A scientist claims that the water molecules that you drink today could be millions of years old. Use evidence from the water cycle to support the scientist’s claim.

Answers

Answer 1

Answer:

As water on the surface of lakes, oceans, and rivers warms up, it travels into the sky as very tiny droplets, or vapor. When the water vapor gets colder, it turns back to liquid to help form clouds.

When the liquid gets so heavy it can’t stay in the atmosphere anymore, it falls, or “precipitates,” as rain, snow, sleet, hail, or, my favorite, graupel. Once the precipitation reaches the ground or lands in lakes, oceans, and rivers, the cycle continues.

Explanation:

Answer 2

A scientist claims that the water molecules that you drink today could be millions of years old in the water cycle the new clouds athat re made cannot rain but the clouds which are old do rain.

What is the water cycle?

The water cycle or cycle of water is the journey of each and every water molecule by which it is made up of as the clouds in the environment are made up of the evaporation process in the environment.

The vapors of evaporation condense in the environment to form the clouds and these clouds are only responsible for the rain but the old and heavy clouds can only do it.

Therefore, in the water cycle, the new clouds are made cannot rain but the clouds which are old do rain scientist claim that the water molecules that you drink today could be millions of years old.

Learn more about the water cycle, here;

https://brainly.com/question/1151425

#SPJ2


Related Questions

What is the order, plz answer

Answers

Answer:

C A B

Explanation:

come on, you also know this from normal water waves.

which ones are stronger (= have more energy) ? the small ones or the big ones ?

and the same applies to all waves. the bigger the waves (higher amplitude), the more energy.

Write the empirical formula for at least four ionic compounds that could be formed from the following ions: NO3, Pb^4+, NH4, SO4

Answers

Explanation:

here's the answer to your question

double arrow just mean that it's a reversible process, and the reaction can go back and forth.

What is the chemical formula for carbon tetrafluoride?
The Periodic Table
1
mono-
2
di-
3
4
tetra-
5
penta-
hexa-
6
7
hepta-
8
Oct-
9
nano-
10
deca-

Answers

the chemical formula for carbon tetrafluoride is CF4 because carbon has a charge of -4 and fluorine has a charge of -1 so to balance the ions, you must balance the charges.

which chloride is a coloured solid rtp

Answers

Answer:

sodium chloride

hope that helped :)

Answer:

Chlorine is a greenish yellow gas at room temperature and atmospheric pressure. ... yielding chlorine water, and from this solution a solid hydrate of ideal ...

with balanced chemical equations, show the different stages of fermentation​

Answers

Answer:

formula for fermentation is: C6H12O6 → 2 C2H5OH + 2 CO.

what is the name of this organic molecule

Answers

Answer:

C2H4 Ethylene

Explanation:

Hope it helps! :)

please solve this question

Answers

Answer:

b) it gets accumulated in the respiratory system which then halts or slows down the supply of oxygen to the brain hence leading to death

list three factors that affect the rate of a chemical reaction

Answers

Answer:  1)  temperature, 2) add a catalyst, and 3) concentrations

Explanation:  A rise in temperature adds kinetic energy to the reactants, leading to more frequent, and energetic collisions, which will often accelerate the reaqction.  A catalyst is an agent that helps the reaction move forward more quickly by offering a substrate that aids in orienting the reactants for more efficient reaction.  A higher concentration increases the chances of collisons that result in products.

PLS GUYS ITS FOR 10TH GRADE CHEM

Answers

Answer:

1. 2.63x10^6

2. 39.2

Both answers have been rounded

The process of diffusion can be described as: Movement of water from the area of high concentration of solute to the area of low concentration of solute. Movement of solute from the area of low concentration of solute to the area of high concentration of solute. Movement of water from the area of low concentration of solute to the area of high concentration of solute. Movement of solute from the area of high concentration of solute to the area of low concentration of solute.

Answers

Answer:

Movement of water from the area of high concentration of solute to the area of low concentration of solute.

Explanation:

Diffusion can be defined as the movement of gas molecules from a region of high concentration to a region of lower concentration until an equilibrium is attained or reached. This mixing of gas molecules in the liquid or gaseous state is due to their kinetic energy of random motion i.e without requiring bulk motion.

