A regression was run to determine if there is a relationship between hours of TV watched per day (x) and the number of sit-ups a person can do (y). The results were: y = a+bx b = -0.89 a = 23.65 r2 = 0.7038 If a person watches 14 hours of television a day, predict how many sit-ups he can do. What is the value of the correlation coefficient? Round to three decimal places.

Answer:

5.215 units (rounded up to three decimal places)

Step-by-step explanation:

To find the distance between points (3.1 , 0.3) and (2.7, -4.9)

We use the Pythagoras Theorem which states that for a right triangle of sides a,b and c then;

a² + b²  = c² ,  Where c is the hypotenuse.

In our case, the distance between the two points is the hypotenuse of triangle formed by change in y-axis and change in x-axis.

The distance (hypotenuse) squared = (-4.9 - 0.3)² + (2.7 - 3.1)² = 27.04 + 0.16 = 27.2

Hypotenuse (the distance between) = [tex]\sqrt{27.2}[/tex] = 5.215 units (rounded up to three decimal places)

Answer:

hkkr

need school the long said

Answer:

That would indicate 20.0 ml

id appreciate a rating thanks XP

Answer:

2.7 in²

Step-by-step explanation:

Since ∆BAC and ∆EDF are similar, therefore, the ratio of their area = square of the ratio of their corresponding side lengths.

Thus, if area of ∆EDF = x, area of ∆BAC = 6 in², EF = 2 in, BC = 3 in, therefore:

[tex] \frac{6}{x} = (\frac{3}{2})^2 [/tex]

[tex] \frac{6}{x} = (1.5)^2 [/tex]

[tex] \frac{6}{x} = 2.25 [/tex]

[tex] \frac{6}{x}*x = 2.25*x [/tex]

[tex] 6 = 2.25x [/tex]

[tex] \frac{6}{2.25} = \frac{2.25x}{2.25} [/tex]

[tex] 2.67 = x [/tex]

[tex] x = 2.7 in^2 [/tex] (nearest tenth)

Answer: a. 0.4 × 0.15 = 0.060

Step-by-step explanation: Probability of the complement of an event is the one that is not part of the event.

For P(A):

P(A') = 1 - 0.6

P(A') = 0.4

For P(B):

P(B') = 1 - 0.85

P(B') = 0.15

To determine probability of A' and B':

P(A' and B') = P(A')*P(B')

P(A' and B') = 0.4*0.15

P(A' and B') = 0.06

Probability of the complement of the event is 0.060

Step-by-step explanation:

Hello, there!!

The answer would be 41/9.

The reason for above answer is to change any mixed fraction into improper fraction we should follow a simple step:

look here,

=[tex] \frac{4 \times 9 + 5}{9} [/tex]

we get 41/9.

Hope it helps...

The given fraction into the improper fraction should be [tex]\frac{41}{9}[/tex]

Given that,

[tex]= 4\frac{5}{9}\\\\ = \frac{41}{9}[/tex]

Here we multiply the 9 with the 4 it gives 36 and then add 5 so that 41 arrives.

learn more about the fraction here: https://brainly.com/question/1301963?referrer=searchResults

Answer:

B. FALSE

Step-by-step explanation:

Surface area of cone = πr(r + l)

Where,

r = r

l = 3r

S.A of cone = πr(r + 3r)

= πr² + 3πr²

S.A of cone = 4πr²

Surface area of cylinder = 2πrh + 2πr² = 2πr(h + r)

Where,

r = r

h = 2r

S.A of cylinder = 2πr(2r + r)

= 4πr² + 2πr²

S.A of cylinder = 6πr²

The surface are of the cone and that of the cylinder are not the same. The answer is false.

