A compound that has a sea of delocalized electrons has what type of bonding?

Answers

Answer 1

Answer:

Metallic Bonding

Explanation:

Metallic Bonding

In metallic bonds, the valence electrons from the s and p orbitals of the interacting metal atoms delocalize. That is to say, instead of orbiting their respective metal atoms, they form a “sea” of electrons that surrounds the positively charged atomic nuclei of the interacting metal ions.


Related Questions

brainliest to whoever gets it the soonest, what SI unit do you use to measure the length of a book, and what tool and unit for the volume of a box?

Answers

The most appropriate SI unit used to measure the length of a book would be Centimeters.

The most appropriate SI unit to use for the volume of a book is centimeters cubed

PS: I am also a JoJo fan

Answer:

The SI unit of volume is the cubic meter (m 3 ), which is the volume occupied by a cube that measures 1 m on each side. This very large volume is not very convenient for typical use in a chemistry laboratory. A liter (L) is the volume of a cube that measures 10 cm (1 dm) on each side.

What element is depicted by the following electron configuration:


Answers

you can determine this by

adding the numbers of the sub-shells, 2+2+6+2+4=16the number on the last sub-shell, 4 means on the 4th main groupthe 3 before 3p4, tells us on the 3rd period, so the answer is Sulphur.

If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL

Answers

Hey there!:

Mass = 0.6 g

Density = 0.0012 g/mL

Volume = ??

Therefore :

Density = mass / Volume

0.0012 = 0.6 / V

V = 0.6 / 0.012

V = 500 mL

Hope this helps!

Does Na2 gas posses metallic character? Explain your answer..​

Answers

Explanation:

It contains Na2 molecules and the atoms in this molecule are held together by a purely covalent bond because the electronegativity of the two atoms is identical.Metallic bonding would not kick in until you make clusters of quite a few atoms. Such clusters would likely not be very stable because thermodynamically the larger the clump of material the more stable it gets. So they tend to coalesce until you have chunk of metal.Metallic bonding is in a sense a form of covalent bonding, but it is very collective (delocalized over a great many atoms) and electron deficient (there are more states than electrons to fill them up with, leading to conductive properties. This means that “a metallic bond” is a bit of an oxymoron like a forest with only one tree.

Reply me in comments

Yes, Na2 gas possesses a metallic character.

Does NA contain metallic bonds?

In the stable state, metal sodium functions as an array of Na+ ions which can be surrounded by way of a sea of 3s electrons. However, it would be wrong to consider metal sodium as an ion when you consider that the ocean of electrons is shared by using all of the sodium cations, quenching the nice fee.

Sodium most effective has one valence electron. So, in metallic bonding, it is able to only donate one electron to be delocalized at some point of the structure. In steel bonding, the real bonding is the electrostatic force between the effective cations and the delocalized electrons.

Learn more about metallic bonds here: https://brainly.com/question/20536777

#SPJ2

Please help, this assignment is to hard for me. :(

Answers

Answer:

603000 J

Explanation:

The following data were obtained from the question:

Energy required (Q) =...?

Mass (M) = 10000 g

Specific heat capacity (C) = 2.01 J/g°C

Overheating temperature (T2) = 121°C

Working temperature (T1) = 91°C

Change in temperature (ΔT) =.?

Change in temperature (ΔT) =T2 – T1

Change in temperature (ΔT) = 121 – 91

Change in temperature (ΔT) = 30°C

Finally, we shall determine the energe required to overheat the car as follow:

Q = MCΔT

Q = 10000 × 2.01 × 30

Q = 603000 J

Therefore, 603000 J of energy is required to overheat the car.

1.) Given 30 grams of CO2, how many moles of CO2 would you have? How many individual molecules of CO2 is that?
2., Given 22 Grams of NaCl, How many moles of Nacl would you have? How many individual molecules of NaCl is that?
3.) Given 50 grams of ammonia NH3, How many moles of NH3 would you have? How many Molecules of NH3 is that?​

Answers

Answer:

1a) .68 moles 1b)4.1E-23 molecules.

2a) .37 moles 2b) 2.27E-23 molecules

Explanation:

1a) CO2 is equal to 44 grams (C→12 grams,O→16 grams[·2]) .30g/44g is .68 moles.

1b) multiply 1A by advogadros number (6.022E-23)

2a) NaCl is 58 grams. 22/58 is .37 moles.