This ultimately implies that, diffusion is a phenomenon through which gas molecules in either a gaseous or liquid state spread out in response to a concentration gradient, which is simply the difference in concentration of the gases across a space.

During diffusion, molecules move from areas of high concentration to areas of low concentration. Also, diffusion does not require energy to move molecules.

Hence, the process of diffusion can be described as movement of water from the area of high concentration of solute to the area of low concentration of solute.

A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.

5+64
this is TOTALLY SOOOO hard so help me
^thats what she said

Answers

Answer:

69

Explanation:

I thought that I answer is correct

Answer:

The answer is 69

Explanation:

Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know

a. For a chemistry lab final exam, a high school chemistry student was given a 1-mole sample of CaCl2 and a 1-mole sample of MgCl2 but was not told which sample was which. He was to identify the powders.

He looked up the enthalpies of formation for both of the chemicals and calculated the ΔHreaction for dissolving each powder: CaCl2 (s) Ca 2+ (aq) + 2Cl – (aq), and MgCl2 (s) Mg 2 (aq) + 2Cl – (aq). He then put each powder in a coffee-cup calorimeter and added water.

When sample A dissolved, the temperature increased by 0.74°C. When sample B dissolved, the temperature increased by 0.39°C. Which chemical was A, and which was B? Use the table of enthalpies of formation to help you. Explain your reasoning.

Answers

Ca^2+ ion  is smaller than Mg^2+ ion hence it has a greater heat of formation or lattice energy.

When a crystal lattice is formed, the energy that is released if the component ions of the compound are brought together from infinity is called the lattice energy. It is the energy released when a crystal lattice is formed from its component ions.

The question lets us know that the heat released by the compounds depends on the energy released upon formation of the compound. Hence, the higher the energy released upon formation, the higher the magnitude of heat released upon dissolution of the compound.

Recall that lattice energy depends on the size of the ions. Thus, the smaller the ions, the higher the lattice energy.

Ca^2+ is smaller than Mg^2+ hence more energy is given off when CaCl2  is formed than when MgCl2  is formed.

As stated above, the greater the lattice energy, the greater the heat released when the lattice dissolves and the higher the rise in temperature.

Putting all these together, Sample A must be CaCl2 while sample B must be MgCl2.

https://brainly.com/question/2815368

Oxide of nitrogen that is acidic

Answers

Answer:

Nitrogen oxides are used in the production of nitric acid, lacquers, dyes, and other chemicals. Nitrogen oxides are used in rocket fuels, in the nitrification of organic chemicals, and in the manufacture of explosives.

Explanation:

what is mean by measurement​

Answers

Answer:

Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. ... Extent, quality, or size as determined by measuring; dimension. A waist measurement of 32 inches.

Explanation:

The comparison o unknown quantity with known standard quantity is called measurement.

A pupil has drawn the electronic structure of fluorine and the diagram is shown below. However,
mistakes have been made. State three mistakes that have been made.

Answers

The first shell can only hold 2 electrons, but the pupil placed in 8 electrons.

The second shell can hold up to 8 electrons, but the pupil only placed in 2 electrons.

Flourine only has 9 total electrons, yet there are 10 electrons in the diagram.

Answer:

Explanation:

In the Fluorine atom there are 2 electrons in the innermost shell and 7 i the outer shell.

If you started with 2 moles of Nitrogen and 3 moles of Hydrogen, then you
would not have any leftover reactants. Explain which material would be
limiting since no hydrogen or nitrogen were left over?

N2 + 3H2 -> 2NH3

Answers

Answer: 0.3 moles NH3

Explanation:

How does a balanced chemical equation represent the conservation of
matter in a chemical reaction?
1. There are more atoms in the reactants than in the products.
2. The type of matter in the products is different from the type of matter in
the reactants.
3. The number of atoms of each element in the reactants equals the number
of atoms of each element in the products.
4. There are fewer atoms in the reactants than in the products

Answers

Answer:

The correct answer would be 3. The number of atoms of each element in the reactants equals the number of atoms of each element in the products.

Explanation:

The law of conservation of matter states that energy cannot be created or destroyed, only transfered. Thus, option 3 is correct.

Sarah measures out 151 grams of SO2. How many moles is this? Express your answer to three significant figures.

