A __________ pollutant interacts with a part of the atmosphere and becomes a __________ pollutant.primary; secondarysecondary ; primary

The weightlifter did 12.5 joules of work lifting the weights over his head.

The weightlifter's work is calculated as the product of the force and the distance moved in the force's direction. When a weightlifter exerts a force of 25 newtons across a distance of 0.5 meters, the following work is accomplished:

W = F × d = 25 N × 0.5 m = 12.5 Joules

Therefore, the weightlifter did 12.5 joules of work lifting the weights over his head.

A physical quantity called force defines the interaction of two systems or objects. In the SI system, it is expressed as the push or pull that one item applies to another and is measured in units of Newtons (N).

An object can accelerate, alter direction, or deform as a result of force. The acceleration of an object is directly proportional to the force that is applied to it and inversely proportional to its mass, according to Newton's second law of motion.

learn more about newtons here

https://brainly.com/question/14222453

#SPJ1

Water slows down neutrons that are leaving nuclear processes quickly. As the water warms up, steam is produced. Electricity is generated by the turbine that the steam turns.

learn more about electricity here

https://brainly.com/question/776932

#SPJ1

Answer:

A telephone pole casts a clear shadow in the light from a distant head lamp of a car, but no such effect is noticed for the sound from the car horn. Why? Answer: The sound and light both are waves. But the wavelength of sound waves is very large as compared to the wavelength of light waves.

Explanation:

if it helped you please mark me a brainliest :)))

The rock will be 12 meters from the ground level after it has been thrown upward with a velocity of 12 meters per second from the top of the 42 meter high cliff for a total of 3.5 seconds.

The cliff is the height that generally has the highest height and it can be mountains, stones, buildings.

This is because the total time taken for the rock to fall back down will be the same as the total time taken for the rock to reach the top of the cliff. The equation used to calculate this is: time = distance / velocity. Therefore:

Time = 42 meters (cliff height) / 12 meters per second (velocity) = 3.5 seconds.

So, the rock will be 12 meters from the ground level after 3.5 seconds.

Read more about cliff here:

https://brainly.com/question/22789028

#SPJ11

a) Light traverses approximately 9.461 × 10^12 kilometers in 1 light-year

.b) The speed of light in terms of ly per year is 1 ly/y.c) 1 light-year equals 5.8785 × 10^12 miles. 1 mile is equal to 5,280 feet.

Therefore, 1 light-year is equal to 31.0688 × 10^12 feet. A nanosecond is equal to one billionth of a second (1/1,000,000,000 second). Therefore, 1 second is equal to 1 × 10^9 nanoseconds. Speed is equal to distance divided by time.

Therefore, Speed of light in feet per nanosecond = (31.0688 × 10^12 feet) / (1 year × 365 days/year × 24 hours/day × 3600 seconds/hour × 1 × 10^9 nanoseconds/second) = 1.005 × 10^5 feet per nanosecond (approximately).

for such more questions on speed of light

https://brainly.com/question/100983

#SPJ11

Answer:

To make it around the circle, the tension in the string must provide the necessary centripetal force to keep the ball moving in a circle. At the top of the circle, the tension in the string must provide all the force to keep the ball moving in a circle. At the bottom of the circle, the tension in the string must provide the centripetal force in addition to the force of gravity.

We can use the centripetal force formula to solve for the minimum velocity: F_c = m * a_c

where F_c is the centripetal force, m is the mass of the ball, and a_c is the centripetal acceleration.

At the top of the circle, the centripetal force is equal to the tension in the string: F_c = T

where T is the tension in the string.

At the bottom of the circle, the centripetal force is equal to the sum of the tension in the string and the force of gravity:

F_c = T + mg

where m is the mass of the ball, g is the acceleration due to gravity (9.8 m/s^2), and T is the tension in the string.

The centripetal acceleration is given by: a_c = v^2 / r

where v is the velocity of the ball and r is the radius of the circle.

