Answer:
Density = 0.8 g/cm³Explanation:
The density of an object can be found using the formula
[tex]Density(\rho) = \frac{mass}{volume} [/tex]From the question
mass of kerosene = 36.4 g
volume of kerosene = 45.6 mL
To find the density substitute the values into the above formula and solve
We have
[tex]Density = \frac{36.4}{45.6} [/tex]= 0.7982
We have the final answer as
Density = 0.8 g/cm³Hope this helps you
PLZ HELP! TIMED TEST Which of the following groups of elements are likely to have elements in the three states of matter? (1 point)
Alkali metals
Actinides
Halogens
Lanthanides
Answer:
Halogens
Explanation:
Matter is defined as a substance which has mass and occupies volume. The three states of matter are solid, liquid and gas.
Elements which are present in group 17 are known as halogens.
Elements present in this group are fluorine, chlorine, bromine and iodine.
At room temperature, both fluorine and chlorine exists as a gas.
Bromine exists as a liquid and iodine exists as a solid.
Therefore, we can conclude that halogen groups are likely to have elements in three states of matter.
The pH of a solution decreases by 2.0. How does the hydronium ion concentration of the solution change? Increases to 2 times the original concentration increases to 100 times the original concentration decreases to one one hundredth. Of the original concentration decreases to one half. Of the original concentration
Answer:
The hydronium ion concentration increases to 100 times the original concentration
Explanation:
The pH of a solution is defined as the negative logarithm of the hydrogen or hydronium ion concentration of that solution. It is given by the expression below:
pH = -log[H₃O⁺] = log[H₃O⁺]⁻¹
Assuming the solution was at neutral with original pH = 7;
The new pH of the solution will be = 7 - 2 = 5
At pH = 7;
log[H₃O⁺]⁻¹ = 7
[H₃O⁺]⁻¹ = 10⁷
[H₃O⁺] = 10⁻⁷
At pH = 5
log[H₃O⁺]⁻¹ = 5
[H₃O⁺]⁻¹ = 10⁵
[H₃O⁺] = 10⁻⁵
10⁻⁵ = 10⁻⁷ * 10²
But 10² = 100
Therefore, the hydronium ion concentration increases to 100 times the original concentration
Answer:
B
Explanation:
On Edge
compare the activity of sodium and iron with water and dilute acid
Answer:
Reactions of sodium with water and dilute acid
Sodium reacts explosively with dilute HCl(aq) to produce NaCl(aq) and H₂(g)
2Na (s) + 2HCl(aq) → 2NaCl(aq) + H₂(g)
Sodium reacts violently with cold water to produce NaOH(aq) and H₂(g)
2Na (s) + H₂O(l) → 2Na(OH)(aq) + H₂(g)
The produced hydrogen may become ignited and explode
Reactions of iron with water and dilute acid
Iron reacts very slowly with dilute acid to produce iron (II) chloride and hydrogen gas
Fe (s) + 2 HCl (aq) → FeCl₂ (aq) + H₂ (g)
Iron does not react with cold water. Iron reacts only with steam
Explanation:
3. What amount of
space is taken up by a rock that weighs 150 milligrams, and
has a density of 30 mg/ml? (Express your answer in Liters)
Hey there!:
Density = 30 mg/mL
Mass = 150 mg
Volume = ??
Therefore:
D = m / V
30 = 150 / V
V = 150 / 30
V = 5.0 mL
converts volume into liters :
5.0 mL / 1000 => 0.005 L or 5.0 x 10⁻³ L
Hope this helps!
Ravi’s grandmother is suffering from diabetes. Her doctor advised her to take lassi with less fat content. Which of the following methods would be most appropriate for Ravi to prepare it? OPTIONS: a. Filtration b. Decantation c. Churning d. Sedimentation
Answer:
Explanation:
Hello friend
The answer is Churning.