Answer:false

Step-by-step explanation:

False

Answer:

[tex]Slanted\ Roof = 20.77\ ft[/tex]

Step-by-step explanation:

The question has missing attachment (See attachment 1 for complete figure)

Given

Width, W = 20ft

Let the taller height be represented with H and the shorter height with h

H = 10ft

h = 8ft

Overhang = 8 inch

Required

Determine the length of the slanted roof

FIrst, we have to determine the distance between the tip of the roof and the shorter height;

Represent this with

This is calculated by

[tex]D = H - h[/tex]

Substitute 10 for H and 8 for h

[tex]D = 10 - 8[/tex]

[tex]D = 2ft[/tex]

Next, is to calculate the length of the slant height before the overhang;

See Attachment 2

Distance L can be calculated using Pythagoras theorem

[tex]L^2 = 2^2 + 20^2[/tex]

[tex]L^2 = 4 + 400[/tex]

[tex]L^2 = 404[/tex]

Take Square root of both sides

[tex]\sqrt{L^2} = \sqrt{404}[/tex]

[tex]L = \sqrt{404}[/tex]

[tex]L = 20.0997512422[/tex]

[tex]L = 20.10\ ft[/tex] -------Approximated

The full length of the slanted roof is the sum of L (calculated above) and the overhang

[tex]Slanted\ Roof = L + 8\ inch[/tex]

Substitute 20.10 ft for L

[tex]Slanted\ Roof = 20.10\ ft + 8\ inch[/tex]

Convert inch to feet to get the slanted roof in feet

[tex]Slanted\ Roof = 20.1\ ft + 8/12\ ft[/tex]

[tex]Slanted\ Roof = 20.10\ ft + 0.67\ ft[/tex]

[tex]Slanted\ Roof = 20.77\ ft[/tex]

Hence, the total length of the slanted roof in feet is approximately 20.77 feet

Answer:

Find answer below

Step-by-step explanation:

f(x)=2x-6

Domain of 2x-6: {solution:-∞<x<∞, interval notation: -∞, ∞}

Range of 2x-6: {solution:-∞<f(x)<∞, interval notation: -∞, ∞}

Parity of 2x-6: Neither even nor odd

Axis interception points of 2x-6: x intercepts : (3, 0) y intercepts (0, -6)

inverse of 2x-6: x/2+6/2

slope of 2x-6: m=2

Plotting : y=2x-6

Answer:

-3

Step-by-step explanation:

[tex]8+3y = -1\\3y = -9\\y = -3[/tex]

Answer:

y = -3

Step-by-step explanation:

-1=3y+8

3y+8=-1

3y=-9

y=-3

Answer:

A. -11

Step-by-step explanation:

In the function, replace x with -2

R(x) = x^2 - 3x - 1 ➡ R(-2) = (-2)^2 - 3 × 2 -1 = -11

Answer:

[tex]x = 7[/tex]

Step-by-step explanation:

We can solve the equation [tex]5x+3+8x-4=90[/tex] by isolating the variable x on one side. To do this, we must simplify the equation.

[tex]5x+3+8x-4=90[/tex]

Combine like terms:

[tex]13x - 1 = 90[/tex]

Add 1 to both sides:

[tex]13x = 91[/tex]

Divide both sides by 13:

[tex]x = 7[/tex]

Hope this helped!

Answer:

x = 7

Step-by-step exxplanation:

5x + 3 + 8x - 4 = 90

5x + 8x = 90 - 3 + 4

13x = 91

x = 91/13

x = 7

probe:

5*7 + 3 + 8*7 - 4 = 90

35 + 3 + 56 - 4 = 90

Answer:

B. 152 cm²

Step-by-step explanation:

To find the surface area using a net, do this:

Take apart the figure. We see that there are three rectangles and two triangles. Find the area of each ([tex]A=l*w[/tex]) and then add the values together:

The first rectangle on the left is the same as the one on the right.

[tex]5*8=40[/tex]

Two measures are 40 cm².

The middle rectangle is:

[tex]6*8=48[/tex]

48 cm²

The formula for the area of a triangle is [tex]A=\frac{1}{2}*b*h[/tex]:

[tex]A=\frac{1}{2}*6*4\\\\A=\frac{1*6*4}{2}\\\\A=\frac{24}{2}\\\\ A=12[/tex]

The area of the two triangles is 12 cm².

Now add the values:

[tex]40+40+48+12+12=152[/tex]

The area of the figure is 152 cm².

