A friend lends you the eyepiece of his microscope to use on your own microscope. He claims that since his eyepiece has the same diameter as yours but twice the focal length, the resolving power of your microscope will be doubled. Is his claim valid? Explain.

Answer:

Explanation:

From the question we are told that:

Number of turns [tex]N=10[/tex]

Area [tex]a=0.23m^2[/tex]

Magnetic field [tex]B=0.947T[/tex]

Generally the equation for maximum flux is mathematically given by

 [tex]\phi=NBa[/tex]

 [tex]\phi=10*0.047*0.23[/tex]

 [tex]\phi=0.1081wbi[/tex]

Therefore induced emf

 [tex]e= \frac{d\phi}{dt}[/tex]

Since

 [tex]t=0[/tex]

Therefore

 [tex]e=0[/tex]

In the historical sense, postmodern society is simply a society that occurs after the modern society. ... Many of the elements of a society like this are reactions to what the modern society stood for: industrialism, rapid urban expansion, and rejection of many past principles.

Answer:

 E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]

Explanation:

For this exercise we use that the electric field is a vector, so the resulting field is

          E_total = E₁ + E₂                      (1)

since the field has the same direction in the space between the planes

Let's use Gauss's law for the electric field of each plate

Let's use a Gaussian surface that is a cylinder with the base parallel to the plate, therefore the normal to the surface and the field lines are parallel and the angle is zero so cos 0 = 1

          Ф  = ∫ .dA = [tex]q_{int}[/tex] /ε₀

if we assume that the charge is uniformly distributed on the plate we can define a charge density

         σ = q_{int} A

as the field exists on both sides of the plate on the inside

          E A = A σ / 2ε₀

          E = σ / 2ε₀

we substitute in equation 1

         E = σ /ε₀

for the complete plate

         σ = Q / A = Q / L²

we substitute

         E = [tex]\frac{Q}{L^2 \epsilon_o}[/tex]

Answer: When a pathogen enters their colony, ants change their behavior to avoid the outbreak of disease. In this way, they protect the queen, brood and young workers from becoming ill. These results, from a study carried out in collaboration between the groups of Sylvia Cremer at the Institute of Science and Technology Austria (IST Austria) and of Laurent Keller at the University of Lausanne, are published today in the journal Science.

Explanation: search for it.

Answer:

The elastic extensibility of a piece of string is .08. If the string is 100 cm long, how long will the string be when it is stretched to the point where it becomes plastic? is your ansewer dont take tension

The string will be 108 cm long when it is stretched to the point where it becomes plastic.

Elasticity in physics and materials science refers to a body's capacity to withstand a force that causes distortion and to recover its original dimensions once the force has been withdrawn.

When sufficient loads are applied, solid objects will deform; if the material is elastic, the object will return to its original size and shape after the weights have been removed. Unlike plasticity, which prevents this from happening and causes the item to stay deformed,

Given parameters:

The elastic extensibility of a piece of string is 0.08.

The string is 100 cm long.

Hence,  it becomes plastic, after  it is stretched up to = 100 × 0.08 cm = 8 cm.  The string will be 108 cm long.

Learn more about elasticity here:

https://brainly.com/question/28790459

#SPJ5

Answer:

No

Explanation:

You could try to give it enough to fill all valence electrons in all of the atoms in the conductor, but practically this could not be achieved.

Answer:

none of those are right, its technically 96.5%. so i would say 97% is your best bet because thats closest and it just rounds up :)

Explanation:

Answer:

The answer is "66.351 N/C"

Explanation:

Given:

[tex]a=1.5\ cm= 1.5 \times 10^{-2}\ m\\\\q_1=3.9\ pc\\\\b=3\ cm\\\\c= 4\ cm\\\\q_2=0 \ pc\\\\[/tex]

Using Gauss Law:

[tex]\oint \vec{E} \cdot \vex{dA}= \frac{Q_{enc}}{\varepsilon_0 }[/tex]

[tex]E \times 4 \pi\ r^2=\frac{Q_{enc}}{\varepsilon_0}\\\\E= \frac{Q_{enc}}{4 \pi\ r^2 \varepsilon_0}= \frac{1}{4 \pi \varepsilon_0} \frac{Q_{enc}}{r^2}= \frac{k_e\ Q_{enc}}{r^2}\\\\[/tex]