Since the circle has a radius of 0.33 m, we can substitute this into the equation for a_c: a_c = v^2 / 0.33

Combining these equations, we get:

At the top of the circle: T = m * v^2 / 0.33

At the bottom of the circle: T + mg = m * v^2 / 0.33

We can solve for the minimum velocity by using these two equations to eliminate the tension in the string: m * v^2 / 0.33 + mg = m * v^2 / 0.33

Simplifying this equation, we get: v = sqrt(0.33 * g)

Plugging in the values, we get: v = sqrt(0.33 * 9.8) = 1.81 m/s

Therefore, the minimum velocity that the ball must have to make it around the circle is 1.81 m/s

The question asks how much current flows through the pipe when 600 ping pong balls with 6.00 microC of charge each are injected into the pipe and drift from the high-pressure end to the low-pressure end at a speed of 2.00 cm/s.

Using the formula for current (I = Q/t), where I is current, Q is charge, and t is time,

we can determine the current flowing through the pipe.

First, we need to determine the total charge by multiplying 600 balls by 6.00 microC/ball, yielding 3600 μC.

Next, determine the time by dividing the distance (10.0 m) by the speed (2.00 cm/s) to get 500 s. Lastly, current is the charge per unit time, so divide 3600 μC/500s to get 7.2 microamps.

Therefore, the amount of electric current flowing through the pipe is 7.2 microamps.

To learn more about current refer to: https://brainly.com/question/25922783

#SPJ11

Option (B) longer time to stop, is the correct answer.The reason for wine glasses not breaking when they fall on a carpeted floor, compared to falling on a wooden floor, is due to the longer time to stop.

Impulse is a measure of the change in momentum that an object experiences when subjected to an impact force. The impulse in stopping is not the reason wine glasses may not break when they fall to a carpeted floor.Wine glasses are fragile, and when they hit a hard surface, they are likely to break. Wine glasses may not break when they fall on a carpeted floor because the carpet is soft and has a low elastic modulus.

The carpet is capable of absorbing some of the impact's energy, reducing the amount of energy that the wine glass receives. Because the carpet has a low elastic modulus, it takes longer for the wine glass to come to a stop, reducing the force that the glass experiences when it hits the ground. When a wine glass falls on a hard surface such as a wooden floor, the glass comes to a stop more quickly, meaning that the stopping time is less, and the force of impact is higher, making it more likely to break.

More on impulse: https://brainly.com/question/20910030

#SPJ11

Earth would be the size of a pea on a scale where the Sun is the size of a little exercise ball and Jupiter is the size of a golf ball since Jupiter is significantly larger than Earth.

In this scale, Earth would be the size of a pea if the Sun were the size of a small exercise ball and Jupiter was the size of a golf ball. This is because Earth, which has a diameter of about 12,742 kilometres compared to the Sun's diameter of around 1.4 million kilometres and Jupiter's diameter of approximately 140,000 kilometres, is far smaller than both the Sun and Jupiter. Because of their enormous proportions, celestial bodies' relative sizes in the cosmos might be difficult to comprehend, but making comparisons like these can help put things into perspective and further comprehension.

learn more about sun size here:

https://brainly.com/question/28666069

#SPJ4

In the heliocentric model of the solar system, one planet passing another in its orbit gives rise to gravitational forces.

It can also lead to an alteration in the planets' orbits. This is due to the gravitational forces produced by the interaction between the planets. A heliocentric model is a model of the solar system in which the sun is at the center and the planets orbit it. This model was first proposed by Nicolaus Copernicus, a Polish astronomer in the 16th century. He proposed this model after observing that it better explained the motions of the planets than the previous geocentric model, in which Earth was at the center and everything else revolved around it. An orbit gives rise to the gravitational force that causes a planet to continue to travel in a circle around the sun. It is also responsible for the gravitational pull between planets, which affects their orbits. A planet passing another planet in its orbit can also cause some gravitational perturbations in its orbit. This can lead to an alteration in the planets' orbits or cause their orbits to change slightly over time. The heliocentric model is currently the widely accepted theory of how our solar system is arranged. It states that the planets orbit the sun, which is a massive ball of hot gas at the center of the solar system. The sun's gravity is what keeps the planets in their orbits.

Learn more about the heliocentric model  at brainly.com/question/19757858

#SPJ4

The number of degrees of freedom of a vibrating system depends on the number of coordinates used to describe the position of each mass. Thus, the correct option is (B).

