A pump lifts 400 kg of water per hour a height of 4.5 m .
Part A
What is the minimum necessary power output rating of the water pump in watts?
Express your answer using two significant figures.
Part B
What is the minimum necessary power output rating of the water pump in horsepower?
Express your answer using two significant figures.

Answers

Answer 1

Answer:

Power = Work / Time

P = 400 kg * 9.8 m/s * 4.5 m / 3600 sec = 4.9 J/s = 4.9 Watts

Also, 4.9 Watts / (746 Watts / Horsepower) = .0066 Hp


Related Questions

An object is 2.0 cm from a double convex lens with a focal length of 1.5 cm. Calculate the image distance

Answers

Answer:

0.857 cm

Explanation:

We are given that:

The focal length for a convex lens to be (f) = 1.5cm

The object distance (u) = - 2.0 cm

We are to determine the image distance (v) = ??? cm

By applying the lens formula:

[tex]\dfrac{1}{f} = \dfrac{1}{u}+\dfrac{1}{v}[/tex]

By rearrangement and making (v) the subject of the above formula:

[tex]v = \dfrac{uf}{u-f}[/tex]

replacing the given values:

[tex]v = \dfrac{(-2.0)(1.5)}{(-2.0 -1.5)}[/tex]

[tex]v = \dfrac{-3.0}{(-3.5)}[/tex]

v = 0.857 cm

An audience of 2250 fills a concert hall of volume 32000 m^3. If there were no ventilation, by how much would the temperature of the air rise over a period of 2.0 h due to the metabolism of the people (70 W/person)?

Answers

246 and 64 minutes later




A student claimed that thermometers are useless because a
thermometer always registers its own temperature. How would you
respond?
[

Answers

the thermometer is the temperature that is around it so its registering the temperature its supposed to

Can you think of reasons why the charge on each ball decreases over time and where the charges might go

Answers

Answer:

By the principle of corona discharge.

Explanation:

The charge on each ball will decreases over time due to the electrical discharge in air.

According to the principle of corona discharge, when the curvature is small, the discharge of the charge takes placed form the pointed ends.

a vechile having a mass of 500kg is moving with a speed of 10m/s.Sand is dropped into it at the rate of 10kg/min.What force is needed to keep the vechile moving with uniform speed​

Answers

Answer:

1.67 N

Explanation:

Applying,

F = u(dm/dt)+m(du/dt)................ Equation 1

Where F = force, m = mass of the vehicle, u = speed.

Since u is constant,

Therefore, du/dt = 0

F = u(dm/dt)............... Equation 2

From the question,

Given: u = 10 m/s, dm/dt = 10 kg/min = (10/60) kg/s

Substitute these values into equation 2

F = 10(10/60)

F = 100/60

F = 1.67 N

A tire is filled with air at 22oC to a gauge pressure of 240 kPa. After driving for some time, if the temperature of air inside the tire is 45oC, what fraction of the original volume of air must be removed to maintain the pressure at 240 kPa?

Answers

Answer:

7.8% of the original volume.

Explanation:

From the given information:

Temperature [tex]T_1[/tex] = 22° C = 273 + 22 = 295° C

Pressure [tex]P_1[/tex] = 240 kPa

Temperature [tex]T_2[/tex] = 45° C

At initial temperature and pressure:

Using the ideal gas equation:

[tex]P_1V_1 =nRT_1[/tex]

making V_1 (initial volume) the subject:

[tex]V_1 = \dfrac{nRT_1}{P_1}[/tex]

[tex]V_1 = \dfrac{nR*295}{240}[/tex]

Provided the pressure maintained its rate at 240 kPa, when the temperature reached 45° C, then:

the final volume [tex]V_2[/tex] can be computed as:

[tex]V_2 = \dfrac{nR*318}{240}[/tex]

Now, the change in the volume ΔV =  V₂ - V₁

[tex]\Delta V = \dfrac{nR*318}{240}- \dfrac{nR*295}{240}[/tex]

[tex]\Delta V = \dfrac{23nR}{240}[/tex]

The required fraction of the volume of air to keep up the pressure at (240) kPa can be computed as:

[tex]= \dfrac{\dfrac{23nR}{240}}{ \dfrac{295nR}{240}}[/tex]

[tex]= {\dfrac{23nR}{240}} \times { \dfrac{240}{295nR}}[/tex]

[tex]= 0.078[/tex]

= 7.8% of the original volume.

