Answer:
To determine the velocity of the wood and the bullet as they leave the target area, we can use the principle of conservation of momentum. According to this principle, the total momentum before the collision is equal to the total momentum after the collision.
The velocity of the wood and the bullet as they leave the target area is approximately 28.78 m/s.
Explanation:
The initial momentum of the bullet can be calculated by multiplying its mass (0.05 kg) with its initial velocity (1180 m/s). This gives us an initial momentum of:
Initial momentum of bullet = 0.05 kg * 1180 m/s = 59 kg·m/s
The momentum of the wood block before the collision is zero since it is initially at rest.
After the collision, the bullet lodges into the wood block, and they move together as one system. Let's assume the final velocity of both the wood block and the bullet after the collision is V.
Using the conservation of momentum, we can write the equation:
Total initial momentum = Total final momentum
0 + 59 kg·m/s = (0.05 kg + 2 kg) * V
59 kg·m/s = 2.05 kg * V
V = 59 kg·m/s / 2.05 kg ≈ 28.78 m/s
Therefore, the velocity of the wood and the bullet as they leave the target area is approximately 28.78 m/s.
Learn more about conservation of momentum here:
https://brainly.com/question/29220242
#SPJ11
3. A grating with 1555 lines/cm is illuminated with light of wavelength 565 nm. What
is the highest-order number that can be observed with this grating? (Hint:
Remember that sin can never be greater than 1 for a diffraction grating. )
important!
The highest-order number that can be observed with this grating using diffraction formula is 1/1555.
It is determined using the formula for diffraction: mλ = d sinθ. Where m is the order number, λ is the wavelength of light, d is the grating spacing, and θ is the angle of diffraction. In this case, the grating has 1555 lines/cm, which means the grating spacing is 1/1555 cm.
To determine the highest-order number, calculate m × (565 × 10^-9 meters) = (1/1555 cm) × sinθ, where θ must be less than or equal to 90 degrees to satisfy sinθ ≤ 1. Given the wavelength of light as 565 nm (or 565 × 10^-9 meters), we can proceed with the calculation. Since sinθ ≤ 1, the highest-order number (m) can be determined by substituting θ = 90 degrees into the equation: m = (1/1555 cm) × sin(90 degrees).
To know more about grating, visit
https://brainly.com/question/30460514
#SPJ11
A projectile is launched horizontally from a height of 8. 0 m. The projectile travels 6. 5 m before hitting the ground. The velocity of the projectile the moment it was launched, rounded to the nearest hundredth, is m/s.
The initial velocity of a projectile launched horizontally can be calculated using the equation of distance covered horizontally (x) = Initial velocity (u) Time of flight (t). The horizontal component of the initial velocity can be determined by x = u t, t = 1.63 s, x = 6.5 mu = x / t = 6.5 m / 1.63 su = 3.99 m/s 4.00 m/s.
The initial velocity of the projectile that was launched horizontally can be calculated using the equation below: Distance covered horizontally (x) = Initial velocity (u) × Time of flight (t) where, Time of flight (t) can be found using the formula below: t = [2 × vertical height (h)] / g where ,g is the acceleration due to gravity = 9.8 m/s².The vertical height (h) of the projectile is 8.0 m. So the time of flight of the projectile will bet = [2 × 8.0 m] / 9.8 m/s²t = 1.63 s Therefore, the horizontal component of the projectile’s initial velocity can be determined by: x = u × tt = 1.63 s, x = 6.5 mu = x / t = 6.5 m / 1.63 su = 3.99 m/s ≈ 4.00 m/s. So, the projectile was launched horizontally with a velocity of 4.00 m/s (rounded to the nearest hundredth).Content loaded: The term “content loaded” is used to indicate that the contents of a webpage or app have finished loading and are ready for viewing or use.
To know more about velocity Visit:
https://brainly.com/question/30559316
#SPJ11
A 5-kg object is moving to the right at 4 m/s and collides with another object moving to the left at 5 m/s. The objects collide and stick together. After the collision, the combined object:
After the collision, the two objects stick together and move as one. Their total mass is m1 + m2 = 5 kg + m2.
How to determine the effect of the collisionIn this case, we can apply the principle of conservation of linear momentum
The initial momentum of the first object (P1_initial) is given by its mass (m1) times its velocity (v1), which is [tex]5 kg * 4 m/s = 20 kg*m/s.[/tex]
Therefore, the total initial momentum [tex](P_{total_initial}) is P1_{initial} + P2_{initial} = 20 kg*m/s - m2 * 5 m/s.[/tex]
After the collision, the two objects stick together and move as one.
Their total mass is m1 + m2 = 5 kg + m2.