Degrees of freedom can be explained as the number of independent ways in which a system can move. In general, a vibrating system has several degrees of freedom. For instance, a system with N particles moving in three dimensions will have 3N degrees of freedom.

The degrees of freedom of a vibrating system depend on the number of coordinates used to describe the position of each mass. Therefore, the answer is option (B). The formula to calculate the degrees of freedom in a system with N particles is:

df = 3N - C

Where

df is the number of degrees of freedom and

C is the number of constraints.

Learn more about degree of freedom here: https://brainly.com/question/28527491

#SPJ11

The position d of the 6-kn load such that the average normal stress in both rods supporting the beam is the same is 111.5 mm.

First we derive the formula for average normal stress.σaverage = Force/Area

σaverage = P/A .Take 1 as the cross-sectional area of rod ab and find the force it's bearing.Force on rod ab will be equal to the weight of the beam acting downwards + the weight of the 6-kn load acting downwards.

Force = 4×10^4 N + 6×10³ N

Force = 46×10³ N

Now substitute the values in the formula.σ average 1 = P/A

σ average 1 = (46×10²)/(12×10^-6)

σ average 1 = 3.83×10^9 Pa

Now take 2 as the cross-sectional area of rod cd and find the force it's bearing.Force on rod cd will be equal to the weight of the 6-kn load acting downwards.Force = 6×10³ N

Now substitute the values in the formula.σ average 2 = P/A

σ average 2 = (6×10³)/(8×10^-6)

σ average 2 = 0.75×10^9 Pa

σ average 1 = σ average 2 (As given in the question)3.83×10^9 = 0.75×10^9 + (6×10³/A)A = 14.26 mm.The position of the 6-kn load d = 140 mm - 28.5 mm = 111.5 mm.Hence, the position d of the 6-kn load such that the average normal stress in both rods is the same is 111.5 mm.

More on distance: https://brainly.com/question/10950863

#SPJ11

The orbit radius of the blob in a circular orbit about the black hole is approximately 33,288 km.

The orbit radius of a blob in a circular orbit about a black hole whose mass is 13.5 times the mass of the Sun can be calculated using the formula:

r = (GMT²/4π²)1/3,  where G is the gravitational constant, M is the mass of the black hole, and T is the period of the orbit.

X-ray pulses from Cygnus X-1, a celestial x-ray source, have been recorded during high-altitude rocket flights. The signals can be interpreted as originating when a blob of ionized matter orbits a black hole with a period of 7.84 ms. Therefore,

T = 7.84 × 10⁻³ seconds

M = 13.5

Mʘ = 13.5 × 1.991 × 10³⁰ kg = 2.68585 × 10³¹ kgG = 6.67259 × 10⁻¹¹ N m²/kg²

Now, substituting the given values in the formula:

r = [(6.67259 × 10⁻¹¹ × 2.68585 × 10³¹ × (7.84 × 10⁻³)²) / (4π²)]1/3r = 33,288,375 meters ≈ 33,288 km

Learn more about black hole and orbit radius at : https://brainly.com/question/30011727

#SPJ11

When a dielectric is inserted between the plates of a parallel-plate capacitor connected to a battery that maintains a constant potential difference V, the electric field between the plates, the charge on the plates, the capacitance C, and the energy stored in the capacitor all undergo changes. These changes can be explained in the following way:

Part A: The electric field between the plates decreases.

Part B: The charge on the plates increases.

Part C: The capacitance increases.

Part D: The energy stored in the capacitor increases.

Explanation:

A capacitor is an electronic device that stores electric charge. The capacity of a capacitor to store an electric charge is called its capacitance, and it is calculated by the ratio of the charge on each plate to the potential difference between them. When a dielectric material is inserted between the plates of a capacitor, the capacitance of the capacitor increases since the electric field between the plates decreases, and the charge on the plates increases since the electric field is now being shared between the capacitor plates and the dielectric material. As a result, the energy stored in the capacitor increases since it is proportional to the square of the potential difference V and inversely proportional to the capacitance C.

Part A:
The electric field between the plates (c) decreases. This is because the electric field is equal to the potential difference (V) divided by the plate separation (d) V/D, and since the potential difference is constant, the electric field remains unchanged.

