a radio antenna emits electromagnetic waves at a frequency of 100 mhz and intensity of what is the photon density

Answer:

The magnification is  [tex]m = -2.15[/tex]

Explanation:

From the question we are told that

   The  radius is  [tex]r = 14.0 \ m[/tex]

    The  focal length eyepiece is  [tex]f_e = 3.25 \ m[/tex]

Generally the objective focal length is mathematically represented as

        [tex]f_o = \frac{r}{2}[/tex]

=>     [tex]f_o = \frac{14}{2}[/tex]

=>     [tex]f_o = 7 \ m[/tex]

The  magnification is mathematically represented as

      [tex]m = - \frac{f_o }{f_e }[/tex]

=>    [tex]m = - \frac{7 }{ 3.25 }[/tex]

=>   [tex]m = -2.15[/tex]

Answer:

p-aminoazobenzene is formed

Explanation:

The reaction of benzene diazonium chloride and aniline takes place in a basic medium and leads to the formation of an azo compound which is also a dye. The terminal diazonium nitrogen of the benzene diazonium ion is coupled to the aniline at the para-position. The product of the reaction, p-aminoazobenzene is a yellow dye.

Benzene diazonium chloride is prepared by diazotization of aniline in the presence of hydrochloric acid. The full reaction of aniline and benzene diazonium chloride​ is shown in the image attached to this answer.

Answer:

Study Earth as a whole

Explanation:

ex. oxygen around Earth, layers, formations, temperature, mountains and how they form etc.

Answer:

Geologists study rocks and help to locate useful minerals. Earth scientists often work in the field—perhaps climbing mountains, exploring the seabed, crawling through caves, or wading in swamps. They measure and collect samples (such as rocks or river water), then they record their findings on charts and maps.

Answer: The properties of magnets are used to make electricity. Moving magnetic fields pull and push electrons. Moving a magnet around a coil of wire, or moving a coil of wire around a magnet, pushes the electrons in the wire and creates an electrical current.

Answer:

  λ= 5.4379 10⁻⁷ m = 543.79 nm

Explanation:

The phenomenon of diffraction is described by the expression for destructive diffraction is

           a sin θ = (m + 1/2) λ

           λ = a sin θ / (m + 1/2)

let's reduce the magnitudes to the SI system

           a = 15 um = 15 10⁻⁶ m

           m = 2

           θ = 5.2º

Let's calculate

          λ = 15 10⁻⁶ sin 5.2 / (2 +1/2)

         λ = 5.4379 10⁻⁷ m

Let's reduce to nm

          λ= 5.4379 10⁻⁷ m = 543.79 nm

Answer:

The width is [tex]w_c = 0.00252 \ m[/tex]

Explanation:

From the question we are told that

  The  width of the single slit is  [tex]a = 1.5 \ mm = 1.5 *10^{-3} \ m[/tex]

   The  wavelength is  [tex]\lambda = 420 *10^{-9} \ m[/tex]

   The distance of the screen is  [tex]D = 4.5 \ m[/tex]

Generally the width of the central maximum is  

        [tex]w_c = 2 * y[/tex]

where y is the width of the first maxima which is mathematically represented as

       [tex]y = \frac{\lambda * D}{a}[/tex]

=>   [tex]y = \frac{ 420 *10^{-9} * 4.5}{ 1.5*10^{-3}}[/tex]

=>  [tex]y = 0.00126 \ m[/tex]

So

    [tex]w_c = 2 *0.00126[/tex]

    [tex]w_c = 0.00252 \ m[/tex]

Answer:

Explanation:

Given data

mass of canister= 3.4 kg

force acting on canister= 3 N

initial velocity u= 2.5 m/s

final velocity v= 4.8 m/s

The work done on the canister is the change in kinetic energy on the canister

change in [tex]KE= Kfinal- Kinitial[/tex]

K.E initial

[tex]Kintial= \frac{1}{2} mv^2\\\\Kintial= \frac{1}{2}*2*2.5^2\\\\KInitial= \frac{1}{2} *2*6.25\\\\Kinitial= 6.25J[/tex]

