sort of magnet wherein the magnetic area is produced with the aid of an electric current. Electromagnets generally encompass cord wounds into a coil. A cutting edge through the wire creates a magnetic discipline that is focused inside the hole in the middle of the coil.

Electromagnets create a magnetic discipline through the application of power. When you introduce the modern, either from a battery or any other supply of strength, it flows through the wire. This creates a magnetic discipline around the coiled cord, magnetizing the metal as though it were a permanent magnet.

Learn more about Electromagnets here:-https://brainly.com/question/1408043

#SPJ4

The crane is under 5120 N of force. The crane touches the rock boulder and uses mechanical force to lift it.

Force is a physical phenomenon that can change an object's shape as well as its state of motion or rest. The SI unit of force is the Newton.

Jib, gantry, and overhead cranes are the three pieces of machinery used most frequently in the industry. Depending on the type of item to be moved, either a chain or wire rope hoist will be used. In the shipbuilding sector, material handling is the main use of overhead cranes during the assembly process.

Briefing:

Mass (m) = 400kg

Acceleration (a) = 3.00 m/s^2

Gravitational acceleration (g) = 9.81 m/s^2

Force (F) = mg + ma

Force (F) = m (g + a)

Force (F) = 400 (9.81+3)

Force (F) = 5120 N

To know more about force click:

brainly.com/question/28692142

#SPJ1

An electromagnetic wave radiating from a specific 50.0-Hz AC power line has a maximum electric field strength of 13.0 kV/m. This extremely low frequency electromagnetic pulse has a wavelength of 6.00 x [tex]10^{6}[/tex]m.

A sinusoidal graph illustrates electromagnetic waves. It is made up of time-varying electric and magnetic fields that are perpendicular to each other and to the direction that waves travel.

Inverse proportionality describes the relationship between frequency and wavelength. Longer wavelengths are correlated with lower frequency, and vice versa. The fact that a wave's speed is equal to the product of its frequency and wavelength helps to explain how these two properties are related.

Briefing:

Given that,

Frequency of the power line, f = 50.0 Hz

Value of maximum electric field strength of 13.0 kV/m

The wavelength of this very low frequency electromagnetic wave is given by using relation as:

[tex]c = f[/tex]λ

λ [tex]= \frac{c}{f}[/tex]

λ [tex]= \frac{3.8 * 10^{8} m/s }{50}[/tex]

λ = 6 x [tex]10^{6}[/tex] m

To learn more about frequency visit:

brainly.com/question/14316711

#SPJ4

The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.

When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.

Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.

Learn more about The loop rule here:- https://brainly.com/question/15705903

#SPJ4

The distance before it falls back to the earth is 8.5 * 103 km. Option B

We know that the escape velocity has to do with the velocity that has to be supplied to a material so that the material can be able to escape from the earth's gravitational pull. Let us recall that the whole earth is a large gravitational field. If we throw an object up then the object would have to certainly fall doen to the ground under the influence of gravity.

It is therefore clear that gravity is the force that draws any object that  goes upwards down back to the ground. Given that we have been told here that the speed is  one-half of the escape speed, then then the magnitude of the speed is 5590.3 m/s.

Given that;

v^2 = u^2 - 2gh

v = final velocity

u = initial velocity

g = acceleration due to gravity

h = height

Then;

u^2 = 2gh

h = u^2/2g

h = ( 5590.3)^2/2 * 9.8

=  8.5 * 103 km

Learn more about escape velocity:https://brainly.com/question/14297933

#SPJ1

If you are in a car with a helium balloon in the middle of the back seat and you turn left, the balloon moves towards right.

A change in the air's surrounding density causes a helium-filled balloon to move.

The balloon operates in opposition to what your body would normally do. Therefore, if the automobile stops, the balloon will move to the back. The secret is that you are composed of materials that are significantly heavier than air and that the balloon is loaded with helium (He).

Turn left, the balloon goes right. When you turn right, the balloon moves to the left; when you stop, it moves to the right.

It has to do with the motion of the air in your car. When you start moving forward while stationary, all of the air in the car rushes to the back, where it builds up an area of higher air pressure.

To know more about helium balloon:

https://brainly.com/question/14733676

#SPJ4

A 95% confidence interval for μA-μB is 0.025

If we want to make a 95% confidence interval estimate for an unknown population mean. This means that there is a 95% probability that the confidence interval will have the true population mean.

Thus, P( [sample mean] - margin of error < μ < [sample mean] + margin of error) = 0.95.

