A service station has both self-service and full-service islands. On each island, there is a single regular unleaded pump with two hoses. Let X denote the number of hoses being used on the self-service island at a particular time, and let Y denote the number of hoses on the full-service island in use at that time. The joint pmf of X and Y appears in the accompanying tabulation. y p(x, y) 0 1 2 x 0 0.10 0.03 0.02 1 0.06 0.20 0.07 2 0.05 0.14 0.33 (a) What is P(X

The area bounded by a chord and arc it intercepts is known as a segment of a circle segment of a circle

The area of the circle enclosed by line PL and arc PL is approximately 37.62 square units

The reason the above value is correct is as follows:

The given parameters in the question are;

The radius of the circle, r = 11

The length of the chord PL = 16

The measure of angle ∠PAL = 93°

Required:

The area of part of the circle enclosed by chord PL and arc PL

Solution:

The shaded area of the given circle is the minor segment of the circle enclosed by line PL and arc PL

The area of a segment of a circle is given by the following formula;

Area of segment = Area of the sector - Area of the triangle

Area of segment = Area of minor sector APL - Area of triangle APL

Area of minor sector APL:

Area of a sector = (θ/360)×π·r²

Where;

r = The radius of the circle

θ = The angle of the sector of the circle

Plugging in the the values of r and θ, we get;

Area of the minor sector APL = (93°/360°) × π × 11² ≈ 98.2 square units

Area of Triangle APL:

Area of a triangle = (1/2) × Base length × Height

Therefore;

The area of ΔAPL = (1/2) × 16 × 11 × cos(93°/2) ≈ 60.58 square units

Required shaded area enclosed by line PL and arc PL:

Therefore, the area of shaded segment enclosed by line PL and arc PL is found as follows;

Area of the required segment PL ≈ (98.2 - 60.58) square units = 37.62 square units

The area of the circle enclosed by line PL and arc PL ≈ 37.62 square units

Learn more about the finding the area of a segment can be found here:

https://brainly.com/question/22599425

The area of the circle enclosed by line segment PL and circle arc PL is 37.80 square units.

The calculation of the area between line segment PL and circle arc PL is described below:

1) Calculation of the area of the circle arc.

2) Calculation of the area of the triangle.

3) Subtracting the area found in 2) from the area found in 1).

Step 1:

The area of a circle arc is determined by the following formula:

[tex]A_{ca} = \frac{\alpha\cdot \pi\cdot r^{2}}{360}[/tex] (1)

Where:

[tex]A_{ca}[/tex] - Area of the circle arc.

[tex]\alpha[/tex] - Arc angle, in sexagesimal degrees.

[tex]r[/tex] - Radius.

If we know that [tex]\alpha = 93^{\circ}[/tex] and [tex]r = 11[/tex], then the area of the circle arc is:

[tex]A_{ca} = \frac{93\cdot \pi\cdot 11^{2}}{360}[/tex]

[tex]A_{ca} \approx 98.201[/tex]

Step 2:

The area of the triangle is determined by Heron's formula:

[tex]A_{t} = \sqrt{s\cdot (s-l)\cdot (s-r)^{2}}[/tex] (2)

[tex]s = \frac{l + 2\cdot r}{2}[/tex]

Where:

[tex]A_{t}[/tex] - Area of the triangle.

[tex]r[/tex] - Radius.

[tex]l[/tex] - Length of the line segment PL.

If we know that [tex]l = 16[/tex] and [tex]r = 11[/tex], then the area of the triangle is:

[tex]s = \frac{16+2\cdot (11)}{2}[/tex]

[tex]s = 19[/tex]

[tex]A_{t} = \sqrt{19\cdot (19-16)\cdot (19-11)^{2}}[/tex]

[tex]A_{t} \approx 60.399[/tex]

Step 3:

And the area between the line segment PL and the circle arc PL is:

[tex]A_{s} = A_{ca}-A_{t}[/tex]

[tex]A_{s} = 98.201 - 60.399[/tex]

[tex]A_{s} = 37.802[/tex]

The area of the circle enclosed by line segment PL and circle arc PL is 37.80 square units.

Answer:

200000

by 10009

Step-by-step explanation:

nbebsbsbsbbsbsbsbsbBz

Answer:

5 a) Total = 20.83 hrs = 20 hrs and 50 mins  (1250mins total)

5 b) Total = 96 meters. = 0.096km in 8 hrs.

Step-by-step explanation:

1km = 1000 meters

5 mins = 4 meters

1000/4 = 250 multiplier

250 x 5mins = 1250 minutes

1250/60 = 20hrs + 50 minutes

50 / 60 =  0.83 = 20.83hrs

b)  8 hrs = 8 x 60 = 480 minutes

480/5 = 24 multiplier of 4 meters

24 x 4 = 96 meters

Answer:

A

Step-by-step explanation:

c and d out of the question

b has its circle filled in meaning it could be 15lbs, which it's not

A correct answer by default

Answer:b

Step-by-step explanation: it has a filled in diamond which mean it's that...

