Answer:
[tex]\boxed {\boxed {\sf 82.7 \textdegree C}}[/tex]
Explanation:
We are asked to find the temperature of a gas given a change in pressure and volume. We will use the Combined Gas Law, which combines 3 gas laws: Boyle's, Charles's, and Gay-Lussac's.
[tex]\frac {P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
Initially, the gas has a pressure of 1.05 atmospheres, a volume of 4.25 cubic meters, and a temperature of 95.0 degrees Celsius.
[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{P_2V_2}{T_2}[/tex]
Then, the pressure increases to 1.58 atmospheres and the volume decreases to 2.46 cubic meters.
[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{1.58 \ atm *2.46 \ m^3}{T_2}[/tex]
We are solving for the new temperature, so we must isolate the variable T₂. Cross multiply. Multiply the first numerator by the second denominator, then multiply the first denominator by the second numerator.
[tex](1.05 \ atm * 4.25 \ m^3) * T_2 = (95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)[/tex]
Now the variable is being multiplied by (1.05 atm * 4.25 m³). The inverse operation of multiplication is division, so we divide both sides by this value.
[tex]\frac {(1.05 \ atm * 4.25 \ m^3) * T_2}{(1.05 \ atm * 4.25 \ m^3)} = \frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]
[tex]T_2=\frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]
The units of atmospheres and cubic meters cancel.
[tex]T_2=\frac{(95.0 \textdegree C)*(1.58* 2.46 )}{(1.05 * 4.25 )}[/tex]
Solve inside the parentheses.
[tex]T_2= \frac{(95.0 \textdegree C)*3.8868}{4.4625}[/tex]
[tex]T_2= \frac{369.246}{4.4625} \textdegree C}[/tex]
[tex]T_2 = 82.74420168 \textdegree C[/tex]
The original values of volume, temperature, and pressure all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 4 in the hundredth place to the right tells us to leave the 7 in the tenths place.
[tex]T_2 \approx 82.7 \textdegree C[/tex]
The temperature is approximately 82.7 degrees Celsius.
WHATS THE FREEZING POINT FOR WATER
Answer:
0 degrees Celcius and 32 degrees fahrenheit
Explanation:
please answer quick...................
Answer:
3). C
Explanation:
When inter-nuclear distance [ atomic radius ] is smaller, the nuclear attraction has a greater magnitude.
[tex].[/tex]
Freezing water cracking limestone
a
Chemical Change
b
Physical Change
Answer:
Freezing water and cracking limestone are physical changes.
(Physical Science)
Which group of metals includes elements with one valence electron? (1 point)
A. alkaline earth metals
B. rare earth metals
C. alkali metals
D. transition metals
Answer:
C
Explanation:
alkali metals are the Group I elements, which have 1 electron in their valence shells
Answer:
Alkali metals are the elements which have only one valence electron in their outermost or ultimate shell.
Explanation:
Alkaline Earth metals have 2 valence electron in their outermost shell and readily give up their 2 electron to achieve stability.
Rare Earth Metals have 3 valence electron in their outermost shell and they have high magnetic moments and divert range of magnetic structure.
Alkali Earth metals have 1 valence electron.
Transition metals generally have 2 valence electron .
Learn more on:
https://brainly.com/question/3062525
A pan containing 20.0 grams of water was allowed to cool from a temperature of 95.0 °C. If the amount of heat released is 1,200 joules, what is the approximate final temperature of the water?
75 °C
78 °C
81 °C
87 °C
Answer:
81 °C
Explanation:
This is a calorimetry question so a few things you will need for this. The calorimetry equation q=mcΔT & the specific heat of water (4.2J/g•°C). Other definitions are:
q = heat added/released by a sample
m = mass of sample
c=specific heat of sample
ΔT = change in temperature
from here we can rearrange the equation to state:
q/(mc) = ΔT
1200J/((20.0g)(4.2J/g•°C)) = ΔT
14°C = ΔT
If the starting temperature was 95.0°C and we know that the temperature was cooled by 14°C then the final temperature of the water would be 81.
Answer:
C. 81 c
Explanation:
took the test :)
Give an example of a non-biological chemical reaction that involves carbon. Name the process that converts a solid compound into a gas.
Answer: The combustion of methane (CH4) with O2.
Explanation: This is a chemical reaction involving carbon:
CH4 + 2O2 = CO2 + 2H2O
Come up with 2 examples of derived units from everyday life.