A mass attached to the end of a spring is oscillating with a period of 2.25 s on a horizontal frictionless surface. The mass was released from rest at
t = 0
from the position
x = 0.0480 m.
Determine the location of the mass at
t = 5.85 s?

Answers

Answer:

[tex]X=0.0389m[/tex]

Explanation:

From the question we are told that:

Period of spring [tex]T_s=2.25s[/tex]

Initial Position of Mass [tex]x=0.0480m[/tex]

Final Mass period [tex]T_f=5.85s[/tex]

Generally the equation for the Mass location is mathematically given by

[tex]X=xcos*\frac{2\pi T_s}{T_f}[/tex]

[tex]X=0.048*cos*\frac{2\pi 5.85}{2.25}[/tex]

[tex]X=0.0389m[/tex]

A 0.20 mass on a horizontal spring is pulled back a certain distance and released. The maximum speed of the mass is measured to be 0.20 . If, instead, a 0.40 mass were used in this same experiment, choose the correct value for the maximum speed.
a. 0.40 m/s.
b. 0.20 m/s.
c. 0.28 m/s.
d. 0.14 m/s.
e. 0.10 m/s.

Answers

Answer:

d

Explanation:

Ya gon find the Kenitic Energy first

K=½mv²===> K=½×0.2×(0.2)²===> 0.1(0.04)===> 0.004

and now the replacement:

0.004=½×0.4V²====> v²=0.02===> V=0.14m/s

An inductor of inductance 0.02H and capacitor of capatance 2uF are connected in series to an a.c. source of frequency 200 Hz- Calculate the Impedance in the circuit . TC​

Answers

Explanation:

Given:

L = 0.02 H

C = [tex]2\:\mu \text{F}[/tex]

f = 200 Hz

The general form of the impedance Z is given by

[tex]Z = \sqrt{R^2 + (X_L - X_C)^2}[/tex]

Since this is a purely inductive/capacitive circuit, R = 0 so Z reduces to

[tex]Z = \sqrt{(X_L - X_C)^2} = \sqrt{\left(\omega L - \dfrac{1}{\omega C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left(2 \pi L - \dfrac{1}{2 \pi f C} \right)^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{\left[2 \pi (200\:\text{Hz})(0.02\:\text{H}) - \dfrac{1}{2 \pi (200\:\text{Hz})(2×10^{-6}\:\text{F})} \right]^2}[/tex]

[tex]\:\:\:\:\:\:\:= \sqrt{(25.13\:\text{ohms} - 397.89\:\text{ohms})^2}[/tex]

[tex]\:\:\:\:\:\:\:=372.66\:\text{ohms}[/tex]

A tank is full of water. Find the work (in J) required to pump the water out of the spout. (Use 9.8 m/s2 for g. Use 1,000 kg/m3 as the density of water. Round your answer to the nearest whole number.)

Answers

6 m in 26,000 26 m in 27

Question: A NEO distance from the Sun is 1.17 AU. What is the speed of the NEO (round your answer to 2 decimal places)

Answers

Answer:

  v = 2.75 10⁴ m / s

Explanation:

For this exercise we must use Kepler's third law which is an application of Newton's second law to the solar system

            F = ma

where force is the force of gravity

            F = [tex]G \frac{m M}{r^2}[/tex]

acceleration is centripetal

             a = [tex]\frac{v^2}{r}[/tex]

we substitute

           G m M / r² = m v² / r

           [tex]\frac{GM}{r}[/tex] = v²

           v = [tex]\sqrt{GM/r}[/tex]

indicate that the radius of the orbit is r = 1.17 AU, let's reduce to the SI system

            r = 1.17 AU (1.496 10¹¹ m / 1 AI) = 1.76 10¹¹ m

let's calculate

         v = [tex]\sqrt{\frac{6.67 \ 10^{-11} 1.991 \ 10^{30} }{ 1.76 \ 10^{11}} }[/tex]Ra (6.67 10-11 1.991 10 30 / 1.76 10 11

         v = [tex]\sqrt{7.5454 \ 10^8 }[/tex]ra 7.5454 10 8

         v = 2.75 10⁴ m / s

Part of your electrical load is a 60-W light that is on continuously. By what percentage can your energy consumption be reduced by turning this light off

Answers

Answer:

Following are the solution to the given question:

Explanation:

Please find the complete question in the attached file.

