A rectangle has a length of 12 mm and a width of 15 mm. Which statement best describes the change in the
A new rectangle was created by multiplying all of the perimeter of the new rectangle?
dimensions by a scale factor of Ş.
1
The new perimeter will be times the perimeter of
2
the original rectangle.
1
O The new perimeter will be times the perimeter of
3
15 mm
5 mm
the original rectangle.
4 mm
O The new perimeter will be 2 times the perimeter of
the original rectangle.
12 mm
O The new perimeter will be 3 times the perimeter of
the original rectangle.

9514 1404 393

Answer:

  a = 94.8, B = 29.3°, C = 31.7°

Step-by-step explanation:

Side 'a' can be found using the Law of Cosines:

  a² = b² +c² -2bc·cos(A)

  a = √(2809 +3249 -6042·cos(119°)) ≈ √8987.22 ≈ 94.8

Then one of the other angles can be found from the Law of Sines.

  sin(C)/c = sin(A)/a

  C = arcsin(c/a·sin(A)) ≈ arcsin(0.525874) ≈ 31.7°

Then the remaining angle can be found to be ...

  B = 180° -A -C = 180° -119° -31.7° = 29.3°

__

The solution is a ≈ 94.8, B ≈ 29.3°, C ≈ 31.7°.

Answer:

9.24

Step-by-step explanation:

Answer:

[tex] {r}^{2} - 4s + {s}^{2} = 8r + 2s = 28 \\ \\ r = \frac{24}{5 } - i \frac{ \sqrt[4]{129} }{5} \\ \: s = \frac{58}{5} + i \frac{ \sqrt[2]{129} }{5 } \\ \\ r = \frac{24}{5} + i \frac{ \sqrt[4]{129} }{5} \\ s = \frac{58}{5} - i \frac{ \sqrt[2]{129} }{5} [/tex]

Answer:

See Explanation

Step-by-step explanation:

Given

Let

[tex]s \to Strawberry[/tex]

[tex]b \to Banana[/tex]

So:

[tex]s:b = 2:3[/tex]

Required

Complete the table

The table, to be complete, is not given; so, I will generate one myself.

The table is generated as follows:

Multiply by 1.5

[tex]s : b = 3 : 4.5[/tex]

Multiply by 2

[tex]s : b = 2*2 : 2 * 3[/tex]

[tex]s : b = 4 : 6[/tex]

And so on....

In summary, whatever factor is multiplied to S must be multiplied to B

(4) y = (3 - 2x)³ + 24x

Use the power and chain rules:

dy/dx = 3 (3 - 2x)² d/dx [3 - 2x] + 24

dy/dx = 3 (3 - 2x)² (-2) + 24

dy/dx = -24x ² + 72x - 30

(5) y = 54x - (2x - 7)³

Same basic procedure:

dy/dx = 54 - 3 (2x - 7)² d/dx [2x - 7]

dy/dx = 54 - 3 (2x - 7)² (2)

dy/dx = -24x ² + 168x - 240

Answer:  True

=========================================================

Explanation:

If you meant to say [tex]f(x) = \frac{2x+3}{x^2-4}[/tex], then we cannot have x^2-4 equal to 0

We can never have 0 in the denominator.

Set the expression equal to 0 and solve for x

x^2 - 4 = 0

(x-2)(x+2) = 0 .... difference of squares rule

x-2 = 0 or x+2 = 0

x = 2 or x = -2

So if either x = 2 or x = -2, then we have x^2-4 equal to zero.

So these are the values we must kick out of the domain to avoid a division by zero error.

In short, the restrictions for x are 2 and -2. That's why the statement is true.

Answer:

sorry my bad bro I have no clue

Answer:

The table in the attachment is the right option

Step-by-step explanation:

A table that represents a function must have exactly one y-value assigned to every x-value. In other words, a table that is a function cannot have any x-value (input) with two corresponding different y-values (outputs).

The table in the attachment below represents a relation that is non-function because it has two outputs, 5 and 7, that are assigned or corresponding to one input, 7.

Answer:

x = 76

Step-by-step explanation:

A line has an angle measurement of 180 degrees.

Knowing that, let's first find the angle measurement of DIJ:

180 - 107 = 73

Angle DIJ has an angle measurement of 73

To find the angle measurement of DJI, we have to apply knowledge of angles in a triangle. When you add all the angles in a triangle, they ALWAYS equal to 180 degrees.

Using that knowledge, we can add 73 and 31 and subtract that value from 180:

73 + 31 = 104

180 - 104 = 76

The angle measurement of Angle DJI is 76.

Because vertical angles are ALWAYS going to have the same angle measurement, Angle AJF is going to have an angle measurement of 76 as well.

So x = 76

Hope that helps (●'◡'●)

Answer:

a. 2

b. The 90% confidence interval for the difference between the two population means is (1.02, 2.98).

c. The 95% confidence interval for the difference between the two population means is (0.83, 3.17).

Step-by-step explanation:

Before solving this question, we need to understand the central limit theorem and the subtraction of normal variables.