Answer:
answer
Explanation:
Area : Square Meters,
Volume : Cubic Meters,
Density : Kilograms per Meter Cube,
Velocity : Meters per Second Squared,
Force : Newtons (Mass multiplied by Acceleration or Mass multiplied by Displacement divided by Time squared)…..
HELP! Fill in the blanks:
The net charge of an atom is equal to the difference between the_____
in the atom's nucleus and the_____
Answer:
I don't know
Explanation:
is today your test
Plzzzzzz help me Write electronic configuratof sodium and chlorine in the term of subshell ?
Answer:
ans:Ne=2,8,1
ans:2,8,7
WILL MARK BRAINLEST IF CORRECT!
1) Burning toast physical or chemical
2) Cooking eggs: physical or chemical
3) Melting butter: physical or chemical
4) Removing the pulp (solid) from the orange juice using a juice strainer.: physical or chemical
5) Cutting the toast with a knife: physical or chemical
6) Digesting the food: physical or chemical
Can someone plz help me? Plzz giving brainliest!
(Plz chose 3 questions)
Answer:
Facts: A D and maybe C I think you are intended to say C
Explanation:
A is certainly not an opinion. It is either true, or it is not. I think it is intended as a fact.
B is an opinion (which I think is true)
C is kind of iffy. It might be true and it might be an opinion. In looking it up, it is factually incorrect. Cats are related to wildcats in the middle east.
D is also iffy. They can just eat disease free rodents. I'd classify it as more opinion than fact.
E. definitely an opinion.
what happens to the food dye in hot water?
Answer:
The food coloring mixes through the hot water faster than it mixes with the cold water. The reason for this is because in hot water, the water molecules have more energy and are moving faster than the molecules of cold water. This makes it way more easier for the dye to get mixed throughout the hot water.
Explanation:
Chemical changes can change which properties of a substance?
Group of answer choices
Reactivity
Color
Malleability
All of the above
Answer:
» Reactivity and color
Explanation:
though color is very minor answer because it also relates to a physical property.
[tex].[/tex]
A sample of brass weighing 1.203g was analyzed. The zinc in the alloy was reacted with 35.123g of HCl in excess, according to the balanced equation:
Zn (s) + 2HCl(aq) - > H2(g) + ZnCl2 (aq)
After all the zinc reacted, the mass of the remaining solution weighed 36.309g
What was the mass of H2 produced?
What mass of Zn reacted?
What was the percentage of Zn (by mass) in the alloy?
The number of moles of reactants and products can be used to obtain the mass of products formed. The results obtained are as follows;
The mass of hydrogen produced is 0.0174 gramsThe mass of zinc produced is 0.5688 gramsThe percentage by mass of zinc in the brass alloy is 47.3 %The question says that HCl was in excess. It means that after the reaction, we will have unreacted HCl(aq) and ZnCl2(aq) in the remaining solution.
Hence;
Mass of ZnCl2(aq) formed = 36.309g - 35.123g = 1.186g
Number of moles ZnCl2(aq) formed = [tex]\frac{mass of ZnCl2(aq) formed}{molar mass of ZnCl2}[/tex]
[tex]\frac{1.186g}{136.286 g/mol}[/tex] = 0.0087 moles
From the reaction equation;
[tex]Zn (s) + 2HCl(aq) - > H2(g) + ZnCl2 (aq)[/tex]
To obtain the amount of Zn reacted
1 mole of Zn yields 1 mole of ZnCl2
x moles of Zn yields 0.0087 moles of ZnCl2
x = 0.0087 moles of Zn
a) 1 mole of Zn yields 1 mole of H2
0.0087 moles of Zn yields 0.0087 moles of H2
Mass of H2 = 0.0087 moles of H2 * 2 g/mol = 0.0174 grams
b)
Mass of Zn reacted = 0.0087 moles of Zn * 65.38 grams/mole = 0.5688 grams
c)
Percentage of Zn in the alloy = 0.5688 grams/1.203g * 100 = 47.3 %
https://brainly.com/question/14595258
Why do scientists use models of molecules?
A. To research the known effects of the molecule on the environment
B. To explain how electrons, protons, and neutrons are arranged
C. To show the structure of molecules, which are too small to see
D. To design an experimental setup to synthesize molecules
Answer:
C
Explanation:
How would you change the type of atom
Answer:
Hi, There! :)
If you change the number of protons an atom has, you change the type of element it is. If you change the number of neutrons an atom has, you make an isotope of that element.
Answer:
If you change the number of protons an atom has, you change the type of element it is. If you change the number of neutrons an atom has, you make an isotope of that element. All known elements are arranged on a chart called the Periodic Table of Elements.