:Done

Answer:

a) dV(s)  =  15,386 cm³

b) dS(s) = 4,396 cm²

c) dV(s)/V(s) = 1,07 %    and   dS(s)/ S(s)  =  0,71 %

Step-by-step explanation:

a) The volume of the sphere is

V(s) = (4/3)*π*x³        where x is the radius

Taking derivatives on both sides of the equation we get:

dV(s)/ dr  =  4*π*x²    or

dV(s)  =  4*π*x² *dr

the possible propagated error in cm³ in computing the volume of the sphere is:

dV(s)  = 4*3,14*(7)²*(0,025)

dV(s)  =  15,386 cm³

b) Surface area of the sphere is:

V(s) = (4/3)*π*x³  

dV(s) /dx  =  S(s) = 4*π*x³

And

dS(s) /dx  = 8*π*x

dS(s) = 8*π*x*dx

dS(s) = 8*3,14*7*(0,025)

dS(s) = 4,396 cm²

c) The approximates errors in a and b are:

V(s) =  (4/3)*π*x³     then

V(s) = (4/3)*3,14*(7)³

V(s) = 1436,03 cm³

And  the possible propagated error in volume is from a)  is

dV(s)  =  15,386 cm³

dV(s)/V(s)  = [15,386 cm³/1436,03 cm³]* 100

dV(s)/V(s) = 1,07 %

And for case b)

dS(s) = 4,396 cm²

And the surface area of the sphere is:

S(s) =  4*π*x³        ⇒   S(s) =  4*3,14*(7)²    ⇒ S(s) = 615,44 cm²

dS(s) = 4,396 cm²

dS(s)/ S(s)  =  [ 4,396 cm²/615,44 cm² ] * 100

dS(s)/ S(s)  =  0,71

Answer:

Ok, as i understand it:

for a point P = (x, y)

The values of x and y can be randomly chosen from the set {1, 2, ..., 10}

We want to find the probability that the point P lies on the second quadrant:

First, what type of points are located in the second quadrant?

We should have a value negative for x, and positive for y.

But in our set;  {1, 2, ..., 10}, we have only positive values.

So x can not be negative, this means that the point can never be on the second quadrant.

So the probability is 0.

Answer:

Step-by-step explanation:

perimeter of triangle=sum of lengths of sides=5x-7+3x-4+2x-6=10x-17

Answer:

10x - 17

Step-by-step explanation:

To find the perimeter of a triangle, add up all three sides

( 5x-7) + ( 3x-4) + ( 2x-6)

Combine like terms

10x - 17

Answer:

Step-by-step explanation:

60°=2×30°

one angle is double the angle of the same right angled triangle.

so hypotenuse is double the smallest side.

Hypotenuse=10

smallest side=10/2=5

third side =√(10²-5²)=5√(2²-1)=5√3

[tex]\dfrac{x}{5}=-2\\\\x=-10[/tex]

Answer:

[tex]\huge \boxed{{x=-10}}[/tex]

Step-by-step explanation:

[tex]\displaystyle \frac{x}{5} =-2[/tex]

We need the x variable to be isolated on one side of the equation, so we can find the value of x.

Multiply both sides of the equation by 5.

[tex]\displaystyle \frac{x}{5}(5) =-2(5)[/tex]

Simplify the equation.

[tex]x=-10[/tex]

The value of x that makes the equation true is -10.

Answer:

the length has dimension 1, the area has the dimension 2, the volume has dimension 3, etc. And the angle has dimension 0.

Step-by-step explanation:

Answer:

[tex]Mean = 53.25[/tex]

Step-by-step explanation:

Given

Low Temperature : 40−44 || 45−49 ||  50−54 || 55−59 || 60−64

Frequency: --------------- 3 -----------6----------- 1-----------3--- -----7

Required

Determine the mean

The first step is to determine the midpoints of the given temperatures

40 - 44:

[tex]Midpoint = \frac{40+44}{2}[/tex]

[tex]Midpoint = \frac{84}{2}[/tex]

[tex]Midpoint = 42[/tex]

45 - 49

[tex]Midpoint = \frac{45+49}{2}[/tex]