Central Limit Theorem

The Central Limit Theorem establishes that, for a normally distributed random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the sampling distribution of the sample means with size n can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].

For a skewed variable, the Central Limit Theorem can also be applied, as long as n is at least 30.

Subtraction between normal variables:

When two normal variables are subtracted, the mean is the difference of the means, while the standard deviation is the square root of the sum of the variances.

Sample 1:

[tex]\mu_1 = 13.6, s_1 = \frac{2.2}{\sqrt{50}} = 0.3111[/tex]

Sample 2:

[tex]\mu_2 = 11.6, s_2 = \frac{3}{\sqrt{35}} = 0.5071[/tex]

Distribution of the difference:

[tex]\mu = \mu_1 - \mu_2 = 13.6 - 11.6 = 2[/tex]

[tex]s = \sqrt{s_1^2+s_2^2} = \sqrt{0.3111^2+0.5071^2} = 0.595[/tex]

a. What is the point estimate of the difference between the two population means?

Sample difference, so [tex]\mu = 2[/tex]

b. Provide a 90% confidence interval for the difference between the two population means.

We have that to find our [tex]\alpha[/tex] level, that is the subtraction of 1 by the confidence interval divided by 2. So:

[tex]\alpha = \frac{1 - 0.9}{2} = 0.05[/tex]

Now, we have to find z in the Z-table as such z has a p-value of [tex]1 - \alpha[/tex].

That is z with a pvalue of [tex]1 - 0.05 = 0.95[/tex], so Z = 1.645.

The margin of error is:

[tex]M = zs = 1.645(0.595) = 0.98[/tex]

The lower end of the interval is the sample mean subtracted by M. So it is 2 - 0.98 = 1.02

The upper end of the interval is the sample mean added to M. So it is 2 + 0.98 = 2.98

The 90% confidence interval for the difference between the two population means is (1.02, 2.98).

c. Provide a 95% confidence interval for the difference between the two population means.

Following the same logic as b., we have that [tex]Z = 1.96[/tex]. So

[tex]M = zs = 1.96(0.595) = 1.17[/tex]

The lower end of the interval is the sample mean subtracted by M. So it is 2 - 1.17 = 0.83

The upper end of the interval is the sample mean added to M. So it is 2 + 1.17 = 3.17

The 95% confidence interval for the difference between the two population means is (0.83, 3.17).

Answer:

3.1 gallons

Step-by-step explanation:

To solve this, we need to figure out how many gallons of gas go into 72 miles. We know 23 miles is equal to one gallon of gas, and given that the ratio of miles to gas stays the same, we can say that

miles of gas / gallons = miles of gas / gallons

23 miles / 1 gallon = 72 miles / gallons needed to go to Bob's mother's house

If we write the gallons needed to go to Bob's mother's house as g, we can say

23 miles / 1 gallon = 72 miles/g

multiply both sides by 1 gallon to remove a denominator

23 miles = 72 miles * 1 gallon /g

multiply both sides by g to remove the other denominator

23 miles * g = 72 miles * 1 gallon

divide both sides by 23 miles to isolate the g

g = 72 miles * 1 gallon/23 miles

= 72 / 23 gallons

≈ 3.1 gallons

Answer:

[tex]y=\displaystyle\frac{1}{2}x+4[/tex]

Step-by-step explanation:

Hi there!

What we need to know:

1) Determine the slope (m)

[tex]2x + y = 7[/tex]

Reorganize the given equation into slope-intercept form; subtract 2x from both sides to isolate y:

[tex]2x + y-2x = -2x+7\\y= -2x+7[/tex]

Now, we can easily identify the slope of the line to be -2. Because perpendicular lines always have slopes that are negative reciprocals, the slope of a perpendicular line would be [tex]\displaystyle\frac{1}{2}[/tex]. Plug this into [tex]y=mx+b[/tex]:

[tex]y=\displaystyle\frac{1}{2}x+b[/tex]

2) Determine the y-intercept (b)

[tex]y=\displaystyle\frac{1}{2}x+b[/tex]

Plug in the given point (2,5) and solve for b:

[tex]5=\displaystyle\frac{1}{2}(2)+b\\\\5=1+b[/tex]

Subtract 1 from both sides to isolate b:

[tex]5-1=\displaystyle\frac{1}{2}(2)+b-1\\4=b[/tex]

Therefore, the y-intercept of the line is 4. Plug this back into [tex]y=\displaystyle\frac{1}{2}x+b[/tex]:

[tex]y=\displaystyle\frac{1}{2}x+4[/tex]

I hope this helps!

Answer:

(0 ; 3)

Step-by-step explanation:

hello :

the midpoint of the line segment is : ((-2+2)/2 ;(-2+8)/2 )

(0 ; 3)

Solution :

Group   Before     After

Mean    693.75    743.75

Sd         155.37     143.92

SEM        54.93     50.88

n              8            8

Null hypothesis : The preparation course not effective.

[tex]$H_0: \mu_d = 0$[/tex]

Alternative hypothesis : The preparation course is effective in improving the exam scores.