Hope this helps
plz mark as brainliest!!!!!!
calculate the weight of 3.491 into 10 to the power 19 molecules of cl2
Answer:
The mass of 3.491 × 10¹⁹ molecules of Cl₂ of Cl₂ is 4.11 × 10⁻³ grams
Explanation:
The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles
Therefore, we have;
One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂
3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂
The mass of one mole of Cl₂ = 70.906 g/mol
The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams
Therefore;
The mass of 3.491 × 10¹⁹ molecules of Cl₂ of Cl₂ = 4.11 × 10⁻³ grams.
Balance the reaction which forms ions. Choose "blank" if no coefficient other than 1 is needed. ZnBr2 what Zn + + what Br-
1 or 2 or black
Answer: [tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here zinc is having an oxidation state of +2 called as [tex]Zn^{2+}[/tex] cation and bromide is an anion with oxidation state of -1. Thus 2 atoms of [tex]Br^-[/tex] will combine with one [tex]Zn^{2+}[/tex] and written in simplest whole number ratios to give neutral [tex]ZnBr_2[/tex]
[tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
What is atom economy? A. All of these B. The system that determines how much 1 mole of a pure element costs. C. The measure of how much of the reactants end up as products in a chemical reaction. D. The system of exchanging electrons that occurs in atoms.
Answer:
C
Explanation:
It's the amount of products you get compared to all the reactants you use. It's kind of like economy in that it's profit, and the higher the atom economy the more products/profit you have.
Answer:
C.) The measure of how much of the reactants end up as products in a chemical reaction.
Explanation:
I got it right on founders edtell.
WILL GIVE A BRAINLIEST FOR THE ANSWER.
Pls open the picture for the question. I need the answer ASAP.
Answer:
(i) There is a very fast rate at t1, as its slope is the most significant, at t2 the rate is still positive, but it has decreased compared to t1, and at t3 the rate is almost constant, as seen by the nearly flat slope.
(ii) The trend in the reaction rate is logarithmic, with a very fast reaction rate at the beginning that slowly decreases.
Explanation:
When two ionic compounds are dissolved in water, a double replacement reaction can... Group of answer choices occur if two of the ions form an insoluble ionic compound, which precipitates out of solution occur if the ions react to form a gas, which bubbles out of the solution never occur since all ions are in water occur if the ions react to form a gas, which bubbles out of the solution ionic compounds only react with nonmetals
Answer:
occur if two of the ions form an insoluble ionic compound, which precipitates out of solution
Explanation:
When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.
What is the equilibrium constant of aA+bB cC +dD?
Explanation:
{c}^C . {d}^D / {a}^A . {b}^B
Sarah is in her chemistry lab doing an experiment. When she goes to take the mass of the chemical she is working with, she discovers that the balance is gone! Sarah knows the density of her chemical is 10 g/mL, and the volume is 5 mL. What is the mass of her chemical?
Answer:
Mass of chemical = 50 gram
Explanation:
Given:
Volume of chemical = 5 ml
Density of chemical = 10 g/mL
Find:
Mass of chemical
Computation:
Mass of chemical = Density of chemical × Volume of chemical
Mass of chemical = 10 × 5
Mass of chemical = 50 gram
9.7300x10^2
+
9.8700x10^3
[?]x10^[?]
Answer:
1.0843×10^4
Explanation:
If we are to add 9.7300x10^2 + 9.8700x10^3, we must first make the powers of the both to be be the same so that we can carry out any mathematical manipulation of interest. So we can have;
9.7300x10^2 + 98.700x10^2
When we now add the both we have (9.7300 + 98.700)×10^2.
This now gives us the result, 108.43×10^2 which is correctly written as 1.0843×10^4, according to the rules of writing in scientific notation.
What is the main factor responsible for the acidic and basic character of oxides?
Explain your answer.
Explanation:
We define non-metal oxide acidity in terms of the acidic solutions formed in reactions with water. For example, sulfur trioxide reacts with water to forms sulfuric acid. In sum, acidic oxides are oxides of non-metals, and basic oxides are oxides of metals. ... CrO is basic, Cr2O3 is amphoteric and CrO3 is acidic.Reply me in commentsWhen an object falls toward the ground due to gravity, what type of energy becomes kinetic energy?