                                      [tex]=\frac{9\times 10^{9} \times 3.9 \times 10^{-12}}{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{(2.3\times 10^{-2})^2}\\\\=\frac{35.1\times 10^{-3}\ }{5.29 \times 10^{-4}}\\\\=\frac{35.1\times 10 }{5.29 }\\\\=\frac{351}{5.29 }\\\\=66.351\ \frac{N}{C}[/tex]

Answer:

Current

I think The choose (B)

B. Electric current

Answer:

4.926 L Y 7.389 L

Explanation:

first you calculate the tank volume

V = π[tex](14 cm)^{2}[/tex](10 cm = [tex]12315 cm^{3}[/tex]

then you convert to liters

[tex]12315 cm^{3}[/tex] = 12.315 l

then you calculate the liters of water

2/5(12.35 l) = 4.926 l

finally we calculate the amount without water

12.315 l - 4.926 l = 7.389 l

HERE IS MORE INFORMATION ON THE SUBJECT. THEY REMOVED THE

ENGLISH SITE BUT YOU CAN USE TRANSLATOR

LINK: https://gscourses.thinkific.com/courses/fisicai

Answer:

b

Explanation:

Answer:

no, all substances doesnot conduct heat

Answer:

No, all substances do not conduct heat easily because it depends on the nature of the substance. Some are good conductors of heat and some are bad. Therefore, it depends on their characteristics and their ability to conduct heat.

The bad conductors of heat are water, air, plastic, wood, etc.

Gold, Silver, Copper, Aluminium, Iron, etc. are good heat conductors as well as electrical conductors.

Answer:

Explanation:

increase while mechanical energy remains constant

Answer:

v₂ = 15.24 m / s

Explanation:

This is an exercise in fluid mechanics

Let's write Bernoulli's equation, where the subscript 1 is for the factory pipe and the subscript 2 is for the tank.

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

They indicate the pressure in the factory P₁ = 140000 Pa, the velocity

v₁ = 5.5 m / s and the initial height is zero y₁ = 0

the tank is at a pressure of P2 = 2000 Pa and a height of y₂ = 6.0 m

          P₁ -P₂ + ρ g (y₁ -y₂) + ½ ρ v₁² = ½ ρ v₂²

let's calculate

         140,000 - 2000 + ρ 9.8 (0- 6) + ½ ρ 5.5² = ½ ρ v₂²

         138000 - ρ 58.8 + ρ 15.125 = ½ ρ v2²

         v₂² = 2 (138000 /ρ - 58.8 + 15.125)

         v₂ = [tex]\sqrt{\frac{276000}{\rho } - 43.675 }[/tex]

In the exercise they do not indicate what type of liquid is being used, suppose it is water with

           ρ = 1000 kg / m³

           v₂ = [tex]\sqrt{\frac{276000}{1000} - 43.675}[/tex]

           v₂ = 15.24 m / s

At STP, 1 mole of an ideal gas occupies a volume of about 22.4 L. So if n is the number of moles of this gas, then

n / (19.2 L) = (1 mole) / (22.4 L)   ==>   n = (19.2 L•mole) / (22.4 L) ≈ 0.857 mol

If the sample has a mass of 12.0 g, then its molecular weight is

(12.0 g) / n ≈ 14.0 g/mol

Answer:

1.Emitted primarily through the burning of fossil fuels (oil, natural gas, and coal), solid waste, and trees and wood products. Changes in land use also play a role. Deforestation and soil degradation add carbon dioxide to the atmosphere, while forest regrowth takes it out of the atmosphere.

2.Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.

3.Untreated, heat exhaustion can lead to heatstroke, a life-threatening condition that occurs when your core body temperature reaches 104 F (40 C) or higher. Heatstroke requires immediate medical attention to prevent permanent damage to your brain and other vital organs that can result in death.

4.The loss of solar energy in passing through the atmospheric layers is called the atmospheric deflection. ... The longer the path traversed, the greater the amount of radiant energy depleted. Various processes whereby heat energy is lost through the atmosphere are known as scattering, diffusion, absorption, and reflection.

5.Geothermal energy is renewable because the Earth has retained a huge amount of the heat energy that was generated during formation of the planet. In addition, heat is continuously produced by decay of radioactive elements within the Earth. The amount of heat within the Earth, and the amount that is lost though natural processes (e.g. volcanic activity, conduction/radiation to the atmosphere), are much, much more than the amount of heat lost through geothermal energy production. At any one geothermal field, however, the temperature of the geothermal reservoir or the fluid levels/fluid pressure in the reservoir may decrease over time as fluids are produced and energy is extracted. Produced fluids can be re-injected to maintain pressures, although this may further cool down the reservoir if care is not taken. Over time, it is commonly necessary to drill additional wells in order to maintain energy production as temperatures and/or reservoir fluid pressures decline.

