A foot is 12 inches and a mile is 5280 ft, exactly. A centimeter is exactly 0.01m or mm. Sammy is 5 feet and 5.3 inches tall. What is Sammy's Height in inches?

Answers

Answer 1

The answer is 65.3 inches tall

Explanation:

To know the heigh of Sammy in inches it is necessary to convert the 5 feet to inches and add this number to 5.3 inches as the statement mentions "Sammy is 5 feet and 5.3 inches tall". Additionally, it is known each foot is equal to 12 inches ( 1 foot = 12 inches). According to this, the simplest method to convert feet to inches is to multiply the feet given by 12. The process is shown below:

1 foot  = 12 inches

feet to inches =  number of feet x 12

5 feet x 12 = 60 inches

This means 5 feet is equal to 60 inches. Now, 60 inches + 5.3 inches = 65.3 inches (total height of Sammy in inches)


Related Questions

Which waves move fast Longitudinal waves or Transverse waves and why???

Answers

Answer:

Transverse wave

Explanation:

Its because in transverse wave the particle displacement is perpendicular to the direction of wave propagation..hope it helps you...

An 8.0g bullet, moving at 400 m/s, goes through a stationary block of wood in 4.0 x 10^-4s, emerging at a speed of 100 m/s. (a) what average force did the wood exert on the bullet? (b) how thick is the wood?

Answers

Answer:

Explanation:

Initial velocity (u) of the Bullet = 400 m/sec

Final velocity (v) of the Bullet = 100 m/sec

Bullet passed through the block in (t) = 0.0004 sec  

Using 1st Equation of motion :

400 m/s = 100 m/s - a (0.0004)

Deceleration of Bullet = 750,000 m/sec^2

(a) F (force exerted by the wooden block on the bullet) = F (force exerted by the bullet on the wooden block)

F = m * a = 0.008 * 750,000 = 6000 N

(b) Using 3rd Equation of motion :

[tex]v^{2} = u^{2} - 2aS[/tex]

10000 = 160000 - 2 * 750,000 * S

Thickness of wood (S) = 0.1 m

Can someone please illustrate how the refracted ray will look like?

Answers

Answer

As the angle of incidence increases in Figure 2.8, a point is finally reached where the refracted ray does not emerge at the second layer but lie along the interface. This particular angle of incidence at which the angle of refraction is 90° and the refracted ray lies along the interface is known as the critical angle. At and beyond the critical angle, there is no transmitted ray and therefore a very high reflected ray will be recorded .

Therefore,

sinθisin90=Vp1Vp2

But, sin 90 = 1.

At critical angle,

sinθcritical=Vp1Vp2

A critical refracted wave travels along the interface between layers and is refracted back into the upper layer at the critical angle. The waves refracted back into the upper layer are called head waves or first-break refractions because at certain distances from a source, they are the first arriving energy. Recorded first-break refraction is shown in Figure 2.10.

Note that these first-break refractions can give us important information about the shallow velocities on land seismic data.

Note also that seismic data are acquired in such a way that reflections from horizons of interest are in the pre-critical region, even at the farthest offset in the data.

In reality, part of the seismic energy arriving at an interface is transmitted and refracted, and another part of the energy is reflected at that same interface. Given that there are many reflectors in the subsurface, there will be many paths from source to receiver, each of them with a different travel time. The proportion of energy reflected depends on the material properties of the two bounding layers and on the angle of incidence

Velocity is a description of an object’s _____.

Answers

Answer:

speed

Explanation:

wholesale market definition​

Answers

Answer:

Wholesale Market. 1. The market for the sale of goods to a retailer. That is, a wholesaler receives large quantities of goods from a manufacturer and distributes them to stores, where they are sold to consumers. ... The market for the sale of securities to institutional investors rather than individuals.

Which of the following best describes a consumer?
0. a business owner who sells clothes
0. someone who studies economics
O. a farmer who sells his crops
O. a person who buys goods and services

Answers

Answer:

a business who buys goods and services

Determine the magnitude of the force that must be applied to a wooden block whose weight has a magnitude of 8N, so that it acquires an acceleration of 0.5 m / s²

Answers

Answer:

0.4 N

Explanation:

The weight mg is 8 N, so the mass is:

mg = 8 N

m = 8 N / g

m = 8 N / (10 m/s²)

m = 0.8 kg

The force needed to accelerate it to 0.5 m/s².