The cost after 30 days is 60 dollars. As energy remains constant, the cost per hour over 30 days will be decreased.

[tex]\to \frac{\$60}{\frac{30 \ days}{24\ hours}} = \$0.08 / kwh.[/tex]

Thus, [tex]\frac{\$0.08}{\$0.12} = 0.694 \ kW \times 0.694 \ kW \times 1000 = 694 \ W.[/tex]

The electricity used is continuously 694W over 30 days.

If just resistor loads (no reagents) were assumed,

[tex]\to I = \frac{P}{V}= \frac{694\ W}{120\ V} = 5.78\ A[/tex]

Energy usage reduction percentage = [tex](\frac{60\ W}{694\ W} \times 100\%)[/tex]

This bulb accounts for [tex]8.64\%[/tex] of the energy used, hence it saves when you switch it off.

Cold air rises because it is denser than water, is this true?​

Answers

Answer:

true

Explanation:

im not sure please dont attack me

No,hot air rises cold air sinks

If one lawn mower causes an 80-dB sound level at a point nearby, four lawnmowers together would cause a sound level of ____________ at that point. a.92 dB b.84 dB c.86 dB d.none of the above

Answers

Answer:

The intensity of 4 lawn movers is 86 dB.

Explanation:

Intensity of one lawnmower = 80 dB

Let the intensity is I.

Use the formula of intensity

[tex]dB = 10 log\left ( \frac{I}{Io} \right )\\\\80=10log\left ( \frac{I}{Io} \right )\\\\10^8 = \frac{I}{10^{-12}}\\\\I = 10^{-4} W/m^2[/tex]

Now the intensity of 4 lawn movers is

[tex]dB = 10 log\left ( \frac{4I}{Io} \right )\\\\dB=10log\left ( \frac{4\times10^{-4}}{10^{-12}} \right )\\\\dB = 86 dB\\[/tex]

A submarine has a "crush depth" (that is, the depth at which
water pressure will crush the submarine) of 400 m. What is
the approximate pressure (water plus atmospheric) at this
depth? (Recall that the density of seawater is 1025 kg/m3, g=
9.81 m/s2, and 1 kg/(m-s2) = 1 Pa = 9.8692 x 10-6 atm.)

Answers

Answer:

P =40.69 atm

Explanation:

We need to find the approximate pressure at a depth of 400 m.

It can be calculated as follows :

P = Patm + ρgh

Put all the values,

[tex]P=1\ atm+1025 \times 9.81\times 400\times 9.8692\times 10^{-6}\ atm/Pa\\\\P=40.69\ atm[/tex]

So, the approximate pressure is equal to 40.69 atm.

when blueshift occurs,the preceived frequency of the wave would be?​

Answers

Answer:

When blueshift happens, the perceived frequency of the wave would be higher than the actual frequency.

Explanation:

As the name suggests, when blueshift happens to electromagnetic waves, the frequency of the observed wave would shift towards the blue (high-frequency) end of the visible spectrum. Hence, there would be an increase to the apparent frequency of the wave.

Blueshifts happens when the source of the wave and the observer are moving closer towards one another.

Assume that the wave is of frequency [tex]f\; {\rm Hz}[/tex] at the source. In other words, the source of the wave sends out a peak after every [tex](1/f)\; {\text{seconds}}[/tex].

Assume that the distance between the observer and the source of the wave is fixed. It would then take a fixed amount of time for each peak from the source to reach the observer.

The source of this wave sends out a peak after each period of [tex](1/f)\; {\text{seconds}}[/tex]. It would appear to the observer that consecutive peaks arrive every [tex](1/f)\; {\text{seconds}}\![/tex]. That would correspond to a frequency of [tex]f\; {\rm Hz}[/tex].

On the other hand, for a blueshift to be observed, the source of the wave needs to move towards the observer. Assume that the two are moving towards one another at a constant speed of [tex]v \; {\rm m \cdot s^{-1}}[/tex].

