A frictionless pulley system connects a 150 Kg block of a flat surface with a coefficient of friction of 0.20 to a hanging 200 kg block. Determine the tension on the cord, the frictional force of the block on the surface, acceleration of descending block, and time required for a hanging block to full 10 meters.

Answer:

Gravitational potential energy is the maximum at point C and lowest at point A

Explanation:

The image for the question is provide in the attached file

The energy of pendulum is governed by mechanical energy. Mechanical energy is the sum of potential energy and kinetic energy

Potential energy increases with increasing height. Thus, when the pendulum bob is at maximum height, then its potential energy is also the highest.

Thus, At point C, the gravitational potential energy is the highest

At point A, the  gravitational potential energy  is substantial but lower than that of gravitational potential energy at point C

AT point A, gravitational energy is the lowest

Answer: 110000

Explanation:

26/9=30.5555555556

30.5555555556 x 60=1833.33333333

110000 x 60=110000

Answer:

He traveled 9km

Explanation:

To do this problem you need to use the equation which is Speed= distance/time and this problem gives you the speed which is 18 km/h and it gives you the time 1/2 hour so you write the equation 18= d/ 1/2 which his distance is 9km

Answer:

Explanation:

i think the first questions answer is A. amplitude

the second questions answer is also A. transverse wave

Answer:

B. Frequency and transverse

Answer:

4 x 10⁶m/s²

Explanation:

Given parameters:

Initial velocity  = 0m/s

Time  = 0.0001s

Final velocity  = 400m/s

Unknown:

Acceleration of the object  = ?

Solution:

Acceleration is the rate of change of velocity with time;

 Acceleration  = [tex]\frac{Final velocity - Initial velocity }{Time }[/tex]  

 Acceleration  = [tex]\frac{400 - 0}{0.0001}[/tex]   = 4 x 10⁶m/s²

Answer:

time speed accelaration negatives backwards

Explanation:

Answer:

A

Explanation:

The amplitude of a sound wave determines its loudness or volume. A larger amplitude means a louder sound, and a smaller amplitude means a softer sound.

Answer:

the answer is b

Explanation:

Answer:

b

Explanation:

I just did it on a p e x

Answer:

food chain / web lol? was this a question?

Answer:

Filtration is a method for separating an insoluble solid from a liquid. When a mixture of sand and water is filtered: the sand stays behind in the filter paper (it becomes the residue ) the water passes through the filter paper (it becomes the filtrate )

Explanation:

Listo!

Explanation:

1A. The visible light portion of the electromagnetic spectrum shows the rainbow of colors, with violet and blue having shorter wavelengths, and therefore higher energy. At the other end of the spectrum toward red, the wavelengths are longer and have lower energy.

so its option 2

2A. Atom and molecules

PLEASE THANK, RATE AND FOLLOW ME,

AND PLEASE MARK ME AS "BRAINLIEST" ANSWER

HOPE IT HELPS YOU

Answer:

(A) Fossil Fuels

Answer:

Fossil Fuels

Explanation:

That’s what CK12 told me

Answer:

62760J

Explanation:

Given parameters:

Mass  = 0.5kg  = 500g

Initial temperature  = 30°C

Final temperature  = 65°C

Unknown:

How much energy is absorbed by the water  = ?

Solution:

To solve this problem, we use the expression below:

  H  = m C Δt

  H =  m  x C x (t₂ - t₁ )

m is the mass

C is the specific heat  = 4.184J/g°C

t₂ is the final temperature

t₁ is the initial temperature

So;

              H  = 500 x 4.184 x (65  - 30) = 62760J

Answer:

Explanation:

Take for example you place two eggs in the water. One starts to sink and one remains floating. They have the same volume but the one that sinks is cracked just a little, which as soon as it hits the water, water starts to go in the egg. Then that changes the volume of the egg. (I've done this expirement before) It can also be the way you place the object in the water, or one object has been in the water longer. The buoyancy can be the way they are positioned/placed in the water. One may be more absorbant to the water as well.

I hope you understand what I am trying to say.

Answer:   0.0035

============================================

Explanation:

The exponent is -3, so we move the decimal point 3 spots to the left to go from 3.5 to 0.0035

If the exponent was positive, then we would move the decimal point to the right that amount of spaces.

