Answer:
[tex]L=1.07\ \mu H[/tex]
Explanation:
Given that,
No of turns in a coiled telephone cord is 65
The diameter of the coil, d = 1.3 cm = 0.013 m
Radius, r = 0.0065 m
Unstretched length of the coil, l = 65.5 cm = 0.655 m
We need to find the inductance of one conductor in the unstretched cord. The formula for the inductance is given by :
[tex]L=\dfrac{\mu_oN^2 A}{l}\\\\L=\dfrac{4\pi \times 10^{-7}\times (65)^2\times \pi (0.0065)^2}{0.655 }\\\\L=1.07\times 10^{-6}\ H\\\\L=1.07\ \mu H[/tex]
So, the inductance of one conductor in the unstretched cord is [tex]1.07\ \mu H[/tex].
The modulus of elasticity for a ceramic material having 4.7 vol% porosity is 317 GPa. (a) Calculate the modulus of elasticity (in GPa) for the nonporous material.
Answer:
The answer is below
Explanation:
a) Given that the modulus of elasticity (E) = 317 GPa, to find the modulus of elasticity (in GPa) for the nonporous material ([tex]E_o[/tex]), we use the formula:
[tex]E_0=\frac{E}{1-1.9P+0.9P^2}\\\\where\ P=4.7\%=0.047,hence:\\\\ E_0=\frac{317}{1-1.9(0.047)+0.9(0.047)^2}\\\\E_0=347.3\ GPa[/tex]
b) If the porosity P = 11.1%, then the modulus of elasticity is:
[tex]E=E_0(1-1.9P+0.9P^2)=347.3(1-1.9(0.111)+0.9(0.111)^2)=278\ GPa[/tex]
Which sequence shows electromagnetic waves arranged in a decreasing order of their wavelengths?
Answer: Gamma rays, x-rays, ultraviolet rays, visible light, and infrared rays.
Answer:
C) radio → infrared → ultraviolet → gamma
Explanation:
It Increases left to right therefore it decreases right to left
What is the momentum of 100 kg running at 4m/s north?
How does temperature effect density and the flow of convection currents?
Answer:
Convection
Explanation:
Convection is heat transfer due to a density differential within a fluid. As water's temperature increases in the presence of a heat source, it will become less dense and rise. As it moves up and away from the heat source, it cools and becomes more dense and sinks.
Calculate the ideal mechanical advantage of a pair of scissors where the length of the blade is 5 cm and the length of the handle is 2.5 cm.
Answer:
m = 0.5
Explanation:
Given that,
The length of the blade of scissors = 5 cm
The length of the handle = 2.5 cm
Here, effort arm is 2.5 cm and load arm is 5 cm. The mechanical advantage is the ratio of effort arm to the load arm as follows :
[tex]m=\dfrac{2.5}{5}\\\\m=0.5[/tex]
So, the ideal mechanical advantage of a pair of scissors is 0.5.
A solid keeps its shape due to which of the following factors?
Space between particles
Attractive forces between particles
The type of element in the solid
The container it is placed in
Answer:
c
Explanation:
because whatever elements are used like gas uses water evaporation so yeah
Answer:
(A) Space between particles!
Explanation:
Solids can hold their shape because their molecules are tightly packed together!
✞ Bye Have A Nice Day! ✞
A baseball is thrown at an angle of 25 degrees relative to the ground at a speed of 23 m/s. If the ball was caught 42 m from the thrower:
What is the initial vertical velocity?
What is the initial horizontal velocity?
How long was it in the air?
How high did the ball travel before being caught?
Answer:
a) [tex] v_{0y} = 9.72 m/s [/tex]
b) [tex] v_{0x} = 20.85 m/s [/tex]
c) [tex] t = 2.01 s [/tex]
d) [tex] h_{max} = 4.82 m [/tex]
Explanation:
a) The initial vertical velocity is given by:
[tex] v_{0y} = v*sin(\theta) [/tex]
Where:
θ: 25°
v: is the magnitude of the speed = 23 m/s
[tex] v_{0y} = 23 m/s*sin(25) = 9.72 m/s [/tex]
b) The initial horizontal velocity can be calculated as follows:
[tex] v_{0x} = v*cos(\theta) = 23 m/s*cos(25) = 20.85 m/s [/tex]
c) The flight time can be calculated using the following equation:
[tex] v_{0x} = \frac{x}{t} [/tex]
Where:
x: is the total distance = 42 m
[tex] t = \frac{x}{v_{0x}} = \frac{42 m}{20.85 m/s} = 2.01 s [/tex]
d) The maximum height is given by:
[tex] v_{fy}^{2} = v_{0y}^{2} - 2gh_{max} [/tex]
Where:
[tex] v_{fy}[/tex]: is the final vertical velocity =0 (at the maximum heigth)
g: is the gravity = 9.81 m/s²
[tex]h_{max} = \frac{v_{0y}^{2}}{2g} = \frac{(9.72 m/s)^{2}}{2*9.81 m/s^{2}} = 4.82 m[/tex]
I hope it helps you!
With this stroke, your hand will be turned about a quarter circle counter-clockwise on the handle of your racquet. Which is the right answer?