F = ma

F = (0.8 kg) (0.5 m/s²)

F = 0.4 N

In no more than five simple statements, use the kinetic theory to explain why an iron bar expands when it is heated.

Answers

Answer:

Iron expands because heating increases the space between the molecules

Explanation:

According to the kinetic molecular theory, all matter is composed of atoms and molecules which are in constant motion.

When a substance is heated, molecules of the substance begin to vibrate faster. This faster vibration leads to increased space between the molecules (expansion) . The kind of motion motion and degree of spacing of the molecules determine the state of matter in which the substance is found.

Hence, when an iron bar is heated, it expands due to increased motion of its molecules leading to spaces between them.

Light travels at a speed of 2.998*108 m/s. Light takes approximately 3.25 minutes to travel from the Sun to reach a planet. Calculate the distance from the Sun to this planet in meters. Give your answer to 0 decimal places.

Answers

Answer:

585×10⁸ m

Explanation:

Distance = rate × time

d = (2.998×10⁸ m/s) (3.25 min) (60 s/min)

d = 585×10⁸ m

fill in the blanks

1.)Seed drill is used for ____ of the seeds.

2.)ploughing helps the_____of roots of the growing plants.

3.)Tilling of the soil is also called a ________.

4.)Manure and fertilizers are use ti maintain the______of the soil.

5.)A most common weedicide is________.

6.)After harvesting,grains are separated from the chaffand hay by _______ or by using ______.

7.)The economial methods of irrigation are_____and____.

8.)The wild plants which grow along with the main crop are called_________.

9.) Shifting of tiny plants from a nursery to the main field is called______.

10.) Excess water and wet soil do not permit proper_____of the seeds or roots of the plants.​

Answers

Answer:

1.) Sowing

2.) Respiration

3.) Soil preparation or cultivation or ploughing

4.) Fertility

5.) 2, 4 -D

6.) winnowing threshers

7.) Surface irrigation and sprinkler irrigation

8.) Weeds

9.) Transplantation

10.) Aeration

Explanation:

1.) Seed drill sows crop seed

2.) Ploughing assist in the respiration and penetration of the roots of a growing plants

3.) Tilling the soil is breaking of the soil lumps and turning of the soil

4.) Manure and fertilizers supply nutrient to the soil for the uptake by plant in food production

5.) 2, 4 -D are a range of weedicide containing 2,4-D as the active ingredient

6.) Winnowing is the separation of grain from straw

Threshers remove seeds from husks and stalks

7.) Surface irrigation -gravity enables the flow of the water

and sprinkler irrigation- Use of preset tools for irrigation

8.) Weeds are the unwanted, in situ, growing plants close to the crops

9.) Transplantation is the method of relocating plants

10.) Excess water limits access of the roots and seeds to atmospheric oxygen

6. Match the statements given in column 'A' with those in column 'B':
alse, (un) False, (ve
Column A
1. Urea
2. Combines
3. Silos
4. Seed drills
5. Irrigation
6. Tilling
Column 'B'
(a) Sowing of seeds
(b) Storage of grains
(c) Harvesting and threshing
(d) Fertilizer
(e) Preparation of soil
(f)Sprinklers​

Answers

Answer:

1. Urea,                    (d)Fertilizer

2. Combines,          (c) Harvesting and threshing

3. Silos,                   (b) Storage of grains

4. Seed drills,          (a) Sowing seeds

5. Irrigation,             (f) Sprinklers

6. Tilling,                  (e) Preparation of soil

Explanation:

1) Urea is a widely used and important fertilizer in the agricultural industry

2) The combine harvester combines three categories of harvesting grain drops such as threshing reaping and winnowing

3) Silos are used to store grains

4) A seed drill is a seed planting mechanism for burying seeds to a particular depth during seed planting

5) Irrigation is the application of required volume of water to plants

6) Tilling is the digging, turning, and staring operations meant to prepare the soil.

what energy is used when we drink a sip of juice?​

Answers

Answer:

mechanical energy or chemical energy

Express the time spent to daily life activities during holidays as a fraction of whole day 1. Represent the fractions in pictorial form. 2. Write the fractions in simplest form. 3. Arrange them in ascending order.