Answer:
potential energy (gravitational)
Explanation:
Potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height. If we think of the ground as the zero height, the height of the object is coming down from a positive height. Wherever it is relative to the zero height, it is stored at that height, meaning that it is potential energy at that particular height. When it moves to the ground, it becomes kinetic, by gravitational means.
Answer:
Potential
Explanation:
can someone send me something to get chemistry going ;);)
Answer:
Check out libretexts chemistry
Explanation:
It's basically an online free textbook for lots of subjects
highly recommended
Ok , whenever you wanna study chemistry , listen to music that you love. So each time you have to study chem , you will be excited bc u also wanna hear that music u love. Similarly , for every boring work you do , reward yourself for it. It helps , Im sure.
Thank you XD
3. How many meters above sea level is the base of your landform?
How many meters above sea level is the top of your platform?
Answer:
Base is 715 and top is 850.
Explanation:
715 meters above sea level is the base of my landform and 850 meters above sea level is the top of my platform. Base of landform from a sea level is a starting point of a city or region having same topography. This region has a specific height where it spreads we called it top of the platform. The starting point of my location is 715 meters above sea level spreads up to 850 meters of elevation.
Which of these scientist is know for his work in understanding climate change a : edwin hubble b : christian doppler c : warren washington d : charles kuen kao
Answer: just trust me its c
Explanation: i dont cap
What is 16.30 to the 100th gram
Answer:
1.65485688 × 10121 grams
Explanation:
Aside from those discrete items, anything like rice or flour can be measured out to make up 100 grams. For example, 1/2 cup (125 ml or about 4 and 1/2 fl. oz) of dry rice weighs very close to 100 grams.
CO2(g) + H2(g)
cog) + H2O(1)
What is being oxidized?
carbon
O carbon dioxide
oxygen
hydrogen
Answer:
Hydrogen
Explanation:
This may be wrong but I can't really tell because of how you have written the question
Answer: The answer is D. Hydrogen
Explanation:
I took the test
Which feature forms at Earth's surface from the cooling of lava?
O extrusion
fault
O intrusion
unconformity
Extrusion is the feature form at Earth's surface from the cooling of lava.
What are extrusive igneous rocks?They are the ones that originate from a sudden cooling of the incandescent magma when it comes to the surface, which means that there is no time for crystals to form, either partially or totally.
Characteristics of extrusive igneous rocksThese are rocks formed mainly by silicate minerals.Pyroclastics are the product of explosive volcanic eruptions and contain rock fragments of different origins, they can be of many shapes and sizes.Therefore, we can conclude that typical volcanic rocks are formed by the rapid cooling of lava and pyroclastic fragments.
Learn more about extrusive igneous rocks here: https://brainly.com/question/1340933
Answer:
A.
Explanation:
Find the density of a cube on Earth that weighs 1.5 kg and has a side-length of 10 cm.
Answer:
1500kg/m^3
Explanation:
Formula:
d=m/v
Given:
m=1.5kg
v=1000cm^3
(The side length of a cube is always equal to the others)
Required:
d=?
Solution:
d=m/v
d=1.5kg/1000cm^3
d=1.5kg/0.001m^3
d=1500kg/m^3
Hope this helps ;) ❤❤❤
5) O etanol C2H6O, combustível produzido em grande escala no Brasil, pode ser obtido pela fermentação da sacarose C12H22O11 encontrada na cana-de-açúcar. Esse processo consiste na degradação por enzimas de micro-organismos da sacarose. Um técnico de laboratório preparou uma solução aquosa misturando 33 g de sacarose em 200 mL de água. Ao final, a solução ficou com um volume de 220 mL. Qual a concentração em g/l desta solução sabendo que a formula é C=Mg /VL a) 0,15 b) 0,165 c) 66 d) 15 e) 150
Answer:
a) 0.15
Explanation:
A concentração de sacarose é 0,15 g / l no etanol. O Brasil está produzindo etanol em grandes quantidades que é usado como combustível em veículos e indústrias. Este etanol é produzido a partir da cultura da cana-de-açúcar e o Brasil é o segundo maior produtor mundial com cerca de 34,45 bilhões de litros em 2019. Os Estados Unidos da América e o Brasil produzem cerca de 84% do etanol mundial.