[tex]Midpoint = \frac{94}{2}[/tex]

[tex]Midpoint = 47[/tex]

50 - 54:

[tex]Midpoint = \frac{50+54}{2}[/tex]

[tex]Midpoint = \frac{104}{2}[/tex]

[tex]Midpoint = 52[/tex]

55- 59

[tex]Midpoint = \frac{55+59}{2}[/tex]

[tex]Midpoint = \frac{114}{2}[/tex]

[tex]Midpoint = 57[/tex]

60 - 64:

[tex]Midpoint = \frac{60+64}{2}[/tex]

[tex]Midpoint = \frac{124}{2}[/tex]

[tex]Midpoint = 62[/tex]

So, the new frequency table is as thus:

Low Temperature : 42 || 47 ||  52 || 57 || 62

Frequency: ----------- 3 --||- -6-||- 1-||- --3- ||--7

Next, is to calculate mean by

[tex]Mean = \frac{\sum fx}{\sum x}[/tex]

[tex]Mean = \frac{42 * 3 + 47 * 6 + 52 * 1 + 57 * 3 + 62 * 7}{3+6+1+3+7}[/tex]

[tex]Mean = \frac{1065}{20}[/tex]

[tex]Mean = 53.25[/tex]

The computed mean is greater than the actual mean

Answer:

[tex]\approx \bold{6544\ in^3/sec}[/tex]

Step-by-step explanation:

Given:

Rate of change of radius of cylinder:

[tex]\dfrac{dr}{dt} = +7\ in/sec[/tex]

(This is increasing rate so positive)

Rate of change of height of cylinder:

[tex]\dfrac{dh}{dt} = -6\ in/sec[/tex]

(This is decreasing rate so negative)

To find:

Rate of change of volume when r = 20 inches and h = 16 inches.

Solution:

First of all, let us have a look at the formula for Volume:

[tex]V = \pi r^2h[/tex]

Differentiating it w.r.to 't':

[tex]\dfrac{dV}{dt} = \dfrac{d}{dt}(\pi r^2h)[/tex]

Let us have a look at the formula:

[tex]1.\ \dfrac{d}{dx} (C.f(x)) = C\dfrac{d(f(x))}{dx} \ \ \ (\text{C is a constant})\\2.\ \dfrac{d}{dx} (f(x).g(x)) = f(x)\dfrac{d}{dx} (g(x))+g(x)\dfrac{d}{dx} (f(x))[/tex]

[tex]3.\ \dfrac{dx^n}{dx} = nx^{n-1}[/tex]

Applying the two formula for the above differentiation:

[tex]\Rightarrow \dfrac{dV}{dt} = \pi\dfrac{d}{dt}( r^2h)\\\Rightarrow \dfrac{dV}{dt} = \pi h\dfrac{d }{dt}( r^2)+\pi r^2\dfrac{dh }{dt}\\\Rightarrow \dfrac{dV}{dt} = \pi h\times 2r \dfrac{dr }{dt}+\pi r^2\dfrac{dh }{dt}[/tex]

Now, putting the values:

[tex]\Rightarrow \dfrac{dV}{dt} = \pi \times 16\times 2\times 20 \times 7+\pi\times 20^2\times (-6)\\\Rightarrow \dfrac{dV}{dt} = 22 \times 16\times 2\times 20 +3.14\times 400\times (-6)\\\Rightarrow \dfrac{dV}{dt} = 14080 -7536\\\Rightarrow \dfrac{dV}{dt} \approx \bold{6544\ in^3/sec}[/tex]

So, the answer is: [tex]\approx \bold{6544\ in^3/sec}[/tex]

Answer:

12/27

Step-by-step explanation:

Count all letters and all vowels then divide vowels by letters

The probability that a vowel is randomly selected in the experiment of selecting a letter from the phrase "Sean wants to eat at Olive Garden", is 4/9.

The probability of any event suppose A, in an experiment is given as:

P(A) = n/S,

where P(A) is the probability of event A, n is the number of favorable outcomes to event A in the experiment, and S is the total number of outcomes in the experiment.