Answers

Answer:

(II). The fractions in simplest form

[tex]\dfrac{31}{35}[/tex], [tex]\dfrac{91}{165}[/tex] and [tex]\dfrac{13}{5}[/tex]

(III). The fractions in ascending order

[tex]\dfrac{91}{165}<\dfrac{31}{35}<\dfrac{13}{5}[/tex]

Explanation:

Given that,

(I). Represent the fractions in pictorial form

(II). Write the fractions in simplest form.

(III). Arrange them in ascending order.

Suppose, The fractions in pictorial form

(a). [tex]\dfrac{3}{5}+\dfrac{2}{7}[/tex]

(b). [tex]\dfrac{9}{11}-\dfrac{4}{15}[/tex]

(c). [tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}[/tex]

We need to write in simplest form

Using given fraction

(a). [tex]\dfrac{3}{5}+\dfrac{2}{7}=\dfrac{3\times7}{5\times7}+\dfrac{2\times5}{7\times5}[/tex]

[tex]\dfrac{3}{5}+\dfrac{2}{7}=\dfrac{21}{35}+\dfrac{10}{35}[/tex]

[tex]\dfrac{3}{5}+\dfrac{2}{7}=\dfrac{21+10}{35}[/tex]

[tex]\dfrac{3}{5}+\dfrac{2}{7}=\dfrac{31}{35}[/tex]

(b). [tex]\dfrac{9}{11}-\dfrac{4}{15}=\dfrac{9\times15}{11\times15}-\dfrac{4\times11}{15\times11}[/tex]

[tex]\dfrac{9}{11}-\dfrac{4}{15}=\dfrac{135-44}{165}[/tex]

[tex]\dfrac{9}{11}-\dfrac{4}{15}=\dfrac{91}{165}[/tex]

(c). [tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}=\dfrac{7}{10}+\dfrac{2\times2}{5\times2}+\dfrac{3\times5}{5\times2}[/tex]

[tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}=\dfrac{7}{10}+\dfrac{4+15}{10}[/tex]

[tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}=\dfrac{7+4+15}{10}[/tex]

[tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}=\dfrac{26}{10}[/tex]

[tex]\dfrac{7}{10}+\dfrac{2}{5}+\dfrac{3}{2}=\dfrac{13}{5}[/tex]

We need to arrange them in ascending order

Using simplest form

The simplest fraction in ascending order

[tex]\dfrac{91}{165}<\dfrac{31}{35}<\dfrac{13}{5}[/tex]

Hence, This is required solution.

Will mark as BRAINLIEST.......

The Displacement x of particle moving in one dimension under the action of constant force is related to the time by equation 4x³+3x²-5x+2 , where x is in meters and t is in sec.
a)Find velocity of particle at i) t=2 sec ii) t=4 sec.
b) Find the acceleration of the particle at t=3 sec.

Answers

Explanation:

It is given that,

The Displacement x of particle moving in one dimension under the action of constant force is related to the time by equation as:

[tex]x=4t^3+3t^2-5t+2[/tex]

Where,

x is in meters and t is in sec

We know that,

Velocity,

[tex]v=\dfrac{dx}{dt}\\\\v=\dfrac{d(4t^3+3t^2-5t+2)}{dt}\\\\v=12t^2+6t-5[/tex]

(a) i. t = 2 s

[tex]v=12(2)^2+6(2)-5=55\ m/s[/tex]

At t = 4 s

[tex]v=12(4)^2+6(4)-5=211\ m/s[/tex]

(b) Acceleration,

[tex]a=\dfrac{dv}{dt}\\\\a=\dfrac{d(12t^2+6t-5)}{dt}\\\\a=24t+6[/tex]

Pu t = 3 s in above equation

So,

[tex]a=24(3)+6\\\\a=78\ m/s^2[/tex]

Hence, (a) (i) v = 55 m/s (ii) v = 211 m/s and (b) 78 m/s²

Which is the second step of the fusion process?
O
H+1H - ?H+e+ + v + energy
O 6(3H) +21_e) - He +24H) + energy + 2u
{H+1H He + energy
O
He He He + 1H+1H + energy

Answers

Answer:

The correct option is;

[tex]_{1}^{2}\textrm{He} + _{1}^{1}\textrm{H} \rightarrow _{3}^{2}\textrm{He} + energy[/tex]

Explanation:

The second step of the fusion process is the reaction (combination) where a Deuterium combines with a hydrogen to produce one helium 3, 3He, nucleus and a energy photon as follows;

[tex]_{1}^{2}\textrm{He} + _{1}^{1}\textrm{H} \rightarrow _{3}^{2}\textrm{He} +\gamma \ (energy)[/tex]

After which the produced Helium-3 combines to form the Helium nucleus an emit 2 protons

Steps 1 and 2 are take place two times (producing 26 MeV energy) before the step three (the combination of the formed helium-3) takes occurs.