A. Half volley
B. Volley
C. Backhand stroke
D.forehand stroke
Answer:
C. backhand stroke
Explanation:
Your hand will be rotated counterclockwise about a fourth of the racquet handle during this stroke. The correct response is to backhand stroke. Option C is correct.
What is a backhand stroke?When playing tennis, a backhand is a stroke in which the player's torso is crossed and the ball is struck with the palm towards the opponent's chest and the back of the hand traveling toward them.
A backhand in tennis can be made with one or both hands.
With this stroke, your hand will be turned about a quarter circle counter-clockwise on the handle of your racquet. Backhand stroke is the right answer.
Hence. option C is correct.
To learn more about the backhand stroke refer;
https://brainly.com/question/16095645
#SPJ2
Full moon is located______
a. farthest from the Sun
b. at a 90 degree angle with the Sun and Earth
c. closest to the Sun
Answer:
Im going to take an educated guess and say its B.
Explanation:
A Full moon is located farthest from the Sun. Thus, the correct option for this question is A.
What is a Full moon?A full moon may be defined as one of the types of lunar phases when the Moon significantly appears fully illuminated from Earth's perspective. This event typically occurred when Earth is located between the Sun and the Moon.
When the earth is located between the sum and the moon, it is the time when the moon is located farthest from the sun. And it directs to an event of a full moon. The average time duration of the full moon and the repetition of the same phase normally requires 29.53 days.
Therefore, the Full moon is located farthest from the Sun. Thus, the correct option for this question is A.
To learn more about the Full moon, refer to the link:
https://brainly.com/question/15032553
#SPJ2
Which chemicals are major contributors to ozone layer destruction? Select two answer choices.
Answer:
what are the answers to select? or do you just say them
Explanation:
???
Answer:
c and d
Explanation:
What is the density of the paint if the mass of a tin containing 5000 cm3 paint is 7 kg. If the mass of the empty tin, including the lid is 0.5 kg.
We are given:
Mass of the Paint bucket (with paint) = 7000 grams
Mass of the paint bucket (without paint) = 500 grams
Volume of Paint in the Bucket = 5000 cm³
Mass of Paint in the Bucket:
To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)
Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)
Mass of Paint = 7000 - 500
Mass of Paint = 6500 grams
Density of the Paint:
We know that density = Mass / Volume
Density of Paint = Mass of Paint / Volume occupied by Paint
Density of Paint = 6500/5000
Density of Paint = 1.3 grams / cm³
When are zeros significant when found in front of (to the left) of the decimal point?
Answer:
If a zero is found between important digits, it is important. Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: , a mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits.
Explanation:
Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: "A mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits."
Hope this comes in handy, have a great day!
a golf ball with a velocity 40 at an angle 45 degree speed of bthe ball after 2 sec
Answer:
Vertical velocity = 8.28 m/s
Horizontal velocity = 28.3 m/s
__________________________________________________________
We are Given:
Initial velocity of the ball = 40 m/s
Angle of elevation of the ball = 45°
Time interval = 2 seconds
__________________________________________________________
Vertical and Horizontal Components:
Vertical Component:
The vertical component of the ball can also be written as:
40*Sin(45°)
40*(1/√2) [since Sin(45°) = 1/√2]
40/√2 m/s
Horizontal Component:
The horizontal component of the ball can also be written as:
40*Cos(45°)
40*(1/√2) [Since Cos(45°) = 1/√2]
40/√2 m/s
__________________________________________________________
Speed of the Ball after 2 seconds:
Horizontal Velocity:
Since the horizontal velocity is not affected by any force during the flight, the horizontal velocity after 2 seconds will also be 40/√2 m/s
Since √2 = 1.41:
Horizontal velocity = 28.3 m/s
Vertical Velocity:
v = u + at [First equation of motion]
v = 40/√2 + (-10)(2)
[g is negative because it is acting against the direction of motion]
v = 40/√2 - 20
v = [tex]\frac{40-20\sqrt{2} }{\sqrt{2} }[/tex] [taking the LCM]
v = 8.28 m/s [√2 = 1.41]
In an experiment, a research collected the following informationabout a solution made from a certain
food. What can we conclude about the food?
• pH = 3.0
• Taste = Sour
A. Acid
B. Base
C. Neutral
D. Salt
Answer:
salt
Explanation:
things that affects the demand for electricity
How long would it take a 500. W electric motor to do 15010 J of work?
How does cold water affect the speed of dissolving?
A. Cold water slows down dissolving
B. Cold water speeds up dissolving
C. Cold water has no effect on dissolving
D. Cold water completely stops dissolving
Answer:
Cold water slows down dissolving
Cold water slows down dissolving. Hence, option (A) is correct.
What is the relationship between the solubility and the temperature?The basic relationship between solubility and temperature is as follows: A solid will dissolve more readily at higher temperatures.
Likewise, a solid element dissolves more slowly at lower temperatures. This is all due to the solvent becoming more and more excited by the heat, making it easier for it to split or break apart entirely.
for while in gases The solubility of gases decreases more rapidly as temperature rises. A gas is more soluble in water when the temperature is lower.