K.E final

[tex]Kfinal= \frac{1}{2} mv^2\\\\ Kfinal= \frac{1}{2}*2*4.8^2\\\\ Kfinal= \frac{1}{2} *2*23.04\\\\ Kfinal= 23.04J[/tex]

The net work done is [tex]KE= Kfinal- Kinitial[/tex]

[tex]W net= 23.04-6.25= 16.79J[/tex]

Answer:

a. The reactance of the inductor is XL = V₀/I₀

b. The inductance of the inductor is L = V₀/2πfI₀

Explanation:

PART A

Since the voltage across the inductor V₀ = I₀XL where V₀ = e.m.f of voltage source, I₀ = current amplitude and XL = reactance of the inductor,

XL = V₀/I₀

So, the reactance of the inductor is XL = V₀/I₀

PART B

The inductance of the inductor is gotten from XL = 2πfL where f = frequency of voltage source and L = inductance of inductor

Since XL = V₀/I₀ = 2πfL

V₀/I₀ = 2πfL

L = V₀/2πfI₀

So the inductance of the inductor is L = V₀/2πfI₀

A) The reactance XL of the inductor :  [tex]\frac{V_{0} }{I_{0} }[/tex]  

B) The Inductance L of the inductor : [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]  

A) Expressing the Reactance of the inductor

Voltage across the Inductor = V₀ = I₀XL   ---- ( 1 )

Where :  V₀ = emf voltage ,  I₀ = current

from equation ( 1 )

∴ XL ( reactance ) = [tex]\frac{V_{0} }{I_{0} }[/tex]  

B ) Expressing the Inductance of the Inductor

Inductance of an inductor is expressed as : XL = 2πfL

from part A

XL = [tex]\frac{V_{0} }{I_{0} }[/tex] = 2πfL

∴ The inductance L of the Inductor expressed in terms of V₀, F and I₀

L = [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]

Hence we can conclude that The reactance XL of the inductor :  [tex]\frac{V_{0} }{I_{0} }[/tex]  and The Inductance L of the inductor : [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]  .

Learn more : https://brainly.com/question/25208405

Answer:

A.   number of neutrons of Magnesium Mg = 13

B.   The average mass of Mg = 22.29 amu

C.   the magnesium composition on Mars is not the same as that on Earth.

Explanation:

Isotopes are atoms with the same atomic number but different mass number. This is due to the difference in mass of the neutrons.

The atomic number of Magnesium Mg = 12

The atomic number of an element is the number of protons present in the atomic nucleus of the element

i.e Atomic number = number of protons = 12

The mass number of an element is the sum of the protons and neutrons in the atomic nucleus of the element.

Mass number = number of protons + number of neutrons

Given that the mass number of Mg = 25

Then;

25 = 12 + number of neutrons

25 - 12 = number of neutrons

13 = number of neutrons

number of neutrons of Magnesium Mg = 13

B. What is the average atomic mass of magnesium in these rocks?

The average atomic mass of an element which exhibit isotopy is the average mass of its various isotopes as they occur naturally in any quantity of the element.

Therefore the average atomic mass of magnesium can be calculated as:

= [tex]\mathtt{\dfrac{(23.9872 \times 79.70) + ( 24.9886 \times 10.13) + (25.9846 \times 10.17) }{79.7 + 10.13 +10.17}}[/tex]

= [tex]\mathtt{\dfrac{(1911.77984) + ( 53.134518) + (264.263382) }{100}}[/tex]

= [tex]\mathtt{\dfrac{2229.17774 }{100}}[/tex]

The average mass of Mg = 22.29 amu

C. Is the magnesium composition on Mars the same as that on Earth? Explain.

The average atomic weight of magnesium on Earth is said to be 24.305 amu while that of Mars is 22.29 amu.

There difference in the average atomic weight result into difference in their composition. Therefore,the magnesium composition on Mars is not the same as that on Earth.