Part B:
The charge on the plates (a) increases. When a dielectric is inserted, the capacitance increases. Since the potential difference remains constant, the increased capacitance will result in an increased charge on the plates according to the formula Q = CV.

Part C:
The capacitance (a) increases. The insertion of a dielectric between the plates of the capacitor increases its capacitance by a factor of the dielectric constant (k) of the material. The new capacitance can be expressed as C= kC, where C is the initial capacitance.

Part D:
The energy stored in the capacitor (a) increases. The energy stored in a capacitor can be expressed as U = 0.5CV^2. Since the capacitance increases and the potential difference remains constant, the energy stored in the capacitor also increases.

To known more about capacitor visit:

https://brainly.com/question/17176550

#SPJ11

David travelled a total of 5 kilometres.

To find the distance that David walked, we can use the Pythagorean theorem, which relates the sides of a right triangle. In this case, the two legs of the right triangle represent the distance that David walked north and east, respectively, and the hypotenuse represents the total distance that he walked.

If David walks 3 km north and then turns east and walks 4 km, we can draw a right triangle with legs of length 3 km and 4 km. Applying the Pythagorean theorem, we have:

distance²2 = (3 km)²+ (4 km)²

distance²2 = 9 km²+ 16 km²

distance = √(25) km

distance = 5 km

Therefore, the total distance that David walked is 5 km.

To learn more about distance refer to:

brainly.com/question/11581397

#SPJ4

The electric field magnitude at the position of a 30 nC charge that experiences a 0.038 N electric force is 1,266,666.67 N/C.

What is the magnitude of the electric field?

The magnitude of the electric field can be calculated using the formula below:

|E|=|F|/q

Where |E| represents the magnitude of the electric field; |F| represents the magnitude of the electric force on the charged particle; and q is the charge on the particle

Substituting the given values into the equation yields:

|E|=|F|/q

=0.038 N/30 nC

=1,266,666.67 N/C

Thus, the magnitude of the electric field at the position of this charge is 1,266,666.67 N/C.

For more information about electric field refers to the link: https://brainly.com/question/8971780

#SPJ11

Microwave communication is a type of wireless communication that sends information across great distances using high-frequency radio waves in the microwave frequency range.

Microwaves are used by many different kinds of equipment for communication, including Microwave ovens: These appliances heat food via excitation of the water molecules within the food, which causes them to vibrate and produce heat. Satellite communication systems: To communicate with ground stations and other satellites, spacecraft in Earth's orbit use microwave waves. Microwave frequencies are used by cellular networks to deliver speech and data transmissions between mobile devices and cell towers. Wi-Fi routers: Wi-Fi routers transport data wirelessly between devices connected to a local network using microwave frequencies. Radar systems: Radar systems identify and locate objects using microwave frequencies,

learn more about Microwaves   here:

https://brainly.com/question/15708046

#SPJ4

Answer:

0.777 s

Explanation:

The speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring is 2.23 m/s.

The acceleration of the elevator when it is 1.00 below the point where it first contacts a spring is -9.8 m/s².

The speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring is 2.23 m/s. When the elevator is 1.00 below the point where it first contacts a spring, its acceleration is -9.8 m/s². This is because the elevator is moving downwards and accelerating due to gravity.
To solve for the speed of the elevator after it has moved downward 1.00 from the point where it first contacts a spring, we need to use the formula for potential energy and kinetic energy:
Potential Energy (PE) = Kinetic Energy (KE)
mgh = 1/2 mv²
where m is the mass of the elevator, g is the acceleration due to gravity, h is the height, and v is the velocity.
Rearranging the formula, we get:
v = √(2gh)
Substituting the given values, we get:
v = √(2 × 9.8 × 1) = 2.23 m/s
To solve for the acceleration of the elevator when it is 1.00 below the point where it first contacts a spring, we simply use the acceleration due to gravity which is -9.8 m/s². The negative sign indicates that the acceleration is directed downwards.
for such more question on acceleration

https://brainly.com/question/460763

#SPJ11

Answer:

Assume that the tsunami wave moves at a constant velocity.