Henry's law, which states that the gas becomes more soluble as the pressure above the liquid solution increases, summarizes another characteristic of gas solutes.
Learn more about solubility here:
https://brainly.com/question/29661360
#SPJ2
Do someone know the answer
30 points! to who helps me out
5. The most dangerous place to use electrical equipment is?
A) indoors
B) outdoors
near water
D
near other electrical equipment
Answer:
c near water
Explanation:
because well let's say you were out in the rain or ur at an outdoor pool swimming and all of a sudden lighting strikes the water while ur in it...... then you would barely be living bc electric touched water
At 96° F the saturation density of air is 0.04 kg/m3. If the weather report says the relative humidity is 90 % when the temperature is 96°F, the humidity is
Answer:
The value is [tex]H = 0.036 \ kg/m^3[/tex]
Explanation:
From the question we are told that
The saturation density of air is [tex]\rho = 0.04 \ kg/m^3[/tex]
The temperature for this saturation density to occur [tex]T_s = 96^o F[/tex]
The relative humidity at this temperature is [tex]R_h = 90\% = 0.90[/tex]
Generally the relative humidity is mathematically represented as
[tex]R_H = \frac{H}{\rho}[/tex]
Here H represents humidity
=> [tex]0.90 = \frac{H}{0.04}[/tex]
=> [tex]H = 0.90 * 0.04[/tex]
=> [tex]H = 0.036 \ kg/m^3[/tex]
An old-fashioned tire swing exerts a force on the branch and a torque about the point where the branch meets the trunk. If you hang the swing closer to the trunk, this will ____ the force and ____ the torque.
Answer:
not change, decrease
Explanation:
Torque refers to the measure of the force that enables an object to rotate about an axis.
An old-fashioned tire swing exerts a force on the branch and a torque about the point where the branch meets the trunk. If you hang the swing closer to the trunk, this will not change the force and decrease the torque.
A tire swing when old can have aa small force. An old-fashioned tire swing exerts a force on the branch and a torque about the point where the branch meets the trunk. If you hang the swing closer to the trunk, this will not change, the force and decrease the torque.
It is stated that when the net force and the net torque are zero, the block is in static equilibrium.IT also state that when the net force is zero, but the net torque is not zero, the object is will not be in static equilibrium
For one too be able to change angular momentum, a torque must act on it over some timeframe.
Learn more from
https://brainly.com/question/22498107
A water molecule is made up of one oxygen and two hydrogen atoms. Why is water considered a pure substance?
Answer:
A mixture is when two or more substances combine physically together.
However, in water, two hydrogen atoms combine with one oxygen atom chemically, forming a new substance that has properties different from hydrogen alone or oxygen alone.
Explanation:
Which action would decrease the strength of attraction between a magnet and an iron object
A. Moving the magnet farther away from the iron object
B. Moving the iron object closer to the magnet
C. Decreasing the number of electrons on the magnet
D. Increasing the number of electrons on the magnet
Answer:
a. moving the magnet farther away and an iron object.
Explanation:
Answer:A
Explanation:
A p e x
Help !! I hate science
Answer:
iron nail rusting
Explanation:
How many bonds can antimony form?
Answer:
An antimony can form 3 bonds
Let me know if this helps
Thanks!
:)
Explanation:
A trip is taken that passes through the following points in order
Point A 0 m
Point B 15.0 m
Point C -30.0 m
Point D -20.0 m
Point E 10.0 m
Point F 5.0 m
What is the distance from Point C to Point F?
Answer:
35, I got you bro, i got you
An artery with cross sectional area of 1 cm2 branches into 20 smaller arteries each with 0.5 cm2 cross sectional area. If the velocity of blood in the thicker artery is v, what is the velocity of the blood in the thinner arteries
Answer:
The velocity of the blood in the thinner arteries is 0.1 times that of the thicker artery.
Explanation:
To find the velocity of the blood we need to use the continuity equation:
[tex] n_{1}A_{1}v_{1} = n_{2}A_{2}v_{2} [/tex] (1)
Where:
n: is the number of branches
A: is the cross-sectional area
v: is the velocity
For artery 1, we have:
n₁ = 1, A₁ = 1 cm², v₁ = v
For the 20 arteries (2), we have:
n₂ = 20, A₂ = 0.5 cm², v₂ =?
By using equation (1):
[tex] n_{1}A_{1}v_{1} = n_{2}A_{2}v_{2} [/tex]
[tex] 1 cm^{2}*v = 20*0.5 cm^{2}*v_{2} [/tex]
[tex] v_{2} = \frac{1 cm^{2}*v}{20*0.5 cm^{2}} = \frac{v}{10} = 0.1v [/tex]
Therefore, the velocity of the blood in the thinner arteries is 0.1 times that of the thicker artery.
I hope it helps you!
PLEASE HELP QUICKLY THANKS
Answer: the answer is d
Explanation:
Ken Griffey, Jr's warehouse shot in the 1933 home run derby travelled 93 feet per second for 5 seconds. How far did he hit the ball?
Answer:
465 feet because 93*5 = 465, btw that was 1993 not 1933
Explanation:
