A concave mirror has a focal length of magnitude f. An object is palced in front of this mirror at a point 1/2 f from the face of the mirror. The image will appear:______.
a) behind the mirror.
b) upright and reduced.
c) upright and enlarged.
d) inverted and reduced.
e) inverted and enlarged.

Answer:

Raw materials are most times gotten from the earth through various forms of extraction procedures.

A) Stainless steel utensils is made up of mainly Iron and other elements such as chromium , carbon etc.

B) Cat litter comprises of ceramic products which is made up of clay.

C) Tums brand antacid tablets comprises of calcium carbonate, magnesium hydroxide, aluminum hydroxide and sodium bicarbonate which could be extracted from the earth.

D)Lithium batteries are made up of elements in the earth such as lithium and carbon.

E)Aluminum beverage cans are made up of aluminum extracted from the ground.

Answer:

-0.24diopters

Explanation:

The lens is intended that makes an object at infinity appear to be 4.2 m away, so do=infinity, dI = - 4.2m (minus sign because image is on same side of lens as object)

So 1/do +1/di = 1/f

1/infinity + 1/-4.2 = 1/f

1/f = 1/-4.2 = -0.24diopters

Answer:

0.99Hz

Explanation:

Using F= -mx ( spring force)

At equilibrium the gravitational force will be balanced by the spring force so mg= kx

K= mg/ 0.25 N/m

But

Frequency f= 1/2pi √g/0.25

Frequency is 0.99Hz

The block is pulled down slightly and released so, Frequency of oscillation is 3.15 Hz

What information do we have?

Length starched = 2.5 cm

F = Kx

We know that

F = mg

So,

mg = Kx

K/m = g/x

[tex]f=\frac{1}{2\pi}\sqrt{\frac{g}{x} }\\f=\frac{1}{2\pi}\sqrt{\frac{9.8}{0.025} }[/tex]

Frequency of oscillation = 3.15 Hz

Find out more information about 'Oscillation'.

https://brainly.com/question/16016711?referrer=searchResults

Answer:

c. above the point of unit elasticity.

Explanation:

The elastic portion of the downward-sloping straight-line demand curve lies above the point of unit elasticity. Supply and demand are fundamental concept in economics. The demand curve shows how much of a good people will want at a different prices. The demands curves illustrates the intuition why people purchase a good for a lower price. For the demand curve, the price is always shown on the vertical axis and the demand curve is shown on the horizontal axis. Thus , the quantity demanded increases as the price gets lower. However, the price elasticity of the demand curve varies along the demand curve. This is because there is a key distinction between the gradient and the elasticity. The gradient which is the slope of the line is always the same in the demand curve but elasticity of the demand changes in the percentage of the quantity demand. Therefore, elasticity will vary along the downward-sloping straight - line demand curve. So,  in a downward-sloping straight-line demand curve, the elastic portion is usually above the  point of unit elasticity

Answer:

[tex]\large \boxed{\mathrm{C. \ \ \frac{500}{7 \times 15 \times 8} \ g/cm^3 }}[/tex]

Explanation:

[tex]\displaystyle \sf Density = \frac{mass}{volume}[/tex]

[tex]\displaystyle \rho = \frac{m}{V}[/tex]

[tex]\sf mass=500 \ g[/tex]

[tex]\sf volume \ of \ a \ cuboid=width \times length \times height=( 7 \times 15 \times 8) \ cm^3[/tex]

[tex]\displaystyle \rho = \frac{500}{7 \times 15 \times 8}[/tex]

Answer:

The velocity is 40 ft/sec.

Explanation:

Given that,

Force = 3200 lb

Angle = 30°

Speed = 64 ft/s

The resistive force with magnitude proportional to the square of the speed,

[tex]F_{r}=kv^2[/tex]

Where, k = 1 lb s²/ft²

We need to calculate the velocity

Using balance equation

[tex]F\sin\theta-F_{r}=m\dfrac{d^2v}{dt^2}[/tex]

Put the value into the formula

[tex]3200\sin 30-kv^2=m\dfrac{d^2v}{dt^2}[/tex]

Put the value of k

[tex]3200\times\dfrac{1}{2}-v^2=m\dfrac{d^2v}{dt^2}[/tex]

[tex]1600-v^2=m\dfrac{d^2v}{dt^2}[/tex]

At terminal velocity [tex]\dfrac{d^2v}{dt^2}=0[/tex]

So, [tex]1600-v^2=0[/tex]

[tex]v=\sqrt{1600}[/tex]

[tex]v=40\ ft/sec[/tex]

Hence, The velocity is 40 ft/sec.