Answer:

8) A hanging 7.5 kg object stretches a spring 1.1 m. What is the spring constant? 1 . 1 66. 82 NIMO 9) A spring has a constant of 875 N/m. What hanging mass will cause this spring to stretch 4.5 m? Iouliply then divide 875 X 4. 2- - (4 04. 7919) 10) A spring with a spring constant of 25 N/m is stretched 65 cm. What was the force used? 11) A 25 N force stretches a spring 280 cm. What was the spring constant? 12) A 75 N force stretches a spring 175 cm. What was the proportionality constant? 8) 66.82 N/m 9) 401.79 kg 10) 16.25 N 11) 8.93 N/m 12) 42.86 N/m

Explanation:

A spring has a constant of 875 N/m. and the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

The spring constant is a characteristic of a spring which is defined as the ratio of the force affecting the spring to the displacement which is caused by that force. The SI unit of spring constant is N.m⁻¹ (Newton per meter).

The spring constant is:

F = -k/ x

where, k is the spring constant

F denotes the force,

and x denotes the change in the length of the spring.

k = 875N/m

x = 4.5m

We know that

Kx = mg

m= kx/ g

m = 875 × 4.5/ 9.8

m = 401.78kg

Therefore, the mass which will cause this spring to stretch 4.5 meters is 401.78 kg.

Learn more about Spring constant here:

https://brainly.com/question/14159361

#SPJ5

Answer:

Newton

Explanation:

The unit of force is Newton and it is given after Sir Isaac Newton for his tremendous works in this regard.

 Force is the product of mass and acceleration of a body.

    Force  = mass x acceleration  

 The unit of mass = kg

                    acceleration  = m/s²

So;

      1N  = 1kgm/s²

Therefore, the unit of force is newtons and 1N is equal to  1kgm/s²

Answer:

The internal energy of a substance is equal to the total amount of potential energy and kinetic energy of ALL the particles in the substance.

For example, when the temperature increases (more temperature means more energy), the kinetic energy of the particles in the substance increases.

And when we reach a point near a change of phase (like near fusion point) there is energy used to break the bonds between the particles, then we have an increase in potential energy.

Then we could write the internal energy as:

U = ∑(KEₙ) + ∑(PEₙ)

Where ∑(KEₙ) and ∑(PEₙ) are the sums of the kinetic energy and potential energy of all the particles in the substance.

The equation that best summarizes the internal energy (U) of a substance that has both kinetic and potential energy is U = ∑(KEₙ) + ∑(PEₙ).

Therefore, equation that best summarizes the internal energy (U) of a substance that has both kinetic and potential energy is U = ∑(KEₙ) + ∑(PEₙ).

Learn more about internal energy at: https://brainly.com/question/11278589

The chemical process which requires energy is breaking bond in KOH and HBr. Hence, option C is correct.

The capacity to perform work is known as energy in physics. Potential, kinematic, thermodynamic, electromagnetic, chemical, nuclear, and other types are all possible.

As energy is transferred through one body to another, there is also heat and work. As a result, heat transfer may result in thermal energy, whereas labor done may result in mechanical power.

As per the given reaction in the question,

KOH + HBr - KBr + H20

Here, in this reaction the chemical process which requires the energy is at the time of breaking of bonds in KOH and HBr at that time the energy is required.

Therefore, it is concluded that breaking bonds in KOH and HBr i.e., option C is correct.

To know more about Energy:

https://brainly.com/question/1932868

#SPJ2

Answer:

because you use more force to push than to pull (well it depends how heavy it is)

Explanation:

Answer:

The answer is D because when the faults move that is the tectonic plates moving. So earth quakes will be forming when the fault moves.

Explanation:

It's none of the above hope this helps

Answer:

The air speeds up, and as it speeds up, its pressure—the force of the air pressing against the side of the object—goes down. ... This means that if the area in which the air is moving narrows or widens, then the air has to speed up or slow down to maintain a constant amount of air moving through the area.

Please give brainliest!!!!

Answer:

financial aid

Explanation:

edge

Earth's rotation and spherical shape cause winds to veer to the right (in the northern Hemisphere) or to the left (in the southern Hemisphere) of the direction they want to go.  This is known as the Coriolis effect.

If you didn't know that you're on a rotating Earth, and you looked at the patterns of the winds, you'd think there's some kind of force that's making the airflow veer to the right or left of the direction it actually wants to go.  This is known as the Coriolis force.  It's a"pseudo force", because it doesn't really exist.  It only LOOKS like it's there, because of the Earth's rotation and spherical shape..

The statement "Earth's rotation causes winds to veer to the west or to the east" is true about the Coriolis effect.

Fluid materials such as wind and ocean currents take different directions depending on the hemisphere, this movement of deviation is called the Coriolis effect.

Therefore, we can conclude that the force that tends to deflect the trajectory of objects moving across the entire earth's surface is known as the Coriolis effect.

Learn more about the Coriolis effect here: https://brainly.com/question/14290551