6.Floods, Floodplains, and Flood-Prone Areas. ... Flooding is a result of heavy or continuous rainfall exceeding the absorptive capacity of soil and the flow capacity of rivers, streams, and coastal areas. This causes a watercourse to overflow its banks onto adjacent lands.

The environmental concerns associated with the production of electricity are the release of greenhouse gases, the release of gases that cause acid rain, the release of excess heat, the flooding of land, and the depletion of geothermal energy so, option C is correct.

The presence or movement of charged particles is electricity. The movement of electrons through a circuit is known as an electric current. The accumulation of electrons on an insulator causes static electricity.

Mostly released when solid trash, trees, and wood products are burned, along with fossil fuels (coal, gas, and oil).

Land use changes also have an impact. Carbon dioxide is released into the atmosphere by deforestation and soil erosion, while it is removed from it by forest regeneration.

To know more about electricity:

https://brainly.com/question/29812640

#SPJ2

Answer:

Force = Mass × Acceleration

[tex]{ \tt{force = 2250 \times 4.3}} \\ = { \tt{9675 \: newtons}}[/tex]

Answer:

Weight, acceleration when it falls vertically, are not same as that of earth.

Explanation:

Weight of the object is given by the product of mass of the object and the acceleration due to gravity of the planet.

So, the weight of object is not same as that on earth.

The mass is defined as the amount of matter contained in the object.

So, the mass of the object is same as that of earth.  

The volume of the object is defined as the space occupied by the object.

So, the volume of the object is same as that of earth.  

The density is defined as the ratio of mass of the object to its volume.

So, the density of the object is same as that of earth.  

The acceleration due to gravity on a planet depends on the mass of planet and radius of planet.

So, the acceleration is not same as that of earth.

The color of the object is its characteristic.

It is same as that of earth.

Answer:

(a) the velocity of the shirt is 2.14 m/s

(b) the velocity of the shirt is 5.3 m/s

Explanation:

Given;

initial velocity of the shirt, u = 5.3 m/s

height of the platform above the ground, h = 4.00 m

(a) When the shirt is caught by someone whose hand is 5.20 m from the ground level, the height traveled by the shirt = 5.2 m - 4.0 m = 1.2 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 1.2)\\\\v^2 = 4.57\\\\v= \sqrt{4.57} \\\\v = 2.14 \ m/s[/tex]

(b) When the shirt is caught by someone whose hand is 4.00 m from the ground level, the height traveled by the shirt = 4.00 m - 4.00 m = 0 m

The velocity at this position is calculated as;

[tex]v^2 = u^2 + 2(-g)h\\\\v^2 = u^2 - 2gh\\\\v^2 = 5.3^2 - (2\times 9.8 \times 0)\\\\v^2 = 28.09\\\\v= \sqrt{28.09} \\\\v = 5.3 \ m/s[/tex]

Answer:

Option D. ²²²₉₀Th

Explanation:

Let the unknown be ⁿₘZ. Thus, the equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

Next, we shall determine n, m and Z. This can be obtained as follow:

For n:

226 = 4 + n

Collect like terms

226 – 4 = n

222 = n

n = 222

For m:

92 = 2 + m

Collect like terms

92 – 2 = m

90 = m

m = 90

For Z:

ⁿₘZ => ²²²₉₀Z => ²²²₉₀Th

Therefore, the complete equation becomes:

²²⁶₉₂U —> ⁴₂He + ⁿₘZ

²²⁶₉₂U —> ⁴₂He + ²²²₉₀Th

Thus, the unknown is ²²²₉₀Th

Answer:

The electric potential energy is 6.72 x 10^-11 J.

Explanation:

Potential difference, V = 4.2 x 10^8 V

charge of electron, q = - 1.6 x 10^-19 C

Let the potential energy is U.

