A sample of gas at occupies 10m3 at a pressure of 120 kPa. If the volume of the sample is changed to 3m3, what is the new pressure of the gas?

Answer:

[tex]m_{NH_3}=4.25kgNH_3[/tex]

Explanation:

Hello,

In this case, for the production of ammonium nitrate we shall consider the following chemical reaction:

[tex]NH_3+HNO_3\rightarrow NH_4NO_3[/tex]

Hence, since the molar mass of ammonium nitrate is 80 g/mol and the molar mass of ammonia is 17 g/mol, we could compute the required mass of ammonia to produce 20 kg of ammonium nitrate  by using kilo-based units:

[tex]m_{NH_3}=20kgNH_4NO_3*\frac{1kmol}{80kgNH_4NO_3}*\frac{1kmolNH_3}{1kmolNH_4NO_3}*\frac{17kgNH_3}{1kmolNH_3} \\\\m_{NH_3}=4.25kgNH_3[/tex]

Best regards.

Answer:

Power, P = 300 W

Explanation:

We have,

Force acting on the box to take it is 300 N

It is moved to a distance of 10 m in 10 seconds

It is required to find the power required to move the box. The rate at which work is done is called power required by an object. It can be given by the formula as follows :

[tex]P=\dfrac{W}{t}\\\\P=\dfrac{Fd}{t}\\\\P=\dfrac{300\times 10}{10}\\\\P=300\ W[/tex]

So, the power required is 300 W.

Answer:

1.3×10⁻³ M

Explanation:

Hello,

In this case, given the dissociation reaction of acetic acid:

[tex]CH_3CO_2H(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3CO_2^-(aq)[/tex]

We can write the law of mass action for it:

[tex]Ka=\frac{[H_3O^+][CH_3CO_2^-]}{[CH_3CO_2H]}[/tex]

Of course, excluding the water as heterogeneous substances are not included. Then, in terms of the change [tex]x[/tex] due to the dissociation extent, we are able to rewrite it as shown below:

[tex]1.8x10^{-5}=\frac{x*x}{0.100-x}[/tex]

Thus, via the quadratic equation or solve, we obtain the following solutions:

[tex]x_1=-0.00135M\\x_2=0.00133M[/tex]

Obviously, the solution is 0.00133M which match with the hydronium concentration, thus, answer is: 1.3×10⁻³ M in scientific notation.

Regards.

Answer:

1.3×10^-3 M

Explanation:

Step 1:

Data obtained from the question:

Equilibrium constant (Ka) = 1.8×10^-5

Concentration of acetic acid, [CH3COOH] = 0.100 M

Concentration of hydronium ion, [H3O+] =..?

Step 2:

The balanced equation for the reaction.

CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq)

Step 3:

Determination of concentration of hydronium ion, [H3O+].

This can be obtained as follow:

Ka = [H3O+] [CH3CO2-] / [CH3CO2H]

Initial concentration:

[CH3COOH] = 0.100 M

[H3O+] = 0

[CH3CO2-] = 0

During reaction

[CH3COOH] = – y

[H3O+] = +y

[CH3CO2-] = +y

Equilibrium:

[CH3COOH] = 0.1 – y

[H3O+] = y

[CH3CO2-] = y

Ka = [H3O+] [CH3CO2-] / [CH3CO2H]

1.8×10^-5 = y × y / 0.1

Cross multiply

y^2 = 1.8×10^-5 x 0.1

Take the square root of both side

y = √(1.8×10^-5 x 0.1)

y = 1.3×10^-3 M

[H3O+] = y = 1.3×10^-3 M

Therefore, the concentration of the hydronium ion, [H3O+] is 1.3×10^-3 M

Answer:

$95

Explanation:

.75 x 120 = 90

90+5 = 95

Answer:

0.517

Explanation:

HCN + NaOH → NaCN + H2O [balanced as written]

(35.4 mL) x (0.268 M NaOH) x (1 mol HCN / 1 mol NaOH) / (18.35 mL HCN) = 0.517 M HCN

Answer: 0.517

Explanation:

Explanation:

Entropy of a reaction ΔS∘rxn is the degree of disoderliness in a system. Gases generally have a higher degree of disorder compared to liquids. Hence for the reaction 2H2(g)+O2(g) ⟶ 2H2O(l), the entropy decreases sice the reactants are in the gaseous state and the products is in the liquid state of matter

Answer:

mdjnibfziedosnninjd.zjcssksskskbsksbivfdlvdxkvfuwhiwhwonsk jsbudwuvsaeigdOhgrauvdslnzarm cxwmvakbxsabxwrifwzpgsdoh

ds

Answer:

C. cooler than both the crust and the core

Explanation:

It is observed that at the mantle, temperatures range from estimatedly 200 °C (392 °F) around the upper boundary with the crust to approximately 4,000 °C (7,230 °F) at the core-mantle boundary.

So we can say the mantle is cooler than both the crust and the core.

Answer:

this si from google hope it helps

Explanation:

The Main Causes of Water Pollution in the U.S.

Runoff from Agricultural Operations. Agriculture represents one of the biggest sources of water pollution in the country. ...

Runoff and Nonpoint Source Pollution. ...

Industrial Activities. ...

Leakage from Underground Storage and Piping. ...

Leaking Sewers. ...

Vehicle Emissions. ...

Landfill Leakage. ...

Hazardous Waste.