In the question, we are given an experiment of selecting a letter from the phrase "Sean wants to eat at Olive Garden".

We are asked to find the probability that the selected letter is a vowel.

Let the event of selecting a vowel from the experiment of selecting a letter from the phrase "Sean wants to eat at Olive Garden" be A.

We can calculate the probability of event A by the formula:

P(A) = n/S,

where P(A) is the probability of event A, n is the number of favorable outcomes to event A in the experiment, and S is the total number of outcomes in the experiment.

The number of outcomes favorable to event A (n) = 12 (Number of vowels in the phrase)

The total number of outcomes in the experiment (S) = 27 (Number of letters in the phrase).

Now, we can find the probability of event A as:

P(A) = 12/27 = 4/9

∴ The probability that a vowel is randomly selected in the experiment of selecting a letter from the phrase "Sean wants to eat at Olive Garden", is 4/9.

Learn more about the probability of an event at

https://brainly.com/question/7965468

#SPJ2

Answer and Step-by-step explanation:

The computation of points on the ellipse is shown below:-

Distance between any point on the ellipse

[tex](3 cos t, sin t) and (\frac{4}{3},0) is\\\\ d = \sqrt{(3 cos\ t - \frac{4}{3}^2) } + (sin\ t - 0)^2\\\\ d^2 = (3 cos\ t - \frac{4}{3})^2 + sin^2 t[/tex]

To minimize

[tex]d^2, set\ f' (t) = 0\\\\2(3cos\ t - \frac{x=4}{3} ).3(-sin\ t) + 2sin\ t\ cos\ t = 0\\\\ 8 sin\ t - 16 sin\ t\ cos\ t = 0\\\\ 8 sin\ t (1 - 2 cos\ t) = 0\\\\ sin\ t = 0, cos\ t = \frac{1}{2} \\\\ t= 0, \ 0, \pi,2\pi,\frac{\pi}{3} , \frac{5\pi}{3}[/tex]

Now we create a table by applying the critical points which are shown below:

t            [tex]d^{2} = (3\ cos t - \frac{4}{3})^{2} + sin^{2}t[/tex]

0           [tex]\frac{25}{9}[/tex]

[tex]\pi[/tex]           [tex]\frac{169}{9}[/tex]

[tex]2\pi[/tex]         [tex]\frac{25}{9}[/tex]

[tex]\frac{\pi}{3}[/tex]          [tex]\frac{7}{9}[/tex]

[tex]\frac{5\pi}{3}[/tex]         [tex]\frac{7}{9}[/tex]

When t = [tex]\frac{\pi}{3}[/tex], x is [tex]\frac{3}{2}[/tex] and y is [tex]\frac{\sqrt{3} }{2}[/tex]. So, the required points are [tex](\frac{3}{2},\frac{\sqrt{3} }{2})[/tex]

When t = [tex]\frac{5\pi}{3}[/tex], x is [tex]\frac{3}{2}[/tex] and y is [tex]\frac{-\sqrt{3} }{2}[/tex]. So, the required points are [tex](\frac{3}{2},\frac{-\sqrt{3} }{2})[/tex]

Complete Question

A population has a mean mu μ equals = 77 and a standard deviation σ = 14. Find the mean and standard deviation of a sampling distribution of sample means with sample size n equals = 26

Answer:

The mean of sampling distribution of the sample mean ( [tex]\= x[/tex]) is [tex]\mu_{\= x } = 77[/tex]

The standard deviation of sampling distribution of the sample mean ( [tex]\= x[/tex]) is  

    [tex]\sigma _{\= x} = 2.746[/tex]

Step-by-step explanation:

From the question we are told that

    The population mean is  [tex]\mu = 77[/tex]

     The  standard deviation is  [tex]\sigma = 14[/tex]

     The sample size is  [tex]n = 26[/tex]

Generally the standard deviation of sampling distribution of the sample mean ( [tex]\= x[/tex]) is  mathematically represented as

           [tex]\sigma _{\= x} = \frac{ \sigma }{ \sqrt{n} }[/tex]

substituting values  

          [tex]\sigma _{\= x} = \frac{ 14}{ \sqrt{26} }[/tex]