U = q V

U = 1.6 x 10^-19 x 4.2 x 10^8

U = 6.72 x 10^-11 J

Answer:

the resulting angular acceleration is 15.65 rad/s²

Explanation:

Given the data in the question;

force generated in the patellar tendon F = 400 N

patellar tendon attaches to the tibia at a 20° angle 3 cm( 0.03 m ) from the axis of rotation at the knee.

so Torque produced by the knee will be;

T = F × d⊥

T = 400 N × 0.03 m × sin( 20° )

T = 400 N × 0.03 m × 0.342

T = 4.104 N.m

Now, we determine the moment of inertia of the knee

I = mk²

given that; the lower leg and foot have a combined mass of 4.2kg and a given radius of gyration of 25 cm ( 0.25 m )

we substitute

I = 4.2 kg × ( 0.25 m )²

I = 4.2 kg × 0.0626 m²

I = 0.2625 kg.m²

So from the relation of Moment of inertia, Torque and angular acceleration;

T = I∝

we make angular acceleration ∝, subject of the formula

∝ = T / I

we substitute

∝ = 4.104 / 0.2625

∝ = 15.65 rad/s²

Therefore, the resulting angular acceleration is 15.65 rad/s²

Explanation:

pls write the full question

Answer:

The right answer is "[tex]\frac{KQ}{r_b_2}[/tex]".

Explanation:

As the outer spherical shell is conducting, so there is no electric field in side from

⇒ [tex]r_b_1 < r < r_b_2[/tex].

So the electric potential at all points inside the conducting shell that from

⇒ [tex]r_b_1<r<r_b_2[/tex]  

and will be similar as well as equivalent to the potential on the outer surface of the shell that will be:

⇒ [tex]v=\frac{KQ}{r_b_2}[/tex]

Thus the above is the right solution.

Answer:

b. approaches zero.

Explanation:

The phenomenon is known as length contraction.

Length contraction is a result of Einstein's special theory of relativity. This theory states that an observer in an inertial frame of reference will observe a decrease in the length of any moving object placed at another inertial frame of reference.

let the length of the train = L

Let the length observed when the train is in motion = L₀

Apply Einstein's special theory of relativity;

[tex]L_0 = L \times \sqrt{1 - \frac{v^2}{c^2} } \\\\where;\\\\v \ is \ the \ velocity \ of \ the \ train\\\\c \ is \ the \ speed \ of \ light\\\\[/tex]

from the equation above, when v = 0, the length observed is equal to the initial length of the train. (L₀ = L)

As the velocity of the train (v) approaches the speed of light (c), the length of the train observed (L₀) becomes smaller than the initial length of the train (L).  (L₀ < L)

Eventually, when v equals c, we will have a square root of zero (0), and the length observed will become zero.  (L₀ = 0)

Thus, the length of this object, as measured by a stationary observer approaches zero

Answer:

[tex]\omega=109.67\ rad/s[/tex]

Explanation:

Given that,

The speed of the ball, u = 34 m/s

The ball is 0.310 m from the elbow joint.

We need to find the angular velocity (in rad/s) of the forearm.

We know that,

[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{34}{0.31}\\\\\omega=109.67\ rad/s[/tex]

So, the required angular velocity of the forearm is 109.67 rad/s.

(B)

Explanation:

Centripetal means "towards the center" so the acceleration vector of an object undergoing UCM is always pointed towards the center.

The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

Centripetal force is the force acting on an object in curvilinear motion directed towards the axis of rotation or center of curvature. The unit of centripetal force is Newton.

Centripetal means "towards the center" so the acceleration vector of an object undergoing circular motion is always pointed towards the center.

Therefore, The acceleration vector of a particle in a uniform circular motion points toward the center of the circle, The correct option is option (b).

To know more about the Centripetal force:

https://brainly.com/question/31417673

#SPJ6

Answer:

BFSkinner enfatizó la importancia de   creía en la importancia de desarrollar la psicología experimental y dejar atrás el psicoanálisis y las teorías acerca de la mente basadas en el simple sentido común.

Explanation:

Answer:

24 meters

Explanation:

Find the final velocity. 12m/s

d=[final-initial]/2×time

D=(6m/s)×4=24 m/s

Answer:

Distance traveled = 3 * 10E8 * 17.2 * 10E-9 = 5.16 m

.81 / 3 * 10E8 = 2.7 * 10E-9    normal time thru glass

(20.8 - 17.2) * E10-9 = 3.6 * 10E-9   additional time due to glass

c tg = c n ta      where tg and ta are the times spent in glass and air

(Note you can also write Va = n Vg  or  D / ta = n D / tg)

n = tg / ta = 3.6 / 2.7 = 1.33 the index of refraction of the glass

Wavelength (air) = Wavelength (glass) * n

Wavelenght = 560 nm / 1.33 = 421 nm