Answer:

The rms current in the circuit is 3.513 A

Explanation:

Given;

angular frequency of the inductor, ω = 363 rad/s

maximum voltage of the inductive AC, V₀ = 169 V

Inductance of the inductor, L = 0.0937 H

Inductive reactance is given by;

[tex]X_L = 2\pi f L= \omega L[/tex]

[tex]X_L = 363 *0.0937\\\\X_L = 34.0131 \ ohms[/tex]

The rms voltage is given by;

[tex]V_{rms} = \frac{V_o}{\sqrt{2} } \\\\V_{rms} =\frac{169}{\sqrt{2} } \\\\V_{rms} = 119.5 \ V[/tex]

The rms current in the circuit is given by;

[tex]I_{rms} = \frac{V_{rms}}{X_L} \\\\I_{rms} = \frac{119.5}{34.0131} \\\\I_{rms} = 3.513 \ A[/tex]

Therefore, the rms current in the circuit is 3.513 A

Explanation:

Answer:

n= speed of light in vacuum/ speed of light in the other medium.

Explanation:

If light is moving from medium 1 into medium 2 where medium 1 is vacuum (approximated to mean air) and we are required to find the velocity of light; then we can confidently write;

n= speed of light in vacuum/ speed of light in the other medium.

Hence;

n= c/v

Where;

n= refractive index of the material

c= speed of light in vacuum

v = speed of light in another medium.

Note that the refractive index is the amount by which a transparent medium decreases the speed of light.

Answer:

0 J

Explanation:

Since work done W = ∫F.dr and F(x, y, z)= z²i + 4xyj + 5y²k and dr = dxi + dyj + dzk

F.dr = (z²i + 4xyj + 5y²k).(dxi + dyj + dzk) = z²dx + 4xydy + 5y²dz

W = ∫F.dr = ∫z²dx + 4xydy + 5y²dz = z²x + 2xy² + 5y²z

We now evaluate the work done for the different regions

W₁ = work done from (0,0,0) to (1,0,0)

W₁ = {z²x + 2xy² + 5y²z}₀₀₀¹⁰⁰ = 0²(1) + 2(1)(0)² + 5(0)²(0) - [(0)²(0) + 2(0)(0)² + 5(0)²(0)] = 0 - 0 = 0 J

W₂ = work done from (1,0,0) to (1,5,1)

W₂ = {z²x + 2xy² + 5y²z}₁₀₀¹⁵¹ =   (1)²(1) + 2(1)(5)² + 5(5)²(1) - [0²(1) + 2(1)(0)² + 5(0)²(0)] =  1 + 50 + 125 - 0 = 176 J

W₃ = work done from (1,5,1) to (0,5,1)

W₃ = {z²x + 2xy² + 5y²z}₁₅₁⁰⁵¹ =   1²(0) + 2(0)(5)² + 5(5)²(1) - [(1)²(1) + 2(1)(5)² + 5(5)²(1)]  = 125 - (1 + 50 + 125) = 125 - 176 = -51 J

W₄ = work done from (0,5,1) to (0,0,0)

W₄ = {z²x + 2xy² + 5y²z}₁₅₁⁰⁰⁰ =   (0)²(0) + 2(0)(0)² + 5(0)²(0) - [1²(0) + 2(0)(5)² + 5(5)²(1)] = 0 - 125 = -125 J

The total work done W is thus

W = W₁ + W₂ + W₃ + W₄

W = 0 J + 176 J - 51 J - 125 J

W = 176 J - 176 J

W = 0 J

The total work done equals 0 J

Answer:

317.22

Explanation:

Given

Circular platform rotates ccw 93.1kg, radius 1.93 m, 0.945 rad/s

You 69.7kg, cw 1.01m/s, at r

Poodle 20.2 kg, cw 1.01/2 m/s, at r/2

Mutt 17.7 kg, 3r/4

You

Relative

ω = v/r

= 1.01/1.93

= 0.522

Actual

ω = 0.945 - 0.522

= 0.42

I = mr^2

= 69.7*1.93^2

= 259.6

L = Iω

= 259.6*0.42

= 109.4

Poodle

Relative

ω = (1.01/2)/(1.93/2)

