A moving-coil instrument, which gives full-scale deflection with 0.015 A has a copper coil having resistance of 1.5 Ohm at 15°C and a temperature coefficient of 1/234.5 at 0 degree C in series with a swamp resistance 3.5 Ohm having a negligible temperature coefficient. Determine the resistance of shunt required for a full-scale deflection of 20 A and the resistant required for a full-scale deflection of 250 V. If the instrument reads correctly at 15°C, determine the percentage error in each case when the temperature is 25°C.

Answer:

[tex]T_2=315.69k[/tex]

Explanation:

Initial Temperature [tex]T_1=500K[/tex]

Initial Pressure [tex]P_1=1000kPa[/tex]

Final Pressure [tex]P_2=200kPa[/tex]

Generally the gas equation is mathematically given by

[tex]\frac{T_2}{T_1}=\frac{P_2}{P_1}^{\frac{n-1}{n}}[/tex]

Where

n for [tex]CO=1.4[/tex]

Therefore

[tex]\frac{T_2}{500}=\frac{200}{1000}^{\frac{1.4-1}{1.4}}[/tex]

[tex]T_2=315.69k[/tex]

Answer:

80⁰C

Explanation:

80°C.

Normal flat plate collectors can deliver heat at temperatures up to 80°C. Deficiency rates for normal flat plate collectors can be classified as visual losses, which produce with cumulative angles of the incident sunshine, and thermal losses, which upsurge fast with the working temperature intensities

Answer:

p q output ¬(p ∧ q)

0 0 1

0 1 1

1 0 1

0 0 0

p q output ¬p ∨ ¬q

0 0 1

0 1 1

1 0 1

0 0 0

Explanation:

We'll create two separate truth tables for both sides of the equation, and see if they match.

The expressions in the question use AND, OR and NOT operators.

Let's start with ¬(p ∧ q)

Now let's move on to the second expression ¬p ∨ ¬q

Therefore we can say the two expressions are equivalent.

Attached  the truth table to verify the first De Morgan's law ¬(p ∧ q) ≡ ¬p ∨ ¬q:

As you can see from the attached truth table, the truth values for ¬(p ∧ q) and ¬p ∨ ¬q are the same for all combinations of p and q, confirming the validity of the first De Morgan's law.

De Morgan's law is a fundamental principle in propositional logic.

It states that the negation of a conjunction (AND) is equivalent to the disjunction (OR) of the negations of the individual propositions.

Learn more about truth table at:

https://brainly.com/question/28605215

#SPJ3

Answer:

maybe take a really common toy kids play with or often see, find the average height for the toy and do the math to see how many of those toys stacked ontop of eachother would make up 2000 feet. For example (this isn't accurate btw just an idea of what it would sound like but) "Have you ever seen a barbie doll? well if you stack 400 barbie dolls ontop of their head it would be equal to 2000 feet."

Explanation:

sometimes taking common or beloved objects children have into your examples makes them have a better image of how small or how big something is.

Answer:

hola

Explanation:

Explanation:

so its an question?..........

Answer:

Explanation:

% Clears variables and screen

clear; clc

% Asks user for input

n = input('Total number of objects: ');

r = input('Size of subgroup: ');

% Computes and displays permutation according to basic formulas

p = 1;

for i = n - r + 1 : n

   p = p*i;

end

str1 = [num2str(p) ' permutations'];

disp(str1)

% Computes and displays combinations according to basic formulas

str2 = [num2str(p/factorial(r)) ' combinations'];

disp(str2)

=================================================================================

Example: check

How many permutations and combinations can be made of the 15 alphabets, taking four at a time?

The answer is:

32760 permutations

1365 combinations

==================================================================================

Answer:

It is created on Microsoft Edge

Explanation:

Answer:

c +5

Explanation:

we have difference in energy =

2.18x10⁻¹⁸ x z² / n²

now n = 1

amount of energy absorbed Δdelta = 7.84×10−17 J

7.84×10⁻¹⁷ = 2.18x10⁻¹⁸ x z²

we divide through by 2.18x10⁻¹⁸

z² = 7.84×10⁻¹⁷ / 2.18x10⁻¹⁸

z² = 35.9633

z = √35.9633

z = 5.9969

≈ 6

charge = atomic number 6 - number of electrons available in the element 1

= 6-1 = 5

from the calculations above, the charge of the one electron specie would be c +5

Answer:

Data Rate Signaling

Answer:

hey. its a big question. solved from *c hegg

Explanation:

Answer: all of the above

Explanation:

To drive safely in the station, the correct option is D. All of the above.

It should be noted that when a person is driving, it's essential for the person to drive carefully in a station.

One should not smoke in a station. Also, it's important that the driver should turn on their hazard lights

Furthermore, it's important for one to roll their windows down, turn off the radio and also maintain idle speed.

In conclusion, the correct option is D.

Read related link on:

https://brainly.com/question/18889428

Answer:

Answer to the following question is as follows;

Explanation:

It is critical to communicate well during negotiations and conversation in order to attain your objectives. Communication also becomes essential in business and corporation . Effective communication may help you as well as your employees develop a strong professional relationship, which can boost morale and efficiency.

Answer:

report on a fight you have witnessed

Answer:

The moment of inertia is basically a physical quantity which describes how easy it is for a body to rotate itself around a given axis.

In easier wording: Moment of Inertia is a body and when it starts rotating or moving, it will keep doing so until we stop it by force.

Explanation:

For example, a car that is moving and active will continue to move even if you were to switch the engine off.

Answer:

Only Technician A

Explanation:

Continuously variable transmission (CVT) does not shift gears because it simply doesn't have gears. It instead uses 2 pulleys which change constantly and continuously in size, and they are linked by a belt. Continuously variable transmission (CVT) is automatic transmission as mentioned in the question above, largely due to the power the belt continuously transmits, making the vehicle's engine work in the optimum power range.

