A rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. If the mass of the plastic rectangle is 64.6 g, what is its density in g/mL?

Answers

Answer 1

Answer:

0.92g/mL

Explanation:

Density of a substance is calculated as follows:

Density = mass (m) ÷ volume (V)

According to this question, a rectangular piece of plastic has a width of 4.2 cm, a height of 1.9 cm and a length of 8.8 cm. Using the formula; L × W × H, the volume of the plastic can be calculated

V = L × W × H

V = 8.8 × 4.2 × 1.9

V = 70.2cm³

The mass of the plastic is 64.6g, hence, its density is:

Density = 64.6g ÷ 70.2cm³

Density of the rectangular plastic = 0.92g/cm³ or 0.92g/mL


Related Questions

In aqueous solution the Ni2" ion forms a complex with four ammonia molecules. Write the formation constant expression for the equilibrium between the hydrated metal ion and the aqueous complex. Under that, write the balanced chemical equation for the first step in the formation of the complex K,=________.

Answers

Answer:

The correct equation is "[tex]\frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]".

Explanation:

According to the question,

Throughout an aqueous solution, [tex]Ni^{2+}[/tex] exist as [tex][Ni(H_2O)_4]^{2+}[/tex]

So,

⇒ [tex][Ni(H_2O)_4]^{2+} + 4NH_3 \rightleftharpoons [Ni(NH_3)_4]^{2+} + H_2O[/tex]

⇒ [tex]K_f = \frac{[Ni(NH_3)_4]^{2+}}{[Ni(H_2O)_4^{2+}] [NH_3]^4}[/tex]

Here, we have excluded [tex][H_2O][/tex] as concentration of water will be const.

Now,

This formation of [tex][Ni(NH_3)_4]^{2+}[/tex] proceeds via several steps,

Step 1:

⇒ [tex][Ni(H_2O)_4]^{2+}+NH_3 \rightleftharpoons [Ni(H_2O)_3 (NH_3)]^{2+} + H_2O[/tex]

⇒ [tex]K_1 = \frac{[Ni(H_2O)_3 (NH_3)]^{2+}}{[Ni(H_2O)_4]^{2+} [NH_3]}[/tex]

give one use of zinc​

Answers

Most Zinc are used to galvanise other metals such as iron which helps to prevent rusting
If you need any more let me know

Use dimensional analysis to solve the following problems. Pay attention to correct use of units and correct use of significant figures in calculations. Please show work!

3) Convert 0.250 moles of aluminum sulfate to grams.

4) Convert 2.70 grams of ammonia to moles.

Answers

Answer:

0.000731 grams aluminium sulfate

46.0 mols ammonia

Explanation:

ALS = shorthand for aluminium sulfate which has a molar mass of 342.15 g/mol

[tex]ALS: \frac{0.250mols}{1} *\frac{1g}{342.15mols} = \frac{0.250g}{342.15}=0.0007307 g[/tex]

NH3 has a molar mass of 17.031 g/mol

[tex]NH3: \frac{2.70g}{1} *\frac{17.031mols}{1g} = \frac{0.250g}{342.15}=45.9837 mols[/tex]

Aluminium sulphate (AlS) whose molar mass is= [tex]\sf{ 342.15\dfrac{g}{mol} }[/tex]

we have to find the 0.250 moles of aluminum sulphate.

[tex]\implies AlS=\dfrac{1g}{342.15~mole}×0.250~mole \\\\\implies AlS=\dfrac{0.250}{342.15}\\\\\implies \dfrac{\frac{250}{1000}}{\frac{34215}{100}}\\\\\implies \dfrac{250}{1000}×\dfrac{100}{34215}\\\\=0.00073067\approx{0.0007307~g}[/tex]

[tex]\\\\\\[/tex]

Ammonia(NH3) whose molar mass is =[tex]\sf{17.031\dfrac{mol}{g} }[/tex]

We have to find 2.70 grams of ammonia

[tex]\implies NH_{3}=\dfrac{17.031~mol}{1g}×2.70g\\\\ 17.031×2.70\\\\\dfrac{17031}{1000}×\dfrac{270}{100}\\\\ \dfrac{4598370}{100000}\\\\=45.9837\approx{46~mole}[/tex]

what is Lewis acid and Lewis base? give examples​

Answers

Explanation:

example is copper iron...........