= 0.5233

Actual

ω = 0.945- 0.5233

= 0.4217

I = m(r/2)^2

= 20.2*(1.93/2)^2

= 18.81

L = Iω

= 18.81*0.4217

= 7.93

Mutt

Actual

ω = 0.945

I = m(3r/4)^2

= 17.7(3*1.93/4)^2

= 37.08

L = Iω

= 37.08*0.945

= 35.04

Disk

I = mr^2/2

= 93.1(1.93)^2/2

= 173.39

L = Iω

= 173.39*0.945

= 163.85

Total

L = 109.4+ 7.93+ 36.04+ 163.85

= 317.22 kg m^2/s

Answer:

The answer is A

Explanation:

Answer:

implausible or untestable scientific claims

Answer:

Increase in frequency of the laser

Explanation:

Because An increase in frequency will result in more lines per centimeter and a smaller distance between each consecutive line. And a decrease in distance between each gratin

Answer:

The blade undergoes 40 revolutions, so neither of the given options is correct!

Explanation:

The revolutions can be found using the following equation:

[tex]\theta_{f} = \theta_{i} + \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]

Where:

α is the angular acceleration

t is the time = 2.5 s

[tex]\omega_{i}[/tex] is the initial angular velocity = 1500 rev/min                

First, we need to find the angular acceleration:

[tex] \alpha = \frac{\omega_{f} - \omega_{i}}{t} = \frac{400 rev/min*2\pi rad*1 min/60 s - 1500 rev/min *2\pi rad*1 min/60 s}{2.5 s} = -46.08 rad/s^{2} [/tex]

Now, the revolutions that the blade undergo are:

[tex]\theta_{f} - \theta_{i} = \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]

[tex]\Delta \theta = 1500 rev/min *2\pi rad*1 min/60 s*2.5 s - \frac{1}{2}*(46.08 rad/s^{2})*(2.5)^{2} = 248.7 rad = 39.9 rev[/tex]        

Therefore, the blade undergoes 40 revolutions, so neither of the given options is correct!

I hope it helps you!                              

Answer:

a

    [tex]n = 1.119 *10^{18} \ photons[/tex]

b

  [tex]P = 1.6 \ W[/tex]

Explanation:

From the question we are told that

    The wavelength is  [tex]\lambda = 2780 nm = 2780 *10^{-9} \ m[/tex]

     The  energy  is  [tex]E = 80 mJ = 80 *10^{-3} \ J[/tex]

This energy is mathematically represented as

     [tex]E = \frac{n * h * c }{\lambda }[/tex]

Where  c is the speed of light with a value  [tex]c = 3.0 *10^{8} \ m/s[/tex]

             h is the Planck's  constant with the value  [tex]h = 6.626 *10^{-34} \ J \cdot s[/tex]

             n is the number of pulses

So

      [tex]n = \frac{E * \lambda }{h * c }[/tex]

substituting values

       [tex]n = \frac{80 *10^{-3} * 2780 *10^{-9}}{6.626 *10^{-34} * 3.0 *10^{8} }[/tex]

       [tex]n = 1.119 *10^{18} \ photons[/tex]

Given that the pulses where emitted 20 times in one second then the period of the pulse is

       [tex]T = \frac{1}{20}[/tex]

      [tex]T = 0.05 \ s[/tex]

Hence the average power of photons in one 80-mJ pulse during 1 s is mathematically represented as

       [tex]P = \frac{E}{T}[/tex]

substituting values

       [tex]P = \frac{ 80 *10^{-3}}{0.05}[/tex]

        [tex]P = 1.6 \ W[/tex]

Answer:

the magnitude of the electric field is 1.25 N/C

Explanation:

The induced emf in the cube ε = LB.v where B = magnitude of electric field = 5 T , L = length of side of cube = 1 cm = 0.01 m and v = velocity of cube = 1 m/s