We have,

n1 = 12

s1 = 5000

mean x1 = 36300

n2= 12

s2 =6100

mean x2 =38100

We have to find 95%confidence interval for μA- μB

from 95% = 100 (1-α%)

     1-α = 0.95

    α = 1-0.95 =0.05

α/2 = 0.025

To know more about mean here

brainly.com/question/14882017

#SPJ4

Correct. When new user profiles are created, the default profile is utilised. Umama wants to configure Group Policy settings to enable User Experience Virtualization (UE-V).

You can enable or disable User Experience Virtualization using this Group Policy setting (UE-V). Only versions of UE-V 2.x and earlier are affected by this setting. Use the Enable UE-V setting in Wind ows 10, version 1607, for UE-V. The location of the settings template catalogue and the location of the settings storage location are two crucial settings that she must set up.

A programme called Micro soft UE-V (User Experience Virtualization) enables users to switch between Wind ows devices while keeping their current operating system (OS) and application settings.

Learn more about OS here:

brainly.com/question/6689423

#SPJ1

When a massless item is fastened to an ideal spring with a force constant of 130 n/m, it is discovered that it vibrates at a frequency of 7.25 hz. The motion lasts 0.138 seconds.

In accordance with Hooke's law, the force necessary to compress or enlarge a spring is directionally related to or proportionate to the length it is stretched to. K is used to indicate the force constant.

The rate of vibrations and oscillations is called frequency, and it is expressed in hertz (Hz) units. To distinguish and ascertain vibrational patterns, frequencies are used. Therefore, a faster-vibrating atom would be seen as having a greater frequency than a slower-vibrating one.

T= 1/f = 1/7.25 Hz = 0.138s

To learn more about frequency visit:

brainly.com/question/14727355

#SPJ4

The given question is incomplete. The complete question is:

When an object of unknown mass is attached to an ideal spring with force constant 130 n/m, it is found to vibrate with a frequency of 7.25 hz. What is the period of the motion?

Answer:

decreases

Explanation:

The thermal energy of the gob decreases by heating the air around the gob and the mold in which the bottle is made

Answer: C

Explanation:

Enjoy <3

By simply creating more loops or pulleys, the pulley system's mechanical advantage can be accomplished.

Equation:

It is known that a pulley system can lift a crate with 90 newtons of force. Finding the pulley system's mechanical advantage is important if the input force is 15 newtons.

The force makes the distance longer as though it were working. Mechanical advantage is not greatly affected by the number of pulleys. This is only based on the amount of weight that needs to be lifted.

Therefore,

F1/F2 = 90/15

F1/F2 = 6

Given that the crate's weight is 90 N and the input force is 15 N, this makes sense.

To know more about mechanical advantages, visit:

brainly.com/question/24056098

#SPJ1

(a) The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c) The wavelength, in nanometers, of the light source;

                                   λ = 331.7 nm

(d) The slit width, in micrometers;

                                   d = 20.5 µm

(a) We know that Fringe width is given by,

                                  [tex]\beta =\frac{D\lambda}{d}[/tex]

Where,

           D = slit to screen distance

           λ = wavelength

           d = slit width

Given in the question,

           D = 2.05 m

           [tex]\beta =4 cm=0.04m[/tex]

Now,

          [tex]\frac{d}{D} =\frac{\lambda}{\beta } =\frac{400*10^{-9} }{0.04}[/tex]

                 d/D = 0.0001

Hence,

            The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b) Ratio of d & λ,

                            [tex]\frac{d}{\lambda} =\frac{D}{\beta }[/tex]

                            [tex]\frac{d}{\lambda}=\frac{2.05}{0.04}[/tex]

                            [tex]\frac{d}{\lambda}=51.25[/tex]

Hence,

           The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c)  The wavelength of the light source,  

                            [tex]\lambda=\frac{D\beta }{d}[/tex]

                            [tex]\lambda=\frac{17*10^{-6} *0.04}{2.05}[/tex]

                            [tex]\lambda=331.7nm[/tex]

Hence,

            The wavelength, in nanometers, of the light source;

                             λ = 331.7 nm

(d) The slit width,

                           [tex]d =\frac{D\lambda}{\beta }[/tex]

                           [tex]d=\frac{400*10^{-9} *2.05}{0.04}[/tex]

                           [tex]d=20.5 \mu m[/tex]

Hence,

           The slit width, in micrometers;

                                   d = 20.5 µm

Learn more about Diffraction here

https://brainly.com/question/16749356                            

#SPJ4

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv). the particles  eventually move back together because of mutual gravitational attraction.