2b) multiply 2A by advogadros number.

you'd answer #3 the same way #1 and #2

The branch of science that deals with chemicals and bonds are called chemistry. The moles are units to calculate the quantity required to use the element.

The correct answer is mentioned below.

What are moles?The mole is the base unit of the amount of substance in the International System of Units (SI). It is defined as exactly 6.02214076×10^23 elementary entities which may be atoms, molecules, ions, or electrons.

According to the question, the moles to the option is as follows:-

moles of 30 grams of CO2 is

[tex]n =\frac{M}{M.M}\\ \\\frac{30}{44} \\\\=0.681\\\\[/tex]

The number of molecules is [tex]0.68 *6022*10^{23} =4.09496*10^{23[/tex].

2. moles of 22 grams of NaCl is

[tex]\frac{22}{44}\\ \\=0.5\\\\[/tex]

Molecules will be [tex]0.5*6.022*10^{23} = 3.011*10^{23}[/tex]

3. moles of 50-gram ammonia

[tex]\frac{50}{17} \\\\2.94\\[/tex]

The number of molecules is [tex]2.94*6.022*10^{23} = 1770*10^{23[/tex]

For more information about the moles, refer to the link:-

https://brainly.com/question/15209553

Which of the following is NOT a product of the electrolysis of NaCl? A. Chlorine gas B. None of these C. Hydrogen gas D. Oxygen gas

Answers

Answer:D. Oxygen gas

Explanation: because the experiment showed

Choose all the answers that apply
Protons:
Have a positive change
Have no change
Are found in the nucleus
Orbit the nucleus
Have a negative charge

Answers

I think the answer is
Protons have a positive charge
Are found in the nucleus

I hope this helps :)

A gas has a volume of 25.0 mL at 2.50 atm. What is the volume at 457 mmHg if the temperature remains constant?

Answers

Answer:

≈ 0.104 liters  

Explanation:

We can use Boyle's Law: [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]

P₁ = 2.50 atm

V₁ = 25.0 mL

P₂ = 457 mmHg

V₂ = ?

Because pressure should be in atm we will convert 457 mmHg to units in atm:

1 atm = 760mmHg so we can divide 457 by 760 and we get ≈ 0.601atm

Next we can plug in the units to the equation for Boyle's Law:

(2.50)(25.0) = (0.601)(V₂)

Solve for V₂

V₂ will give you ≈ 104mL or 0.104L

Either is correct depending on which unit they are asking you to use

Which element increases its oxidation number in this reaction? 3KOH + H3PO4 → K3PO4 + 3H2O

Answers

Answer:

The answer is "no changes in oxidation number "

Explanation:

Given equation:

[tex]3KOH + H_3PO_4 \longrightarrow K_3PO_4 + 3H_2O[/tex]

In the above-given equation, there are no changes in the oxidation number which can be defined as follows but first we defined the oxidation: In the chemical process, it requires the transfer of ions is oxidation. In particular, it means that products that supply electrodes are oxidized. In the given equation, when 3Potassium hydroxide reacts with phosphoric acid it will produce potassium phosphate and 3 moles of water.

 

What mass of Fe(OH)3 is produced when 35 mL of 0.250 M Fe(NO3)3 solution is mixed with 55 mL of a 0.180 M
KOH solution? (this is a limiting reactant problem).

Answers

Answer:

0.35 g.

Explanation:

We'll begin by calculating the number of mole of Fe(NO3)3 in 35 mL of 0.250 M Fe(NO3)3 solution.

This is illustrated below:

Molarity of Fe(NO3)3 = 0.250 M

Volume = 35 mL = 35/1000 = 0.035 L

Mole of Fe(NO3)3 =?

Molarity = mole /Volume

0.250 = mole of Fe(NO3)3 / 0.035

Cross multiply

Mole of Fe(NO3)3 = 0.25 x 0.035

Mole of Fe(NO3)3 = 8.75×10¯³ mole

Next, we shall determine the number of mole of KOH in 55 mL of 0.180 M

KOH solution. This is illustrated below:

Molarity of KOH = 0.180 M

Volume = 55 mL = 55/1000 = 0.055 L

Mole of KOH =.?

Molarity = mole /Volume

0.180 = mole of KOH /0.055

Cross multiply

Mole of KOH = 0.180 x 0.055

Mole of KOH = 9.9×10¯³ mole.