ε = LB.v = 0.01 m × 5 T × 1 m/s = 0.05 V

Also, induced emf in the cube ε = ∫E.ds around the loop of the cube where E = electric field in metal cube

ε = ∫E.ds

ε = Eds since E is always parallel to the side of the cube

= E∫ds  ∫ds = 4L since we have 4 sides

= E(4L)

= 4EL

So,4EL = 0.05 V

E = 0.05 V/4L

= 0.05 V/(4 × 0.01 m)

= 0.05 V/0.04 m

= 1.25 V/m

= 1.25 N/C

So, the magnitude of the electric field is 1.25 N/C

The magnitude of the electric field is 1.25 N/C

But before that the following calculations need to be done.

ε = LB.v = 0.01 m × 5 T × 1 m/s

= 0.05 V

Now

ε = ∫E.ds

here ε = Eds because E is always parallel to the side of the cube

So,

= E∫ds  ∫ds

= 4L so we have 4 sides

Now

= E(4L)

= 4EL

So,4EL = 0.05 V

Now

E = 0.05 V/4L

= 0.05 V/(4 × 0.01 m)

= 0.05 V/0.04 m

= 1.25 V/m

= 1.25 N/C

hence, The magnitude of the electric field is 1.25 N/C

learn more about electric field here: https://brainly.com/question/1834208

Answer:

[tex]f=1.13s^{-1}=1.13Hz[/tex]

Explanation:

Hello,

In this case, a frequency stands for a rate in which some action is done per unit of time. In this case, for the heartbeat, since 68 actions (heartbeats) occur in 1.0, the frequency turns out:

[tex]f=\frac{68}{1.0min}=68min^{-1}[/tex]

Or as most commonly used in Hz ([tex]s^{-1}[/tex]):

[tex]f=68\frac{1}{min} *\frac{1min}{60s}=1.13s^{-1}=1.13Hz[/tex]

Best regards.

Answer:

a) 360.7 J/s

b) 16.23 °C

c) 34.48 g

Explanation:

The mass of the person = 80 kg

The person is a perfect emitter, ε = 1

surface area of the person = 2.5 m^2

a) If he emits radiation at 37 °C, [tex]T_{out}[/tex] = 37 + 273 = 310 K

and receives radiation at 13 °C, [tex]T_{in}[/tex] = 13 + 273 = 286 K

Rate of energy loss E = Aεσ([tex]T^{4} _{out}[/tex] - [tex]T^{4} _{in}[/tex] )

where σ = 5.67 x 10^-8 J/(s m^2 K^4)

substituting values, we have

E = 2.5 x 1 x 5.67 x 10^-8 x ([tex]310^{4}[/tex] - [tex]286^{4}[/tex]) = 360.7 J/s

b) If they have specific heat about equal to that of water = 1 Cal/kg-°C

but 1 Cal = 1 kcal = 10^3 cal

specific heat of person is therefore = 10^3 cal/kg-°C

heat loss = 360.7 J/s = 360.7 x 3600 = 1298520 J/hr

heat lost in 1 hour = 1 x 1298520 = 1298520 J

This heat lost = mcΔT

where ΔT is the temperature fall

m is the mass

c is the specific heat equivalent to that of water

the specific heat is then = 10^3 cal/kg-°C

equating, we have

1298520 = 80 x 10^3 x ΔT

1298520 = 80000ΔT

ΔT = 1298520/80000 = 16.23 °C

c) 1298520 J = 1298520/4184 = 310.35 Cal

density of fat = 9 Cal/g

gram of fat = 310.35/9 = 34.48 g

Given that,

Central maximum = 1 cm

Distance from the window shade to the wall =4 m

We know that,

The visible range of the sun light is 400 nm to 700 nm.