As depicted in the following diagram, assume that two particles are present at positions P and Q at some point in time.

Think about a point R that is y miles away from a point Q, or QR=y PR=dy.

LP=mv0+mvd=mvd is the system's angular momentum around point P.

I The system's angular momentum around point Q is given by LQ=mvd+mv0=mvd.....(ii)

System's angular momentum about point R is given by LR=mv(d, y)+mv(y, d)=mvd....(iii)

The result of comparing equations I (ii), and (iii) is L P = LQ = LR....... (iv)

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv).

All objects with mass are attracted to one another by the gravitational attraction, which has a magnitude that is directly proportional to the masses of the two objects and inversely proportional to the square of their distance from one another.

Our feet remain firmly planted on the ground thanks to gravity, which also keeps the Moon in orbit around the Earth, the Earth in orbit around the Sun, the Sun in orbit around the galactic core of our Milky Way galaxy, and the Milky Way and Andromeda galaxies orbiting each other.

Learn more about galaxy here:

https://brainly.com/question/2905713

#SPJ4

The final velocity of the two balls after collision is 1.7 m/s and the direction is 45⁰.

The given parameters;

   mass of the first clay ball, m₁ = 20 g = 0.02 kg

   initial velocity of the first clay ball, u₁ = 3 m/s

   mass of the second clay ball, m₂ = 30 g = 0.03 kg

   initial velocity of the second ball, u₂ = 2 m/s

The initial momentum of the fist ball is calculated as follows;

                               P₁ = m₁u₁

                                  P₁ = (0.02)(3)

                                 P₁ = 0.06 kg.m/s

The initial momentum of the second ball is calculated as follows

                                      P₂ = m₂u₂

                                        P₂ = (0.03)(2)

                                         P₂ = 0.06 kg.m/s

The resultant initial momentum of the two balls is calculated as follows;

Apply the principle of conservation of momentum, to determine the final velocity of the two balls;

The direction of the two ball's velocity is calculated as follows;

To know more about speed direction visit:

https://brainly.com/question/13776007

#SPJ1

Maximum torque developed is (BIL²/4[tex]\pi[/tex]n).

Torque is a measure of force that can cause an object to rotate about an axis.

For any structure such as a solenoid, toroid, and circular arc, the magnetic field at a certain point of the structure is always proportional to the number of turns of the coil.

As we know magnetic field is (BIL²/4[tex]\pi[/tex]n)

2[tex]\pi[/tex]rn = L

r = (L/2[tex]\pi[/tex]n)

A = [tex]\pi[/tex]r²

A = (L²/4[tex]\pi[/tex]n²)

M = niA

M = (iL²/4n[tex]\pi[/tex])

Then Torque is Z = MBSin90°

The question is incomplete, the complete question is "a wire of length l is wrapped into a coil with n turns this coil is then placed in a magnetic field of strength b,  the maximum possible torque developed is?"

To know more about torque,

https://brainly.com/question/14149514

#SPJ4

The distance travelled by the car after the brake was applied is 125 m.

The distance travelled by the car is calculated by applying the following kinematic equation as shown below.

Mathematically, the distance travelled by the car at the given average speed is calculated as;

s = [ ( v + u ) / 2 ] t

where;

The distance travelled by the car is calculated as;

s = [ ( 0 + 25 m/s ) / 2 ] ( 10 s )

s = 125 m

Learn more about distance travelled here: https://brainly.com/question/24283318

#SPJ1

5.00 × 10-3/K is the coefficient of thermal expansion of the material from which the rod is made as it increases its length to 2.0005m

The coefficient of thermal expansion explains how an object's size varies when temperature changes. In particular, it measures the fractional size change per degree change in temperature at constant pressure, where lower coefficients denote a reduced propensity for size change.

The propensity of matter to alter shape, volume, and area in reaction to a change in temperature is known as thermal expansion. The average molecular kinetic energy of a substance has a monotonic relationship with temperature.

Use the equation for linear thermal expansion ΔL=αLΔT Δ L = α L Δ T to calculate the change in length, ΔL .

Get your rod hot enough to achieve, say, 1% linear thermal expansion.

The rod's dimension has increased to 1.01 units.

The rod is 1.030301 times its original size, or 1.013 larger than it was before heating.

This equals 1.03 when rounded to three major figures. In other words, its volume is 3% higher than that of the cold specimen.

The linear expansion is tripled, or 3%, by the volumetric expansion.