While Technician B saying, that a continuously variable transmission has a maximum of six distinct gear ranges, which is not correct because continuously variable transmission (CVT) works with an unlimited number of gear ratios within a fixed range.

Answer:

Explanation:

Minerals and rocks are the same. Aggregates of minerals form rocks. Minerals determine the texture of a rock. Most rocks are made of a single mineral type.

Answer:

Voltage Regulator

Technician A is correct.

Explanation:

Technician B is not correct.  The voltage regulator is not installed between the output terminal of the alternator and the positive terminal of the battery as claimed by Technician B.  Technician A's opinion that the voltage regulator controls the strength of the rotor's magnetic field is correct.  The computer can also be used to control the output of the alternator by controlling the field current.

Answer:

you have to report to the federal aviation administration upon request

Explanation:

An unmanned aircraft can also be a drone it is an aircraft that does not have passengers or a human pilot.

Such an aircraft could be fully autonomous but most times they have a human pilot who controls it remotely.

Now you have to report this deviation to the federal aviation administration. This body is responsible for the enforcement of regulations that have to do with the manufacture, operation and maintenance of aircrafts. The body makes sure there is an efficient and safe system for a navigation and they also control air traffic.

Solution :

Let [tex]$x(t) = \frac{\sin (20 \pi t)}{\pi t}$[/tex]

[tex]$T_s = 20$[/tex] ms, so [tex]$f_s=\frac{1}{T_s}[/tex]

                           [tex]$=\frac{1}{20}$[/tex]

                           = 0.05 kHz

[tex]$f_s=50 $[/tex] Hz , ws = [tex]$2 \pi f_s = 100 \pi$[/tex]  rad/s

We know that,

FT → [tex]$\frac{\sin (20 \pi \omega)}{\pi \omega}$[/tex]

The sampled signal is :

[tex]$XS(\omega) = \frac{1}{T_s} \sum_{k=- \infty}^{\infty}X (\omega-k\omega S)[/tex]

So, [tex]$XS(\omega) = \frac{1}{20 \times 10^{-3}} \sum_{k=- \infty}^{\infty}X (\omega-100 k \pi)[/tex]

     [tex]$XS(\omega) = 50 \sum_{k=- \infty}^{\infty}X (\omega-100 k \pi)[/tex]

to move or walk freely and easly

Answer:

f = 0.04042

Explanation:

temperature = 0°C = 273k

p = 600 Kpa

d = 40 millemeter

e = 10 m

change in  P = 235 N/m²

μ = 2m/s

R = 188.9 Nm/kgk

we solve this using this formula;

P = ρcos*R*T

we put in the values into this equation

600x10³ = ρcos * 188.9 * 273

600000 = ρcos51569.7

ρcos = 600000/51569.7

=11.63

from here we find the head loss due to friction

Δp/pg = feμ²/2D

235/11.63 = f*10*4/2*40x10⁻³

20.21 = 40f/0.08

20.21*0.08 = 40f

1.6168 = 40f

divide through by 40

f = 0.04042

Self induction and Mutual induction

If the current through the coil changes, the flux through the coil changes and an emf is induced. Since the emf is induced in the coil due to its own field, it is called self–induced emf and the phenomenon is called self–induction.

Answer:

Self induced EMF is the electro-motive force that is generated due to change in flux in the coil caused by the change in current in the same coil.

GIS

The full for GIS is : Geographic Information System.

The GIS is a system of mapping that is used to create, analyze, manage and map all the types of data.

It is a method capturing, checking as well as displaying all the data that is related to the position of the surface of earth.

Remote Sensing

Remote sensing is defined as a process where the various physical characteristics of an area are constantly monitored and detected by a process of measuring the reflection of the emitted radiations at ta distance.

The snow covered areas of the Kabul basin can be monitored and analyzed by using the process of GIS and remote sensing.

They provide a continuous source of information and data about snow covered peaks, the amount of snow to the authorities.

Learn More :

https://brainly.in/question/1556256?__cf_chl_captcha_tk__=pmd_2d2d9994422ca43d3cbbcf6322e6c34da175405a-1628654009-0-gqNtZGzNAvijcnBszQ3i

Answer:

I didn't understand your question or is it a fun fact

Answer:

a. Covalent modification = Seconds to minutes

b. Allosteric control = Milliseconds

c. Gene expression = Hours

Explanation:

Covalent modifications refer to the addition and/or removal of chemical groups by the action of particular enzymes such as methylases, acetylases, phosphorylases, phosphatases, etc. For example, histones are chromatin-associated proteins covalently modified by enzymes that add methyl groups (histone methylation), acetyl groups (histone acetylation), phosphate groups (histone phosphorylation), etc. Moreover, allosteric control, also known as allosteric regulation, is a type of regulation of the enzyme activity by binding an effector molecule (allosteric modulator) at a different site than the enzyme's active site, thereby triggering a conformational change on the enzyme upon binding of an effector. Finally, gene expression encompasses the cellular processes by which genetic information flows from genes to proteins (i.e., transcription >> translation). In metabolic pathways, enzymes that are able to catalyze irreversible reactions represent sites of control (for example, during glycolysis, pyruvate kinase is an enzyme that catalyzes an irreversible reaction, thereby serving as a control site). In turn, enzymatic activity is modulated by covalent modifications or reversible binding of allosteric effectors. Finally, metabolic pathways are also modulated by gene regulatory mechanisms that control the transcription of specific enzymes required for such pathways. During these processes, the times required for allosteric regulation, covalent modification (e.g., phosphorylation) and transcriptional control can be counted in milliseconds, seconds, and hours, respectively.