Answer:

C on edge

Explanation:

Just did it and got it right :)

If the mass of a ball is 50g on a height of 8m. Calculate the kinetic energy when it has a velocity of 3m/s.​

Answers

Answer:

kinetic energy is 1/2mv^2.

which is 1/2×0.05×3^2

1/2×0.05×9.

1/2×0.45=

0.45÷2=0.225~0.23J

Una partícula se mueve en el plano XY efectúa un desplazamiento mientras actúa sobre ella una fuerza constante. X= (4i + 3j) m, F = (16i + 12j) N a) Calcule la magnitud del desplazamiento y la de la fuerza. B) Calcule el trabajo realizado por la fuerza F c) Calcule el ángulo entre F y x.

Answers

Answer:

a) La magnitud del desplazamiento es de 5 m

La magnitud de la fuerza es 20 N

b) El trabajo realizado por la fuerza es de 100 J

c) El ángulo entre la fuerza y el plano es 0 °

Explanation:

a) La magnitud del desplazamiento se encuentra por la relación;

[tex]\left | X \right | = \sqrt{X_{x}^{2}+X_{y}^{2}}[/tex]

Lo que da;

[tex]\left | X \right | = \sqrt{4^{2}+3^{2}} = 5 \ m[/tex]

De manera similar, la magnitud de la fuerza, F, se encuentra como sigue;

[tex]\left | F \right | = \sqrt{F_{x}^{2}+F_{y}^{2}}[/tex]

Lo que da;

[tex]\left | F \right | = \sqrt{16^{2}+12^{2}} = 20 \ N[/tex]

b) El trabajo, W, realizado por la fuerza = Fuerza, F × Distancia, X

∴ Ancho = 20 N × 5 m = 100 N · m = 100 J

c) La dirección de la fuerza viene dada por la siguiente fórmula;

[tex]tan^{-1} \left (\dfrac{F_y}{F_x} \right ) = tan^{-1} \left (\dfrac{12}{16} \right ) = 38.9^{\circ}[/tex]

La dirección del plano viene dada por la siguiente fórmula;

[tex]tan^{-1} \left (\dfrac{X_y}{X_x} \right ) = tan^{-1} \left (\dfrac{3}{4} \right ) = 38.9^{\circ}[/tex]

Por tanto, el ángulo entre la fuerza y el plano = 0 °

La fuerza actúa a lo largo del plano.

Tita= 55°
Answer and proper explanation pls in English​

Answers

Answer:

the photo is a bit blur

A laser beam is incident on two slits with a separation of 0.210 mm, and a screen is placed 5.05 m from the slits. If the bright interference fringes on the screen are separated by 1.59 cm, what is the wavelength of the laser light?

Answers

Answer:

0.66*10^-6m

Explanation:

We know that the bright fringes are placed on the screen as follows

Ym= m*(lambda xL/d)

But we are given

L= 5.05

Deta Y= 1.59

d = 0.21

1.59* 10^-2m= lambda * 5.05m/2.1*10^-4m

So lambda=

1.59* 10^-2m x 2.1*10^-4m/ 5.05m

= 0.66*10^-6m

The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, ℓ, what combination of g and ℓ must the period be proportional to? (Acceleration has SI units of m • s-2.)

Answers

Answer: √(L/g)

Explanation:

Here we only work with the units:

The unit of the period is units of time, so we have:

[T] = [s]

Now, the units of the length of the pendulum are units of distance:

[L] = [m]

And the units of the acceleration are:

[g] = [m/s^2]

Now, we want to work with those two in such way that the end result is only in seconds.

First, we can see that in g we have seconds square, so we know that we should use a square root.