Again, the source of this wave would send out a peak after each period of [tex](1/f)\; {\text{seconds}}[/tex]. However, by the time the source sends out the second peak, the source would have been [tex]v \cdot (1 / f) \; { \rm m}= (v / f)\; {\rm m}[/tex] closer to the observer then when the source sent out the first peak.

When compared to the first peak, the second peak would need to travel a slightly shorter distance before it reach the observer. Hence, from the perspective of the observer, the time difference between the first and the second peak would be shorter than [tex](1/f)\; {\text{seconds}}[/tex]. The observed frequency of this wave would be larger than the original [tex]f\; {\rm Hz}[/tex].

Solids diffuse because the particles cannot move.
A. Can
B. Not enough info
C. Cannot
D. Sometimes will

Answers

Solids cannot diffuse.

Answer: C. Cannot
They don’t space to move.

Hi can someon help me how to answer this?
Btw I'm from Philippines

Answers

Answer:

Test 1

1.True

2.True

3.True

4.False

5.True

6.True

7.False

8.True

9.True

10.True

yung iba nasa pic

Light with a wavelength of 5.0 · 10-7 m strikes a surface that requires 2.0 ev to eject an electron. Calculate the energy, in joules, of one incident photon at this frequency. _____ joules 4.0 x 10 -19 4.0 x 10 -49 9.9 x 10 -32 1.1 x 10 -48

Answers

Answer:

pretty sure its 6.2 x 10^-13

Explanation:

I looked it up I'm not a bigbrain but want to help

a. What do you mean by chromatic aberration in lenses?

Answers

Chromatic aberration is a phenomenon in which light rays passing through a lens focus at different points, depending on their wavelength. ... the same area of the photo after post-production removal of the chromatic aberration using a software tool.

A car is moving at a speed of 60 mi/hr (88 ft/sec) on a straight road when the driver steps on the brake pedal and begins decelerating at a constant rate of 10ft/s2 for 3 seconds. How far did the car go during this 3 second interval?

Answers

Answer:

219 ft

Explanation:

Here we can define the value t = 0s as the moment when the car starts decelerating.

At this point, the acceleration of the car is given by the equation:

A(t) = -10 ft/s^2

Where the negative sign is because the car is decelerating.

To get the velocity equation of the car, we integrate over time, to get:

V(t) = (-10 ft/s^2)*t + V0

Where V0 is the initial velocity of the car, we know that this is 88 ft/s

Then the velocity equation is:

V(t) = (-10 ft/s^2)*t + 88ft/s

To get the position equation we need to integrate again, this time we get:

P(t) = (1/2)*(-10 ft/s^2)*t^2 + (88ft/s)*t + P0

Where P0 is the initial position of the car, we do not know this, but it does not matter for now.

We want to find the total distance that the car traveled in a 3 seconds interval.

This will be equal to the difference in the position at t = 3s and the position at t = 0s

distance = P(3s) - P(0s)

 = ( (1/2)*(-10 ft/s^2)*(3s)^2+ (88ft/s)*3s + P0) - ( (1/2)*(-10 ft/s^2)*(0s)^2 + (88ft/s)*0s + P0)

=  ( (1/2)*(-10 ft/s^2)*9s^2+ (88ft/s)*3s + P0) - ( P0)

=  (1/2)*(-10 ft/s^2)*9s^2+ (88ft/s)*3s = 219ft

The car advanced a distance of 219 ft in the 3 seconds interval.

g As they reach higher temperatures, most semiconductors... Selected Answer: have an increased resistance. Answers: have a constant resistance. have an increased resistance. have a decreased resistance.

Answers

Answer:

have an increased resistance

A 1.64 kg mass on a spring oscillates horizontal frictionless surface. The motion of the mass is described by the equation: X = 0.33cos(3.17t). In the equation, x is measured in meters and t in seconds. What is the maximum energy stored in the spring during an oscillation?