Answer:

The  velocity is  [tex]v = 2.6*10^{8} \ m/s[/tex]

Explanation:

From the  question we are told that

   The side of the cube is  [tex]l = 0.13 \ m[/tex]

   The  mass of the object is  [tex]m = 2.0 \ kg[/tex]

   The  density of the object is  [tex]\rho = 7300 \ kg / m^3[/tex]

Generally the volume of the object according to the moving observer is mathematically represented  as

        [tex]V =\frac{m}{\rho}[/tex]

        [tex]V =\frac{2}{7300}[/tex]

       [tex]V = 2.74*10^{-4} \ m^3[/tex]

Therefore the length of the side as observed by the observer on high speed is mathematically represented as

     [tex]L = \sqrt[3]{V}[/tex]        

     [tex]L = \sqrt[3]{2.74 *10^{-4}}[/tex]    

     [tex]L =0.065[/tex]

Now the original length of side is mathematically represented as

      [tex]L= l * \sqrt{ (1 - ( \frac{ v}{c})^2 )}[/tex]

Where c is the speed of light with value [tex]c = 3.0*10^{8} \ m/s[/tex]

So

     [tex]v = \sqrt{1 - [\frac{L}{l}]^2} * c[/tex]

=>  [tex]v = \sqrt{1 - [\frac{0.065}{0.13}]^2} * c[/tex]

=>   [tex]v = 2.6*10^{8} \ m/s[/tex]

Answer:

The distance is [tex]D = 2.6 \ m[/tex]

Explanation:

From the question we are told that

    The wavelength of the light is  [tex]\lambda = 476.1 \ nm = 476.1 *10^{-9} \ m[/tex]

      The  distance between the slit is  [tex]d = 0.29 \ mm = 0.29 *10^{-3} \ m[/tex]

       The  between the first and second dark fringes is  [tex]y = 4.2 \ mm = 4.2 *10^{-3} \ m[/tex]

Generally  fringe width is mathematically represented as

       [tex]y = \frac{\lambda * D }{d}[/tex]

Where D is the distance of the slit to the screen

   Hence

        [tex]D = \frac{y * d}{\lambda }[/tex]

substituting values

       [tex]D = \frac{ 4.2 *10^{-3} * 0.29 *10^{-3}}{ 476.1 *10^{-9} }[/tex]

        [tex]D = 2.6 \ m[/tex]

Answer:

1.true

Explanation:

Answer:

1. True

2. True

3. True

Explanation for Question 1.

A nucleus consists of a bunch of protons and neutrons; these are known as nucleons. The atomic mass number, which is the total number of nucleons;

So, this sentence says that the atomic number is the number of protons and neutrons.

Explanation for Question 2.

Iron has 26 protons.

The number of protons = the atomic number.

So, the atomic number should be 26 also,

When we see the periodic table, Iron's atomic number is 26, so the statement is true.

Explanation for Question 3.

Red photons of light carry about 1.8 electron volts of energy. Infrared radiation has longer waves than red light, and thus oscillates at a lower frequency and carries less energy.

So, the above statement proves that the photon of infrared light has less energy than the photon of red light.

Answer:

1.94cm³/s

Explanation:

1L = 1000cm³

Ihr = 3600s

So

Using

Average flow rate

Fr= 1L/100Km x 700Km/1hr x 1hr/3600s x 1000cm³/ 1L

= 1.94cm³/s

Answer:

Electric field is zero at point 4.73 m

Explanation:

Given:

Charge place = 50 cm  = 0.50 m

change q1 = 5 µC

change q2 = 4 µC

Computation:

electric field zero calculated by:

[tex]E1 =k\frac{q1}{r^2} \\\\E2 =k\frac{q2}{R^2} \\\\[/tex]

Where electric field is zero,

First distance = x

Second distance = (x-0.50)

So,

E1 = E2

[tex]k\frac{q1}{r^2}=k\frac{q2}{R^2} \\\\[/tex]

[tex]\frac{5}{x^2}=\frac{4}{(x-50)^2} \\\\[/tex]

x = 0.263 or x = 4.73

So,

Electric field is zero at point 4.73 m

Answer:

Final temperature Water = 20.99-degree  celsius

Final temperature  Concrete = 24.98  degree celsius

Final temperature  Steel = 50.1 degree  celsius

Final temperature Mercury = 29.26  degree  celsius

Explanation:

Given the mass of each substance = 1.50 kg

Ti = 15

Q = 1.5 kcal = 6276 joule

We have to use the heat capacity of each object so find the heat capacity from the table.