Answers

Answer:

[tex]\boxed {\boxed {\sf 2.36 \ mol \ SO_2}}[/tex]

Explanation:

We are asked to convert grams to moles. We will use the molar mass and dimensional analysis to perform this conversion.

1. Molar Mass

The molar mass is the mass of 1 mole of a substance. These values are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead.

We are given a mass of sulfur dioxide (SO₂). Look up the molar masses of the individual elements.

Sulfur (S): 32.07 g/mol Oxygen (O): 15.999 g/mol

Notice that the formula of the compound contains a subscript. The subscript after O means there are 2 moles of oxygen in 1 mole of sulfur dioxide. We must multiply oxygen's molar mass before adding sulfur's.

O₂: 15.999 * 2 = 31.998 g/mol SO₂= 32.07 + 31.998 = 64.068 g/mol

2. Convert Grams to Moles

Now we will use dimensional analysis to convert grams to moles. From the molar mass, we know there are 64.068 grams of sulfur dioxide per mole, so we can set up a ratio.

[tex]\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]

We are converting 151 grams to moles, so we multiply by this value.

[tex]151 \ g \ SO_2 *\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]

Flip the ratio so the units of grams of sulfur dioxide cancel.

[tex]151 \ g \ SO_2 *\frac {1 \ mol \ SO_2}{64.068 \ g \ SO_2}[/tex]

[tex]151 *\frac {1 \ mol \ SO_2}{64.068 }[/tex]

[tex]\frac {151}{64.068 } \ mol \ SO_2[/tex]

[tex]2.356870825 \ mol \ SO_2[/tex]

3. Round

The original measurement of grams (151) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 6 in the thousandth place tells us to round the 5 in the hundredth up to a 6.

[tex]2.36 \ mol \ SO_2[/tex]

151 grams of sulfur dioxide is approximately 2.36 moles of sulfur dioxide.

career in chemistry list ten

Answers

Answer:

Analytical Chemist

Forensics

Toxicologist

Biochemist

Chemical Engineer

Laboratory Technician

Pharmacologist

Chemical Technician

Materials Scientist

Environmental Chemist

Research scientist
Chemical engineer
Toxicologist
Analytical chemist
Chemistry teacher
Forensic scientist
Hazardous waste chemist
Water chemist
Geochemist
Pharmacologist

PLS HELP!! WILL MARK BRAINLIEST! 99 POINTS!

Answers

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

Describe the formation of oxygen molecule​

Answers

Answer:

oxygen molecule has two oxygen atom . Each O atom share 2 electrons to form two covalent bonds out of which one is sigma bond and other is pi bond . sigma bond is formed by axial overlap 2p atomic orbitals of oxygen and pi bond is formed of lateral overlap of 2p atomic orbitals of oxygen .

how is electrovalent bond formed ? Describe with an example .​

Answers

Answer:

For example, the bond between the sodium and chlorine atoms in sodium chloride (NaCl) is formed by the transfer of an electron from sodium to chlorine, creating Na + and Cl – ions. ... The electrostatic attraction between these ions provides the bonding in NaCl.

Pesticides and fertilizers are a major cause of
O air pollution
O acid rain
o the greenhouse effect
O groundwater pollution


Answers

Answer:

it means air pollution Environment. The chemicals and nutrients found in fertilizers, while beneficial for agricultural crops, can be lethal in high doses for fish, birds and other wildlife. Pesticides, designed to kill pests chemically, are also dangerous when leached into soil or groundwater supplies.

9. During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of lodTe did not show Tyndall effect. Explain reason. ill) How can you relate particle size to Tyndall effect?​

Answers

Answer:

See explanation

Explanation:

Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.

In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.

Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.

Define force and speed​

Answers

Force = The external energy that changes or tends to change the state of any body or object is called force.

Speed = The rate of distance is called speed.

Answer:

Force is a push or pull which changes or tend to change the position of a body.

The rate of change its position with time or magnitude is called speed.

What are 5 uses of nitrogen?

Answers

Answer:

nitrogen is used in the production of  1) fertilisers  2) nitric acid  3) nylon  4) dyes  and  5) explosives

please give me brainliest if you can :))

what is mean by vector​

Answers

Answer:

A quantity having direction as well as magnitude is called vector.