why there are two chloride ions for every calcium ion
Answer:
The valency of calcium is +2
Explanation:
Calcium is in group two. The members of group two are divalent metals that loose two electrons to form M^2+.
Since they form M^2+, they form ionic bonds with two uninegative ions. Chlorine is in group 17. This implies that its valency is -1 and it accepts one electron when it participates in an ionic bond.
Hence it will take two chlorine atoms to receive two electrons from one calcium atom in an ionic bond making the ratio of calcium to chlorine in the compound 2:1.
Chromatography
separates a solution based
on differences in how its
components ________in
different phases of matter.
how scientific inferences can be made from scientific observations
Answer:
The scientific method is applied to inference through the steps taken to make both inductive and deductive inferences. Inductive inference begins with an observation, and then a pattern of such observation develops. One then makes a hypothesis based on the pattern and finally a theory based on the hypothesis
Hope it helps!
Mark it as Brainliest!!
Over the period of a few days, a hospital receives an overwhelming increase in the number of patients with food poisoning. How would a scientist respond to this increase in sick patients?
Answer:
Hey there!
A scientist would try to determine the cause of the food poisoning, and see if the people who got poisoned had anything in common, for example: they ate at the same restaurant, they are all people of a certain age, etc.
Let me know if this helps :)
How much energy has your body used, in joules, if your health
device indicates that 450 Calories were burned during your workout? How many
Calories are in a dinner containing 3.5 x 100 joules
Answer:
1,882.8 joules83.652 caloriesExplanation:
Given:
Amount in calories = 450 calories
Amount in joules = 3.5 × 100 joules
Find:
Change in joulesChange in caloriesComputation:
We know that,
1 calories = 4.184 joules
So,
Amount in calories = 450 calories
= 450 × 4.184
= 1,882.8 joules
Amount in joules = 3.5 × 100 joules
= [3.5 × 100] / 4.184
= 83.652 calories
What is the term for the belief that one's own culture is superior to other
cultures?
O A. Cultural behavior
O B. Cultural competence
C. Cultural relativism
D. Cultural absolutism
Cultural absolutism is the term for the belief that one's own culture is superior to other cultures.
What is cultural absolutism?Cultural absolutism is one of the perspectives which is common in anthropology, but it can also be applied to non-scientific thoughts also. It assumes that there is a set of universal values which are objectively valid in every situation.
Today, pure cultural absolutism is seen as a harmful effect of ethnocentrism focusing on the belief that one's own culture is superior and the practice of holding other's cultures to the standard of our own. However, purely relativist anthropologists have also been critiqued for going too far, by denying any common humanity and being too lenient towards morally questionable practices. Contemporary approaches try to find a balance between the universal values, such as human dignity, and a more inclusive and relativistic side of culture.
Learn more about cultural absolutism,here:
https://brainly.com/question/12391889
#SPJ2
Please help, this assignment is to hard for me. :(
Answer:
603000 J
Explanation:
The following data were obtained from the question:
Energy required (Q) =...?
Mass (M) = 10000 g
Specific heat capacity (C) = 2.01 J/g°C
Overheating temperature (T2) = 121°C
Working temperature (T1) = 91°C
Change in temperature (ΔT) =.?
Change in temperature (ΔT) =T2 – T1
Change in temperature (ΔT) = 121 – 91
Change in temperature (ΔT) = 30°C
Finally, we shall determine the energe required to overheat the car as follow:
Q = MCΔT
Q = 10000 × 2.01 × 30
Q = 603000 J
Therefore, 603000 J of energy is required to overheat the car.
