a circuit shown below is Wheastone Bridge used to determine the valve of unknown resistor X by comparison with three resistors M,N,P whose resistances can be varied. For each setting, the resistances of each resistor is precisely known. With switches k1and k2 closed, these resistors are varied until the current in the galvanometer G is zero; the bridge is then said to be balanced. (a) if the galvanometer G shows zero deflection when M=850.0, N=15.00 and P=33.48, what is the unknown resistance X?

Answers

Answer 1

Answer:

X = 0.6

Explanation:

The resistance of the unknown resistor can be found by using the formula of the Wheatstone bridge:

[tex]\frac{M}{N}=\frac{P}{X}\\\\\frac{850}{15} = \frac{33.48}{X}\\\\X = \frac{(33.48)(15)}{850}[/tex]

X = 0.6

Hence, the unknown value of resistance is found to be 0.6 units.


Related Questions

A 2000 kg truck has put its front bumper against the rear bumper of a 2500 kg SUV to give it a push. With the engine at full power and good tires on good pavement, the maximum forward force on the truck is 18,000 N.
What is the maximum possible acceleration the truck can give the SUV?
At this acceleration, what is the force of the SUV's bumper on the truck's bumper?

Answers

Answer:

The net magnitude of the force of the SUV's bumper on the truck's bumper is 9120 N.

Explanation:

Concepts and reason

The concept required to solve this problem is Newton’s second law of motion.

Initially, write an expression for the force according to the Newton’s second law of motion. Later, rearrange the expression for the acceleration. Finally, substitute the value of the acceleration obtained to find the new force.

Fundamentals

According to the Newton’s second law of motion, the net force is equal to the product of the mass and the acceleration of an object. The expression for the Newton’s second law of motion is as follows:

F = maF=ma

Here, m is mass and a is the acceleration.

(a)

Rearrange the equation F = maF=ma for a.

a = \frac{F}{m}a=  

m

F

 

Substitute 18,000 N for F and \left( {2300{\rm{ kg + 2400 kg}}} \right)(2300kg+2400kg) for m in the equation a = \frac{F}{m}a=  

m

F

 .

\begin{array}{c}\\a = \frac{{18,000{\rm{ N}}}}{{\left( {2300{\rm{ kg + 2400 kg}}} \right)}}\\\\ = \frac{{18,000{\rm{ N}}}}{{\left( {4700{\rm{ kg}}} \right)}}\\\\ = 3.83{\rm{ m/}}{{\rm{s}}^2}\\\end{array}  

a=  

(2300kg+2400kg)

18,000N

 

=  

(4700kg)

18,000N

 

=3.83m/s  

2

 

 

(b)

Substitute 3.83{\rm{ m/}}{{\rm{s}}^2}3.83m/s  

2

 for a and 2400 kg for m in the equation F = maF=ma .

\begin{array}{c}\\F = \left( {2400{\rm{ kg}}} \right)\left( {3.83{\rm{ m/}}{{\rm{s}}^2}} \right)\\\\ = 9120{\rm{ N}}\\\end{array}  

F=(2400kg)(3.83m/s  

2

)

=9120N

 

Ans: Part a

The maximum possible acceleration the truck can give the SUV is 3.83{\rm{ m/}}{{\rm{s}}^2}3.83m/s  

2

 .

Part b

The net magnitude of the force of the SUV's bumper on the truck's bumper is 9120 N.

The maximum possible acceleration the truck can give the SUV is equal to 4 m/s².

The force of the SUV's bumper on the truck's bumper is 10000N

What is acceleration?

Acceleration of an object can be described as as the change in the velocity of an object w.r.t. time. The acceleration is a vector quantity, contains both magnitude and direction. Acceleration is the second derivative of position w.r.t. time and the first derivative of velocity w.r.t. time.

According to Newton's second law of motion, the force is equal to the product of acceleration and mass of an object.