Answers

Answer:

[tex]K.E_{max}=0.8973J[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=1.64kg[/tex]

Equation of Mass

[tex]X=0.33cos(3.17t)[/tex]...1

Generally equation for distance X is

[tex]X=Acos(\omega t)[/tex]...2

Therefore comparing equation

Angular Velocity [tex]\omega=3.17rad/s[/tex]

Amplitude A=0.33

Generally the equation for Max speed is mathematically given by

[tex]V_{max}=A\omega[/tex]

[tex]V_{max}=0.33*3.17[/tex]

[tex]V_{max}=1.0461m/s[/tex]

Therefore

[tex]K.E_{max}=0.5mv^2[/tex]

[tex]K.E_{max}=0.5*1.64*(1.0461)^2[/tex]

[tex]K.E_{max}=0.8973J[/tex]

4. Consider a 1 kg block is on a 45° slope of ice. It is connected to a 0.4 kg block by a cable
and pulley. Does the 1 kg block move or down the slope? What is the net force on it and
its acceleration? (8 pts)

Answers

If an icy surface means no friction, then Newton's second law tells us the net forces on either block are

• m = 1 kg:

F (parallel) = mg sin(45°) - T = ma … … … [1]

F (perpendicular) = n - mg cos(45°) = 0

Notice that we're taking down-the-slope to be positive direction parallel to the surface.

• m = 0.4 kg:

F (vertical) = T - mg = ma … … … [2]

Adding equations [1] and [2] eliminates T, so that

((1 kg) g sin(45°) - T ) + (T - (0.4 kg) g) = (1 kg + 0.4 kg) a

(1 kg) g sin(45°) - (0.4 kg) g = (1.4 kg) a

==>   a ≈ 2.15 m/s²

The fact that a is positive indicates that the 1-kg block is moving down the slope. We already found the acceleration is a ≈ 2.15 m/s², which means the net force on the block would be ∑ F = ma ≈ (1 kg) (2.15 m/s²) = 2.15 N directed down the slope.

Topic: Chapter 10: Projectory or trajectile?
Projectile range analysis:
A projectile is launched from the ground at 10 m/s, at
an angle of 15° above the horizontal and lands 5.1 m away.
What other angle could the projectile be launched at, with the same velocity,
and land 5.1 m away?

90°
75°
45
50°
30°

Answers

Answer:

The other angle is 75⁰

Explanation:

Given;

velocity of the projectile, v = 10 m/s

range of the projectile, R = 5.1 m

angle of projection, 15⁰

The range of a projectile is given as;

[tex]R = \frac{u^2sin(2\theta)}{g}[/tex]

To find another angle of projection to give the same range;

[tex]5.1 = \frac{10^2 sin(2\theta)}{9.81} \\\\100sin(2\theta) = 50\\\\sin(2\theta) = 0.5\\\\2\theta = sin^{-1}(0.5)\\\\2\theta = 30^0\\\\\theta = 15^0\\\\since \ the \ angle \ occurs \ in \ \ the \ first \ quadrant,\ the \ equivalent \ angle \\ is \ calculated \ as;\\\\90- \theta = 15^0\\\\\theta = 90 - 15^0\\\\\theta = 75^0[/tex]

Check:

sin(2θ) = sin(2 x 75) = sin(150) = 0.5

sin(2θ) = sin(2 x 15) = sin(30) = 0.5

A typical incandescent light bulb consumes 75 W of power and has a mass of 20 g. You want to save electrical energy by dropping the bulb from a height great enough so that the kinetic energy of the bulb when it reaches the floor will be the same as the energy it took to keep the bulb on for 2.0 hours. From what height should you drop the bulb, assuming no air resistance and constant g?

Answers

Answer:

h = 2755102 m = 2755.102 km

Explanation:

According to the given condition:

Potential Energy = Energy Consumed by Bulb

[tex]mgh = Pt\\\\h = \frac{Pt}{mg}[/tex]

where,

h = height = ?

P = Power of bulb = 75 W

t = time = (2 h)(3600 s/1 h) = 7200 s

m = mass of bulb = 20 g = 0.02 kg

g = acceleration due to gravity = 9.8 m/s²

Therefore,

[tex]h = \frac{(75\ W)(7200\ s)}{(0.02\ kg)(9.8\ m/s^2)}[/tex]

h = 2755102 m = 2755.102 km

Notice that all the initial spring potential energy was transformed into gravitational potential energy. If you compressed the spring to a distance of 0.200 mm , how far up the slope will an identical ice cube travel before reversing directions

Answers

Answer:

The correct answer will bs "2.41 m".