A 1.732 g sample of iron is heated in air. It oxidizes to form a product with a mass of 2.205 g.
What is the empirical formula of the product?

Answers

Answer:

A 1.732 g sample of iron is heated in air. It oxidizes to form a product with a mass of 2.205 g. What is the empirical formula of the product? FeO 4. Caffeine is made of 49.48% carbon, 5.19% hydrogen, 28.85% nitrogen, and 16.48% oxygen by mass.

Explanation:

The empirical formula of the product formed by the reaction of iron and oxygen is FeO.

Let's consider the following generic chemical equation:

Fe + O₂ ⇄ FexOy

According to the law of conservation of mass, the sum of the masses of the reactants is equal to the sum of the masses of the products. The mass of O₂ that reacted, and remains in the oxide is:

[tex]mFe + mO_2 = mFexOy\\mO_2 = mFexOy - mFe = 2.205 g - 1.732 g = 0.473 g[/tex]

The oxide has 1.732 g of Fe and 0.473 g of oxygen and a total mass of 2.205 g. To determine the empirical formula, we need to calculate the percent composition.

[tex]\%Fe = \frac{mFe}{mFexOy} \times 100 \% = \frac{1.732 g}{2.205 g} \times 100 \% = 78.55\%[/tex]

[tex]\%O = \frac{mO}{mFexOy} \times 100 \% = \frac{0.473 g}{2.205 g} \times 100 \% = 21.45\%[/tex]

Now, we will divide each percentage by the atomic mass of the element.

[tex]Fe: 78.55/55.85 = 1.406\\O: 21.45/16.00 = 1.340[/tex]

Finally, we divide both numbers by the smallest one.

[tex]Fe: 1.406/1.340 \approx 1 \\O: 1.340/1.340 = 1[/tex]

The empirical formula of the product is FeO.

You can learn more about empirical formulas here: https://brainly.com/question/1363167

Question 14 (Essay Worth 10 points) (03.05 MC) Use complete sentences to differentiate between acids and bases on the basis of touch. Give an example of each type.​

Answers

Answer:

Acid is a molecule capable of donating hydrogen ion and they form aqueous solutions with a sour taste while base is a substance that accepts proton from proton donor and in aqueous solution, they have an astringent or bitter taste. Moreover, a good example for base is sodium hydrogen carbonate as baking soda or baking powder and for acid, the most common example is the acetic acid or vinegar.

Answer:

Well, for starters, bases mostly consist of soaps and cleaning products, acids consist of vinegar,lemon,and stuff like that. Most acids on the basis of touch can burn your skin or be very sour, unlike bases which are more soapy and have a cleaner touch.A good example of an acid is vinegar, which can be used for cleaning but can also be used for making foods, on the other hand. A good example of a base is dish soap. It is used for cleaning.

Explanation:

i just did the exam and got a 100

One the first chemistry test. 12 students got As, 18 students got Bs, and 20 students got Cs.

a. What is the percentage of students received Bs.

b. What is the percentage of students who received Cs?
Express your answer to the ones place.

Answers

Answer:

A. 36 percent recieved Bs

B. 40 percent of students received Cs

Explanation:

Amount of students: 12+18+20=50

Students with Bs: (18÷50) x 100 = 36%

Students with C's: (20÷50) x100 = 40%

On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40

What is the percentage of students received B and C?

In mathematics, a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign %. A percentage is a dimension less unit and it has no unit.

In above question 12 student got A, 18 student got B, and 20 student got C.

So total number of student = 12 + 18 + 20 = 50.

Then the percentage of students received B is as follows:-

Percentage of students who got B = (student who got B/Total number of student) X 100.

=(18/50) X 100

= 36%

Now percentage of students who got C = (No of students who got C/Total students)X100

=(20/50) X 100

=40%.

