Answer:
f = 1.5 Hz
Explanation:
Given that,
18 waves pass by a person in 12 seconds.
We need to find the frequency of these water waves.
We know that,
Frequency = no. of waves per second
So,
[tex]f=\dfrac{18}{12}\\\\f=1.5\ Hz[/tex]
So, the frequency of these water waves is equal to 1.5 Hz.
A strong magnetic field surrounds Earth. How does Earth’s magnetic field help humans?
It holds people’s belongings tight to Earth’s surface.
It’s responsible for cycling water through Earth’s four spheres.
It keeps the solar wind from reaching Earth.
It helps people navigate using a compass.
It helps cool Earth’s surface.
Answer:
-It holds people's belongings tight to Earth's surface
-it helps cool Earth's surface
- it keeps the solar wind from reaching earth
a car accelerates along a straight road from rest to 75km/h in 5.0s. What is the magnitude of its average acceleration? show up solutions
Answer:
4.186 m/s^2
Explanation:
First, convert km/hr to m/s:
(75 km/hr)(1000m/1km)(1hr/60min)(1min/60s) = 20.83 m/s
Then, divide 20.93 m/s by 5.0s
(20.93 m/s) / (5.0s) = 4.186 m/s^2
chef in a local restaurant bought a bag of rice but he was puzzled to see some impurities such as sand, salt and some stapler pins mixed with the rice. Help him to separate the impurities. Sort the type of impurities ( Soluble/Insoluble) present in the bag.
Answer:
Soluble - salt
Insoluble - sand and stapler pins
Explanation:
The salt is soluble because it is an ionic solid which ready dissolves in water to form a solution.
The sand is insoluble because, it is a non-metallic solid which does not readily dissolve in water while, the stapler pin is insoluble because it is a metallic solid which does not readily dissolve in water.
a branch falls from a tree.how fast is the branch moving after 0.28 seconds?
2.75 m/s. Hope this helps.
(5 pts) If the object can reach a speed of 2m/s, what
is its kinetic energy? (If you don't have a scaler,
estimate the mass of the object in kg)
KE= | mv2
Answer:
[tex] = \frac{1}{2} m {v}^{2} \\ = \frac{1}{2} \times m\times {2}^{2} \\ = 2m \: joules[/tex]
Physical characteristics can be transmitted from generation, from parents to offspring. The passage of genetic Instructions from one generation to anther is known as which of the following?
A. Heredity
B. Chromosomes
C. DNA
D. Genes
Answer:
A. HeredityExplanation:
Heredity is defined as the passage of genetic instructions from one generation to the next.
Please help meeeeeeeeeeeeeeeeee??????????!!!!!?!!??!!?!!!?
what is netwon first law of motion
Answer:
Newton’s first law of motion states that there must be a cause—which is a net external force—for there to be any change in velocity, either a change in magnitude or direction. An object sliding across a table or floor slows down due to the net force of friction acting on the object.
Explanation:
A battery-powered set of five patio lanterns is connected in series. An ammeter measures the current through the battery as 0.75 A. The total resistance of the circuit is 52 0. (a) Calculate the voltage drop across the battery. (b) Calculate the voltage drop across each load.
(a) 39 V
(b) 7.8 V
Explanation:(a) Neglecting the internal resistance of the battery, the voltage drop (V) across the battery is found from Ohm's law as follows;
V = IR -------------------------(i)
Where;
I = current through the battery
R = total resistance of the circuit.
From the question;
I = 0.75A
R = 52.0Ω
Substitute the values of I and R into equation (i)
=> V = 0.75 x 52.0
=> V = 39Volts
Therefore, the voltage drop across the battery is 39 Volts
(b) Since the set of lanterns is connected in series, then the same current flows through each of the lanterns. Also, since the lanterns are identical, the resistance ([tex]R_{L}[/tex]) of each of them is given by the total resistance (R = 52.0Ω) divided by the number of lanterns. i.e
[tex]R_{L}[/tex] = [tex]\frac{52.0}{5}[/tex]
[tex]R_{L}[/tex] = 10.4Ω [Each lantern has a resistance of 10.4Ω]
The current flowing through them is the same as the current (I = 0.75A) flowing the circuit.