Explanation:

According to the question,

M = 50 g

or,

   = 0.050 kg

[tex]\Theta = 25^{\circ}[/tex]

k = 25.9 N/m

Δx = 0.200 m

Let the traveled distance be "x".

By using trigonometry, the height will be:

⇒ [tex]h = l Sin \Theta[/tex]

hence,

⇒ [tex]Potential \ energy \ at \ the \ top=Spring \ potential \ energy[/tex]

                                       [tex]Mgh=\frac{1}{2} k(\Delta x)^2[/tex]

By putting the values, we get

             [tex]0.050\times 9.8\times lSin 25^{\circ}=\frac{1}{2}\times 25.0\times (0.200)^2[/tex]

                                              [tex]l=2.41 \ m[/tex]      

Differences between angle of twist and angle of shear

Answers

Answer:

idek

Explanation:

1. Which one of the following is not an organic compound? Why? CH4 C2H6O CaO
2. Fill in the chart below to identify and describe the functional groups associated with organic chemistry. Name General Structure Properties/Uses Alcohol Aldehyde Ketone Fatty acid Ether
3. Explain why carbon is called “the backbone” molecule of organic chemistry and why organic molecules couldn't easily be based on H or O instead.

Answers

Answer:

1. CaO is not an organic compound because it doesn’t contain a carbon molecule.

2.

Name General Structure Properties/Uses

Alcohol R-OH (contains a hydroxyl group)  Can be poisonous, can be made from fermentation or distillation

Aldehyde R-COH (contains a carbon atom double-bonded to an oxygen and single-bonded to a hydrogen)  Makes up formaldehyde and acetaldehyde

Ketone R-CO-R (contains a carbon atom double-bonded to an oxygen atom and then connected to carbon chains through the other two single bonds)   Makes up acetone

Fatty acid R-COOH (contains a carbon atom double-bonded to an oxygen atom, single-bonded to a hydroxyl, and single-bonded to the carbon chain) Makes up fatty acids like acetic acid and stearic acid; used to form esters

Ether R-O-R (contains double carbon chains connected to an oxygen atom through single bonds)   Ethyl ether is very volatile and flammable, used in veterinary medicine

3. Carbon is able to make four covalent bonds with other elements. This gives it a lot of diversity and the ability to form differently shaped molecules that perform specific functions or fit specific cell receptors in the body. H can form only one bond, and oxygen forms only two bonds, so they don't have as much potential to form a good starting point for organic molecules.

Explanation:

pf

CaO is not an organic compound because it doesn’t contain a carbon molecule.

Name General Structure Properties/Uses

(which contains a hydroxyl group)  Can be poisonous, can be made from fermentation or distillation

Aldehyde R-COH (contains a carbon atom double-bonded to oxygen and single-bonded to hydrogen)  Makes up formaldehyde and acetaldehyde

Ketone R-CO-1R (contains a carbon atom double-bonded to an oxygen atom and then connected to carbon chains through the other two single bonds)   Makes up acetone

Fatty acid R-COOH (contains a carbon atom double-bonded to an oxygen atom, single-bonded to a hydroxyl, and single-bonded to the carbon chain) Makes up fatty acids like acetic acid and stearic acid; used to form esters11

Ether -O-R (contains double carbon chains connected to an oxygen atom through single bonds)   Ethyl ether is very volatile and flammable, used in veterinary medicine

Carbon can make four covalent bonds with other elements. This gives it a lot of diversity and the ability to form differently shaped molecules that perform specific functions or fit specific cell receptors in the body. H can form only one bond, and oxygen forms only two bonds, so they don't have as much potential to form a good starting point for organic molecules.

Learn more about organic molecules.

https://brainly.com/question/24225576

#SPJ2

When a golfer tees off, the head of her golf club which has a mass of 158 g is traveling 48.2 m/s just before it strikes a 46.0 g golf ball at rest on a tee. Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s. Neglect the mass of the club handle and determine the speed of the golf ball just after impact.