Then we can divide L by g in order to remove the distance unit, and to have the time unit in the numerator

[L/g] = [m*s^2/m] = [s^2]

Now we apply the square root:

[√(L/g)] = [√s^2] = [s]

Then the combination is: √(L/g)

T = k*√(L/g)

where k is the constant of proportionality.

element x has two isotopes: x-27 and x-29. x-27 has an atomic mass of 26.975 and a relative abundance of 82.33%, and x-29 has an atomic mass of 29.018 and a relative abundance of 17.67%. calculate the atomic mass od element x. show your work

Answers

Answer:

27.336

Explanation:

The atomic mass is the weighted average of the atomic masses of the isotopes.  Simply multiply each isotopes's atomic mass by its relative abundance, then sum the results.

m = 0.8233 × 26.975 + 0.1767 × 29.018

m = 27.336

You and your family are going on a trip in Europe. Calculate the speed in the following scenario. State how you calculated your answer and include correct units. A car travels 240 kilometers in 3 hours; What is the speed of the car during that time?

Answers

Answer:

22.2 m/s or 80 km/h

Explanation:

Given that

Distance travelled by the car, d = 240 km

Time taken by the car, t = 3 hours.

Speed of the car, v = ? m/s

for easy calculations, we will be converting the units to meters and seconds respectively.

240 km to meters would be

240 * 1000 m = 240000 m

3 hrs to seconds would be

3 * 60 mins * 60 seconds = 10800 s

now, we have our distance and time to be

d = 240000 m

t = 10800 s

speed is defined as the ratio of distance with respect to time taken, effectively,

Speed = distance/time

speed, v= 240000 / 10800

v = 22.2 m/s

therefore, the speed of the car during the time is 22.2 m/s, or if the speed is needed in km/h, we can convert it

22.2 * 3600/1000 =

80 km/h

how do you find average velocity

Answers

Answer:

find the sum of the inital and final velocitys and divide by 2 to find the average

If the spring constant is 10 N/m and the spring is stretched 1 m, what is the Force?

Answers

Answer:

10N

Explanation:

Applying the Hooke law:

F = kx

F: Force

k: stiffness coefficient

x: stretched distance

F = 10N/m x 1m = 10N

What is necessary for a ball to be in translational equilibrium?

Answers

Answer:

In order to be in translational equilibrium, the net force (sum of the forces) must be 0.

Distinguish between concave mirror and convex mirror ​

Answers

Answer:

Concave mirror makes someone looking at it look dwarf or short, while convex mirror stretches the person making the person look weird.

A magnet pulls a piece of iron with a force of 1 N. What is the force that the iron piece exerts on the magnet?
The iron piece exerts a force of 1 N divided by the ratio of the weight of the iron piece to the weight of the magnet in the same direction.
The iron piece exerts a force of 1 N on the magnet in the opposite direction.
The iron piece exerts a force of 1 N divided by the ratio of the weight of the iron piece to the weight of the magnet in the opposite direction.
The iron piece exerts a force of 1 N on the magnet in the same direction.

Answers

Answer:

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Explanation:

In this exercise they give us the force exerted by a magnet on an iron bar and ask us the force that the iron bar exerts on the magnet. We can see that these are action and reaction forces, which by Newton's third law must be of equal magnitude and opposite direction, each applied to one of the bodies.

the final statements the correct one is. The second

The iron piece exerts a force of 1 N on the magnet in the opposite direction

Self-Check
por Learning
A truck mass 8000 kg and a car a mass 1000
kg are travelling at the same velocity. Which one has greater kinetic energy ? Why?​

Answers

Answer:

K.E of truck > K.E of car

Explanation:

Mass of the truck = 8000Kg

K.E=[tex]\frac{1}{2} mv[/tex]

K.E =[tex]\frac{1}{2}*8000*v\\ 4000v[/tex]

Mass of the car = 1000 Kg

K.E of the car =[tex]\frac{1}{2}*1000*v\\ 500v[/tex]

Therefore Kinetic energy of the truck is greater than that of the car

A 5000 g toy car starts from rest and moves a distance of 300 cm in 3 s under the action of a single constant force. Determine the magnitude of the force? help good answer please

Answers

Answer:

3.33 N

Explanation:

First, find the acceleration.

Given:

Δx = 3 m

v₀ = 0 m/s

t = 3 s

Find: a

Δx = v₀ t + ½ at²

3 m = (0 m/s) (3 s) + ½ a (3 s)²

a = ⅔ m/s²

Use Newton's second law to find the force.

F = ma

F = (5 kg) (⅔ m/s²)

F ≈ 3.33 N

Monochromatic light shines on the cathode in a photoelectric effect experiment, causing the emission of electrons. If the frequency of the light stays the same but the intensity of the light shining on the cathode is increased:_________

a. The emitted electrons will be moving at a higher speed.
b. There will be more electrons emitted.
c. Neither A nor B are true.
d. Both A and B are true

Answers

Answer:

b. There will be more electrons emitted.