0.28 M Ca(NO3)2
Express your answer using two significant figures.

Answers

Answer:

Mass=Moles × RFM

Mass= 0.28M× 164

Mass= 45.92 grammes

Ethylene glycol (C2H6O2) is mixed with water to make auto engine coolants. How many grams of C2H6O2 are in 5.00 L of a 6.00 M aqueous solution

Answers

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.

examples s name of thosse food items we can store for a month?​

Answers

Answer:

1. Nuts

2. Canned meats and seafood

3. Dried grains

4. Dark chocolate

5. Protein powders

Calculate the concentration of ammonium nitrate in a solution prepared by dissolving 3.20 g of the salt in enough water to make 100. mL of solution, then diluting 2.00 mL of this solution to a volume of 25.00 mL.

Answers

Answer:

.032 M .

Explanation:

Molecular weight of ammonium nitrate is 80  .

3.2 g = 3.2 / 80 moles

= .04 moles

volume = 100 mL = 0.1 L

Molarity of 100 mL solution = .04 moles / 0.1 L

= 0.4 M solution.

Now 2 mL solution of 0.4 M is diluted to a volume of 25 mL .

Using the formula S₁ V₁ = S₂V₂

0.4 M x 2 mL = S₂ x 25 mL

S₂ = .4 x 2 / 25

= .032 M

Hence required concentration is .032 M .

What is the direct function of the energy released from the nuclear chain reaction in a nuclear power plant? turning the blades of the turbine heating water to produce steam powering the condenser carrying electricity from the plant to consumers

Answers

Answer:

the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical

In a nuclear reaction, the  direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .

What are nuclear reactions?

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ7

Assuming tea leaves contain 5.0% caffeine by weight what is the maximum weight of caffeine you could isolate from 10.g of tea leaves? Show your work.

Answers

Answer:

0.50 g Caffeine

Explanation:

Step 1: Given data

Concentration of caffeine by weight in tea leaves: 5.0%

Mass of tea leaves: 10. g

Step 2: Calculate the maximum weight of caffeine that can be isolated

The concentration of caffeine by weight in tea leaves is 5.0%, that is, there are 5.0 g of caffeine per 100 g of tea leaves. The maximum weight of caffeine in 10. g of tea leaves is:

10. g Tea leaves × 5.0 g Caffeine/100 g Tea leaves = 0.50 g Caffeine

Explain the term global warming​

Answers

Answer: A gradual increase in the overall temperature of the earth's atmosphere generally attributed to the greenhouse effect caused by increased levels of carbon dioxide, chlorofluorocarbons, and other pollutants.

Explanation:

Is sucrose classified as aldose or ketose?

Answers

Answer:

Because sucrose is a complex disaccharide, it is not classified as either an aldose or a ketone. Instead, it is a compound that contains both. glucose is aldose sugar and fructose is a ketose sugar.

Carbonic anhydrase is strongly inhibited by the drug acetazolamide, which is used as a diuretic (i.e., to increase the production of urine) and to lower excessively high pressure in the eye (due to accumulation of intraocular fluid) in glaucoma.

a. True
b. False

Answers

Answer:

a. True

Explanation:

There is strong inhibition of Carbon Anhydrase by Aceta-zolamide Carbonic Anhydrase. The drug acetazolamide is used as diuretic which increase the urine production in human body. It lowers pressure in eye in glaucoma.

办理教留服学位学历认证Q/微29304199英属哥伦比亚UBC毕业证文凭学位证书offer操办英属哥伦比亚留信认证成绩单

Answers

Answer:

please translate in english

The compound chromium(II) chloride is a strong electrolyte. Write the transformation that occurs when solid chromium(II) chloride dissolves in water. Be sure to specify states such as (aq) or (s).