Answers

Answer:

v₂ = 53.23 m/s

Explanation:

Given that,

The mass of a golf club, m₁ = 158 g = 0.158 kg

The initial speed of a golf club, u₁  =  48.2 m/s

The mass of a golf ball, m₂ = 46 g = 0.046 kg

It was at rest, u₂ = 0

Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s, v₁ = 32.7 m/s

We use the conservation of energy to find the speed of the golf ball just after impact as follows :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.158(48.2)-0.158(32.7)}{0.046}\\\\=53.23\ m/s[/tex]

So, the speed of the golf ball just after the impact is equal to 53.23 m/s.

Other Questions
If a person uses up his or her reserve supply of glycogen and still does not eat, the body will break down ____ to provide glucose for the brain. Just after they taste a sweet liquid, mice are injected with a drug that produces an immune response. Later, the taste of the sweet liquid by itself triggers an immune response. This best illustrates Bella Bags is a British company that sells luxury leather purses manufactured in London. Currently, its products are carried at high-end department stores all across Europe. The company prides itself on its exceptional customer service. However, the company has been criticized in the past for carrying only two designs of bags. There is currently growing market demand for high-end luxury accessories. Bella Bags faces fierce competition from established luxury brands. Which of the following best characterizes an actionable strategy for Bella Bags that works on reducing the company's weaknesses to avoid threats? A) Reduce the threat of high competition by expanding the product line and offering more variety B) Promote the company's exceptional customer service to leverage the increasing demand for luxury goods C) Reduce the threat of high competition by promoting the company's narrow product offering D) Reduce the threat of high competition by leveraging the increasing demand for luxury goods please help asap ano ang kailangang disenyo ang maaaring ilagay natin para mapaganda ang gagawing kalendaryo please Typical cash inflows of a capital investment project include all of the following EXCEPT: A. projected incremental revenues from the project. B. cost reductions in operating costs. C. the salvage value of the investment at the end of its useful life. D. tax savings generated by depreciation expense. E. the original cost paid for the capital investment. 12.Beth has a new car, she no longer takes the commuter train to work. She drivesto work every day.A. Now thatB. WhileC. AlthoughD. In case What is the fraction for the following decimal expansion? 0.16OA. 1/6OB. 2/25OC. 1/3OD. 4/25 What is the cause of acid precipitation?1) ozone2) nitrogenous oxides3) ammonia4) chlorofluorocarbons (CFCs) According to the census of 1790, how many enslaved people of African ancestry lived in the colonies? In a survey of 302 registered voters, 167 of them wished to see Mayor Waffleskate lose her next election. Find a point estimate for the proportion of registered voters who wish to see Mayor Waffleskate defeated. someone help me please with this algebra problem David is driving a steady 30 m/s when he passes Tina, who is sitting in her car at rest. Tina begins to accelerate at a steady 2.0 m/s2 at the instant when David passes. How far does Tina drive before passing David? what do you mean by medical personnel ? give some examples and explain about it HELP PLEASSSSSS I will give brainlyest!!!!!!!!!!!!!!!!!! Ayayai Corp. reported net income of $87300 for the year. During the year, accounts receivable increased by $5820, accounts payable decreased by $3880 and depreciation expense of $9700 was recorded. Net cash provided by operating activities for the year is AFluids in which the shear stress must reachcertain minimum value(yield stress)before flow commences are called In order to win a prize, Heather randomly draws two balls from a basket of 40. There are 25 blue balls, and the rest are green balls. Of the blue balls, 12% are winning balls. Of the green balls, 20% are winning balls. Calculate the expected number of winning balls that Heather draws. The angular momentum quantum number (l) value of 0 indicates the ________ subshell. lgebra 1 solve -2 + 11(17y + 15) 1. A block of mass m = 10.0 kg is released with a speed v from a frictionless incline at height 7.00 m. Theblock reaches the horizontal ground and then slides up another frictionless incline as shown in Fig. 1.1. If thehorizontal surface is also frictionless and the maximum height that the block can slide up to is 26.0 m, (a) whatis the speed v of the block equal to when it is released and (b) what is the speed of the block when it reachesthe horizontal ground? If a portion of length 1 2.00 m on the horizontal surface is frictional with coefficientof kinetic friction uk = 0.500 (Fig. 1.2) and the block is released at the same height 7.00 m with the samespeed v determined in (a), (c) what is the maximum height that the block can reach, (d) what is the speed of theblock at half of the maximum height, and (e) how many times will the block cross the frictional region beforeit stops completely?1 = 2.00 m (frictional region)