Therefore, using Ohm's law, the voltage drop ([tex]V_L[/tex])across each load (lantern) is
[tex]V_L[/tex] = I x [tex]R_{L}[/tex]
[tex]V_L[/tex] = 0.75 x 10.4
[tex]V_L[/tex] = 7.8Volts
Therefore, the voltage drop across each load is 7.8 Volts
1. Mineral in the earth's crust exists naturally in form of solid elements or compounds *
True
False
Answer:
True
Explanation:
Minerals can be defined as any form of naturally occurring, inorganic solid substance characterized by a crystal structure. Also, minerals are homogeneous in nature with a defined chemical composition and characterized by a crystal structure comprising of ions, atoms, or molecules in an orderly arrangement.
Generally, molecules attach on the inside of a mineral to give it shape. Therefore, the molecule of a mineral is a crystal three-dimensional regular structure (arrangement) of chemical particles that are bonded together and determines its shape.
Furthermore, the chemical composition (property) of a mineral reflect the presence and arrangement of atoms in each.
Due to the fact that these molecules are structurally arranged (ordered) and are repeated by different symmetrical and translational operations, they determine the shape of minerals. Some examples of minerals are iron, copper, aluminum, tin, coal, quartz, feldspar, mica, etc.
Additionally, inorganic-crystalline solid substances which are found naturally within earth are referred to as minerals.
In conclusion, a mineral in the earth's crust exists naturally in form of solid elements or compounds.
A dart with a mass of 0.5kg is thrown at 15m/s and sticks into a 1kg apple hanging
on a string. What is the total momentum of the objects before the collision?
Answer:
Before the collision:
m v1 = .5 kg * 15 m/s = 7.5 kg-m/s
Incidentally, after the collision
(M + m) v2 = 7.5
v2 = 7.5 / (1 + .5) = 5 m/s
A cylinder has length "L" and area of cross-section "A" what is its volume
Answer:
[tex]{ \tt{volume = \pi {r}^{2} h}}[/tex]
Which nucleus completes the following equation?
A. 299 Np
B. 20Pa
C. 2 Pa
D. - Np
Answer:
Option D. ²³⁹₉₃Np
Explanation:
Let the unknown be ʸₓA.
Thus, the equation becomes:
²³⁹₉₂U —> ⁰₋₁e + ʸₓA
Next, we shall determine the x, y and A. This can be obtained as follow:
92 = –1 + x
Collect like terms
92 + 1 = x
93 = x
x = 93
239 = 0 + y
239 = y
y = 239
ʸₓA => ²³⁹₉₃A => ²³⁹₉₃Np
Thus, the complete equation is:
²³⁹₉₂U —> ⁰₋₁e + ²³⁹₉₃Np
If you lift a 80 N book 50 cm off the floor, how much work did you do?
1. 0
2. 4000 J
3. 40 J
4. 1.6 J
A man pushes a couch a distance of 0.75 m. If 450 J of work is done, what is the magnitude of the force applied?
1. 16.9 J
2. 45
3. 1350 J
4. 2700 J
Aslaam 3lekm m3akm yaseen my 8nat alninkm
I WILL MARK BRAINLLIEST IF U ANSWER
PLS FASTTTT
Answer:
1) vitamins
2) Meat, eggs, liver
Explanation:
1) Low levels (deficiency) in vitamins such a vitamin B12 and vitamin D can lead to tiredness.
Vitamin B12 is one of the most important nutrients for energy because it helps the blood, digestive system, brain and nervous system. Vitamin D is necessary for bone health and good immune function.
2) To prevent deficiency in vitamins, foods such as beef, eggs, liver, fish can be eaten. Also, supplements such as B-complex vitamin can be taken.
Sample Response: Yes, the law of conservation of momentum is satisfied. The total momentum before the collision is 1.5 kg • m/s, and the total momentum after the collision is 1.5 kg • m/s. The momentum stays the same after the collision. What did you include in your response? Check all that apply. The law of conservation of momentum is satisfied. The momentum before the collision is 1.5 kg • . The momentum after the collision is 1.5 kg • . The momentum is the same after the collision as it was before the collision.
Answer:
All options presented were applied to the answer.