Heat capacity of water = 4186 J/kg degree celsius.

Heat capacity of concrete = 840 J/kg degree celsius.

Heat capacity of steel = 452 J/kg degree celsius.

Heat capacity of mercury = 139 J/kg degree celsius.

Use the below formula to find the final temperature.

[tex]T_f = T_i + \frac{Q}{mc_w} \\[/tex]

[tex]\text{Temperature in the case of water.} \\= 20 + \frac{6276}{1.5 \times 4186 } \\= 20.99 \ degree \ celsius \\\text{Temperature in the case of concrete.} \\= 20 + \frac{6276}{1.5 \times 840 } \\= 24.98 \ degree \ celsius \\\text{Temperature in the case of steel.} \\= 20 + \frac{6276}{1.5 \times 452 } \\= 29.26 \ degree \ celsius \\\text{Temperature in the case of mercury.} \\= 20 + \frac{6276}{1.5 \times 139 } \\= 50.1 \ degree \ celsius \\[/tex]

Answer:

The new volume will be 0.918 x 10^5 L

Explanation:

initial volume  [tex]V_{1}[/tex] = 1.21 x 10^5 L

Initial temperature [tex]T_{1}[/tex] = 265 K

Final volume [tex]V_{2}[/tex] = ?

Final temperature [tex]T_{2}[/tex] = 201 K

Th gas is an ideal gas.

For ideal gases, the equation [tex]V_{1}[/tex]/[tex]T_{1}[/tex] = [tex]V_{2}[/tex]/[tex]T_{2}[/tex] = constant

substituting value, we have

(1.21 x 10^5)/265 = [tex]V_{2}[/tex]/201

[tex]V_{2}[/tex] =  24321000/265 = 91777.4 L

= 0.918 x 10^5 L

The correct answer is C. Observation

Explanation:

An observation is a statement a describes a phenomenon, which is the result of measuring the phenomenon or using the senses to collect information about it. Additionally, observations are part of the Scientific method because through observations it is possible to understand phenomena.

The sentence presented is an observation because this statement is the result of the researcher observing or measuring how fast kernels pops, which means the statement derives from studying a phenomenon. Also, this cannot be classified as a hypothesis because a hypothesis is a probable explanation, and it cannot be classified as an experiment because the experiment is the general method to prove or disprove a hypothesis.

Answer:

10.8rev

Explanation:

Using

Wf²-wf = 2 alpha x theta

0²- 56.36x56.36/ 2(-20.13) x theta

Theta = 68.09 rad

But 68.09/2π

>= 10.8 revolutions

Explanation:

Answer:

Explanation:

Let the race be of a fixed distance x

[tex]Average Speed = \frac{Total Distance}{Total Time}[/tex]

Troy's Average speed = 3 miles/hr = x / 0.2 hr

x = 0.6 miles

Abed's Average speed = 0.6 / 0.125 = 4.8 miles/hr

Answer:

65.3 Inches tall

Explanation:

If Sammy is 5 feet and 5.3 inches tall, we simply need to convert the feet to inches, and sum the remaining inches from his height to determine his overall height in inches.

So, 5 feet = (12 inches/1foot) * (5 feet) = 60 inches

And 60 inches + 5.3 inches = 65.3 inches.

Hence, Sammy is 65.3 inches tall.

Cheers.

Answer:

The magnitude of the total linear acceleration is 0.27 m/s²

b. 0.27 m/s²

Explanation:

The total linear acceleration is the vector sum of the tangential acceleration and radial acceleration.