Read more on collision here:
https://brainly.com/question/24915434
#SPJ4
Susie estimated that she can run for hours at a steady rate of 8mph. She enters a marathon, a distance of 26miles. How long should it take her to complete the race? Give answers in hours and minutes.
To determine the time it would take Susie to complete the marathon, we can use the formula: Time = Distance / Speed
Given that the distance of the marathon is 26 miles and Susie's steady rate is 8 mph, we can substitute these values into the formula. Time = 26 miles / 8 mph. To calculate the time, we divide 26 miles by 8 mph: Time = 3.25 hours. Since there are 60 minutes in an hour, we can convert the decimal part of the time to minutes: 0.25 hours * 60 minutes/hour = 15 minutes. Therefore, it would take Susie approximately 3 hours and 15 minutes to complete the marathon.
To learn more about Speed, https://brainly.com/question/28224010
#SPJ11
In the experiment, we measure the total time for 20 complete revolutions and divide it by 20 to obtain the period of the rotation. why not measure the amount of time for one complete revolution directly and record it as the period of rotation?
In the experiment, measuring the total time for 20 complete revolutions and dividing it by 20 to obtain the period of rotation is done to reduce errors and improve the accuracy of the measurement.
Measuring the time for one complete revolution directly can be subject to human reaction time and potential errors in starting and stopping the stopwatch precisely at the beginning and end of each revolution. These errors can accumulate and affect the accuracy of the measurement.
By measuring the total time for 20 complete revolutions and then dividing it by 20, we are essentially averaging out these potential errors over multiple revolutions. This helps to minimize the impact of any individual timing error and provides a more reliable and accurate measurement of the period of rotation.
Additionally, by taking multiple measurements (in this case, 20), we increase the sample size and reduce the influence of outliers or irregularities in any individual measurement. This improves the overall precision and reliability of the calculated period.
Therefore, measuring the total time for multiple revolutions and dividing by the number of revolutions allows for a more accurate determination of the period of rotation in the experiment.
To know more about period here
https://brainly.com/question/30892752
#SPJ4
Steam burns are pretty dangerous because there's often a lot of
thermal energy in the steam. When the steam hits you, it is going to
transfer some of that energy to you, cooling the steam. If a 6.4 kg cloud of
steam at 150 degrees, hits you and cools to 100 degrees, What is the loss
of heat energy? (no scientific notation)
The loss of heat energy when a 6.4 kg cloud of steam at 150 degrees Celsius hits you and cools to 100 degrees Celsius is 13,440,000 Joules.
To calculate the heat energy loss, we can use the formula:
Q = mcΔT
Where Q represents heat energy, m is the mass of the steam cloud (6.4 kg), c is the specific heat capacity of water (4,186 J/kg°C), and ΔT is the change in temperature (150°C - 100°C = 50°C).
Plugging in the values, we have:
Q = (6.4 kg) × (4,186 J/kg°C) × (50°C)
Q = 13,440,000 Joules
Therefore, the loss of heat energy when the steam cools from 150°C to 100°C is 13,440,000 Joules.
Learn more about heat energy calculations here:
https://brainly.com/question/30320641
#SPJ11
A stevedore slides a crate along a dock with a 50 kg horizontal force of 175 N. The opposing force of friction is 120 N. If started from rest, what is the crates’s final velocity after 0.5s?
To determine the crate's final velocity after 0.5 seconds, we can use the concept of Newton's second law of motion, which states that the net force acting on an object is equal to its mass multiplied by its acceleration.
In this scenario, the stevedore applies a horizontal force of 175 N to move the crate along the dock. However, there is also an opposing force of friction acting in the opposite direction, which has a magnitude of 120 N. The net force is the difference between these two forces, so we can calculate it as follows:
Net force = Applied force - Frictional force
Net force = 175 N - 120 N
Net force = 55 N
Now, using Newton's second law of motion, we can determine the acceleration of the crate. Rearranging the equation, we have:
Net force = mass * acceleration
55 N = 50 kg * acceleration
Solving for acceleration:
acceleration = 55 N / 50 kg
acceleration = 1.1 m/s²
Since we know the initial velocity of the crate is zero (as it starts from rest), and we want to find the final velocity after 0.5 seconds, we can use the equation of motion:
final velocity = initial velocity + (acceleration * time)
Plugging in the values:
final velocity = 0 + (1.1 m/s² * 0.5 s)
final velocity = 0.55 m/s
Therefore, the crate's final velocity after 0.5 seconds is 0.55 m/s. This means that after being subjected to a 175 N force and experiencing 120 N of friction, the crate gains a velocity of 0.55 m/s in the direction of the applied force.