Explanation:
The sample response presented in the question above, refers to a closed system where two molecules after colliding satisfy the conservation of momentum law, which can also be called the conservation law of linear momentum. This law states that in a closed system the initial state of the components must be maintained and remain the same until the final state, that is, the two molecules maintain their ideal momentum before and after the collision. This means that if they had 1.5 kg • m/s before the collision, this value must be maintained after the collision. All these concepts are presented in the sample response.
Answer:
What did you include in your response? Check all that apply. The law of conservation of momentum is satisfied. The momentum before the collision is 1.5 kg • m/s. The momentum after the collision is 1.5 kg • m/s. The momentum before and after the collision is the same.
Explanation:
The sample response presented in the question above, refers to a closed system where two molecules after colliding satisfy the conservation of momentum law, which can also be called the conservation law of linear momentum. This law states that in a closed system the initial state of the components must be maintained and remain the same until the final state, that is, the two molecules maintain their ideal momentum before and after the collision. This means that if they had 1.5 kg • m/s before the collision, this value must be maintained after the collision. All these concepts are presented in the sample response.
Un cuerpo permanecerá en movimiento rectilíneo uniforme o en reposo si la fuerza neta sobre él es nula o si sobre este no actúa ninguna fuerza". ¿A qué concepto corresponde la definición? *
Answer:
Primera Ley de Newton, también llamado Ley de la Inercia de Newton.
Explanation:
Este concepto es la Primera Ley de Newton o Ley de la Inercia de Newton, la cual dice textualmente que todo cuerpo al cual no se aplica ninguna fuerza externa neta no nula sobre sí se encuentra en reposo o desplazándose a velocidad constante.
Entiéndase a la inercia como la tendencia de un cuerpo a oponerse al cambio en su estado de movimiento.
What can you drop of liquid Mercury be described as?
physics
please help
its physic based on the law of movement
Explanation:
4) The net torque on the on the meter stick is equal to zero in order to have no rotation.
[tex]\tau_{1} = \tau_{2}[/tex]
[tex]F_{1}d_{1} = F_{2}d_{2}[/tex]
[tex](8 \:N)(0.3\: m) = F_{2}(0.1 \:m)[/tex]
[tex]F_{2} = \frac{(8 \:N)(0.3 \:m)}{(0.1 \:m)} = 24 \:N[/tex]
5) We are going the same equations in #4 here.
[tex]F_{1}d_{1} = F_{2}d_{2}[/tex]
[tex](500 \:N)(2.4 \:m) = F_{2}(3.0 \:m)[/tex]
[tex]F_{2} = \frac{(500 \:N)(2.4 \:m)}{(3.0 \:m)} = 400 \:N[/tex]
I WILL MARK U BRAINLIEST IF YOU ANSWER
BLUEBLACK COLOR IS FORMED WHEN STARCH AND IODINE IS MIXED .
A book with a mass of 2 kg sits on top of a book shelf at a height of 3 m. How much potential energy does the book have
Answer:
Answer is 98 joules
Explanation:
P. E=2*9.8*3=98
S.i unit of potential energy ⚡ is joules
So answer is 98 joules
Which statement describes how objects can be affected by a noncontact
force between then?
O A. An electric force between two objects will always cause them to
attract each other.
B. A gravitational force between Two objects will always cause then
to repel each other.
C. A magnetic force between two objects will always cause them to
attract each other.
D. An electric force between two objects may cause them to either
attract or repel each other.
Answer: D
Explanation:
Which type radiation can be observed well from Earth's surface?
Answer:
Eletromagnetic radiation which is also known as visible light.
Explanation:
Answer:
Gamma Ray's as they have the shortest wavelength and highest frequency in the electromagnetic Spectrum.
Can anybody help?? If somebody can answer I'd love it!!
Answer:
1.
a. T
b. F
c. T
d. F
e. T
2. Liquid, gas, solid
3. Water
4.
a. Solid
b. Gas
c. Water
5.
a. Add heat
b. Remove heat
c. Add heat
An oven consumes 425 kWh of energy in order to provide 386 kWh of useful energy. What is its percent efficiency?
Answer:
90.8%
Explanation:
efficiency = output / input
Simply just put in what we know.