Next, we shall write the balanced equation for the reaction. This is given below:

3KOH + Fe(NO3)3 —> Fe(OH)3 + 3KNO3

From the balanced equation above,

3 moles of KOH reacted with 1 mole of Fe(NO3)3 to produce 1 mole of Fe(OH)3.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

3 moles of KOH reacted with 1 mole of Fe(NO3)3.

Therefore, 9.9×10¯³ mole of KOH will react with = (9.9×10¯³ x 1)/3 = 3.3×10¯³ mole of Fe(NO3)3.

From the above illustration, we can see that only 3.3×10¯³ mole out of 8.75×10¯³ mole of Fe(NO3)3 given is needed to react completely with 9.9×10¯³ mole of KOH.

Therefore, KOH is the limiting reactant and Fe(NO3)3 is the excess reactant.

Next, we shall determine the number of mole of Fe(OH)3 produced from the reaction.

In this case, we shall use the limiting reactant because it will give the maximum yield of Fe(OH)3 as all of it is consumed in the reaction.

The limiting reactant is KOH and the mole of Fe(OH)3 produce can be obtained as follow:

From the balanced equation above,

3 moles of KOH reacted to produce 1 mole of Fe(OH)3.

Therefore, 9.9×10¯³ mole of KOH will react to produce = (9.9×10¯³ x 1)/3 = 3.3×10¯³ mole of Fe(OH)3.

Finally, we shall convert 3.3×10¯³ mole of Fe(OH)3 to grams. This can be obtained as follow:

Molar mass of Fe(OH)3 = 56 + 3(16 + 1) = 56 + 3(17) = 107 g/mol

Mole of Fe(OH)3 = 3.3×10¯³ mole

Mass of Fe(OH)3 =?

Mole = mass /Molar mass

3.3×10¯³ = Mass of Fe(OH)3 / 107

Cross multiply

Mass of Fe(OH)3 = 3.3×10¯³ x 107

Mass of Fe(OH)3 = 0.3531 ≈ 0.35 g.

Therefore, 0.35 g of Fe(OH)3 was produced from the reaction.

3.0 cm x 4.0 cm x 1.0 cm

[?]cm^3​

Answers

Explanation:

Hi there!!

you asked to multiply these all right,

you can simply multiply it ,

=3cm × 4 cm × 1cm

= 12cm^2×1cm (4×3=12)

= 12cm^3 (12×1=12)

Therefore, theanswer is 12 cm^3.

Hope it helps..

What is the independent variable of Smithers experience?

Please help controls and variables simpson? Smithers thinks that a special juice will increase the productivity of workers. He creates two groups of 50 workers each and assigns each group the same task (in this case, they're supposed to staple a set of papers). Group A is given the special juice to drink while they work. Group B is not given the special...

Answers

Answer:

Smithers thinks that a special juice will increase the productivity of workers. He creates two groups of 50 workers each and assigns each group the same task (in this case, they're ... Group A is given the special juice to drink while they work. Group ... 1. Control Group. Group B. 2. Independent Variable. volume of special juice.

Explanation:

Answer:

1. Group B

2. The juice

3. The number of stacks of paper

4. the juice did not help improve a quicker process

5. Group A can be given the juice, Group B can be given the juice without the special ingredient

USE QUIZLET FLASH CARDS IT CAN HELP YOU WITH A LOT OF QUESTION

How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer. ResetHelp Olive oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank. monounsaturated fats, while canola oil has about Olive oil has about blank monounsaturated fats, while canola oil has about blank.. Olive oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank. polyunsaturated fats, while canola oil has about Olive oil has about blank polyunsaturated fats, while canola oil has about blank..

Answers

This question is incomplete, here´s the complete question.  

How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right.

Olive oil has about ____ monounsaturated fats, while canola oil has about ___.

Olive oil has about ___ polyunsaturated fats, while canola oil has about ___.

6%

10%

30%

84%

5%

65%

Answer:

Olive oil has about 84% monounsaturated fats, while canola oil has about 65%.

Olive oil has about 5% polyunsaturated fats, while canola oil has about 30%.

Explanation:

Olive and canola oil are the major sources of monounsaturated fatty acids. Although vegetable oils usually have high concentrations of polyunsaturated fatty acids and less monounsaturated fats, olive and canola oils have comparatively less polyunsaturated fatty acids, and more monounsaturated fatty acids.

begging u to answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds

Answers

Answer:

a-Interatomic bonds

Explanation:

First of all, it is not a force. Let alone be molecular force.

Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple ball in the center surrounded by overlapping concentric black ovals, each with a small green ball on each of the 6 ovals. What experimental evidence led to the development of this atomic model from the one before it? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them.