Answer: $100

Step-by-step explanation:

Considering 50 + 50 = 100

This means that the amount of money is $100

We know

[tex]\boxed{\sf Q=CV}[/tex]

[tex]\\ \large\sf\longmapsto C=\dfrac{Q}{V}[/tex]

[tex]\\ \large\sf\longmapsto C=\dfrac{40}{10}[/tex]

[tex]\\ \large\sf\longmapsto C=4\mu F[/tex]

Answer:

B

Step-by-step explanation:

Since x= 3/4

To take the fraction on left hand side, inverse 4/3

Take π as denominator

Then cube root the entire equation on the left hand side.

Answer:

Step-by-step explanation:

Answer:

[tex]\frac{98p^{6}}{q}[/tex]

Step-by-step explanation:

Distribute the exponents

[tex](\frac{(7^{-2}p^{-6}q^{-8})}{2q^{-9}} )^{-1}[/tex]

[tex](\frac{q}{98p^{6}} )^{-1}[/tex]

Distribute the -1

[tex]\frac{98p^{6}}{q}[/tex]

Answer:

I thick the answer is 2277

Answer:

15/8

Step-by-step explanation:

tan(62)=P/B

tan(62)=15/8

Answer:

The volume of this cone would be approximately equal to 2787.64 [tex]yd.^2[/tex].

Step-by-step explanation:

The formula used to calculate the volume of a cone is [tex]\pi r^2*\frac{h}{3}[/tex] where [tex]r[/tex] represents the radius of the circle at the base of the cone, and [tex]h[/tex] represents the vertical height of the cone. In this case, [tex]r[/tex] equals the diameter of the base divided by two, which is [tex]\frac{22}{2}[/tex] or 11 yards; and [tex]h[/tex] is equivalent to 22 yards. Insert these values into the formula and you'll get that the volume of this cone is equal to [tex]11^2*\pi*\frac{22}{3} = 121\pi * \frac{22}{3}[/tex] ≈ 2787.64 [tex]yd.^2[/tex], so that is the correct answer.

Answer:

x = 3/4

Step-by-step explanation:

2(4x + 2) = 10           Remove the brackets

8x + 4 = 10               Subtract 4 from both sides

8x = 6                       Divide by 8

x = 6/8

x = 3/4

Check

2(4*3/4 + 2) =?10

2( 3 + 2) = 10

2*5 = 10

10 = 10

9514 1404 393

Answer:

  5/9

Step-by-step explanation:

  [tex]\dfrac{4\text{ L}}{7.2\text{ L}}=\dfrac{40}{72}=\dfrac{5\cdot8}{9\cdot8}=\boxed{\dfrac{5}{9}}[/tex]

Answer:

7/10 or 0.7

Step-by-step explanation:

a probability is always the ratio of possible cases over all cases.

"all cases" here is 100.

possible cases are all iPads not cracked in the inventory = 70 (because 30 are cracked, that leaves 100-30=70 not cracked).

so, the probability to select a non-cracked unit is

70/100 or simplified 7/10 (or 0.7)

Answer:

option A 5

I hope it's correct

.....

Rectangular prism and cylinder make up a camera.

A cube is a rectangular prism with all of its sides being the same length, a triangular prism has a triangle as its base, and a rectangular prism has a rectangle as its foundation. Another form of right prism that has a circle as its basis is a cylinder.

A rectangular prism includes a total of 6 faces, 12 sides, and eight vertices. Like a cuboid, it contains three dimensions- the base width, the height, and the length. The top and base of the rectangular prism exist rectangular. The pairs of opposite faces of a rectangular prism exist as identical or congruent.

A cylinder contains traditionally been a three-dimensional solid, one of the most essential curvilinear geometric shapes. Geometrically, it includes been regarded as a prism with a circle as its base.

Hence, Rectangular prism and cylinder make up a camera.

To learn more about rectangular prisms and cylinders refer to:

https://brainly.com/question/15594686

#SPJ2

Answer:

0.70 = 7/10

Step-by-step explanation:

Answer:

70/100 or 7/10 (Simplified)

Step-by-step explanation:

0.70 is basically .70 of 1. You can wrote this as a fraction, 70/100. If you divide 70 by 100, it gives you .70.

If you want to simplify it, it becomes 7/10, and if you divide 7 by 10, it also gives you 0.70.

Depends if you want your fraction simplified or not.

have a great day.