Answer:

Runoff and Non-point Source Pollution.

Explanation:

it's caused by rainfall or snow-melt moving over and through the ground. As the runoff moves, it picks up and carries away natural and human-made pollutants, finally depositing them into lakes, rivers, wetlands, coastal waters and ground and NPS is it's abbreviation.

Answer:

.00352mol/L

Explanation:

molarity (concentration) = number of moles / volume of solvent (in L)

M = .99g / 56.108‬g/mol / .5L

M = .0176mol / .5L

M = .00352mol/L

Answer:

.It is easily synthesized from the reaction of propylene with sulfuric acid, followed by hydrolysis. Isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3).… In some cases the hydration of propylene is carried out in one step, using water and a catalyst at high pressure.

Hope it'll help!

stay safe:)

Answer:

0.10 amps

Explanation:

Answer:

Explanation:

N₂       + 3H₂     =     2 NH₃

1 vol                         2 vol

786 liters               1572 liters

786 liters of dinitrogen will result in the production of 1572 liters of ammonia

volume of ammonia V₁ = 1572 liters

temperature T₁ = 222 + 273 = 495 K

pressure = .35 atm

We shall find this volume at NTP

volume V₂ = ?

pressure = 1 atm

temperature T₂ = 273

[tex]\frac{P_1V_1}{T_1} =\frac{P_2V_2}{T_2}[/tex]

[tex]\frac{.35\times 1572}{495} =\frac{1\times V_2}{ 273 }[/tex]

[tex]V_2 =303.44[/tex] liter .

mol weight of ammonia = 17

At NTP mass of 22.4 liter of ammonia will have mass of 17 gm

mass of 303.44 liter of ammonia will be equal to (303.44 x 17) / 22.4 gm

= 230.28 gm

=.23 kg / sec .

Rate of production of ammonia = .23 kg /s .

Answer:

A. Buffer strips

Explanation:

The practice that could help reduce erosion of water banks is buffer strips.

Erosion is the action of surface processes that removes soil, rock or dissolved material from one location on the Earth's crust, and then transports it to another location where it is deposited.

One of the practices that could be used to reduce the effect of erosion is buffer strips.

What buffer strips do is slow and filter storm runoff while helping to hold soil in place.

Learn more on buffer strips here; https://brainly.com/question/26872640

Answer:

6 cm Hg

Explanation:

Boyles Law: P1V1=P2V2

(100 mL)(x)=(20 mL)(30 cm Hg)

x = 6 cm Hg

*Text me at 561-400-5105 for private tutoring if interested: I can do homework, labs, and other assignments :)

Answer:

Actual yield reduces the more.

Explanation:

An actual yield of the course of a chemical reaction is the mass of a product actually obtained from the reaction.

In practice you see it and It is usually less than the theoretical yield.

Various reasons may come up to explain this away but here is one:

• incomplete reactions, simply put here some of the reactants do not react to form the product.

The same applies in the question about the actual yield will reduce significantly in molar mass now that insufficient amount of reagent are used.

Answer:

2

Explanation:

pH+pOH=14

- Hope that helps! Please let me know if you need further explanation.

Answer:

2

Explanation:

Ph+PoH=14

Answer:

A chemical reaction is a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products. ... A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.

Explanation:

Hopefully this is what you needed

Answer:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Explanation:

Hello,

In this case, for the given compound, heptanone, whose chemical formula is:

[tex]CH_3COCH_2CH_2CH_2CH_2CH_3[/tex]

We can write the molecular formula showing the present atoms of each element:

[tex]C_7H_{14}O[/tex]

In such a way we have:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Best regards.

Answer:

Specific Immune Response

Explanation:

A specific immune response identifies the pathogen which then allows it to produce antibodies that protect against that SPECIFIC pathogen.

Answer:

Explanation:

Answer:

C)

Explanation:

JUST DID IT

Answer:

A D E

Explanation:

just did it

Explanation:

This picture shows how the moon from earth when it is in position

Answer:

0.2M

Explanation:

Step 1:

Data obtained from the question.

Volume of acid (Va) = 100mL

Molarity of the acid (Ma) = 0.026 M

Volume of base (Vb) = 13mL

Molarity of the base (Mb) =..?

Step 2:

The balanced equation for the reaction. This is given below:

HCl + KOH —> KCl + H2O

From the balanced equation above,

The mole ratio of the acid (nA) = 1

The mole ratio of the base (nB) = 1

Step 3:

Determination of the molarity of the base, KOH. This can be obtained as follow:

MaVa/MbVb = nA/nB

0.026 x100 / Mb x 13 = 1

Cross multiply to express in linear form

Mb x 13 = 0.026 x 100

Divide both side by 13

Mb = 0.026 x 100 / 13

Mb = 0.2M

Therefore, the molarity of the base, KOH is 0.2M

Answer:

0.2M

Explanation:

KOH(aq) + HCl(aq) ⇒  KCl(aq) + H2O(l)

We express the moles of analyte (HCl) and titrant based (KOH) on their molar concentration:

M1 * V1 = M2 * V2

The molarity of the solution is calculated with the following equation:

M2 = V1 x M1 / ​​V2

Where:

V2 = valued sample volume

V1 = volume of titrant consumed (measured with the burette)

M1 = concentration of titrant solution

M2 = concentration of sample

M2 = 100mL * 0.026M / 13mL = 0.2M