Answer:
5.59 L
Points earned on this question: 4
Explanation:
took the test
The new volume of the sample of gas when the temperature is increased from 298 K to 333 K is 5.59 L
Charles' lawCharles' law states as follow:
V₁ / T₁ = V₂ / T₂
Where
V₁ is the initial volume T₁ is the initial temperature V₂ is the new volume T₂ is the new temperature How to determine the new volumeFrom the question given above, the following data were obtained
Initial volume (V₁) = 5 LInitial temperature (T₁) = 298 KNew temperature (T₂) = 333 KNew Volume (V₂) =?V₁ / T₁ = V₂ / T₂
5 / 298 = V₂ / 333
Cross multiply
298 × V₂ = 5 × 333
Divide both side by 298
V₂ = (5 × 333) / 298
V₂ = 5.59 L
Learn more about gas laws:
https://brainly.com/question/6844441
What is the chemical formula of calcium chloride?
A.
CaCl
B.
Ca2Cl2
C.
Ca2Cl
D.
CaCl2
Answer:
D
Explanation:
calicium exchange valency of 2 with 1 valency of chlorine
Which equation represents positron decay?
Answer: 4
Explanation:
I found it online
Por qué razón se fomentó la inmigración Europea?
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
Hola aquí va la respuesta!
Se fomentó la inmigración europea porque la economía no era buena y vinieron a Paraguay para mejorar su situación.
Where does photosynthesis start?
Answer:
Have a nice day :)
Explanation:
the chloroplast
Photosynthesis occurs in the chloroplast, an organelle specific to plant cells. The light reactions of photosynthesis occur in the thylakoid membranes of the chloroplast. Electron carrier molecules are arranged in electron transport chains that produce ATP and NADPH, which temporarily store chemical energy.
helppppp meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Answer:
The industry represented in the photo is most likely fishing. Other industries that rely on accurate weather forecasts are shrimping, fishery, and aquaculture
Explanation:
If the universe is expanding but the expansion is slowing down, what will the eventual
death of the universe be? *
Reaction of hypochlorous acid and ammonia is product-favored system at equilibrium. Answer A: Reaction of hypochlorous acid and ammonia is product-favored system at equilibrium. A Reaction of hypochlorous acid and ammonia is reactant-favored system at equilibrium. Answer B: Reaction of hypochlorous acid and ammonia is reactant-favored system at equilibrium. B Reaction of hypochlorous acid and ammonia yields pH 7.00. Answer C: Reaction of hypochlorous acid and ammonia yields pH 7.00. C No reaction occurs between hypochlorous acid and ammonia. Answer D: No reaction occurs between hypochlorous acid and ammonia. D Further data are needed to draw a conclusion about a prospective reaction.
Answer:
A. True
B. False
Explanation:
Reaction between hypochlorous acid and ammonia does not yields a Ph value of 7.00 , this value is defined to water and no other reaction can yield exactly this Ph value. The acid reaction will give a Ph value below 7 while a base reaction will give Ph value of above 7.
Based upon the following diagram, propose a possible identity for atoms X and Y. Explain your answer in terms of the periodic table and ionic bonding. Lastly, explain why the atoms bond in this ratio.
Answer:
Up until now we have been discussing only the elemental forms of atoms which are neutrally charged. This is because the number of electrons (negative in charge) is equal to the number of protons (positive in charge). The overall charge on the atom is zero, because the magnitude of the negative charge is the same as the magnitude of the positive charge. This one-to-one ratio of charges is not, however, the most common state for many elements. Deviations from this ratio result in charged particles called ions.
Throughout nature, things that are high in energy tend to move toward lower energy states. Lower energy configurations are more stable, so things are naturally drawn toward them. For atoms, these lower energy states are represented by the noble gas elements. These elements have electron configurations characterized by full s and p subshells. This makes them stable and unreactive. They are already at a low energy state, so they tend to stay as they are.
The elements in the other groups have subshells that are not full, so they are unstable when compared to the noble gases. This instability drives them toward the lower energy states represented by the noble gases that are nearby in the periodic table. In these lower energy states, the outermost energy level has eight electrons (an “octet”). The tendency of an atom toward a configuration in which it possesses eight valence electrons is referred to as the “Octet Rule.”