Answers

Answer:

CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)

Explanation:

Chromium (II) chloride is a strong electrolyte, that is, when dissolved in water, it completely dissociates into the ions. The cation is chromium (II) and the anion is chloride. The balanced equation for the solution of chromium (II) chloride is:

CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)

How many colors are there in a rainbow?

Answers

[tex]\boxed{\large{\bold{\blue{ANSWER~:) }}}}[/tex]

There are 7 colours in a rainbow

The colours of the rainbow are Red, Orange, Yellow, Green, Blue, Indigo and Violet.

Explanation:

there r seven colors in a rainbow.red, orange, yellow, green, blue, indigo and violet.

hope it helps.stay safe healthy and happy..


Plastic is a polymer
-True
-False

Answers

TRUE

Explanation:

*not sure about this answer

True I believe

Hope I’m right sorry if I’m not

repining of fruits is which type of change​

Answers

Answer:

irreversible.

I hope this will help you

Chemical Change. Hope it will help you

Help naming this plzzzzzzzzzzzzz

Answers

Answer:

A. 3-chloro-1-methylcyclobutane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to infer that the name of this compound is A. 3-chloro-1-methylcyclobutane because of the fact that the parent chain is a cyclobutane which starts by the methyl radical as it has the priority over the chlorine radical which is actually named first at the third carbon (clockwise).

Therefore the name is given in A, accordingly to the IUPAC rules of nomenclature.

Regards!

A hydrocarbon contains only the elements____?

Answers

Explanation:

elements are carbons and hydrogen

Answer:

Carbon and Hydrogen.

Explanation:

It’s in the name Hydro (H) Carbon (C)

A student attempts to separate 4.656 g of a sand/salt mixture just like you did in this lab. After carrying out the experiment, she recovers 2.775 g of sand and 0.852 g of salt.a. What was the percent composition of sand in the mixture according to the student's data? b. What was the percent recovery?

Answers

Answer:

Explanation:

a ) Total mixture = 4.656 g

Sand recovered = 2.775 g

percent composition of sand in the mixture

= (2.775 g / 4.656 g ) x 100

= 59.6 % .

b )

Total of sand and salt recovered = 2.775 g + .852 g = 3.627 g .

Total mixture = 4.656 g

percent recovery = (3.627 / 4.656 ) x 100

= 77.9 % .

If a 520 mg sample of technetium-99 is used for diagnostic procedure, how much of Tc-99 remains after 30.0h? Half life of Tc-99 is 6.0 hours.

Answers

16.25 mg
I have attached an image of the half life formula.
In this problem, N0 would be 520, since that is the initial amount.
t = 30.0 Hours
t 1/2 = 6.0 hours
Now plug everything into the equation. You get 16.25 mg. No

Choose the correct answer to make the statement true.

a. An exothermic reaction has a positive ΔH and absorbs heat from the surroundings.
b. An exothermic reaction feels warm to the touch. a positive ΔH and gives off heat to the surroundings.
c. An exothermic reaction feels warm to the touch. a negative ΔH and absorbs heat from the surroundings.
d. An exothermic reaction feels warm to the touch. a negative ΔH and gives off heat to the surroundings.
e. An exothermic reaction feels warm to the touch.

Answers

D.
The prefix “exo” indicates a release. “-thermic” indicates heat. Because there is a release of heat, the reaction gives off heat and is warm to the touch. ΔH is negative because there is a loss of heat energy.

Tick (√) the statements that are correct.

a) By eating rice alone, we can fulfil nutritional requirement of our body. ( )
b) Deficiency Diseases can be prevented by eating a balanced diet. ( )
c) Balanced diet for the body should contain a variety of food items. ( )
d) Meat alone. is sufficient to provide all nutrients to the body. ( )​

Answers

b) (√)

c)(✓)

hsjdhfjdkskkshd

sự sắp xếp nguyên tử trong vật chất

Answers

Answer:

sosksjsjjs

Explanation:

even i know how to type şïllily

What is the molecular geometry of CIO3F as predicted by the VSEPR model?