Learn more about Kinetic energy here:

brainly.com/question/26472013

#SPJ1

Complete question:

A rod has a length 2.0000 m at 20.0°C. The length of the rod increases to 2.0005 m when the temperature increases to 40.0°C. What is the coefficient of thermal expansion of the material from which the rod is made?

A inaccessible object is a dynamic variable on the free store without any pointer pointing to it.

Utilize the sextant's arc to determine the angle. By dividing the object's distance from the point of observation by the tan of the angle you calculated, you may use a scientific calculator to get the object's height.

The measuring of heights and distances that are unreachable is made easier by right-triangle trigonometry. By drawing a right triangle with the unknown height or distance as one of its sides and a known side and angle on the other, it is possible to determine the unknown height or distance.

To know more about inaccessible object visit:

https://brainly.com/question/21989844

#SPJ4

Answer:

dynamic variable

The approximate distance that the smoke travels up from the furnace is 9metres.

Distance is described as a numerical or occasionally qualitative measurement of how far apart objects or points are. In the field of physics or everyday usage, distance is usually referred to a physical length or an estimation based on other criteria.

Parameters given:

Velocity = 1.5

time = 6 seconds

We know that distance = speed x time

Hence, distance = 1.5 x 6 seconds

distance = 9 meters.

Distance is a scalar quantity that refers to how much ground an object has covered in the course of its motion while we can describe displacement as a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Learn more about distance at: https://brainly.com/question/26046491

#SPJ1

When a white dwarf acquires enough mass for its carbon interior to start fusing, a white dwarf supernova results.

The white dwarf entirely explodes as the star's fusion starts nearly immediately throughout the entire star. When iron is produced during fusion in a star's core, a "massive stellar supernova" results. If a white dwarf in a near binary system acquires enough mass to surpass the "white dwarf limit (1.4 solar masses)," it will erupt as a supernova. The absence of hydrogen characteristics in type I supernovae's spectra at maximum luminosity is a crucial identifying trait. The remnant core of a low-mass star known as a white dwarf is protected from the force of gravity by electron degeneracy pressure. The mass of the Sun is often condensed into a body no bigger than Earth in a white dwarf.

to know more about white dwarf please visit.

https://brainly.com/question/25872293

#SPJ4

1. The velocity of the center of mass of the two-block system is zero.

2. The magnitude of the acceleration of the left block is greater than that of the right block.

The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.

Learn more about center of mass here:

https://brainly.com/question/27549055

#SPJ4

The gravitational torque about the pivot when the mass is 60 ∘∘ above the +x-axis is (0.1838 Nm)k

Torque is the turning effect of a force which causes rotation. It is given by τ = F × d where

Since a 50 g mass rotates in a vertical plane--call it the xy-plane with the y-axis pointing up--at the end of a 75-cm-long, massless, rigid rod.

The gravitational torque is given by τ = F × d where

So, τ = F × d

= -(mgcosФ)j × di

= mgdcosФ(-j × i)

= -mgdcosФ(j × i)

= -mgdcosФ(-k)

= (mgdcosФ)k

Given that

Substituting the values of the variables into the equation, we have

τ = (mgdcosФ)k

= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k

= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k

= (0.3675 kgm²/s² × 0.5)k

= (0.18375 kgm²/s²)k

= (0.18375 Nm)k

≅ (0.1838 Nm)k

So, the torque is (0.1838 Nm)k

Learn more about torque here:

https://brainly.com/question/28219986

#SPJ1

Transmission coefficients are used in physics and electrical engineering when considering wave propagation in discontinuous media. The snells law is n₁sinθ1 = n₂sinθ2

The transmission coefficient describes the amplitude intensity or total power of the transmitted wave relative to the incident wave. The transmission coefficient is defined as the ratio of the transmitted particle flux to the incident particle flux and depends on the incident energy.

The sum of the reflected and transmitted energy must equal the total incident energy, so the transmission coefficient is calculated simply by subtracting the reflection coefficient. The ratio of the reflected wave amplitude to the incident wave amplitude is called the reflection coefficient.

Learn more about The transmission coefficients here:- https://brainly.com/question/9323897

#SPJ4

Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience: aphasia.

Aphasia is the inability to understand or form language due to damage to certain areas of the brain The main causes are stroke and head trauma. Although the prevalence is difficult to determine, aphasia due to stroke is estimated at 0.1-0.4% in the Global North. Aphasia can also be the result of a brain tumor, brain infection, or neurodegenerative disease (such as dementia).