The radial acceleration is given by;

[tex]a_t = ar[/tex]

where;

a is the angular acceleration and

r is the radius of the circular path

[tex]a_t = ar\\\\a_t = 1.6 *0.13\\\\a_t = 0.208 \ m/s^2[/tex]

Determine time of the rotation;

[tex]\theta = \frac{1}{2} at^2\\\\0.4 = \frac{1}{2} (1.6)t^2\\\\t^2 = 0.5\\\\t = \sqrt{0.5} \\\\t = 0.707 \ s\\\\[/tex]

Determine angular velocity

ω = at

ω = 1.6 x 0.707

ω = 1.131 rad/s

Now, determine the radial acceleration

[tex]a_r = \omega ^2r\\\\a_r = 1.131^2 (0.13)\\\\a_r = 0.166 \ m/s^2[/tex]

The magnitude of total linear acceleration is given by;

[tex]a = \sqrt{a_t^2 + a_r^2} \\\\a = \sqrt{0.208^2 + 0.166^2} \\\\a = 0.266 \ m/s^2\\\\a = 0.27 \ m/s^2[/tex]

Therefore, the magnitude of the total linear acceleration is 0.27 m/s²

b. 0.27 m/s²

Answer:

yes, shaolin monks can do. you can find tutorials on Youtb

Answer:

A The father should sit closer to the pivot.

C The longer wrench makes the job easier because less force is needed when there is more distance from the pivot.

A As far from the head of the hammer as possible because this will maximize torque.

D at the opposite side of the seesaw towards the middle

:) gl

Explanation:

If a father and his son want to play on a seesaw then to balance the torque of the seesaw the father should sit near the pivot as he had more weight as compared to his son, while the son should sit a little farther from the pivot point as compared to his father.

Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.

Mechanical advantage = output force(load) /input force (effort)

As given in the problem statement If a father and his son wish to play on a seesaw,

The father should sit close to the pivot because he weighs more than his son, and the son should sit a little farther away from the pivot point than his father. This will help balance the torque of the seesaw.

Thus, the father should sit near the pivot on the one side and the son should sit a little farther from the pivot of a seesaw on the other side.

Learn more about Mechanical advantages, here

brainly.com/question/16617083

#SPJ2

Answer:

The probability that it will take a week for it three wet weather on 3 separate days is 0.06166 and its standard deviation is 0.9447

Explanation:

We are given that A city of Punjab has 15 percent chance of wet weather on any given day.

So, Probability of wet weather = 0.15

Probability of not being a wet weather = 1-0.15 =0.85

We are supposed to find probability that it will take a week for it three wet weather on 3 separate days

Total number of days in a week = 7

We will use binomial over here

n = 7

p =probability of failure = 0.15

q = probability of success=0.85

r=3

Formula :[tex]P(r=3)=^nC_r p^r q ^{n-r}[/tex]

[tex]P(r=3)=^{7}C_{3} (0.15)^3 (0.85)^{7-3}\\P(r=3)=\frac{7!}{3!(7-3)!} (0.15)^3 (0.85)^{7-3}\\P(r=3)=0.06166[/tex]

Standard deviation =[tex]\sqrt{n \times p \times q}[/tex]

Standard deviation =[tex]\sqrt{7 \times 0.15 \times 0.85}[/tex]

Standard deviation =0.9447

Hence The probability that it will take a week for it three wet weather on 3 separate days is 0.06166 and its standard deviation is 0.9447

Answer:

The thickness is [tex]t = 1.273 *10^{-7} \ m[/tex]  

Explanation:

From the question we are told that

     The  refractive index of the film  is  [tex]n = 1.37[/tex]

      The wavelength is  [tex]\lambda = 696 \ nm = 696 *10^{-9 } \ m[/tex]

Generally the condition for constructive interference in a film is mathematically represented as

        [tex]2 * t = [m + \frac{1}{2} ] \lambda_k[/tex]

Here t is the thickness of the film , m is the order number (0, 1, 2, 3 ... )

[tex]\lambda _k[/tex] is the wavelength of light that is inside the film , this is mathematically evaluated as

       [tex]\lambda _k = \frac{ \lambda }{ n}[/tex]

       [tex]\lambda _k = \frac{ 696 *10^{-9}}{ 1.37}[/tex]

      [tex]\lambda _k = 5.095 *10^{-7 } \ m[/tex]

So  for  m =  0

     [tex]t = [ 0 + \frac{1}{2} ] \lambda _k * \frac{1}{2}[/tex]

substituting values  

  [tex]t = [ 0 + \frac{1}{2} ] (5.095 *10^{-7}) * \frac{1}{2}[/tex]  

  [tex]t = 1.273 *10^{-7} \ m[/tex]  

Answer:

(a) 10 s

(b) 30 m/s

(c) 150 m

Explanation:

The motorist's position at time t is:

x = 15t

The officer's position at time t is:

x = ½ (3) t² = 1.5 t²

(a) When they have the same position, the time is:

15t = 1.5 t²

t = 0 or 10 s

(b) The officer's speed is:

v = 3t

v = 30 m/s

(c) The position is:

x = 15t = 150 m

Answer:

 E = - dV / dx

Explanation:

The equipotential lines are lines or surfaces that have the same power, therefore we can move in them without carrying out work between equipotential lines, work must be carried out, therefore the electric field changes.