Explanation:

In photoelectric emission, the energy of the emitted electron is dependent on the frequency of the wave incident on the plate; but not the intensity. The rate of electron emission per unit time however depends on the intensity of the incident light. So increasing the intensity of the light at constant frequency will only affect the number of electrons emitted per unit time.

Other Questions
Please help need help asap please Solve the equation for x If a group of individuals diagnosed with personality disorder were found to believe that their socially destructive actions should have yielded neutral or positive social results with those around them, it would best support which personality theory pls help:Find all the missing elements: Y is the midpoint of XZ. If XZ = 8x 2 and YZ = 3x + 3, find x. A solution is known to contain only one type of cation. Addition of Cl1- ion to the solution had no apparent effect, but addition of (SO4)2- ion resulted in a precipitate. Which cation is present Suppose that 1% of the employees of a certain company use illegal drugs. This company performs random drug tests that return positive results 99% of the time if the person is a drug user. However, it also has a 2% false positive rate. The results of the drug test are known to be independent from test to test for a given person. a) Steve, an employee at the company, has a positive test. What is the probability that he is a drug user? b) Knowing he failed his first test, what is the probability that Steve will fail his next drug test? c) Steve just failed his second drug test. Now, what is the probability that he is a drug user? It would require ? Liters of water to dissolve 36 grams of the substance. What were your firstthoughts at the endof the story?The Sniper by Liam OFlaherty which two bases bond together in DNA Humans learn languages best in their childhood. In fact, some research indicates that if a child doesn't learn to speak a formal language before the age of 6, they may never learn to speak well at all. This would best illustrate which of the following?a. Critical periodb. Normative age graded changesc. Individual differencesd. Cultural specificity Following is a portion of the regression output for an application relating maintenance expense (dollars per month) to usage (hours per week) for a particular brand of computer terminal.ANOVA df SS MS F Significance FRegression 1 1575.76Residual 8 349.14Total 9 1924.90 Coefficient Standard Error t Stat P-value Intercept 6.1092 0.9361Usage 0.8931 0.149A) Write the estimated regression equation (to 4 decimals).B) Use a t test to determine whether monthly maintenance expense is related to usage at the .05 level of significance (to 2 decimals, if necessary).1. Reject the null hypothesis 2. Do not reject the null hypothesis C) Monthly maintenance expense______to usage. 1. Is related 2. Is not related D) Did the estimated regression equation provide a good fit?1. yes 2. no E) Explain. 1. If money , fear or peoples judgements were not factors, what I wish to BE in my life?2. If money , fear or peoples judgements were not factors, what I wish to DO in my life?3. If money , fear or peoples judgements were not factors, what I wish to HAVE in my life? The fins attached to a heat exchanger-surface are determined to have an effectiveness of 0.9. Do you think the rate of heat transfer from the surface has increased or decreased as a result of the addition of these fins? draw or define superior and inferior. give and example (anatomy) How to find probability from cumulative frequency graph Company XYZ, has the following capital structure:Debt $50MCommon $30MPreferred of $20MPrice of 5-year, par value 6% annual coupon Bonds that sell today for $1,050.Preferred dividend in year 1 of $5 and a preferred stock price of $90.Common stock has a required return of 12%Tax rate is 40%Solve for the Company WACC? Which of the following is the balanced reaction, given the rate relationships below.a. rate = 13 [CH4] t = 12 [H2O] t = [CO2] t = 14 [CH3OH] t b. rate = 12 [N2O5] t = 12 [N2] t = 15 [O2] t c. rate = 12 [H2] t = 12 [CO2] t = [O2] t = 12 [H2CO3] t 5. When looking at a map, a student realizes that Birmingham is nearly due west of Atlanta, and Nashville is nearly due north of Birmingham. If the distance from Atlanta to Birmingham is roughly 150 mi, and the distance from Birmingham to Nashville is roughly 200 mi, what is the estimated distance from Atlanta to Nashville? 27.Charlotte Bront Linens Warehouse carries a $1,239,500 inventory. Charlotte Bront Linensestimates the annual cost of carrying the inventory at 32% of the inventory value. What isthe approximate annual cost of carrying the inventory?