The pacific ocean is approximately 12,300 miles wide, and a tsunami wave moves at roughly 500 mi/h.

12,300/500=24.6h

The potential energy of the ball at this point is maximum as the ball has the highest height at this point.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is zero, its momentum is also zero.
Momentum = 0, KE = 0, PE > 0
Hence, the ranks of quantities at each point are as follows:
A) C, B = D, A
B) C, B = D, A
C) A, B = D, C

The ball is at rest at the left of the metal track. It is assumed to have enough friction to roll, but not enough to reduce its speed. In this question, we have to rank the quantities from the greatest to the least at each point. Given below are the quantities that are to be ranked,

a) Momentum,

b) KE,

c) PE.
Rank of quantities at each point:
At point A: Here, the ball has the maximum height. It is at rest at this point. At this point, the ball has the highest potential energy, PE.
PE>KE=0
The velocity of the ball at this point is zero. Hence, the kinetic energy of the ball is zero.
The momentum of the ball is given by the product of mass and velocity. As the velocity of the ball is zero, its momentum is also zero.
Momentum = 0, KE = 0, PE > 0
At point B: At this point, the ball has converted some of its potential energy into kinetic energy. The ball has lost some of its height, and hence, its potential energy.
[tex]PE>BKE, KE>BPE[/tex]
As the ball is moving, it has some velocity. Hence, it has kinetic energy.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is non-zero, its momentum is also non-zero.
Momentum > 0, KE > 0, PE < 0
At point C: At this point, the ball has lost all its potential energy, and all of it is converted into kinetic energy.
[tex]KE>CPE, PEC=0[/tex]
The velocity of the ball is the highest at this point. Hence, the kinetic energy of the ball is the highest at this point.
The momentum of the ball at this point is given by the product of mass and velocity. As the velocity of the ball is the highest at this point, its momentum is also the highest.
Momentum > 0, KE > 0, PE = 0
At point D: At this point, the ball has lost all its kinetic energy due to friction. Hence, it comes to rest at this point.
KE=0, PED>0

for such more questions on momentum

https://brainly.com/question/1042017

#SPJ11

The magnetic field at the center of the coil is 0.0014 T.

How to find the magnetic field at the center of the coil? The magnetic field formula is given by, B = μ_0 * n * I Where,

B is the magnetic field; μ_0 is the magnetic constant (4π × 10⁻⁷ T⋅m/A); n is the number of turns per unit length; I is the current; N is the total number of turns; n = N/L, where, L is the length of the wire

The length of the wire is given by, L = π * D = π * 4.50 × 10⁻² = 0.141 m

Thus, n = N/L = 400/0.141 = 2830 turns/m

Now, B = μ_0 * n * I = 4π × 10⁻⁷ × 2830 × 0.5 = 0.0014 T

Therefore, the magnetic field at the center of the coil is 0.0014 T.

To know more about magnetic field, refer here:

https://brainly.com/question/14848188#

SPJ11#

The electric potential energy, U, of two point charges is given by the equation, U = kq1q2/r where k is Coulomb's constant, q1 and q2 are the charges and r is the distance between the two charges. Now, let's solve the question using this equation. There are two charges, q1 and q2, and a parallel plate capacitor between them. The distance of q1 from the negative plate is s, and the distance of q2 from the negative plate is 2s. The charges have the same magnitude of charge, so let's assume q1 = q2 = q. Using the formula mentioned earlier, we get U1= kq^2/sU2= kq^2/2s. Therefore, the ratio of their potential energies is U2/U1= kq^2/2s / kq^2/sU2/U1= (kq^2/2s) × (s/kq^2)U2/U1= 1/2.

Therefore, the ratio of their potential energies is 1:2.

For more information regarding this topic, you can click the below link

https://brainly.com/question/14306881

#SPJ11

Rutherfordium is a synthetic element with the atomic number 104 and symbol Rf. As a synthetic element, it is not found naturally on Earth and is produced through nuclear reactions in laboratories.

Rutherfordium is a member of the transition metals group and is expected to have similar physical and chemical properties to its neighboring elements in the periodic table. However, due to its radioactive nature and short half-life, its physical properties are difficult to determine.