Explanation:
that's what I found buddy
Which of these answers describes a scientific law?
(Pls)
Answer:
big ablsolty long pp
Explanation:
dong
Solid solid soluton example
Explanation:
rice and rice coatssalt and sugarsand and mudwheat flour and corn flourwhat are the three formula of mole?
[tex] \huge \boxed{\mathfrak{Formulas} \downarrow}[/tex]
For all[tex] \large \sf \: mole = \frac{mass}{molar \: mass} \\ [/tex]
For gases[tex]\large \sf \:mole = \frac{volume}{molar \: volume} \\ [/tex]
For solutions[tex]\large \sf \:concentration \: ( \frac{g}{ {dm}^{3} } ) \\\large \sf \: = \frac{mass(g)}{volume( {dm}^{3} )} [/tex]
You can substitute mass with mole for concentration (mol/dm³).What is the approximate mass of one electron?
Answer:
9.1093837015 × 10^−31 kg
Very small mass
Vapor pressure of any liquid _______. A. increases with increases in temperature B. increases with decreases in temperature C. is not affected by changes in temperature D. increases with increases in volume of the liquid E. None of the Above
Answer:
increase with increases in temperature
Explanation:
please mark me brainleast
If you burn a citronella candle near your picnic will it keep mosquitoes away
Answer:
Thanks!!!
Explanation:
Answer:
true
Explanation:
pls
answer
pls
pls
its ma homework
Answer:
2 ka A. nitrogen, oxygen, Carbon dioxide
Answer:
no 1 Ans gas
hope it works
Please help me with this chemistry
Answer:
D=1.56g/mL
Explanation:
Density=m/v
D=14.06g/(24mL-15mL)
D=14.06g/9mL
D=1.56g/mL
What are the answers to these?
Answer:
1)physical change
Explanation:
2)chemical change
Which element would most likely lose electrons to form positive ions when bonding with other elements?
rubidium (Rb)
gallium (Ga)
argon (Ar)
iodine (I)
The correct answer to the question is Rubidium (Rb)
Rubidium (Rb) is a group 1 element and as such, it can form bond by losing it's valence electron (i.e 1 electron) easily.
Gallium (Ga) is a group 13 element. It can only form bond by losing it's 3 valence electrons.
Argon is a group 18 element. This group has completely filled outermost shell and are very stable. They do not involve in bond formation.
Iodine (I) is a group 17 element. It is more difficult for this group to lose its 7 valence electrons hence, they form bond by accepting 1 electron.
With the above information, we can conclude that Rubidium will most likely lose electron to form bond.
Learn more: https://brainly.com/question/13178080
Answer:
(Question 1)Which element would most likely lose electrons to form positive ions when bonding with other elements?
(Answer) rubidium (Rb)
(Question 2) Which statement about sodium chloride is correct?
(Answer) The sodium atom transfers electrons to the chlorine atoms to form ionic bonds.
(Question 3) Based on their locations in the periodic table, which two elements are most likely to form covalent bonds with each other?
(Answer) nitrogen (N) and oxygen (O)
(Question 4) Which phrase best describes electronegativity?
(Answer) the relative strength with which an element attracts electrons in a chemical bond
(Question 5) Based on the information in the table, which pair of elements would likely form the least polar bonds with each other?
(Answer) bromine and nitrogen
Explanation:
just finished the quick check enjoy UwU
Classify vodka (composed of 50% water and 50% alcohol).
Answer:
Liquor
Explanation:
May someone help me with the answer to this question I’ve been stuck on it
Explanation:
No, that would be incorrect
Answer:
There arre two main parts of the atom, the nucleus and the orbital rings. The three subatomic particles are contained in each of these, the proton and neutron together in the nucleus and the electrons orbiting in the rings.
In the reaction 2H2 + O2 + H20, what coefficient should be placed in front of H2O to balance the reaction? 0 2 03 O 4
Answer:
2
Explanation:
2×2
2O
soooo
2H2O means 4H2O
Which of the following are decomposition reactions?
A. CH4 (9) +202 (9) - CO2 (g) + 2H20 (9)
B. N2 (9) + 3H2 (9) ► 2NH3 (9)
C. CaCO3 (s) - Cao (s) + CO2 (9)
D. 2H20 (1) ► 2H2 (9) + O2 (9)
Answer:
C and D
Explanation:
A reaction is said to be decomposed, if the reactant is broken down to liberate single element.