There are two ways for an atom that does not have an octet of valence electrons to obtain an octet in its outer shell. One way is the transfer of electrons between two atoms until both atoms have octets. Because some atoms will lose electrons and some atoms will gain electrons, there is no overall change in the number of electrons, but with the transfer of electrons the individual atoms acquire a nonzero electric charge. Those that lose electrons become positively charged, and those that gain electrons become negatively charged. Recall that atoms carrying positive or negative charges are called ions. If an atom has gained one or more electrons, it is negatively charged and is called an anion. If an atom has lost one or more electrons, it is positively charged and is called a cation. Because opposite charges attract (while like charges repel), these oppositely charged ions attract each other, forming ionic bonds. The resulting compounds are called ionic compounds.
The second way for an atom to obtain an octet of electrons is by sharing electrons with another atom. These shared electrons simultaneously occupy the outermost shell of both atoms. The bond made by electron sharing is called a covalent bond. Covalent bonding and covalent compounds will be discussed in Chapter 4 “Covalent Bonding and Simple Molecular Compounds”.
At the end of chapter 2, we learned how to draw the electron dot symbols to represent the valence electrons for each of the elemental families. This skill will be instrumental in learning about ions and ionic bonding. Looking at Figure 3.1, observe the Noble Gas family of elements. The electron dot symbol for the Nobel Gas family clearly indicates that the valence electron shell is completely full with an octet of electrons. If you look at the other families, you can see how many electrons they will need to gain or lose to reach the octet state. Above, we noted that elements are the most stable when they can reach the octet state. However, it should also be noted that housing excessively high negative or positive charge is unfavorable. Thus, elements will reach the octet state and also maintain the lowest charge possible. You will note that for the IA, IIA, IIIA and transition metals groups, it is more economical to lose electrons (1-3 electrons) from their valence shells to reach the octet state, rather than to gain 5-7 electrons. Similarly main group columns VA, VIA, and VIIA tend to gain electrons (1-3) to complete their octet, rather than losing 5-7 electrons. Some atoms, like carbon, are directly in the middle. These atoms don’t like to gain or lose electrons, but tend to favor the sharing model of chemical bonding. The remaining sections of this chapter will focus on the formation of ions and the resulting ionic compounds.
Explanation:
what is the weight in grams of 1 mole of ammonium sulfate (NH4)2SO4
Answer:
The molar mass of one molecule of ammonium sulfate (NH4)2 SO4 132.14 grams per mole
Answer: 132.15 g
Explanation:
If this question is from a mastery test on Edmentum, I just took it and this was the correct answer
What is the frequency of a photon with an energy of 3.26 x 10-19 J?
A. 2.03 x 1014 Hz
B. 4.92 x 1014 Hz
c. 6.10 * 1014 Hz
ОС
D. 5.69 x 1014 Hz
Answer:
B.
[tex]from \: eisteins \: energy \: relation : \\ E = hf \\ h \: is \: plancks \: constant\\ 3.26 \times {10}^{ - 19} = 6.63 \times {10}^{ - 34 } \times f \\ f = \frac{3.26 \times {10}^{ - 19} }{6.63 \times {10}^{ - 34} } \\ f = 4.92 \times {10}^{14} \: Hz[/tex]
What is the safe way to dispose of a compound containing mercury?
Answer:
Put the items that contains mercury in a zipper top bag and seal the bag. Place the sealed bag in a plastic container with a lid. Pack the container with kitty litter or newspapers to prevent breakage. Make sure the container is labeled “Mercury: Do Not Touch.”
Explanation:
How did the first plants and animals arrive in Hawaii, before humans?
Mass x height x gravity is the formula to calculate:
Answer:
Potential energy
Explanation:
[tex]p.e = mgh[/tex]
Si se hace reaccionar CH3CH3 (etano) con cloro, en presencia de luz ultravioleta, los productos obtenidos en este paso son
Answer:
La reacción de etano, CH₃CH₃ y cloro, Cl₂ en presencia de luz solar se conoce como reacción de halogenación.