F = ma

And, a =  F/m

Given, the mass of the ruck , m = 2000 Kg

The mass of the SUV, M = 2500 Kg

The total mass of the both = 2000 + 2500 = 4500 Kg

The maximum force on the trick , F = 18000 N

The maximum acceleration of the truck can give the SUV:

[tex]a_{max} = \frac{F_{max}}{m+M}[/tex]

a = 18000/4500

a = 4 m/s²

The force of the SUV's bumper on the truck's bumper will be:

[tex]F_{max} -f= ma_{max}[/tex]

[tex]f= 18000-2000\times 4[/tex]

[tex]f =10000N[/tex]

Learn more about acceleration, here:

brainly.com/question/3046924

#SPJ5

Which of the following statement regarding electromagnetic waves is FALSE?

a) In vacuum, the wave travels in a straight line.

b) The energy in the wave is proportional to the product of the electric and magnetic fields.

c) The speed of the wave in vacuum is given by c = 1/sqrt ε0μ0

d) The magnetic field is much greater in magnitude than the electric field

Answers

Answer:

hi

Explanation:

your answer is

The energy in the wave is proportional to the product of the electric and magnetic fields.

how to make an uncharged particle positively charged

Answers

Answer:

If a neutral atom gains electrons, then it will become negatively charged. If a neutral atom loses electrons, then it become positively charged.

An AM radio transmitter broadcasts 50.0 kW of power uniformly in all directions. I live 10 km from this station. What is the maximum strength of Electric Field in my house

Answers

Answer:

[tex]E_0=0.173N/C[/tex]

Explanation:

From the question we are told that:

Power [tex]P=50kw=>50*10^3w[/tex]

Distance [tex]d=10km=10000m[/tex]

Generally the equation for Intensity is mathematically given by

[tex]I=\frac{P}{4\pi d^2} w/m^2[/tex]

[tex]I=\frac{50*10^3}{4 \pi 10000^2} w/m^2[/tex]

[tex]I=3.98*10^{-5}w/m^2[/tex]

Generally Intensity is also

[tex]I=\frac{1}{2}cE_0^2e[/tex]

Where

[tex]e=8.854*10^{-12}Nm^2/c^2[/tex]

Therefore

[tex]E_0=\sqrt{\frac{2I}{c *e}}[/tex]

[tex]E_0=\sqrt{\frac{2*3.98*10^{-5}}{3*10^8 *8.854*10^{-12}}}[/tex]

[tex]E_0=0.173N/C[/tex]

Differences between LED and CFL bulb..​

Answers

Explanation:

CFL bulbs were made to take the place of incandescent bulbs, which generate light as a result of heat. ... LED (light-emitting diode) is a type of bulb that produces light using a narrow band of wavelengths. LED lighting is more energy efficient than CFL bulb.

What type of potential energy is a 9 volt battery an example of?
Gravitational potential energy
Elastic potential energy
Electrical potential energy
chemical potential energy​

Answers

Answer:

chemical potential energy​

Explanation:

A 9v battery comes in different formats, such that the most common one is the carbon-zinc and alkaline chemistry, so these are alkaline batteries (there are also rechargeable or lithium batteries, these also depend on chemical interactions).

These batteries "draw" the energy from chemical interactions of the materials inside of it, so the type of potential energy that is stored in a battery is actually chemical (regardless of the fact that the energy can be transformed into electrical energy later) the "potential" refers to how the energy is stored.

Then the correct option is chemical potential energy​

Answer:

Chemical Potential Energy

Explanation:

Hope this helps!!

Have a blessed day/night!! <33

how much is need to lift a load of 100n placed at a distance of 29 cm from fulcrum if effort is applied at 60cm from the fulcrum on opposite side of the load? calculate mechanical advantage and velocity ratio of the lever​

Answers

Answer:

206.8965517 n

Explanation:

First, we need to see that 60:29 is 2.078965517:1. Then we need to multiply the energy put 29 cm from the fulcrum by 2.078965517, giving us the end result of our answer.