Multiple Choice
trigonal pyramidal
square planar
square pyramidal
tetrahedral
octahedral

Answers

Explanation:

since there are no lone pairs on the central atom, the shape will be tetrahedral

A ligand is a molecule or ion that acts as a

Answers

Answer:

Lewis base/electron pair donors

Explanation:

Ligands are ions or neutral molecules which bond together with a central ion. They act as election pair donors, also known as Lewis bases, while the central ion they are connected to acts as the acceptor.

Therefore, a ligand is a molecule or ion that acts as a Lewis base/electron pair donors

Proteins are:
amino acids.
carbohydrates.
minerals.
sugars.

Answers

Proteins are Amino acids
Proteins are made of amino acids. They are macromoluces made up of smaller amino acid chains.

Hope this helps. Please consider making me the Brainliest, it’s not necessary but it is appreciated as I put time and research into each answer. Have a great day, stay safe and stay healthy.

how many ml of 0.032 molar kmno4 are required to react with 50.0 ml of 0.100 molar h2c2o4 in the presence of excess h2so4

Answers

Answer:

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

Explanation:

The balanced reaction is:

2 KMnO₄ + 5 H₂C₂O₄ + 3 H₂SO₄ → K₂SO₄ + 2 MnSO₄ + 8 H₂O + 10 CO₂

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

KMnO₄: 2 moles H₂C₂O₄: 5 moles H₂SO₄: 3 moles K₂SO₄: 1 mole MnSO₄: 2 moles H₂O: 8 moles CO₂: 10 moles

Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.

The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex]

In this case, 50 mL (0.05 L) of 0.1 M H₂C₂O₄ react. So, replacing the data in the definition of molarity:

[tex]0.1 M=\frac{number of moles of solute}{0.05 L}[/tex]

Solving:

number of moles of solute= 0.1 M*0.05 L

number of moles of solute= 0.005 moles

So, 0.005 moles of H₂C₂O₄ react.  Then you can apply the following rule of three: if by stoichiometry 5 moles of H₂C₂O₄ react with 2 moles of KMnO₄, 0.005 moles of H₂C₂O₄ react with how many moles of KMnO₄?

[tex]moles of KMnO_{4} =\frac{0.005moles of H_{2} C_{2} O_{4}* 2moles of KMnO_{4} }{5moles of H_{2} C_{2} O_{4} }[/tex]

moles of KMnO₄= 0.002 moles

Knowing that the molarity of KMnO₄ is 0.032 M, replacing in its definition and solving:

[tex]0.032 M=\frac{0.002 moles}{volume}[/tex]

[tex]volume=\frac{0.002 moles}{0.032 M}[/tex]

volume= 0.0625 L= 62.5 mL

62.5 ml of 0.032 M  KMnO₄ are required to react with 50.0 ml of 0.100 molar H₂C₂O₄ in the presence of excess H₂SO₄

A gas occupies a volume of 202 ml at a pressure of 505 torr. To what pressure must the gas be subject in order to change the volume to 65.0 ml

Answers

Answer:

1569 torr

Explanation:

Assuming ideal behaviour and constant temperature, we can solve this problem by using Boyle's law, which states:

V₁P₁ = V₂P₂

Where in this case:

V₁ = 202 mLP₁ = 505 torrV₂ = 65.0 mLP₂ = ?