Los radicales de cloro se forman cuando el cloro se expone a la luz solar a continuación;
Cl₂ → 2Cl *
Se forma un radical etano cuando el etano, C₂H₆ reacciona con un radical libre de cloro, Cl *, como sigue;
C₂H₆ + Cl → C₂H₅ * + HCl
Se forma un producto halogenado cuando un radical libre de etano reacciona con una molécula de cloro como sigue;
C₂H₅ * + Cl₂ → C₂H₅Cl + Cl *
Un producto halogenado puede reaccionar además con un radical libre para producir como sigue;
C₂H₅Cl + Cl * → C₂H₅Cl₂
Explanation:
How does adding heat energy affect magnesium fluoride (MgF2) molecules?
O A The motion of the molecules decreases.
o
B. The motion of the molecules increases.
O
C. The motion of the molecules is at a constant rate.
D. The motion of the molecules stops.
Answer:
Number B is Answer. The motion of the molecules increases
What is the molarity of a 750 milliliters solution containing 54.0 grams of KBr (help me please)
Answer: The molarity of KBr solution is 0.605 M
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Given mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Given mass of KBr = 54.0 g
Molar mass of KBr = 119 g/mol
Volume of the solution = 750 mL
Putting values in equation 1, we get:
[tex]\text{Molarity of solution}=\frac{54.0\times 1000}{119\times 750}\\\\\text{Molarity of solution}=0.605M[/tex]
Hence, the molarity of KBr solution is 0.605 M
Please help it’s due today
Estimate the heat evolved when 74.6 g of sulfur dioxide (molar mass = 64.07 g/mol) is
converted to sulfur dioxide for the given thermochemical equation.
SO2(g) + 12 O2(g)
SO3(g)
AH = -99.1 kJ/mol
The heat evolved when 74.6 g of sulfur dioxide (molar mass = 64.07 g/mol) is 2838kJ/mol. For the given thermochemical equation.
SO2(g) + 12 O2(g)
SO3(g)
AH = -99.1 kJ/mol
What is thermochemical equation ?A balanced stoichiometric chemical equation known as a thermochemical equation contains the enthalpy change, ΔH.
There are two types of thermochemical reaction:
Thermogenic Reaction. certain thermochemical processes that absorb heat. Enthalpy change for this reaction is favorable.
Heat-producing Reaction. Exothermic reactions are those in which energy or heat are released during the reaction.
A chemical equation shows the initial molecule, reactants, and final products separated by an arrow, but a thermochemical equation is a balanced stoichiometric chemical reaction that also includes the enthalpy change.
Thus, 2838 kJ/mol heat evolved in given equation.
To learn more about thermochemical equation refer the link below;
https://brainly.com/question/10023358
#SPJ2
Bacterial pathogens are grown in devices using a __________ developed to optimize the yield of the antigen while maintaining it's integrity.
Answer:
growth medium
Explanation:
The pathogenic bacteria are the bacteria which causes diseases. They may include fungi, worms, protozoa, viruses, bacteria, etc.
The bacterial pathogens are made to grow with the help of a growth medium which is developed to optimize the antigen's yield and also it maintains the integrity of the pathogenic bacteria.
Find the mass of 3.21 x 10^-2 Nickel
Answer:
1.88 g
Explanation:
n(moles) = mass/molar mass
mass = moles x molar mass of nickel
mass = 3.21x10^-2 x 58.69
mass = 1.883949 grams
mass = 1.88 g (2dp)
Hope this helps :)
Which Reference Tables must be used to determine the number of carbon atoms in a parent chain and the type of bonding between the atoms in the parent chain?
O Table P, only
O Table P and Table O, only
O Table N and Table O, only
O Table P and Table Q, only
Answer:
Explanation:
Did you get the answer to the test, I have the same one but don’t understand the questions that well
Question 8 of 10
Which functional group is within the compound shown below?