The electric field and the potential are related by

          E = - dV / dx

therefore when the change is faster, that is, the equipotential lines are closer, the greater the electric field must be.

Answer:

B. constant pressure, isothermal, adiabatic

Explanation:

A quantity of an ideal gas is compressed to half its initial volume.

The process may be adiabatic, isothermal or occurring at constant pressure.

Adiabatic-constant heat

Constant pressure or isobaric

Isothermal or constant temperature

An external agent is a system that does work on a system or a machine.

This external agent applies force , or changes the state of the body it is acting on.

In order of the work required of an external agent, least to greatest

The following processes will be arranged.

constant pressure, isothermal, adiabatic

Complete question is;

A force stretches a wire by 0.60 mm. A second wire of the same material has the same cross section and twice the length.

a) How far will it be stretched by the same force?

b) A third wire of the same material has the same length and twice the diameter as the first. How far will it be stretched by the same force?

Answer:

0.15 mm

Explanation:

According to Hooke's Law,

E = Stress(σ)/Strain(ε)

Where E is youngs modulus

Formula for stress is;

Stress(σ) = Force(F)/Area(A)

Formula for strain is;

Strain(ε) = Change in length/original length = (Lf - Li)/Li

We are also told that a second wire of the same material has the same cross section and twice the length.

Thus;

Rearranging Hooke's Law to get the constants on one side, we have;

F/(AE) = ε

Thus from the conditions given;

ε1 = 0.6/Li

ε2 = (Change in length)/(2*Li)

And ε1 = ε2

Thus;

0.6/Li = Change in length/(2*Li)

Li will cancel out and we now have;

Change in length = 2 × 0.6 = 1.2 mm

Finally, we are told A third wire of the same material has the same length and twice the diameter as the first.

Area of a circle;A1 = πd²/4

Now, we are told d is doubled.

Thus, new area of the new circle is;

A2 = π(2d)²/4 = πd²

Rearranging Hooke's Law,we have;

F/A = εE

Since F and E are now constants, we have;

F/E = constant = Aε

Thus;

A1(ε1) = A2(ε2)

A1 = πd²/4

e1 = 0.60/Li

A2 = πd²

e2 = Change in length/Li

Thus;

((πd²/4) × 0.6)/Li = (πd² × Change in length)/ Li

Rearranging, Li and πd² will cancel out to give;

0.6/4 = Change in length

Change in length = 0.15 mm

Answer:

A. 990v/m

B.330x10^-8T

C.2.19x10^-6J/m³

D.1.45x10^-11J

Explanation:

See attached file

Answer:

It is the first one RADIENT TO THERMAL

Explanation:

The heat emitted from the campfires is an an example of radiant energy and thermal energy is refers to the energy contained within a system that is responsible for its tempreture with in this case is the campfires and heat energy being reflected upon your feet.

Answer:

A

Explanation:

Answer:

[tex]I=2.71\times 10^{-5}\ A[/tex]

Explanation:

A 6.0-cm-diameter parallel-plate capacitor has a 0.46 mm gap.  

What is the displacement current in the capacitor if the potential difference across the capacitor is increasing at 500,000V/s?

Let given is,

The diameter of a parallel plate capacitor is 6 cm or 0.06 m

Separation between plates, d = 0.046 mm

The potential difference across the capacitor is increasing at 500,000 V/s

We need to find the displacement current in the capacitor. Capacitance for parallel plate capacitor is given by :

[tex]C=\dfrac{A\epsilon_o}{d}\\\\C=\dfrac{\pi r^2\epsilon_o}{d}[/tex], r is radius

Let I is the displacement current. It is given by :

[tex]I=C\dfrac{dV}{dt}[/tex]

Here, [tex]\dfrac{dV}{dt}[/tex] is rate of increasing potential difference

So

[tex]I=\dfrac{\pi r^2\epsilon_o}{d}\times \dfrac{dV}{dt}\\\\I=\dfrac{\pi (0.03)^2\times 8.85\times 10^{-12}}{0.46\times 10^{-3}}\times 500000\\\\I=2.71\times 10^{-5}\ A[/tex]

So, the value of displacement current is [tex]2.71\times 10^{-5}\ A[/tex].