To be diagnosed with aphasia, communication after an acquired brain injury Speech or language must be significantly impaired in one (or more) of the four aspects of Alternatively, in the case of progressive aphasia, it must have decreased significantly over a short period of time. The four dimensions of communication are auditory comprehension, verbal expression, reading and writing, and functional communication.

Learn more about Aphasia here : https://brainly.com/question/4045064

#SPJ4

The path taken by a light beam after passing through a mirror's focus is where it hits the mirror and reflects back in exactly the same direction as it went in.

Specular reflection is the name for this. A smooth surface allows light to bounce back at the same angle that it was incident. Rays of light that are reflected off of a smooth surface go in that same direction.

The narrow beams of light that travel in straight lines along their courses as electromagnetic waves are known as rays. Though its path might be altered by reflection or refraction, light always moves in a straight line.

To know more about path of the light ray visit :-

https://brainly.com/question/3703500

#SPJ1

The general instinct hypothesis, which contends that people are physiologically predisposed to or possess inclinations for violent behaviours, is known as the instinct theory of aggression in psychology.

In an effort to understand why we become aggressive and whether that behaviours can be altered, psychologists have developed three primary theories of aggression. Although many hypotheses have been put out, these three have proven most reliable and are crucial to comprehending the origins of violence. These hypotheses comprise as,

To know more about theory of aggression

https://brainly.com/question/3197702

#SPJ4

The reactive power of the branch (Qb) can be calculated from its voltage and current 676.16 VA.

Reactive power is the power in an AC circuit that is required to establish and maintain a voltage across a load. It is associated with the storage and release of energy in the form of electric and magnetic fields. Reactive power does not contribute to the actual work output of a system and is measured in Volt-amperes reactive (VARs). Power factor is a measure of reactive power relative to the total power in a system.

Source frequency = 60 Hz
Generator impedance = 0 W
Circuit:
Vg = 170 V
R1 = 10 Ω
R2 = 20 Ω
Zb = 20 + j10 Ω

The current flowing through the generator (Ig) and the branch (Ib) can be calculated from Ohm's Law:
Ig = Vg/R1 + Vg/R2 = 170/10 + 170/20 = 17 A
Ib = Ig - Vg/Zb = 17 - 170/(20 + j10) = 17 - 16.4 + j4.4 = 0.6 + j4.4 A
Since Ib is a complex number, we can find its magnitude (|Ib|) and angle (θ):
|Ib| = √(0.6² + 4.4²) = 4.46 A
θ = tan⁻¹(4.4/0.6) = 80.16°
The voltage across the branch (Vb-n) can be calculated using Ohm's Law:
Vb-n = Ib × Zb = (0.6 + j4.4) × (20 + j10) = -8.4 + j74.4 V
The apparent power of the branch (Sb) can be calculated from its voltage and current:
Sb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = -45.48 + j367.04 VA
The real power of the branch (Pb) can be calculated from its voltage and current:
Pb = Vb-n × Ib = (-8.4 + j74.4) × (0.6 + j4.4) = -45.48 - j367.04 W
The reactive power of the branch (Qb) can be calculated from its voltage and current:
Qb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = 676.16 VA

To learn more about reactive power
https://brainly.com/question/23230296
#SPJ4

Projectile launch is a kinematics application to the movement of objects near the earth's surface.

Since the acceleration is constant, the time it takes for the body to go up is equal to the time it takes to go down; thus, the time it takes to go up is half of the total time.

tu = ttotal/2

tu = 4.70 / 2

tu = 2.35 s

The height the ball reach

The point of maximum height where the vertical velocity is zero

vy = voy - gt

0 = voy - gt

voy = gt

= 9.8 x 2.35

= 23 m / s

By using the equation.

v²y = v²oy - 2gy

0 = v²oy - 2gy

y = v²oy/2g

y = 23²/2 x 9.8

y = 27 m

To find the initial velocity,

Initial vertical velocity = 23 m / s

vx = x/t

The throw range is 44m in time of 4.60 s

vₓ = 44 / 4.60

 v₀ =  [tex]\sqrt{v^{2}ox + v^{2}oy }[/tex]

 v₀ = [tex]\sqrt{9.56^{2}+23^{2} }[/tex]

 v₀ = 24.9 m / s

The launch angle is:

Let's use trigonometry

tan θ = voy/vox

θ = tan⁻¹ voy/vox

θ = tan⁻¹ 23/9.56  

θ = 67.4°

To learn more about Projectile launch refer to :

https://brainly.com/question/24216590

#SPJ1