A motorcyclist start from rest to reaches 6m/s with uniform acceleration for 3s what his acceleration?​

Answers

Answer:

[tex]\boxed {\boxed {\sf 2 \ m/s^2}}[/tex]

Explanation:

Acceleration is the rate of change in velocity with respect to time. It is calculated by dividing the change in velocity by the change in time. The formula is:

[tex]a= \frac{ \Delta v}{\Delta t}[/tex]         or          [tex]a= \frac{v_f-v_i}{\Delta t}[/tex]

The change in velocity is the difference between the initial velocity and the final velocity. The motorcycle starts at rest, or 0 meters per second and reaches 6 meters per second. The change in time is 3 seconds.

[tex]\bullet \ v_f= 6 \ m/s\\\bullet \ v_i= 0 \ m/s \\\bullet \ \Delta t = 3 \ s[/tex]

Substitute the values into the formula

[tex]a= \frac { 6 \ m/s - 0 m/s}{3 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{6 \ m/s}{3 \ s}[/tex]

[tex]a= 2 \ m/s^2[/tex]

The motorcyclist's acceleration is 2 meters per second squared.

A 771.0-kg copper bar is melted in a smelter. The initial temperature of the copper is 300.0 K. How much heat must the smelter produce to completely melt the copper bar? For solid copper, the specific heat is 386 J/kg • K, the heat of fusion is 205 kJ/kg, and the melting point is 1357 K.

Answers

Answer:

4.73 × 10^5

Explanation:

A ring with an 18mm diameter falls off a scientist's finger into the solenoid in the lab. The solenoid is 25 cm long, 5.0 cm in diameter and has 1500 turns. When turned on, the current in the solenoid is increases linearly to 20 A in 1 second. What is the induced emf in the ring?
a) 2.0 x 10-5 v
b) 3.8 x 10-5 v
c) 1.2 x 10-3 v
d) 1.9 x 10-4 v

Answers

Answer:

the answer should be b) 3.8 x 10-5 v

What is the connection between speed, friction, and radius of the curve when turning when driving a car.

Answers

Answer:

hhhbbbbbbbbbbbbbbnnnnnbbhb

The fact that Voyager 10 continues to speed out of the solar system, even though its rockets have no fuel, is an example of Group of answer choices Newton's third law of motion. Newton's second law of motion. Newton's first law of motion. the universal law of gravitation. none of these

Answers

Answer:

The universal law of gravitation.

PE = m * G M / R^2  potential energy of mass m due to attractive forces

If the kinetic energy of mass m is greater than the energy due to the attractive masses then then mass m can continue indefinitely away from the attracting masses.

Một thang máy chuyển động thẳng đứng hướng xuống dưới chậm dần đều với gia tốc a= -4m/s2. Trần thang máy treo một vật nhỏ bằng một sợi dây mảnh, khoảng cách từ vật tới sàn thang máy h= 2m. Thang máy đang chuyển động thì dây đứt. Tính thời gian từ lúc dây đứt đến khi vật chạm sàn thang máy ? Lấy g= 10m/s2

Answers

Answer:

ejkshdkashalsflasfaksg

A rubber ball and a steel ball are dropped from the same height onto a concrete floor. They have the same mass, and lets assume that they both rebound to the same height after hitting the ground. How would the average forces experienced by the balls compare. Group of answer choices The steel ball would experience the greater average force The average forces would be the same The rubber ball would experience the greater average force

Answers

Answer:

The average forces would be the same

Explanation:

Both have the same velocity on impact as they fell from the same height.

Both have the same velocity after the bounce because they reach the same height.

Both have the same mass

Both will thus experience the same impulse because both have the same change in momentum.

Therefore both experience the same average force.

Which of the following has a negative acceleration?
A. A car increases its speed moving forward.
B. A car sits at rest at a stop sign.
C. A car is slowing down as it approaches a traffic light.
D. A car is in cruise control at a constant speed.

Answers

Answer:

B. A car sits at rest at a stop sign.

Two students try to move a heavy box. One pushes with the force of the 20N while the other pulls with a force of 30N in the same direction. What is the work done by each boy after 10 seconds if the box can\t be moved? Show your equation.

Answers

Answer:

Explanation:

Time is not part of the Work equation. That's the only conclusion that you can come to.

Work = Force * distance.