(a). We need to calculate the average wavelength

Using formula of average wavelength

[tex]\lambda_{avg}=\dfrac{\lambda_{1}+\lambda_{2}}{2}[/tex]

Put the value into the formula

[tex]\lambda_{avg}=\dfrac{400+700}{2}[/tex]

[tex]\lambda_{avg}=550\ nm[/tex]

(b). We need to calculate the diameter of the pinhole

Using formula for diameter

[tex]w=\dfrac{2.44\lambda L}{D}[/tex]

[tex]D=\dfrac{2.44\lambda L}{w}[/tex]

Put the value into the formula

[tex]D=\dfrac{2.44\times550\times10^{-9}\times4}{1\times10^{-2}}[/tex]

[tex]D=0.537\ mm[/tex]

Hence, (a). The average wavelength 550 nm.

(b). The diameter of the pinhole is 0.537 mm.

Answer:

The  angular acceleration is  [tex]\alpha = 3.235 \ rad/s ^2[/tex]

Explanation:

From the question we are told that

    The moment of inertia is  [tex]I = 0.034\ kg \cdot m^2[/tex]

     The  net torque is  [tex]\tau = 0.11\ N \cdot m[/tex]

Generally the net torque is mathematically represented as

           [tex]\tau = I * \alpha[/tex]

Where [tex]\alpha[/tex] is the angular acceleration so  

        [tex]\alpha = \frac{\tau }{I}[/tex]

substituting values

         [tex]\alpha = \frac{0.1 1}{ 0.034}[/tex]

        [tex]\alpha = 3.235 \ rad/s ^2[/tex]

Answer:

9.43*10^3 year

Explanation:

For this question, we ought to remember, or know that the half life of carbon 14 is 5730, and that would be vital in completing the calculation

To start with, we use the formula

t(half) = In 2/k,

if we make k the subject of formula, we have

k = in 2/t(half), now we substitute for the values

k = in 2 / 5730

k = 1.21*10^-4 yr^-1

In(A/A•) = -kt, on rearranging, we find out that

t = -1/k * In(A/A•)

The next step is to substitite the values for each into the equation, giving us

t = -1/1.21*10^-4 * In(5.4/15.3)

t = -1/1.21*10^-4 * -1.1041

t = 0.943*10^4 year

Answer:

Qsinθ/4πε₀R²θ

Explanation:

Let us have a small charge element dq which produces an electric field E. There is also a symmetric field at P due to a symmetric charge dq at P. Their vertical electric field components cancel out leaving the horizontal component dE' = dEcosθ = dqcosθ/4πε₀R² where r is the radius of the arc.

Now, let λ be the charge per unit length on the arc. then, the small charge element dq = λds where ds is the small arc length. Also ds = Rθ.

So dq = λRdθ.

Substituting dq into dE', we have

dE' = dqcosθ/4πε₀R²

= λRdθcosθ/4πε₀R²

= λdθcosθ/4πε₀R

E' = ∫dE' = ∫λRdθcosθ/4πε₀R² = (λ/4πε₀R)∫cosθdθ from -θ to θ

E' = (λ/4πε₀R)[sinθ] from -θ to θ

E' = (λ/4πε₀R)[sinθ]

= (λ/4πε₀R)[sinθ - sin(-θ)]

= (λ/4πε₀R)[sinθ + sinθ]

= 2(λ/4πε₀R)sinθ

= (λ/2πε₀R)sinθ

Now, the total charge Q = ∫dq = ∫λRdθ from -θ to +θ

Q = λR∫dθ = λR[θ - (-θ)] = λR[θ + θ] = 2λRθ

Q = 2λRθ

λ = Q/2Rθ

Substituting λ into E', we have

E' = (Q/2Rθ/2πε₀R)sinθ

E' = (Q/θ4πε₀R²)sinθ

E' = Qsinθ/4πε₀R²θ where θ is in radians

Answer:

[tex]q = -461532.5 \ C[/tex]

Explanation:

From the question we are told that

     The  electric filed is  [tex]E = 102 \ N/C[/tex]  

Generally according to Gauss law

=>   [tex]E A = \frac{q}{\epsilon_o }[/tex]

Given that  the electric field is pointing downward  , the equation become

    [tex]- E A = \frac{q}{\epsilon_o }[/tex]