To know more about Velocity visit-
brainly.com/question/30559316
#SPJ11
A web browser is open on yur screen. The lengh of the monitor is x+7. The area of the browser windw is 24 inches. The dimensions of the browser window are x-2 and x. Find the length of the browser window x. Part B. The browser covers 3/13 of the screen. What are the dimensions of the screen
The length of the browser window (x) is 6. The dimensions of the screen are approximately 3 inches (width) and 18/13 inches (height).
Let's solve the equations step by step:
Part A:
The area of the browser window is given by the equation:
(x - 2) * x = 24
Expanding the equation:
[tex]x^{2}[/tex] - 2x = 24
Rearranging the equation to standard quadratic form:
[tex]x^{2}[/tex] - 2x - 24 = 0
Factoring the quadratic equation:
(x - 6)(x + 4) = 0
Setting each factor to zero:
x - 6 = 0 or x + 4 = 0
Solving for x:
x = 6 or x = -4
Since the length of the monitor cannot be negative, we discard the solution x = -4.
Therefore, the length of the browser window (x) is 6.
Part B:
The dimensions of the screen can be calculated using the length of the monitor (x+7) and the coverage ratio of the browser window (3/13).
The width of the screen is given by:
Width = (3/13) * (x + 7)
The height of the screen is given by:
Height = (3/13) * (x)
Substituting the value of x = 6:
Width = (3/13) * (6 + 7) = (3/13) * 13 = 3
Height = (3/13) * 6 = 18/13
Therefore, the dimensions of the screen are approximately 3 inches (width) and 18/13 inches (height).
To know more about dimensions here
https://brainly.com/question/23246002
#SPJ4
Assuming a constant density, the size of an object scales as its mass raised to what power?.
Assuming a constant density, the size of an object scales as its mass raised to the power of 1/3 (one-third).
The mass, density, and volume of an object are related by the equation:
ρ = m/Vwhere ρ is the density, m is the mass, and V is the volume.
We can write this equation as
V = m/ρThis equation can be used to find the relationship between the mass and volume of an object of constant density.
Assume that we have two objects of the same material with masses m1 and m2.
We can find the ratio of their volumes by taking the ratio of their masses and density as follows:
V1/V2 = m1/ρ / m2/ρV1/V2 = m1/m2V1/V2 = (m1/m2)^(1/3)
This shows that the ratio of the volumes of two objects with the same density is proportional to the cube root of the ratio of their masses.
This relationship can be expressed as:
V ∝ m^(1/3)
This relationship can also be expressed as the size of an object scales as its mass raised to the power of 1/3.
Know more about constant density here:
https://brainly.com/question/6838128
#SPJ11
A call can supply circuit of 0. 4A and 0. 2A through a 4ohms and 10 ohms resistor respectively what is the internal resistant of the cell
A call can supply circuit of 0. 4A and 0. 2A through a 4ohms and 10 ohms resistor respectively what is the internal resistant of the cellThe internal resistance of the cell is 3 ohms.
According to Ohm's Law, the current in a circuit can be determined using the equation I = V/R, where I is the current, V is the voltage, and R is the resistance. In this case, we have two resistors connected in parallel. Let's assume the voltage of the cell is V.
For the 4-ohm resistor, the current is given as 0.4A. Using Ohm's Law, we can calculate the voltage across the resistor as V1 = I1 * R1 = 0.4A * 4ohms = 1.6V.
For the 10-ohm resistor, the current is given as 0.2A. Using Ohm's Law, we can calculate the voltage across the resistor as V2 = I2 * R2 = 0.2A * 10ohms = 2V.
Since the resistors are in parallel, the voltage across both resistors is the same, so V1 = V2. This means the internal resistance of the cell can be calculated as V = I * r, where r is the internal resistance. Substituting the values, we have 1.6V = 0.4A * r, which gives us r = 1.6V / 0.4A = 4 ohms.
learn more about supply circuit here:
https://brainly.com/question/32392237
#SPJ11
A bookshelf is at rest in a room. A force of 35. 0 newtons is applied to a bookshelf. If the floor imparts a frictional force of 2. 90 newtons, what is the net force acting on the bookshelf?.
The net force acting on the bookshelf is 32.1 N. It is given that the net force acting on a bookshelf that is at rest in a room when a force of 35.0 N is applied to it and the floor imparts a frictional force of 2.90 N.
The force that is applied to an object minus the frictional force acting on it is called net force. This net force is responsible for causing motion in the object. Therefore, if the object is at rest, the net force is zero. If it is in motion, the net force is nonzero.
The formula for calculating net force is: Net force = Applied force - Frictional force
Given: Applied force = 35.0 N, Frictional force = 2.90 N
We know that, Net force = Applied force - Frictional force
= 35.0 N - 2.90 N
= 32.1 N
Therefore, the net force acting on the bookshelf is 32.1 N.