[tex]$H_a : \mu_d>0$[/tex]  (after -  before)

Answer:

3:8

Step-by-step explanation:

i will gadit

that only

Answer:

y=6

Step-by-step explanation:

Differentiate the equation

dy/dx=2x-8

Find the value of x in equation form

2x-8=0

x=8/2=4

Now x=4 is the line of symmetry or the parabola of the quadratic equation.

Plug back x=4 into the equation to find the turning point(minimum value)

y=(4)²-8(4)+22

y=16-32+22

y=6

Answer:

(4 , 6) is the vertex. I guess that can be called the "turning point"

Step-by-step explanation:

Use vertex formula : x =  [tex]\frac{-b}{2a}[/tex]

x = [tex]\frac{-(-8)}{(2)(1)}[/tex] = [tex]\frac{8}{2}[/tex] = 4

Substitute x in original equation and solve for y:

y = [tex]4^{2}[/tex] - 8(4) + 22

y = 16 - 32 + 22

y = 6

Answer:

10:3

Step-by-step explanation:

Make 2 1/2 an improper fraction, you will get 5/2. You dont have to do anything to the 3/4.

For you to find the ratio of an fraction, you have to take the numerator but the denominator has to be the same.

So make 5/2 to a 10/4.

Take the numerator 10 & 3.

Your answer will be 10:3

No problem.

Answer:

no

Step-by-step explanation:

Answer: 332 cubic inches

Step-by-step explanation:

You can eliminate 69 and 99 as those answers don't make any sense. This leaves you with 703 and 332.

It says the wall of the pipe is 1.25 inches thick so you multiply that by 2 and subtract it by the diameter to get the insider diameter of 5.5

Now you just use the equation V = (3.14)(r^2)(14) where the radius is half of 5.5.

So to finalize the equation you get V = (3.14)(5.5)^2(14) which comes out to 332 cubic inches

The best choice is 332 cubic inches.

69 cubic inches and 99 cubic inches are less and 703 cubic inches is a large approximation.

Diameter = d= 8 inches

Height= Length = l= 14 inches

Thickness= 1.25 inches

Outer Radius= R= diameter/2= 8/2=4 inches

Inner radius = r= Radius - thickness

                            = 4- 1.25= 2.75 inches

Volume of the cylinder = Area × length

                                      = π r²× l

                                       = 22/7 × (2.75)² × 14

                                          = 332. 616 inches cube

So the best answer is 332 cubic inches

https://brainly.com/question/21067083

Answer:

The number of newborns who weighed between 1614 grams and 5182 grams was of 586.

Step-by-step explanation:

Normal Probability Distribution

Problems of normal distributions can be solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the z-score of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.

The mean weight was 3398 grams with a standard deviation of 892 grams.

This means that [tex]\mu = 3398, \sigma = 892[/tex]

Proportion that weighed between 1614 and 5182 grams:

p-value of Z when X = 5182 subtracted by the p-value of Z when X = 1614.

X = 5182

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{5182 - 3398}{892}[/tex]

[tex]Z = 2[/tex]

[tex]Z = 2[/tex] has a p-value of 0.9772

X = 1614

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{1614 - 3398}{892}[/tex]

[tex]Z = -2[/tex]

[tex]Z = -2[/tex] has a p-value of 0.0228

0.9772 - 0.0228 = 0.9544.

Out of 614 babies:

0.9544*614 = 586

The number of newborns who weighed between 1614 grams and 5182 grams was of 586.

Step-by-step explanation:

here's the answer to your question

⏫

[tex]\boxed{\large{\bold{\textbf{\textsf{{\color{blue}{Answer}}}}}}:)}[/tex]

see this attachment ☝

Answer:

1/425

Step-by-step explanation:

The first card can be any card, so we don’t have to evaluate the probability.

Now we can suppose that the exit card is a two

- For the second card we have 3/51 of possibilities that is a 2 = 1/17

- For the third card we have 2/50 of possibilities that is a 2 = 1/25

1/17 * 1/25 = 1/425

Answer:

0.5679

Step-by-step explanation:

From. The table Given above :

The probability of female Given an advanced degree ;

P(F|A) = p(FnA) / p(A)

From the table, p(FnA) = 322

P(Advanced degree), P(A) = (245 + 322) = 567

Hence,

P(F|A) = p(FnA) / p(A) = 322 / 567 = 0.5679

Answer:

-157.87

Step-by-step explanation:

1) the rules are:

[tex]log_a(bc)=log_ab+log_ac;[/tex]

and

[tex]log_ab^c=c*log_ab.[/tex]

2) according to the rules above:

[tex]log_7(yz^8)=log_7y+8log_7z=-6.19-8*18.96=-157.87.[/tex]

Answer:

8

Step-by-step explanation:

9514 1404 393

Answer:

  see attached

Step-by-step explanation:

Since point P is the center of dilation, it doesn't move. (It is "invariant.") The other points on the figure move to 1/4 of their original distance from P. On this diagram, it is convenient that the distances are all multiples of 4 units, so dividing by 4 is made easy.

Answer:

(-3,5),(-3,-5),(3,5),(3,-5)

Step-by-step explanation:

i changed my answer :)