Here   [tex]q[/tex] is the excess charge on the surface of the earth

          [tex]A[/tex] is the surface  area of the of the earth which is mathematically represented as

     [tex]A = 4\pi r^2[/tex]

Where r is the radius of the earth which has a value [tex]r = 6.3781*10^6 m[/tex]

 substituting values

    [tex]A = 4 * 3.142 * (6.3781*10^6 \ m)^2[/tex]

    [tex]A =5.1128 *10^{14} \ m^2[/tex]

So

   [tex]q = -E * A * \epsilon _o[/tex]

Here [tex]\epsilon_o[/tex] s the permitivity of free space with value

          [tex]\epsilon_o = 8.85*10^{-12} \ m^{-3} \cdot kg^{-1}\cdot s^4 \cdot A^2[/tex]

substituting values

     [tex]q = -102 * 5.1128 *10^{14} * 8.85 *10^{-12}[/tex]

     [tex]q = -461532.5 \ C[/tex]

Explanation:

In order of Increasing Wavelength of the Electromagnetic Spectrum :

B) X rays

D) Visible light

A) Microwave

C) Radio Waves

Electromagnetic waves in order of decreasing wavelength  is X-rays,visible light,microwaves and radio waves.

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic waves,here:

https://brainly.com/question/3001269

#SPJ2

Answer:

Option (A) : 1m

Explanation:

According to Hooke's law:

F (spring elastic force) =

k( spring const.) * x(displacement)

Case-1

2 N = k * 0.4m

k = 5

Case- 2

5 N = 5 * x

x ( displacement) = 1 m

The displacement of the spring if a 5-N force was applied is equal to 1m. Therefore, option (1) is correct.

The strain and stress are proportional to each other, and this is called Hooke’s Law. Hooke’s law states that the strain is proportional to the stress applied within the elastic limit of the material.

When the materials are stretched, the atoms or molecules deform and when the stress is removed, they will return to their original state.

The mathematical equation for Hooke's law is as follows:

F = –kx

where F is the force, x is displacement, and k is the spring constant in N/m.

Given, F = 2N and x = 0.4m

F = -kx

2 N = - k (0.4m)

k = 5 N/m where the negative sign is omitted.

Now, the spring constant of the spring, k = 5 N/m and F = 5N

F = -kx

5 N = - (5 N/m)(x)

x = - 1m

Therefore, the displacement of the spring is 1 m.

Learn more about Hooke's law, here:

https://brainly.com/question/13348278

#SPJ2

Answer:

The power of the eye is 51.64 diopters

Explanation:

The power of the eye is given by;

[tex]P = \frac{1}{f} = \frac{1}{d_o} +\frac{1}{d_i}[/tex]

where;

P is the power of the eye in diopter

f is the focal length of the eye

[tex]d_o[/tex] is the distance between the eye and the object

[tex]d_i[/tex] is the distance between the eye and the image

Given;

[tex]d_o[/tex] = 61.0 cm = 0.61 m

[tex]d_i[/tex] = 2.0 cm = 0.02 m

[tex]P = \frac{1}{d_o} +\frac{1}{d_i} \\\\P = \frac{1}{0.61} + \frac{1}{0.02} \\\\P = 51.64 \ D[/tex]

Therefore, the power of the eye is 51.64 diopters.

The power P of the eye when viewing an object 61.0 cm away is 51.639D

The power of a lens is a reciprocal of its focal length and it is expressed as:

[tex]P=\frac{1}{f}[/tex]

According to the mirror formula

[tex]\frac{1}{f} =\frac{1}{d_i} +\frac{1}{d_0}[/tex]

where

[tex]d_i[/tex] is the distance from the lens to the image = 61.0cm = 0.61m

[tex]d_0[/tex] is the distance from the lens to the object = 2.00cm = 0.02m

[tex]P=\frac{1}{f} =\frac{1}{0.02} +\frac{1}{0.61}\\P=50+1.639\\P=51.639D[/tex]

Hence the power P of the eye when viewing an object 61.0 cm away is 51.639D

Learn more here: https://brainly.com/question/14870552