Answers

Answer:

A few of the positive particles aimed at a gold foil seemed to bounce back.

Explanation:

Rutherford's experiment took the search for the structure of the atom a step further. In this experiment, a narrow beam of alpha particles emitted from a source was used to bombard a thin gold foil.

The scattering of the alpha particles was detected by a movable ZnS screen. It was found that most of the alpha particles followed a straight path through the gold foil but some were scattered through large angles and some even scattered backwards.

Following this experiment, Rutherford decided on his planetary model of the atom in which the nucleus is at the core of the atom with electrons moving round the nucleus in orbits. Rutherford was awarded a Nobel prize for this work.

Answer:

a

Explanation:

edge 2020

why does a desert cooler better on a hot dry day

Answers

Answer:On a hot dry day humidity will be less.when humidity decreases rate of evaporation increases

Answer:

The water that evaporates from a desert cooler takes in energy from the environment for filling up for the loss of energy during EVAPORATION making the environment cold.

Therefore, on a hot dry day, the Evaporation is more which means the environment will be colder.

Explanation:

I hope it is okay.

I learnt it last year, so I went back to my book and explained it better in my own way.

Thanks.

What is the formula of the ion hydrogen sulfite, which has a charge of -1

Answers

H2S^-1

the 2 is small below
-1 is small above

im sorry due to my typing error

There are two types of ions in chemistry, one is cation and the other is anion. Anion is the negative charge ion. Therefore, the formula of hydrogen sulfite ion is HSO₃⁻

What is chemical Compound?

Chemical Compound is a combination of ions, ions forms by combination of element and element forms by combination of atoms in fixed proportion.

According to our question the chemical compound from which hydrogen sulfite ion is coming is sulfurous acid that is H₂SO₃. So to get hydrogen sulfite ion we need to remove one hydrogen ion that is H⁺ from the chemical compound sulfurous acid.

The balanced reaction is

H₂SO₃[tex]\rightarrow[/tex]H⁺ + HSO₃⁻

From above reaction we can see that the charge over hydrogen sulfite ion is -1

Therefore the formula of hydrogen sulfite is HSO3-

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ6

What three things are required for a fire to start?

Answers

Oxygen, heat, and fuel I’m pretty sure
HOPE THIS HELPED!

11. Samantha was asked to measure out 10 g of salt in a lab. She mistakenly measures out 15 g instead. Calculate
the percent error. Make sure your answer has the correct number of significant figures!

Answers

Answer:

50%

Explanation:

Expected measurement required = 10g

Actual measurement observed = 15g

The percentage error is given as proportion the difference between the actual and expected measurement or values and the expected value value expressed as a percentage.

[(Actual - Expected) / Expected] × 100%

[(15 - 10) / 10)] × 100%

(5 / 10) × 100%

0.5 × 100%

50%

Therefore, the percentage error in the measurement is 50%

Is this example of a direct proportion or an inverse proportion?

A. Direct proportion

B. inverse proportion

Answers

Answer:

Inverse proportion occurs when one value increases and the other decreases. For example, more workers on a job would reduce the time to complete the task. They are inversely proportional.

Answer:

A

Explanation:

Si se usa 450 gramos de carbonato de calcio para dicho proceso ¿Qué volumen de CO2 se obtendrá, si la presión es de 8 atm y la temperatura 200°C? R=0,082 atm.L/mol.K

Answers

Respuesta:

21.8 L

Explicación:

Paso 1: Escribir la reacción balanceada

CaCO₃ ⇒ CaO + CO₂

Paso 2: Convertir 450 g de CaCO₃ a moles

La masa molar de CaCO₃ es 100.09 g.

450 g × (1 mol/100.09 g) = 4.50 mol

Paso 3: Calcular los moles de CO₂ que se forman a partir de 4.50 moles de CaCO₃

La relación molar de CaCO₃ a CO₂ es 1:1. Los moles de CO₂ formados son 1/1 × 4.50 mol = 4.50 mol.

Paso 4: Convertir la temperatura a Kelvin

Usaremos la siguiente expresión.

K = °C + 273.15 = 200°C + 273.15 = 473 K

Paso 5: Calcular el volumen de CO₂

Usaremos la ecuación del gas ideal.

P × V = n × R × T

V = n × R × T / P

V = 4.50 mol × (0.082 atm.L/mol.K) × 473 K / 8 atm

V = 21.8 L

Which of these scientist is know for his work in understanding climate change a : edwin hubble b : christian doppler c : warren washington d : charles kuen kao

Answers

Answer: just trust me its c

Explanation: i dont cap

Polymers formed from amino acids are called _____. proteins carbohydrates lipids nucleic acids

Answers

Answer:

Proteins

Explanation:

Amino acids act as monomers (a single unit used to form polymers) , the polymer will be a long chain of individual amino acids. An amino acid chain forms a protein. These proteins are also known as peptides.

Hope this helps and please mark as the brainliest.

The pOH of a solution is 3.1. Which of the following is true about the solution? (1 point)

It is acidic and has a pH of 10.9.

It is basic and has a pH of 10.9.

It is acidic and has a pH of 6.2.

It is basic and has a pH of 6.2.

Answers

Answer:

The answer is option B

Explanation:

To solve the question above we must first find the pH of the solution using the formula

pH + pOH = 14

pOH = 3.1

So we have

pH + 3.1 = 14

pH = 14 - 3.1

pH = 10.9

Since it's pH is 10.9 the solution is a basic solution since it's pH lies in the basic region.

Hope this helps you

4. (01.05 MC)
Rubbing alcohol evaporates from your arm quickly, leaving a cooling effect on your skin. How do the molecules of gas compare to the molecules as a liquid? (4 points)
The gas particles move faster, have the same molecular composition, and have weaker attractions between them than the liquid particles
The gas particles move faster than the liquid particles, and the bonds of the molecules are broken during evaporation to allow gas atoms to spread apart.
The gas particles move slower but have the same molecular structure and the same attraction between them as the liquid particles.
The gas and liquid particles move at the same speed, but the bonds of the molecules are broken during evaporation to allow the gas atoms to spread apart

Answers

Answer:

The correct option is;

The gas particles move faster, have the same molecular composition, and have weaker attractions between them than the liquid particles

Explanation:

The properties of the gas molecules in comparison to liquids are

1) The gas molecules are widely spread out

2) After evaporation and while in conditions favorable to the gaseous state, the kinetic energy of a gas is larger than the inter molecular attractive forces

3) A gas fills the container in which it is placed

For liquids

1) There are strong intermolecular forces holding the molecules together in a liquid

2) Liquid attractive forces in a liquid are strong enough to hold neighboring molecules

3) The volume of a liquid is definite.

Lavoisier developed a new theory of combustion that overturned the phlogiston theory. What measurements were central to his theory, and what key discovery did he make?

Answers

Answer:

Lavoiser proposed a theory in charge of writing the combustion correctly, denying the phlogiston.

Lavoiser said that combustion is carried out in a medium where there is oxygen, giving as a product water and carbon dioxide.

This combustion results in the decrease in the volume of the material that burns.

Furthermore lavoiser discovered the importance of oxygen in animal respiration.

Explanation:

Lavoisier argued that if or if the presence of oxygen must be present, it is an irreversible and spontaneous process.

When two ionic compounds are dissolved in water, a double replacement reaction can... Group of answer choices occur if two of the ions form an insoluble ionic compound, which precipitates out of solution occur if the ions react to form a gas, which bubbles out of the solution never occur since all ions are in water occur if the ions react to form a gas, which bubbles out of the solution ionic compounds only react with nonmetals

Answers

Answer:

occur if two of the ions form an insoluble ionic compound, which precipitates out of solution

Explanation:

When two ionic compounds are dissolved in water, a double replacement reaction takes place if two of the ions form an insoluble ionic compound, which precipitates out of solution. In double displacement reaction ions switch partners. And hence, produce an insoluble precipitate.

A student made the Lewis dot diagram of a compound as shown. Mg is written with two dots shown on its top. Cl is written on the right side of Mg. Cl has seven dots around it. An arrow is shown from one dot on Mg toward the vacant space around Cl. Another arrow is shown from the other dot on Mg toward the vacant space around Cl. On the top, the art title is written as Students Lewis Dot Model. What is the error in the Lewis dot diagram?

Answers

Answer:

The dots were not properly located and arrows are not used in Lewis structures

Explanation:

If we intend to write a Lewis structure for a compound, that lewis structure must consist of only dots. These dots actually show the valence electrons on the outermost shell of the molecule.

We do not involve arrows when writing dot electron structures for compounds. The valence electrons of magnesium ought not to be written together because they are not a lone pair, rather they are two unpaired electrons. The use of an arrow suggests a coordinate covalent bond which is not the case here.