To know more about net force, refer
https://brainly.com/question/14361879
#SPJ11
Veronica’s velocity was measured as 4. 3 m/s. She displaced 20 meters in 4. 7 seconds. Which piece of information is missing for the correct calculation of velocity?
The missing piece of information required for the correct calculation of velocity is the direction of the displacement.
In order to calculate velocity accurately, we need to have both the displacement and the time. In this scenario, the displacement of 20 meters in 4.7 seconds is provided, but the missing piece of information is the direction of the displacement. Velocity is a vector quantity, which means it includes both magnitude (speed) and direction. To calculate the velocity accurately, we need to know whether Veronica's displacement was in a specific direction (e.g., north, east, etc.) or if it was only given as a magnitude (20 meters) without a direction.
Learn more about velocity here:
https://brainly.com/question/847745
#SPJ11
A 20. Kilogram rock is lifted 7. 0 meters above the ground. What is the gravitational
potential energy of the rock?
The gravitational potential energy of the rock is 1,372 Joules.
The gravitational potential energy (PE) of an object can be calculated using the formula:
PE = m * g * h, where:
m is the mass of the object,
g is the acceleration due to gravity, and
h is the height or distance above the reference point.
In this case, the mass of the rock (m) is 20 kilograms, and the height (h) is 7.0 meters.
The acceleration due to gravity (g) is approximately 9.8 m/s².
Now we can calculate the gravitational potential energy:
PE = 20 kg * 9.8 m/s² * 7.0 m
PE = 1,372 Joules
Therefore, the gravitational potential energy of the rock is 1,372 Joules.
Learn more about gravitational PE visit:
brainly.com/question/3910603
#SPJ11
A particle with a charge of 5nC has a distance of 0. 5m away from a charge of 9. 5nC. What is its electric potential energy?
The electric potential energy of the particle with a charge of 5nC, located 0.5m away from a charge of 9.5nC, is 1.9 J.
To calculate the electric potential energy, we can use the formula:
Electric potential energy = (k * q1 * q2) / r
Where:
k is the electrostatic constant (9 x 10^9 N m^2/C^2),
q1 and q2 are the charges of the two particles (in this case, 5nC and 9.5nC, respectively),
r is the distance between the charges (0.5m).
Substituting the given values into the formula:
Electric potential energy = (9 x 10^9 N m^2/C^2) * (5 x 10^-9 C) * (9.5 x 10^-9 C) / 0.5m
Calculating the expression:
Electric potential energy ≈ 1.9 J
Therefore, the electric potential energy of the particle is approximately 1.9 Joules.
learn more about electric potential here:
https://brainly.com/question/28444459
#SPJ11
The electron and proton of a hydrogen atom are separated by a distance of approximately 5.3 x 10^-11m. Find the magnitude of the electric and gravitational force between the two particles.
The magnitude of the electric force is 8.21 × 10⁻⁸ N and the gravitational force is 3.61 × 10⁻⁸ N. The electric force acting between the electron and proton of hydrogen atom is given by: Coulomb's Law of electrostatics, F = 1 / 4πε₀ × q₁q₂ / r².
Given that, Distance between the electron and proton of a hydrogen atom, r = 5.3 × 10⁻¹¹m, Mass of an electron, m₁ = 9.1 × 10⁻³¹ kg, Mass of a proton, m₂ = 1.67 × 10⁻²⁷ kg, Charge of an electron, q₁ = -1.6 × 10⁻¹⁹ C, Charge of a proton, q₂ = +1.6 × 10⁻¹⁹ C.
Where,ε₀ = permittivity of free space = 8.854 × 10⁻¹² C²/N m²
F = 1 / 4π (8.854 × 10⁻¹²) × (1.6 × 10⁻¹⁹)² / (5.3 × 10⁻¹¹)²
F = 8.21 × 10⁻⁸ N
The gravitational force acting between the electron and proton of hydrogen atom is given by:
Newton's Law of gravitation, F = G × m₁m₂ / r², Where, G = gravitational constant = 6.67 × 10⁻¹¹ N m²/kg²
F = (6.67 × 10⁻¹¹) × (9.1 × 10⁻³¹) × (1.67 × 10⁻²⁷) / (5.3 × 10⁻¹¹)²
F = 3.61 × 10⁻⁸ N
Therefore, the magnitude of the electric force is 8.21 × 10⁻⁸ N and the gravitational force is 3.61 × 10⁻⁸ N.
To know more about electric force, refer
https://brainly.com/question/30236242
#SPJ11
An elastic wire expands by 2cm when load of 40g hangs from it. What additional load will be required to cause a further extension of 4cm