Not enough information is given to go any further. You don't have enough information to calculate the distance.

We don't know if the box can be moved or not. It says heavy. 50 N is really not very much.

I would guess that you are intended to answer that the box didn't move, but it's really hard to tell.

what do we mean by thrust?

Answers

Answer:

the answer is push example: she thrust her hand into her pocket

Which items are discounted?

—-
Ignore selected.

Answers

Answer:

nail file

facial tissues

body wash

deodorant

shampoo

Explanation:

if I'm going by the discount meaning correctly

An object moving with a constant
acceleration changes its velocity from
10ms' to 20 ms' in five seconds. What is the
distance travelled in five seconds ​

Answers

Answer:

Acceleration:

[tex]{ \tt{a = \frac{v - u}{t} }} \\ { \tt{a = \frac{20 - 10}{5} }} \\ { \tt{a = 2 \: m {s}^{ - 2} }}[/tex]

From third equation:

[tex]{ \bf{ {v}^{2} = {u}^{2} + 2as}} \\ { \tt{s = \frac{ {20}^{2} - {10}^{2} }{2 \times 2} }} \\ = { \tt{s = 75 \: m}}[/tex]

Answer:

Formula = m/s

Explanation:

The answer is 10 m / 5 seconds = 2 meters distance

The answer is 20 m / 5 seconds = 4 meters distance

Suppose you exert a force of 314 N tangential to a grindstone (a solid disk) with a radius of 0.281 m and a mass of 84.2 kg What is the resulting angular acceleration of the grindstone assuming negligible opposing friction

Answers

Answer:

The angular acceleration is 26.6 rad/s^2.

Explanation:

Force, F = 314 N

radius, r = 0.281 m

mass, m = 84.2 kg

The grindstone is a disc.

The torque is given by

torque = force x radius

Torque = 314 x 0.281 = 88.234 Nm

The torque is given by

Torque = Moment of inertia x angular acceleration

[tex]88.234 = 0.5 mr^2 \alpha \\\\88.234 = 0.5\times 84.2\times 0.281\times 0.281\times \alpha \\\\\alpha = 26.6 rad/s^2[/tex]

A scientist who studies the tiny microorganisms of the environment .

geologist
meteorologist
microbiologist
entomologist

Answers

Question:- A scientist who studies the tiny microorganisms of the environment

Answer:- Microbiologist

Explanation:-

Microbiologist means a person who studies micro sized living organisms

Microbiologist word is combination of two words Micro and biologist

Micro stands for objects which cannot be seen with the naked eyes and are very small in sizeBiologist a person who studies living forms.

Answer:

microbiologist i think

hope it helps

please mark Brainliest if you think the answer is correct

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

A light bulb, attached (by itself) to an ideal 10 V battery, becomes hotter as time goes on. The bulb's filament is made of tungsten, a metal, which becomes more resistive as its temperature increases. Which statement below is true?

a. As time goes on and the bulb grows hotter, the voltage across the bulb increases so the bulb would grow brighter.
b. As time goes on and the bulb grows hotter, the current through the bulb increases so the bulb would grow brighter.
c. As time goes on and the bulb grows hotter, the voltage across the bulb decreases so the bulb would grow dimmer.
d. As time goes on and the bulb grows hotter, the current through the bulb decreases so the bulb would grow dimmer.

Answers

Answer:

the correct one is d

Explanation:

The filament of the bulb fulfills the law of ohm

          V = i R

indicate that the filament resistance increases with temperature, as the voltage remains constant if the resistance of the filament increases the current should decrease,

When examining the different statements, the correct one is d

what is the value of x if x-36=5?​

Answers

Answer:

Therefore, the value of x is 41

Explanation:

x=5+36

x=41

Current is a measure of…

Answers

Current is a measure of an Electric current. It’s more then likely C. Hope this helps Good luck !!