386/425 = 0.908 (Rounded too 3 s.f)
And if you want this in percentage, you simply x100 your answer. Hence the answer being 90.8%
An object accelerating at 16 m/s/s doubles its mass and triples its net force acting on it. What will the new acceleration be? (Just number no units)
Answer:
24 m/s²
Explanation:
The given parameters are;
The initial acceleration of the object, a = 16 m/s²
Let 'm' represent the initial mass of the object
The initial force acting on the object, F = m × a
∴ F = 16 × m = 16·m
When the mass is doubled, we have;
The new mass of the object, m₂ = 2 × m = 2·m
When the net force acting on the object triples, we have;
The new net force acting on the object, F₂ = 3 × F = 3 × 16·m = 48·m
From F = m × a, we have;
a = F/m
∴ The new acceleration of the object, a₂ = F₂/m₂
From which, by plugging in the values, we have;
a₂ = 48·m/(2·m) = 24
The new acceleration of the object, a₂ = 24 m/s².
The lamps in circuit drawn below are all identical, Each of the cells have a potential difference of 1.5 volts What is the potential difference across the 3 cells that are joined in series
Answer:
4.5V
Explanation:
In a arrangement of cells, the cells could be joined end to end(series) or to a common junction (parallel).
When cells are joined in series, the total emf of the cell is the sum of the individual emf of all the cells.
Hence;
Total emf = 1.5V + 1.5V + 1.5 V = 4.5 Volts
Calculate the average velocity of the cart for each fan mass. Round your answers to the nearest tenth.
The cart with Low fan mass has an average velocity of cm/s.
The cart with Medium fan mass has an average velocity of cm/s.
The cart with High fan mass has an average velocity of cm/s.
Answer:
Part A
The cart with low fan mass has an average velocity of approximately 63.29 cm/s
Part B
The cart with medium fan mass has an average velocity of approximately 45.[tex]\overline{045}[/tex] cm/s
Part C
The cart with high fan mass has an average velocity of approximately 36.496 cm/s
Explanation:
Part A
The average velocity is given as follows;
[tex]Average \ velocity, v_{average} = \dfrac{Total \ distance}{Elapsed \time \ to \ finish \ line} = \dfrac{\Delta x}{\Delta t}[/tex]
The average velocity for the 2 kg fan mass, which is the cart with low fan mass, is [tex]v_{average}[/tex] = 500 cm/7.9 s ≈ 63.29 cm/s
The cart with low fan mass has an average velocity [tex]v_{average}[/tex] ≈ 63.29 cm/s
Part B
The average velocity of the cart with medium fan mass, 4 kg, is [tex]v_{average}[/tex] = 500 cm/11.1 s = 45.[tex]\overline{045}[/tex] cm/s
The cart with medium fan mass has an average velocity [tex]v_{average}[/tex] ≈ 45.[tex]\overline{045}[/tex] cm/s
Part C
The average velocity of the cart with high fan mass, 6 kg, is [tex]v_{average}[/tex] = 500 cm/13.7 s = 36.496 cm/s
The cart with high fan mass has an average velocity [tex]v_{average}[/tex] ≈ 36.496 cm/s.
Answer:
its
67.6
78.1
89.3
Explanation:
i just took the assignment, 2021.
Amy put some salt in a weighing dish. Then she put the weighing dish on a sensitive balance to measure the mass of the salt. She removed the weighing dish from the balance and put it in several similar balances. She recorded the mass each time. Mass 1 Mass 2 Mass 3 Mass 4 Masse 5 5.608 g 5.607 g 5.608 g 5.608 g 5.609 g Amy forgot to subtract the mass of the empty weighing dish from her measurements, and she reported the mass of the salt as 5.608 grams. Amy's measurement of the salt's mass accurate because . Amy's measurement of the salt's mass precise because .
Answer:
Explanation:
i. Accuracy in measurement is a term that is used to describe the closeness of a measured value to its actual value. It relates the actual value to the measured values.
Therefore in the given question, Amy's measurement of the salt's mass is accurate because her final value is close to all the measured values.
ii. Precision in measurement is a term that is used to describe the closeness of different measured values to each other. It relates the keenness in the measured values.
Thus, Amy's measurements of the salt's mass is precise because the values of the masses are close to one another.
Incident beam
Which order is the brightest?
Answer:
mark me as the brainliest plss