Answer:

x > 43

Step-by-step explanation:

Open circle at 43, which means it is not equal to 43

Line goes to the right, which means x is greater than

x > 43

Answer:

B

Step-by-step explanation:

Answer:

255,024

Step-by-step explanation:

24 x 23 x 22 x 21

24 options for the first member

23 options for the second member

22 options for the third member

21 options for the last member

Answer:

[tex]P(x \le 3) = 0.9920[/tex]

Step-by-step explanation:

Given

[tex]p = 6\%[/tex] --- proportion of drivers that had accident

[tex]n = 14[/tex] -- selected drivers

Required

[tex]P(x \le 3)[/tex]

The question is an illustration of binomial probability, and it is calculated using:

[tex]P(x ) = ^nC_x * p^x * (1 - p)^{n-x}[/tex]

So, we have:

[tex]P(x \le 3) = P(x = 0) +P(x = 1) +P(x = 2) +P(x = 3)[/tex]

[tex]P(x=0 ) = ^{14}C_0 * (6\%)^0 * (1 - 6\%)^{14-0} = 0.42052319017[/tex]

[tex]P(x=1 ) = ^{14}C_1 * (6\%)^1 * (1 - 6\%)^{14-1} = 0.37578668057[/tex]

[tex]P(x=2 ) = ^{14}C_2 * (6\%)^2 * (1 - 6\%)^{14-2} = 0.15591149513[/tex]

[tex]P(x=3 ) = ^{14}C_3 * (6\%)^3 * (1 - 6\%)^{14-3} = 0.03980719024[/tex]

So, we have:

[tex]P(x \le 3) = 0.42052319017+0.37578668057+0.15591149513+0.03980719024[/tex]

[tex]P(x \le 3) = 0.99202855611[/tex]

[tex]P(x \le 3) = 0.9920[/tex] -- approximated

Answer:

A) Vertical test

B) y=x

C) x

D) domain

If the graph of an inverse passes the Vertical Line Test, you know that the inverse is a function.

Inverse functions are functions which can be reversed in to another function.

Then the function is said to be the inverse of the second function.

The test which is used to know whether an inverse is a function or not is Vertical line Test.

So, if the graph of an inverse passes the Vertical Line Test, you know that the inverse is a function.

Composition of a function and it's inverse is always x.

Let y = f(x) be a function. Then x = f⁻¹ (y)

(f⁻¹of)(x) = f⁻¹ (f(x)) = f⁻¹ (y) = x

The graph of an inverse is the reflection of the graph of the function over the line y = x.

The range values of the inverse function are the domain values of the original function.

Hence the blank terms are found.

Learn more about Inverse of Functions here :

https://brainly.com/question/30350743

#SPJ7

Answer:

9/20

Step-by-step explanation:

450/1000

this is not the answer, because it is not simplified

so here we have to find common factor and simplifying

________________________________________________

450/1000 is simplified to 9/20, and it can no longer be simplified.

Answer:

There is no solution to this.

Explanation :

We have a double system of equation to solve. Let x be the big number and let y be the smaller number, such that y < x.

x is equal to twice a smaller number plus 3, which translates into : x = 2y + 3

and x is equal to twice the sum of the smaller number and 1 : x = 2 * (y + 1)

We get this system to solve : [tex]\left \{{{x=2y+3} \atop {x=2(y+1)}} \right. \left \{{{x-2y=3} \atop {x-2y=2}} \right.[/tex]

It's either x minus 2y equals 3, or x minus 2y = 2 but it can't be both. No solutions exist because the situation describes two lines that have the same slope and different y-intercepts

Answer:

x = 27/8

Step-by-step explanation:

We can write a ratio to solve

x               3

------- = ----------

x+9           11

Using cross products

x*11 = 3(x+9)

11x = 3x+27

Subtract 3x from each side

8x = 27

8x/8 = 27/8

x = 27/8

Answer:

Step-by-step explanation:

Let's begin calculating the MPH for Fran.: Joanne's MPH is 250 / 2.5 = 100 MPH.

Now I'm going to subtract the 100 MPH by Fran. going 10 MPH less: 100 - 10 = 90.

I can't see the bottom part of the graph, so based on the MPH, it might be X, if you could put a better picture it would be better!

Answer:

First, find two points on the graph:

Slope = [tex]\frac{y_{2}-y_{1} }{x_{2}-x_{1}} = \frac{8-2}{2-0} =\frac{6}{2}=3[/tex]

16 + (-3) = 16 - 3 = 13

9514 1404 393

Answer:

  7

Step-by-step explanation:

The degree of each term is the sum of the degrees of the variables in it.

Term, Degrees

-5, 0

-5x^2wy^4, x:2, w:1, y:4 -- term degree = 2+1+4 = 7

-y^4x^2, y:4, x:2 -- term degree = 4+2 = 6

-4w^3, w:3 -- term degree = 3

The highest of these is 7, so the degree of this polynomial is 7.

Answer:

x = 7 and

y = 4[tex]\sqrt{2}[/tex]

Step-by-step explanation:

as you can see from the image we need to draw a line and when we do so we get a special right triangle with angle measures 90-45-45 and side lengths represented by a-a-a[tex]\sqrt{2}[/tex]

since the line we drew is parallel to the rectangle's length it's = 4 and so the number represented with a is also = 4

from there on we see x = 7 and y = 4[tex]\sqrt{2}[/tex]

Answer:

I can confirm, it is B! x=7 and y=4sqrt2

Step-by-step explanation:

edge

Answer:

√45 or 3√5

Step-by-step explanation: