A cylindrical disk of wood weighing 45.0 N and having a diameter of 30.0 cm floats on a cylinder of oil of density 0.850 g>cm3 (Fig. E12.19). The cylinder of oil is 75.0 cm deep and has a diameter the same as that of the wood. (a) What is the gauge pressure at the top of the oil column

The velocity of B after the collision is obtained as -2.6 m/s.

Now we now that the  principle of conservation of momentum states that the momentum before collision is equal to the momentum after collision.

Thus;

(-2.00kgm/s) + ( -5.00kgm/s) = ( 4.00kg * 2.50 m/s) + ( 6.50kg * v)

-7 = 10 + 6.5v

-7 - 10 = 6.5v

v = -7 - 10 /6.5

v = -2.6 m/s

Hence, the velocity of B after the collision is obtained as -2.6 m/s.

Learn more about elastic collision:https://brainly.com/question/5719643

#SPJ1

Answer:

Florida is tropical, with a significant rainy seson

When the source is moving away from the observer the velocity of the source is added to the speed of light. This increases the value of the denominator, decreasing the value of the observed frequency. Frequency corresponds to pitch or tone; a lower observed frequency will result in a lower observed pitch.

Answer:

P = -1 D

Explanation:

For this exercise we must use the equation of the constructor

       / f = 1 / p + 1 / q

where f is the focal length, p and q is the distance to the object and the image, respectively

The far view point is at p =∞  and its image must be at q = -100 cm = 1 m, the negative sign is because the image is on the same side as the image  

        [tex]\frac{1}{f} = \frac{1}{infinity} + \frac{1}{-1}[/tex]

         f = 1 m

         P = 1/f

          P = -1 D

Answer:

No. As we gain mass the force of gravity on us does not decrease

The rate of energy radiated by the man is 3.86 x [tex]10^{-8}[/tex]  J/s. [tex]m^{2}[/tex].

The amount of energy radiated by an object majorly depends on the area of its surface and its temperature. The is well explained in the Stefan-Boltzmann's law which states that:

Q(t) = Aeσ[tex]T^{4}[/tex]

where: Q is the quantity of heat radiated, A is the surface area of the object, e is the emmisivity of the object, σ is the Stefan-Boltzmann constant and T is the temperature of the object.

To determine the rate of energy radiated by the man in the given question;

[tex]\frac{Q(t)}{T^{4} }[/tex] = Aeσ

But A = 1.7 m², e = 0.4 and σ = 5.67 x [tex]10^{-8}[/tex] J/s.

So that;

[tex]\frac{Q(t)}{T^{4} }[/tex] = 1.7 * 0.4 * 5.67 x [tex]10^{-8}[/tex]

     = 3.8556 x [tex]10^{-8}[/tex]

     = 3.86 x [tex]10^{-8}[/tex]  J/s. [tex]m^{2}[/tex]

Thus, the rate of energy radiated by the man is 3.86 x [tex]10^{-8}[/tex]  J/s. [tex]m^{2}[/tex].

Learn more on energy radiation of objects by visiting: https://brainly.com/question/12550129

Answer:

Ecologist.

Your answer is Ecologist.

(Ecologist) is a scientist who studies the whole environment as a working unit.

[tex]F = 5.93×10^{13}\:\text{N}[/tex]

Explanation:

Given:

[tex]m_1= 2×10^{16}\:\text{kg}[/tex]

[tex]m_2= 4×10^{22}\:\text{kg}[/tex]

[tex]r = 30000\:\text{km} = 3×10^7\:\text{m}[/tex]

Using Newton's universal law of gravitation, we can write

[tex]F = G\dfrac{m_1m_2}{r^2}[/tex]

[tex]\:\:\:\:=(6.674×10^{-11}\:\text{N-m}^2\text{/kg}^2)\dfrac{(2×10^{16}\:\text{kg})(4×10^{22}\:\text{kg})}{(3×10^7\:\text{m})^2}[/tex]

[tex]\:\:\:\:= 5.93×10^{13}\:\text{N}[/tex]

Explanation:

Let [tex]\textbf{A} = 6\hat{\textbf{i}} + 4\hat{\textbf{j}} - 2\hat{\textbf{k}}[/tex] and [tex]\textbf{B} = 2\hat{\textbf{i}} - 2\hat{\textbf{j}} + 3\hat{\textbf{k}}[/tex]

The sum of the two vectors is

[tex]\textbf{A + B} = (6 + 2)\hat{\textbf{i}} + (4 - 2)\hat{\textbf{j}} + (-2 + 3)\hat{\textbf{k}}[/tex]

[tex] = 8\hat{\textbf{i}} + 2\hat{\textbf{j}} + \hat{\textbf{k}}[/tex]

The difference between the two vectors can be written as

[tex]\textbf{A - B} = (6 - 2)\hat{\textbf{i}} + (4 - (-2))\hat{\textbf{j}} + (-2 - 3)\hat{\textbf{k}}[/tex]

[tex]= 4\hat{\textbf{i}} + 6\hat{\textbf{j}} - 5\hat{\textbf{k}}[/tex]

Answer:

[tex]v_1=87.40m/s[/tex]

Explanation:

From the question we are told that:

Mass of arrow [tex]m=52g[/tex]

Mass of rock [tex]m_r=1.50kg[/tex]

Height [tex]h=0.47m[/tex]

Generally the equation for Velocity is mathematically given by

 [tex]v = \sqrt{(2gh)}[/tex]

 [tex]v=\sqrt{(2 * 9.8m/s² * 0.47m) }[/tex]

 [tex]v= 3.035m/s[/tex]

Generally the equation for conservation of momentum is mathematically given by

 [tex]m_1v_1=m_2v_2[/tex]

 [tex]0.052kg * v = 1.5 * 3.03m/s[/tex]

 [tex]v_1=87.40m/s[/tex]

Answer:

The answer is "0.00466 N".

Explanation:

[tex]F=(B \times i) L\\\\[/tex]

therefore the smaller side is parallel to magnetic field  

[tex]\therefore \\\\F= B i L\ \sin\ 'o'=0 \ N[/tex]

calculating the force on the layer side:

[tex]\to F=0.15 \times 1.7 \times 0.0183 \times \sin 90^{\circ}=0.00466\ N\\\\[/tex]

Therefore [tex]F_o[/tex] the net force on the  rectangular loop [tex]= 0.00466 \ N[/tex]

Answer:

Charge of the particle is 1 coulomb.

Explanation:

Force, F:

[tex]{ \bf{F=BeV}}[/tex]

F is magnetic force.

B is the magnetic flux density.

e is the charge of the particle.

V is the velocity

[tex]{ \sf{20 = (5 \times e \times 4)}} \\ { \sf{20e = 20}} \\ { \sf{e = 1 \: coulomb}}[/tex]

Answer:

Explanation:

Here's the info we have:

initial velocity is 20 m/s;

final velocity is our unknown;

displacement is -10.2 m; and

acceleration due to gravity is -9.8 m/s/s. Using the one-dimensional equation

v² = v₀² + 2aΔx and filling in accordingly to solve for v:

[tex]v=\sqrt{(20)^2+2(-9.8)(-10.2)}[/tex]  Rounding to the correct number of sig fig's to simplify:

[tex]v=\sqrt{400+2.0*10^2}[/tex] to get

v = [tex]\sqrt{600}=20\frac{m}{s}[/tex] If you don't round like that, the velocity could be 24, or it could also be 24.5 depending on how your class is paying attention to sig figs or if you are at all.

So either 20 m/s or 24 m/s

Answer:

check 2 photos for answer

check 2 photos for answer

The horizontal force applied to the lower block is approximately 1,420.85 Newtons

The known parameters are;

The mass of the block, m₁ = 400 kg, weight, W₁ = 3,924 N

The mass of the block resting on the first block, m₂ = 100 kg, weight, W₂ = 981 N

The length of the string attached to the block, W₂, l = 6 m

The horizontal distance from the point of attachment of the second block to the block W₂, x = 5 m

The coefficient of friction between the surfaces, μ = 0.25

Let T represent the tension in the string

The upward force on W₂ due to the string = T × sin(θ)

The normal force of W₁ on W₂, N₂ = W₂ - T × sin(θ)

The tension in the string, T = N₂ × μ × cos(θ)

∴ T = (W₂ - T × sin(θ)) × μ × cos(θ)

sin(θ) = √(6² - 5²)/6

cos(θ) = 5/6

∴ T = (981 - T × √(6² - 5²)/6) × 0.25 × 5/6

Solving, we get;

T ≈ 183.27 N

The normal reaction on W₂, N₂ = T/(μ × cos(θ))

∴ N₂ = 183.27/(0.25 × 5/6) = 879.7

N₂ ≈ 879.7 N

The friction force, [tex]F_{f2}[/tex] = N₂ × μ

∴ [tex]F_{f2}[/tex] = 879.7 N × 0.25 = 219.925 N

The total normal reaction on the ground, [tex]\mathbf{N_T}[/tex] = W₁ + N₂

[tex]N_T[/tex] = 3,924 N + 879.7 N = 4,803.7 N

The friction force, on the ground [tex]\mathbf{F_T}[/tex] = [tex]\mathbf{N_T}[/tex] × μ

∴  [tex]F_T[/tex] = 4,803.7 N × 0.25 = 1,200.925 N

The horizontal force applied to the lower block, P = [tex]\mathbf{F_T}[/tex] + [tex]\mathbf{F_{f2}}[/tex]

Therefore;

P = 1,200.925 N + 219.925 N = 1,420.85 N

The horizontal force applied to the lower block, P ≈ 1,420.85 N

Answer:

PlROCA

Explanation:

Answer:

Answer:

Distance from sun to Neptune = 4.495E9 km

Time for light to travel = 4.495E9 / 3E5 sec = 14,980 sec

That is from sun to Neptune time fof light = 250 min

Time for light to travel from sun to earth is about 8 min

So the time from Neptune would be 242 to 258 min depending on position of Neptune - Note that Neptune is about 30X as far from the sun as earth and

250 min / 8 min is roughly 30

The uniform motion of kinematics allows us to find the time it takes for light to arrive from Neptune to Earth, which varies between:

          t₁ = 1.45 10⁴ s and t₂₂= 1.55 10⁴ s

depending on the relative distance of the two planets

given parameters

to find

They  velocit of an electromagnetic wave is constant, so we can use the uniform motion relationships

             v = d / t

             t = d / v

where v is the speed of light, d the distance and y time, in this case the speed of the wave is the speed of light (v = c)

We look in the tables for the distances and the rotation periods around the sun

                           distance ( m)         period (s)

Sun Neptunium     4.50 10¹²             5.2 10⁹

Sun - Earth             1.5    10¹¹              3.2 10⁷

With the data of the period it is observed that the rotation of Neptune is much greater than that of Eart rotation around the sun, for which we will assume that Neptunium is fixed in space and the Earth may be in its aphelion or perihelion, maximum approach o away distance from the sun, consequently we calculate the time for the two cases:

Maximum approach

positions relative distance from the dos Plantetas is

         Δd = [tex]x_{Neptuno - Sum} - x_{Earth - Sum}[/tex]d  

         Δd = 4.50 10¹²  - 1.5 10¹¹

         Δd = 43.5 10¹¹ m

the time it takes for Neptune's light to reach Earth is

        Δt = [tex]\frac{ 43.5 \ 10^{11} }{3 \ 10^8}[/tex]  

        Δt = 14.5 10³ s

        Δt = 1.45 10⁴ s

We reduce to hours

        Δt = 1.45 10⁴ s (1 h / 3600 s) = 4.03 h

Maximum away

         Δd = [tex]x_{Neptune - Sum} + x_{Neptune-Sum}[/tex]  

         Δd = 4.50 10¹² + 1.5 10¹¹

         Δd = 46.5 10¹¹

The time is

         Δt = [tex]\frac{46.5 \ 10^{11}}{ 3 \ 10^8}[/tex]  

         Δt = 15.5 10³

         Δt = 1.55 10⁴ s

We reduce to hours

         Δt = 1.55 10⁴ s (1 h / 3600 s) = 4.31 h

In conclusion, the time it takes for light to arrive from Neptune to Earth varies between:

          t₁ = 1.45 10⁴ s and t₂ = 1.55 10⁴ s

depending on the relative distance of the two plants

learn more about the speed of light here:   https://brainly.com/question/14355103

Explanation:

some thing inside a resistor

Answer:

d = 30kg/cm³

Explanation:

d = m/v

d = 1080kg/(3cm*4cm*3cm)

d = 30kg/cm³

Answer:

The point of contraflexure (PoC) occurs where bending is zero and at the point of change between positive and negative (or between compression and tension). In a beam that is flexing (or bending), the point where there is zero bending moment is called the point of contraflexure.

Answer:

where is the attachment

Explanation:

Explanation:

The box is accelerating along the y-axis at a rate of [tex]+2.5\:\text{m/s}^2[/tex] as well as along the x-axis at a rate of [tex]+5.1\:\text{m/s}^2.[/tex] So the magnitude of the box's total acceleration is given by

[tex]a_T = \sqrt{a_x^2 + a_y^2}[/tex]

[tex]\:\:\:\:= \sqrt{(5.1\:\text{m/s}^2)^2 + (2.5\:\text{m/s}^2)^2}[/tex]

[tex]\:\:\:\:=5.7\:\text{m/s}^2[/tex]

The direction of the acceleration [tex]\theta[/tex] with respect to the horizontal direction is given by

[tex]\theta = \tan^{-1}\!\left(\dfrac{a_y}{a_x}\right) = \tan^{-1}\!\left(\dfrac{2.5\:\text{m/s}^2}{5.1\:\text{m/s}^2}\right)[/tex]

[tex]\:\:\:\:= 26.1°[/tex]

The velocity of the ball is 100m/s

The first step is to write out the parameters;

The force used to kick the ball is 1000N

The mass of the ball is 0.8 kg

Time is 0.8 seconds

Therefore the velocity can be calculated as follows

F= Mv-mu/t

1000= 0.8(v) - 0.8(0)/0.8

1000= 0.8v- 0.8/0.8

Cross multiply both sides

1000(0.8) = 0.8v

800= 0.8v

divide both sides by the coefficient of v which is 8

800/0.8= 0.8v/0.8

v= 1000m/s

Hence the velocity is 1000m/s

Learn more via the link below;

https://brainly.com/question/16860823?referrer=searchResults

We have that the spring constant is mathematically given as

[tex]k=2.37*10^{11}N/m[/tex]

Generally, the equation for angular velocity is mathematically given by

[tex]\omega=\sqrt{k}{m}[/tex]

Where

k=spring constant

And

[tex]\omega =\frac{2\pi}{T}[/tex]

Therefore

[tex]\frac{2\pi}{T}=\sqrt{k}{n}[/tex]

Hence giving spring constant k

[tex]k=m((\frac{2 \pi}{T})^2[/tex]

Generally

Mass of earth [tex]m=5.97*10^{24}[/tex]

Period for on complete resolution of Earth around the Sun

[tex]T=365 days[/tex]

[tex]T=365*24*3600[/tex]

Therefore

[tex]k=(5.97*10^{24})((\frac{2 \pi}{365*24*3600})^2[/tex]

[tex]k=2.37*10^{11}N/m[/tex]

In conclusion

The effective spring constant of this simple harmonic motion is

[tex]k=2.37*10^{11}N/m[/tex]

For more information on this visit

https://brainly.com/question/14159361

Answer:

In direct-current circuit theory, Norton's theorem is a simplification that can be applied to networks made of linear time-invariant resistances, voltage sources, and current sources. At a pair of terminals of the network, it can be replaced by a current source and a single resistor in parallel.

Answer:

T1 = 736.6 N, T2 = 193.5 N

Explanation:

W = 76 N

The tension is T1 and T2.

By use of Lami's theorem

[tex]\frac{T_1}{Sin100}=\frac{T_2}{Sin165}=\frac{W}{Sin 95}\\\\So, \\\\T_1 = \frac{76\times 9.8\times Sin 100}{Sin 95} = 736.6 N \\And\\T_2 = \frac{76\times 9.8\times Sin 165}{Sin 95} = 193.5 N \\[/tex]

The intensity of the electromagnetic wave in terms of the electric field is 0.00298 W/m² and the intensity of the electromagnetic wave in terms of the magnetic field is 1.193x10⁻⁶  W/m².

The intensity of the electromagnetic wave is related to the electric field as well as to the magnetic field.    

a) Intensity of the electromagnetic wave for the electromagnetic field.

The intensity of the electromagnetic wave (I) in terms of the electromagnetic field is given by:

[tex] I = \frac{E^{2}*c*\epsilon_{0}}{2} [/tex]   (1)

Where:

c: is the speed of light = 3.00*10⁸ m/s  

E: is the magnitude of the electric field = 1.5 V/m

ε₀: is the permittivity of free space = 8.85*10⁻¹² C²/Nm²

Hence, the intensity of the electromagnetic wave (eq 1) is:

[tex] I = \frac{(1.5 V/m)^{2}*3.00 \cdot 10^{8} m/s*8.85 \cdot 10^{-12} C^{2}/(N*m^{2})}{2} = 0.00298 W/m^{2} [/tex]                                                                                          

b) Intensity of the electromagnetic wave for the magnetic field

We can calculate the intensity of the electromagnetic wave (I) in terms of the magnetic field with the following equation:

[tex] I = \frac{cB^{2}}{2\mu_{0}} [/tex]   (2)

Where:

B: is the magnitude of the magnetic field = 10⁻¹⁰ T

μ₀: is the vacuum permeability = 4π*10⁻⁷ m*T/A

Therefore, the intensity of the electromagnetic wave (eq 2) is:

[tex] I = \frac{3.00 \cdot 10^{8} m/s*(1\cdot 10^{-10} m*T/A)^{2}}{2*4\pi \cdot 10^{-7} T/A} = 1.193 \cdot 10^{-6} W/m^{2} [/tex]

Learn more about electromagnetic waves and magnetic and electric fields here: https://brainly.com/question/11647801?referrer=searchResults                                          

I hope it helps you!