R-OH
A. Carbonyl
B. Amino
C. Ester
D. Hydroxy
Answer:
Hydroxyl (alcohol compound)
Explanation:
*view photo*
D. Hydroxy
A hydroxy or hydroxyl group is a functional group with the chemical formula -OH and composed of one oxygen atom covalently bonded to one hydrogen atom.Hydroxyl groups are polar, and the oxygen side is always negative, while the hydrogen side is always positive.The functional group of the alcohols is the hydroxyl group, –OH.For example: Methanol is an alcohol containing hydroxyl functional group.Therefore, the correct option is option D.
Learn more:
brainly.com/question/696051
WHAT IS EXOTHERMIC EXPLAIN
Explanation:
An exothermic reaction is a "reaction for which the overall standard enthalpy change ΔH⚬ is negative." Exothermic reactions usually release heat and entail the replacement of weak bonds with stronger ones.
hope it helps
stay safe healthy and happy..Answer:
Exothermic reactions are reactions or processes that release energy, usually in the form of heat or light. In an exothermic reaction, energy is released because the total energy of the products is less than the total energy of the reactants.Explanation:
I hope this helps u have a nice day ☘You are reacting hydrogen gas with tin oxide to purify tin. SnO2 + 2 H2 → Sn + 2 H2O. You have 45.8L of H2 gas and 351.3g of SnO2. What will be the limiting reactant, and how much of the excess reactant will be left over?
Answer: The limiting reactant is hydrogen gas and the mass of excess reactant [tex](SnO_2)[/tex] left over is 197.43 g
Explanation:
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
......(1)
We are given:
Given mass of [tex]SnO_2[/tex] = 351.3 g
Molar mass of [tex]SnO_2[/tex] = 150.71 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of }SnO_2=\frac{351.3g}{150.71g/mol}=2.33mol[/tex]
At STP conditions:
22.4 L of volume is occupied by 1 mole of a gas
Applying unitary method:
45.8 L of volume will be occupied by = [tex]\frac{1mol}{22.4L}\times 45.8L=2.04mol[/tex] of hydrogen gas
For the given chemical reaction:
[tex]SnO_2+2H_2\rightarrow Sn+2H_2O[/tex]
By stoichiometry of the reaction:
If 2 moles of hydrogen gas reacts with 1 mole of [tex]SnO_2[/tex]
So, 2.04 moles of hydrogen gas will react with = [tex]\frac{1}{2}\times 2.04=1.02mol[/tex] of [tex]SnO_2[/tex]
As the given amount of [tex]SnO_2[/tex] is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Thus, hydrogen gas is considered a limiting reagent because it limits the formation of the product.
Moles of excess reactant ([tex]SnO_2[/tex]) left = [2.33 - 1.02] = 1.31 moles
We know, molar mass of [tex]SnO_2[/tex] = 150.71 g/mol
Putting values in equation 1, we get:
[tex]\text{Mass of }SnO_2=(1.31mol\times 150.71g/mol)=197.43g[/tex]
Hence, the limiting reactant is hydrogen gas and the mass of excess reactant [tex](SnO_2)[/tex] left over is 197.43 g
If a sample of oxygen has a volume of 160 L at 91 degrees celsius what will the oxygen be when the temperature drops to 0.00 degrees celsius.
Answer:
120 L
Explanation:
Step 1: Given data
Initial volume (V₁): 160 LInitial temperature (T₁): 91 °CFinal volume (V₂): ?Final temperature (T₂): 0.00 °CStep 2: Convert the temperatures to the Kelvin scale
We will use the following expression.
K = °C + 273.15
K = 91°C + 273.15 = 364 K
K = 0.00°C + 273.15 = 273.15 K
Step 3: Calculate the final volume occupied by the oxygen
Assuming ideal behavior and constant pressure, we can calculate the final volume occupied by the oxygen using Charles' law.
V₁/T₁ = V₂/T₂
V₂ = V₁ × T₂/T₁
V₂ = 160 L × 273.15 K/364 K = 120 L
PLEASE HELP THIS IS TIMED
Which of the following is a physical change?