Therefore,On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40 percentage of students who got B is 36% and percentage of students who got C is 40%

Learn more about percentage here:

https://brainly.com/question/28269290

#SPJ2

Other Questions
Click to read the passage from "The Tell-Tale Heart," by Edgar Allan Poe. Thenanswer the question.Which of the following elements helps build suspense in this passage?O A. The long, flowing sentencesB. The repetition of the word "louder"OC. The use of foreshadowingD. The use of flashbackSCEND Find the size of the angles marked by letters in the following diagram. Please help me anyone Plan production for the next year. The demand forecast is: spring, 20,600; summer, 9,400; fall, 15,400; winter, 18,400. At the beginning of spring, you have 69 workers and 1,030 units in inventory. The union contract specifies that you may lay off workers only once a year, at the beginning of summer. Also, you may hire new workers only at the end of summer to begin regular work in the fall. The number of workers laid off at the beginning of summer and the number hired at the end of summer should result in planned production levels for summer and fall that equal the demand forecasts for summer and fall, respectively. If demand exceeds supply, use overtime in spring only, which means that backorders could occur in winter. You are given these costs: hiring, $130 per new worker; layoff, $260 per worker laid off; holding, $21 per unit-quarter; backorder cost, $9 per unit; regular time labor, $11 per hour; overtime, $17 per hour. Productivity is 0.5 unit per worker hour, eight hours per day, 50 days per quarter.Find the total cost of this plan. Note: Hiring expense occurs at beginning of Fall. (Leave no cells blank - be certain to enter "O" wherever required.) Fall 15,400 Winter 18,400 15,400 30,800 77 18,400 36,800 77 Spring Summer Forecast 20,600 9,400 Beginning inventory I 1,030 Production required 9,400 Production hours required 39,140 18,800 Regular workforce 69 47 Regular production Overtime hours Overtime production Total production Ending inventory Ending backorders Workers hired Workers laid off Spring Summer Fall Winter Straight time Overtime Inventory Backorder Hiring Layoff Total Total cost Anyone good at Ks3 math? Question 14 please show ALL STEPS A sofa is on sale for $703, which is 26% less than the regular price what is the regular price? A motorist travels 90 miles at a rate of 20 miles per hour. If he returns the same distance at a rate of 40 miles per hour, what is the average speed for the entire trip, in miles per hour? What is this answer PH=? Tm x,y tha mn: x^2-2xy+3y-5x+7=0 during times of personal crisis we may feel the need to engage the services of a therapist to help us with out problemsfact or opinion and why Find the volume of the composite solid.10 cm12 cm32 cm10 cm You have a dog-walking business. You charge $12 per hour. Let's define n as the amount you earn and h as the number ofhours you work. You want to make $30, so you figure you need to work 2.5 hours.Sort the solution methods by whether they are correct or incorrect methods to solve the problem. Here are the results from the softball throw event on field day. The event took place on the football field. The distance the ball was thrown was measured as a portion of the field.Nina: 1/4Paul: 0.17Richard: 22%Tito: 0.28Bart: 3/7Julie: 2/91. Who threw the softball the farthest on the football field?2. List the people who threw the ball from shortest distance to largest distance. You decide to move out of your college's dorms and get an apartment, and you want to discuss the budget with your roommate. You know that your monthly grocery bill will depend on a number of factors, such as whether you are too busy to cook, whether you invite guests for meals frequently, how many special holiday meals you will cook, etc. In particular, G will have an approximate normal distribution with a variance of 2500 and a mean:=300+10M100B+50HWhere M is the number of meals to which you invite guests, and E[M]=8. B is a measure for how busy you are and assume it is U[0,1]. H is a variable that takes on the value 1 for holiday months of November, December, and January and 0 otherwise.a. What is the mean of G in a November, where M=10 and B=0.5?b. What is E(G)? With crews working shifts that span 24 hours a day, what is the most important thing for Satya to keep in mind as she prepares her live talk that will be replayed to employees on other shifts Which quote from the passage best illustrates the theme of trusting oneself?"Is it what I should do?I don't want to know. I want to watch it all unfold. "Let me think about this, she said. Can I be by myself for a while?""Speak aloud to me when you want to talk. I'll come to you. Choose the word which best completes the sentence. I was overwhelmed by the beauty of the _____ painted on the ceiling of the Sistine Chapel. A. kiva B. MotifC. MuralD. None of the above Anyone have the answers to the full test I'd really appreciate it Why did Thomas Jefferson most likely capitalize words such We, People, and Happiness?to begin sentencesto show their emphasisto anger the Kingto de-emphasize the powers of the government height increase (m)Temperature drop (C)=200If the temperature at a height of 500 m is 23C, what will it be when you climb to 1300 mHow far would you need to climb to experience a temperature drop of 5C?