          [tex]\sigma _{\= x} = 2.746[/tex]

Generally the mean of sampling distribution of the sample mean ( [tex]\= x[/tex]) is  equivalent to the population mean i.e  

      [tex]\mu_{\= x } = \mu[/tex]

      [tex]\mu_{\= x } = 77[/tex]

Answer:

35%

Step-by-step explanation:

[tex]Principal = 2500\\\\Simple\:Interest = 3500\\\\Time = 4 \:years\\\\Rate = ?\\\\Rate = \frac{100 \times Simple \: Interest }{Principal \times Time}\\\\Rate = \frac{100 \times 3500}{2500 \times 4} \\\\Rate = \frac{350000}{10000}\\\\ Rate = 35 \%[/tex]

[tex]S.I = \frac{PRT}{100}\\\\ 100S.I = PRT\\\\\frac{100S.I}{PT} = \frac{PRT}{PT} \\\\\frac{100S.I}{PT} = R[/tex]

Answer:

35%

Step-by-step explanation:

I REALLY HOPE I HELPED

HOPE I HELPED

PLS MARK BRAINLIEST

DESPERATELY TRYING TO LEVEL UP

 ✌ -ZYLYNN JADE ARDENNE

JUST A RANDOM GIRL WANTING TO HELP PEOPLE!

                                PEACE!

Answer:

Total hours that Jenny ran = 3.63 hours.

Step-by-step explanation:

Jenny ran on Tuesday for = 2/5 hours or 0.4 hours.

Time consumed to run on Thursday = 11/6 hours or 1.83 hours.

Time consumed to run on Saturday = 21/ 15 hours or 1.4 hours.

Here, the total hours can be calculated by just adding all the running hours. So the running hours of Tuesday, Thursday, and Saturday will be added to find the total hours.

Total hours that Jenny ran = 0.4 + 1.83 + 1.4 = 3.63 hours.

Hi there! :)

Answer:

[tex]\huge\boxed{2(14x - 41y)}[/tex]

(75x - 67y) - (47x + 15y)

Distribute the '-' sign with the terms inside of the parenthesis:

75x - 67y - (47x - (15y))

75x - 67y - 47x - 15y

Combine like terms:

28x - 82y

Distribute out the greatest common factor:

2(14x - 41y)

Answer:

b

Step-by-step explanation:

Answer:

Step-by-step explanation:

-6x²+26x+20

=-2(3x²-13x-10)

=-2(3x²-15x+2x-10)

=-2[3x(x-5)+2(x-5)]

=-2(x-5)(3x+2)

Answer: 3.2 feet.

Step-by-step explanation:

Given: The end of a hose was resting on the ground, pointing up an angle. Sal measured the path of the water coming out of the hose and found that it could be modeled using the equation[tex]f(x) = -0.3x^2 + 2x[/tex], where [tex]f(x)[/tex] is the height of the path of the water above the ground, in feet, and [tex]x[/tex] is the horizontal distance of the path of the water from the end of the hose, in feet.

At x= 4 , we get

[tex]f(x) = -0.3(4)^2 + 2(4)=-0.3(16)+8 =-4.8+8=3.2[/tex]

Hence, when the water was 4 feet from the end of the hose,  its height above the ground is 3.2 feet.

Answer:

3.2 feet.

Step-by-step explanation:

Answer:

[tex]Probability = \frac{3}{7}[/tex]

Step-by-step explanation:

Given

Electrician = 6

Mechanic = 8

Required

Determine the probability of selecting an electrician

First, we need the total number of employees;

[tex]Total = n(Electrician) + n(Mechanic)[/tex]

[tex]Total = 6 + 8[/tex]

[tex]Total = 14[/tex]

Next, is to determine the required probability using the following formula;

[tex]Probability = \frac{n(Electrician)}{Total}[/tex]

[tex]Probability = \frac{6}{14}[/tex]

Divide numerator and denominator by 2

[tex]Probability = \frac{3}{7}[/tex]

Hence, the probability of selecting an electrician is 3/7