CsF(s) + XeFo(s) → CsXeF;(s)
CO2 (s) + CO2(g)
O N2 (g) + 3H2 (g) → 2NH3 (g)
2H2 (g) + O2 (g) → 2H20 (1)
Zn(s) + 2 MnO2(s) + H20(1) → Zn(OH)2(s) + Mn2O3(s)
Which substance would you expect to dissolve most rapidly in 100 mL water?
A
0.4 g granulated sugar
B
0.2 g powdered sugar
C
0.4 g powdered sugar
D
0.2 g sugar cube
Answer:
b because it is just 0.2 g and powdered sugar has more contact surface than granulated sugar or sugar cube
The solubility can be given as the amount of solute that can be dissolved in the 100 ml of the solution. The most rapidly dissolved sugar in water is 0.2 gram powdered sugar.
What is a contact surface?The contact surface can be given as the area of the compound that is in direct contact with the solution.
The solubility of the compound is found more in the solute with increased surface area.
The surface area of powdered sugar will be maximum, as more granules of the sugar will be in contact with the water than the cube or the granulated sugar.
Thus, the most rapid dissolution in water is found with 0.2 grams of powdered sugar. Thus, option B is correct.
Learn more about solubility, here:
https://brainly.com/question/13620168
The period of development from fertilized egg to birth is known as
The period of development from fertilized egg to birth is known as [tex]{ \bf{ \underbrace{prenatal\: development}}}[/tex].
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
Please answer quickly!! 20 points!!9. Which represents the greatest mass of chlorine?
A) 1 mole of chlorine
B) 1 atom of chlorine
C) 1 gram of chlorine
D) 1 molecule of chlorine
Answer:
1 mole
Explanation:
if correct you may follow me for more helps
Among the given quantities, the greatest mass of chlorine is represented by one molecule of chlorine Cl₂ that is equal to 71 grams.
What is one molecules?A molecule of an element is formed by the combination of two atoms of that element. One mole of an element is the amount containing 6.022 × 10²³ atoms. This s number is called Avogadro number.
The mass of one mole of an element is called its atomic mass. Cl is 17th element. Atomic mass of Cl = 35.5 g
35.5 g of Cl is called one mole of Cl containing Avogadro number of atoms.
One molecule of Cl is represented as Cl₂ with the mass = 35.5 × 2 = 71 g.
This is the molecular mass of Cl.
One gram of Cl is small amount and mass of one atom of Cl is even smaller. Thus, one molecules of Cl represents the greater mass here. Hence, option D is correct.
Find more on molecular mass:
https://brainly.com/question/3182776
#SPJ2
A sealed balloon filled with 5.00 liters of gas has a pressure of 1.49 atm. This balloon is taken under water where the pressure of the gas becomes 7.62
atm. What is the new volume of this gas? (Assume the temperature does not change.)
O 56.7L
0 0.978 L
0 1.02 L
O 2.27L
Answer:
0.978L
Explanation:
Using Boyle's law equation as follows;
P1V1 = P2V2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
V1 = initial volume (L)
V2 = final volume (L)
According to the provided information,
P1 = 1.49 atm
V1 = 5.00 liters
P2 = 7.62 atm
V2 = ?
Using P1V1 = P2V2
1.49 × 5 = 7.62 × V2
7.45 = 7.62V2
V2 = 7.45/7.62
V2 = 0.978L
hola genteee ayuda me pueden decir 5 propiedades físicas y 5 propiedades químicas del ácido sulfúrico porfa es urgente !
Answer:
La respuesta está en la explicación.
Explanation:
Las propiedades físicas son las visibles y medibles que no afectan químicamente la sustancia en cuestión. Las propiedades químicas hacen alusión a la reactividad de la sustancia:
Propiedades físicas ácido sulfúrico:
Líquido a temperatura ambiente.
Densidad: 1.83g/mL
Punto de fusión: 10°C
Punto de ebullición: 337°C
Índice de refracción: 1.397
Propiedades Químicas:
Ácido Fuerte.
Oxidante Fuerte.
Miscible con el agua reaccionando exotérmicamente.
A temperaturas > 30°C produce vapores azufrados.
Estable en concentraciones menores al 98%