The correct lewis structure for MgCl2 is shown in the image attached to this answer.

Answer: B is the answer took the test

Explanation: both electrons of Mg should be transferred to one O atom...

What is 16.30 to the 100th gram

Answers

Answer:

1.65485688 × 10121 grams

Explanation:

Aside from those discrete items, anything like rice or flour can be measured out to make up 100 grams. For example, 1/2 cup (125 ml or about 4 and 1/2 fl. oz) of dry rice weighs very close to 100 grams.

Other Questions
When 1604 J of heat energy is added to 48.9 g of hexane, C6H14, the temperature increases by 14.5 C. Calculate the molar heat capacity of C6H14. changed its estimates to a total useful life of 5 years with a salvage value of $81000. What is 2021 depreciation expense? What number is halfway between 250 and 300 One stool rocks slightly from side to side on your kitchen floor. Which of the two stools could this possibly be? Explain your answer Choices: 3 legged stool, 4 legged stool Question 11 pts1. The perspective of historical thinkers, such as historians,archeologists, and anthropologists can be skewed or distorted bya)animismb)perceptionc)biasd)data Company a samples 16 workers, and their average time with the company is 5.2 years with a standard deviation of 1.1. Company b samples 21 workers and their average time with the company is 4.6 years with a standard deviation 4.6 years The period of a pendulum is the time it takes the pendulum to swing back and forth once. If the only dimensional quantities that the period depends on are the acceleration of gravity, g, and the length of the pendulum, , what combination of g and must the period be proportional to? (Acceleration has SI units of m s-2.) building that has a market value of $366,000; the partnership assumes responsibility for a $133,000 note secured by a mortgage on the property. Monroe invests $108,000 in cash and equipment that has a market value of $83,000. For the partnership, the amounts recorded for Fontaine's Capital account and for Monroe's Capital account are:\ Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple ball in the center surrounded by overlapping concentric black ovals, each with a small green ball on each of the 6 ovals. What experimental evidence led to the development of this atomic model from the one before it? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them. please help me on this Will mark the brainliest And thank you:) Write a method named coinFlip that accepts as its parameter a string holding a file name, opens that file and reads its contents as a sequence of whitespace-separated tokens. Assume that the input file data represents results of sets of coin flips. A coin flip is either the letter H or T, or the word Heads or Tails, in either upper or lower case, separated by at least one space. You should read the sequence of coin flips and output to the console the number of heads and the percentage of heads in that line, rounded to the nearest whole number. If this percentage is 50% or greater, you should print a "You win!" message; otherwise, print "You lose!". For example, consider the following input file: H T H H T Tails taIlS tAILs TailS heads HEAds hEadS For the input above, your method should produce the following output: 6 heads (50%) You win! if a 1-m diameter sewer pipe is flowing at a depth of 0.4 m and has a flow rate of 0.15 m^3/s, what will be the flow rate when the pipe flows full? This morning, Jeff found an aged bond certificate lying on the street. He picked it up and noticed that it was a 50-year bond that matured today. He presented the bond to the bank teller at his local bank and received payment for both the entire principal and the final interest payment.The bond that Jeff found must have been which one of the following?a. Debentureb. Callable bondc. Registered-form bondd. Note Bearer-form bond Why might Northern Italy have been a good place for the Renaissance to begin? its central location in Europe its location in Asia its proximity to the Mediterranean Sea its small size compared to other countries A 1.00-kg glider attached to a spring with a force constant 25.0 N/m oscillates on a frictionless, horizontal air track. At t = 0, the glider is released from rest at x = -2.80 cm (that is, the spring is compressed by 2.80 cm). (a) Find the period of the glider's motion. How does the period depend on the mass and the spring constant? Does it depend on the amplitude of oscillation? s (b) Find the maximum values of its speed and acceleration. speed m/s acceleration m/s2 (c) Find the position, velocity, and acceleration as functions of time. (Where position is in m, velocity is in m/s, acceleration is in m/s2, and t is in s. Use the following as necessary: t.) x(t) = v(t) = a(t) = definition of region Solve the equation (If possible please show work) Which statement correctly compares the "Analysis" and "Conclusion" sections of a lab report? The pOH of a solution is 3.1. Which of the following is true about the solution? (1 point) It is acidic and has a pH of 10.9. It is basic and has a pH of 10.9. It is acidic and has a pH of 6.2. It is basic and has a pH of 6.2.