Yea, gonna need some help. Thanks

Answers

Answer:

t = 3.48 s

Explanation:

The time for the maximum height can be calculated by taking the derivative of height function with respect to time and making it equal to zero:

[tex]h(t) = -16t^2+v_ot+h_o\\\\\frac{dh(t)}{dt}=0=-32t+v_o\\\\v_o = 32t[/tex]

where,

v₀ = initial speed = 110 ft/s

Therefore,

[tex]110 = 32t\\\\t = \frac{110}{32}\\\\[/tex]

t = 3.48 s


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right


Physics question plz help ASAP

Answers

The Correct answer is D Hope this helps :)
Other Questions
Can you give me a example of creative simile please The tens digit is missing from the three-digit number 8 _ 9. If the tens digit is to be randomly selected from the ten different digits from 0 to 9, what is the probability that the resulting three digit number will be a multiple of 9? How many stereoisomers are possible for CHCl3 provided that the central carbon has a tetrahedral geometry Compare and contrast the cell structures / organelles found in plant and animal cells.list 3 organelle/structures plant and animal cells have that are the samelist 2 organelles/structures plant and animal cells have that are different Need help please I dont get it 99 boys and 1 girl are in a lecture theatre. how many boys must leave the theatre so that the percentage of boys becomes 98%? F(x)=sqrt x -4.find the inverse of f(x) and its domain : Find absolute minimum and maximum values of (, ) = 22 + 4 + 4 On the close triangular region R bounded by the lines = 2, = 0, = 2 Zeitoun went outside, the air humid and gusty. He tied the canoe to the back porch. The water was whispering through the cracks in the back fence, rising up. It was flowing into his yard at an astonishing rate. As he stood, it swallowed his ankles and crawled up his shins. Back inside, he continued to move everything of value upward. As he did, he watched the water erase the floor and climb the walls. In another hour there was three feet of water indoors. And his house was three feet above street level. What conclusion can readers draw about this character vs. nature conflict What isthe vertex of thisabsolute valuefunction? lannigan Company manufactures and sells a single product that sells for $450 per unit; variable costs are $270. Annual fixed costs are $800,000. Current sales volume is $4,200,000. Compute the current margin of safety in dollars for Flannigan Company What is the effect of X on Y? For a data set of the pulse rates for a sample of adult females, the lowest pulse rate is 39 beats per minute, the mean of the listed pulse rates is x=76.0 beats per minute, and their standard deviation is s=13.8 beats per minute. a. What is the difference between the pulse rate of 39 beats per minute and the mean pulse rate of the females? b. How many standard deviations is that [the difference found in part (a)]? c. Convert the pulse rate of 39 beats per minutes to a z score. d. If we consider pulse rates that convert to z scores between 2 and 2 to be neither significantly low nor significantly high, is the pulse rate of 39 beats per minute significant Solve the inequality 5x + 3 2 >48 13. Read the sentence and identify the antecedent that corresponds with the bolded pronoun. In the tenth century, Venetian merchants traveling in the Orient brought the secret of glassmaking to their city. How do political polls contact respondents? One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. heating of gases depends not only on the temperature difference, but also on the process as well as the amount of gas present. heating of gases depends on temperature difference as well as the amount of gas present. specific heat is not defined for gases. heat cannot be exchanged with gases. You are asked to prepare a buffer solution with a pH of 3.50. The following solutions, all 0.100 M, are available to you:HCOOH, CH3COOH, H3PO4, NaCHOO,NaCH3COO, and NaH2PO4. What would be the best combination to make the required buffer solution? Select one: a. NaH2PO4andNaCHOO b. H3PO4 andNaH2PO4 c. NaH2PO4and HCOOH d. CH3COOH andNaCH3COO e. HCOOH andNaCHOO can someone helo me with this A negotiable CD is a: a short-term unsecured promissory note issued by a company to raise funds for a short time period. b loan to an individual or business to purchase a home, land, or other real property. c short-term fund transferred between financial institutions usually for no more than one day. d marketable bank-issued time deposit that specifies the interest rate earned and a fixed maturity date. Help asap! Lia can rent a van for either $90 per day with unlimited mileage or $50 per day with 250 free miles and an extra 25 for each mile over 250. For what number of miles traveled in one day would the unlimited mileage plan save Lia money? (Show work)