While there is no experimental data available on the state of matter of rutherfordium at room temperature, it is expected to be a solid metal, similar to other transition metals, such as copper or nickel.

To learn more about matter refer to:

brainly.com/question/28591826

#SPJ4

Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:

3 x 9 s = 27 s

Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

It is true! The third tic point would represent three times nine seconds, or 27 seconds, as each tic mark on the horizontal axis denotes a time interval of nine seconds.Each tic mark indicates a time period of 9 seconds if the scale on the horizontal axis has a division of 9 seconds. As a result, the third tic point on the horizontal axis would denote the following period of time:Hence, 27 seconds are indicated by the third tic point on the horizontal axis.

learn more about horizontal axis here:

https://brainly.com/question/29774083

#SPJ4

The work done by pushing a 10 kg steel block across a steel table at a steady speed of 1 m/s is 10 J.

Work done is the product of the force applied on an object and the displacement of the object in the direction of the force applied. The formula for work is given by:

W = F × d

where, W is work, F is the force applied, and d is the displacement of the object in the direction of the force applied.

To find the work done, we need to find the force applied on the block. Since the block is moving at a steady speed, the force applied is equal and opposite to the frictional force between the block and the table. The force of friction can be calculated as follows:

Ff = μN

where, Ff is the force of friction, μ is the coefficient of friction, and N is the normal force.

Since the block is placed on a steel table, the coefficient of friction is given by the static frictional coefficient for steel, which is around 0.8. The normal force is equal to the weight of the block.

N = m × g

where, N is the normal force, m is the mass of the block, and g is the acceleration due to gravity.

Substituting the given values:

N = 10 kg×9.8 m/s² = 98 N

The force of friction is:

Ff = 0.8 × 98 N = 78.4 N

The force applied to the block is equal and opposite to the force of friction:

Substituting the values in the formula for work,

W = F × d

W = 78.4 N × 1 m

W = 78.4 J ≈ 10 J

Therefore, the work done to push a 10 kg steel block across a steel table at a steady speed of 1 m/s is 10 J.

Learn more about Work done here:

https://brainly.com/question/13662169

#SPJ11

The statements that are true for the characteristics of accretion disk are, option (C) Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely and option (E) The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

An accretion disk is a disk of gas and dust that forms around a central object, such as a proto star or black hole, due to the conservation of angular momentum during the collapse of a rotating interstellar cloud. As material falls inward toward the central object, it forms a disk that heats up and emits radiation, providing a source of energy for the object. Some true statements regarding accretion disks are:

C. Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely.

E. The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

Statement A is incorrect because an accretion disk forms due to the conservation of angular momentum, not because there is nothing to stop the collapse of an interstellar cloud. Statement B is also incorrect because the size of an accretion disk can vary greatly depending on the size and mass of the central object and the amount of material available. Statement D is incorrect because most of the material in an accretion disk is expected to end up in the central object, not in its planets.

Therefore, the correct options are option (C) Conservation of angular momentum leads a cloud to form a disk rather than collapse entirely and option (E) The shape and motion of the accretion disk are the reason that the subsequently formed planets all orbit in or near the equatorial plane of the star.

Learn more about accretion disk here

brainly.com/question/1900229

#SPJ4

At a given pressure, a substance in the saturated vapor phase will be at a lower temperature than a superheated vapor.

Saturated vapor refers to the state of a material in which it contains a maximum quantity of vapor that is uniformly blended with the liquid or solid state of the same chemical composition at a specified temperature and pressure.

A superheated vapor is a vapor that is heated beyond its boiling point or saturation temperature for its pressure. As a result, it will not condense back into a liquid phase until it has cooled sufficiently. As a result, it's simply vapor, with no liquid portion to it.

According to Charles's law, if the pressure of a gas is kept constant, the volume of the gas varies directly with the temperature. If pressure remains constant and temperature increases, the volume of a substance expands, indicating that molecules are gaining energy and colliding with one another more frequently. As a result, the kinetic energy of the system increases. When a substance is in a superheated vapor state, it is at a higher temperature than when it is in a saturated vapor state at the same pressure.

Learn more about saturated vapor phase here: https://brainly.com/question/13407628

#SPJ11