We input the data given by the problem:

202 mL * 505 torr = 65.0 mL * P₂

And solve for P₂:

P₂ = 1569 torr
Other Questions
What do is mean by environment friendly behaviour? 1/ Bng kin thc hc trong tm l hc; hy l gii v phn tch, ti sao trong bi th Trng ca mi ngi ca tc gi L Hng Thin, mi ngi li c mt cm nhn khc nhau v hnh nh Trng . Trng ca mi ngiM bo trng nh li limng rng trng ta con tuyn cong muiB nhn nh ht cau phiChu ci qu chui vng ti ngoi triB nh khi vt Trng SnTrng nh cnh vng chp chn trong my.2/ So snh qu trnh t duy v tng tng. Cho v d minh ha List some Characteristic of fruits. which areas of Earth receive the greatest and the least solar irradiance? 5 2/10 x -10 1/3WILL GIVE BRAINLIEST!!! Could someone please help me out? Select the statement about human impact on the environment that is FALSE. The number of humans engaging in a specific activity impacts the severity of the issue. Damaging the environment threatens human and ecosystem health. Pesticide and fertilizer use by humans is particularly damaging to the environment. Urban growth leads to increased waste, which leads to climate change. Determine the number of moles of aluminum in 2.154 x 10-1 kg of Al. Group of answer choices 5816 mol 7.984 mol 6.02 X 1023 mol 4.801 mol 8.783 Why does the weight of a body differ on different celestial bodies of the universe? help pls :( I only need one question to pass 1: I hope the ............can repair our car quickly. A. mechanic B. reporter C. surgeon D. engineer 2.He got drunk after drinking .A. a school of wine B. a sip of wine C. a flock of wine D. a band of wine A new stable element with an atomic number of 120 and an atomic mass of 246 is created in a particle accelerator. Enough of this element is created to determine that it combines with chlorine in a 1:2 ratio. Element 120 should be placed in the same group as _____ on the periodic table. A physical trainer decides to collect data to see if people are actually weight changing weight during the shelter in place. He believes there will not be a meaningful change in weight due to the shelter in place order. He randomly chooses a sample of 30 of his clients. From each client, he records their weight before the shelter in place order, and again 10 days after the order. A summary of the data is below.The trainer claims, "on average, there is no difference in my clients' weights before and after the shelter in place order." Select the pair of hypotheses that are appropriate for testing this claim.H0: d = 0H1: d < 0 (claim)H0: d = 0 (claim)H1: d 0H0: d 0 (claim)H1: d = 0H0: d = 0 (claim)H1: d > 0H0: d = 0H1: d > 0 (claim)H0: d = 0H1: d 0 (claim)H0: d = 0 (claim)H1: d < 0H0: d 0H1: d = 0 (claim)b) Select the choice that best describes the nature and direction of a hypothesis test for this claim.This is a right-tail t-test for d.This is a right-tail z-test for d.This is a two-tail t-test for d.This is a two-tail z-test for d.This is a left-tail t-test for d.This is a left-tail z-test for d.c) Find the standardized test statistic for this hypothesis test. Round your answer to 2 decimal places.d) Find the P-value for this hypothesis test. Round your answer to 4 decimal places.e) Using your previous calculations, select the correct decision for this hypothesis test.Fail to reject the alternative hypothesis.Reject the alternative hypothesis.Fail to reject the claim.Reject the claim.Fail to reject the null hypothesis.Reject the null hypothesis.f) Consider the following statements related to the trainer's claim. Interpret your decision in the context of the problem (ignoring the claim) and interpret them in the context of the claim. classroom layout1.What other additional classroom furniture such as filling cabinets, bookshelves, working tables will there be?2.Do you have other specific needs that is important for your specific subject?3.How many classroom bulletin boards will you have?4.What other classroom display ideas as swimming pool around in your head? 1. In what ways was the rise of classic rock driven by technology?2. How did the teen idol phenomenon of the 1990s mirror that of the 1960s, and how did it differ? If you were asked to measure the success of a campaign to fight for human rights, what criteria would you use? True or false: You can create a network with two computers.AnswerTrue arrange0.2,,30%,10%in ascending and descending order Forcus on the yellow highlighted texts, your help is appreciated.[tex]{ \sf{ \red{no \: pranks}}}[/tex] many student in rural area do not get access to quality education they struggle to find well paid job after graduating from University