Answer:
[tex]\boxed {\boxed {\sf 120 \ or \ 117 \ grams \ H_2O \ depending \ on \ significant \ figures }}[/tex]
Explanation:
We want to convert from moles of water to grams of water.
First, find the molar mass of water (H₂O) Look on the Periodic Table for the masses of hydrogen and oxygen.
Hydrogen (H): 1.008 g/molOxygen (O): 15.999 g/molNext, add up the number of each element in water. The subscript of 2 comes after the H, so there are 2 moles of hydrogen.
2 Hydrogen: (1.008 g/mol*2) = 2.016 g/molFinally, add the molar mass of 2 hydrogen and 1 oxygen.
2.016 g/mol (2 Hydrogen) + 15.999 g/mol (1 oxygen)= 18.015 g/molNext, find the grams in 6.5 moles.
Use the molar mass we just found as a ratio.
[tex]molar \ mass \ ratio: \frac{18.015 \ g \ H_2O}{1 \ mol \ H_2O}[/tex]
We want to find the grams in 6.5 moles. We can multiply the ratio above by 6.5
[tex]6.5 \ mol \ H_2O * \frac{18.015 \ g \ H_2O}{1 \ mol \ H_2O}[/tex]
Multiply. Note that the moles of H₂O will cancel each other out.
[tex]6.5 * \frac{18.015 \ g \ H_2O}{1}[/tex]
[tex]6.5 * {18.015 \ g \ H_2O}[/tex]
[tex]117.0975 \ g \ H_2O[/tex]
If we want to round to the technically correct significant figures, it would be 2 sig figs. The original measurement, 6.5, has 2 (6 and 5).
[tex]\approx 120 \ g \ H_2O[/tex]
HELP ASAP EILL MAKE BRAINLEST Students are conducting a la estimating the time takes for the cell cycle in normal chocols They find that the average time for one complete el cycle is 22 hours What arence would they expect to see nerous chien
Cancerous chicken cels will spend more time in the phase
Cancerous cells will not complete all phases of the cell cyce
Cancerus chin cells will complete moss in a shorter amount of time
O Cancerous chicken cols and normales will have the same total amount of time to complete the cell cycle
Answer: I don't know if this helps but here's some information I think might help.
Usually, cells will take between 5 and 6 hours to complete S phase. G2 is shorter, lasting only 3 to 4 hours in most cells. In sum, then, interphase generally takes between 18 and 20 hours. Mitosis, during which the cell makes preparations for and completes cell division only takes about 2 hours. Calculate the percentage of time spent in each phase by counting the total number of cells in each phase (total in interphase, in prophase, etc.) and dividing each by the total number of cells you counted. How do cancer cells differ in total time required for mitosis? Cancer cells produce 117 minutes faster than regular cells. ... Normal cells require 640 minutes during interphase, cancer cells only need 380. For prophase, cancerous cells need 15 minutes less than regular cells. Another hallmark of cancer cells is their "replicative immortality," a fancy term for the fact that they can divide many more times than a normal cell of the body. In general, human cells can go through only about 40-60 rounds of division before they lose the capacity to divide, "grow old," and eventually die 3.
The main product of the photosynthesis reaction is
OA.
protein.
OB.
sugar.
Oc.
fat.
OD.
DNA.
Answer: Sugar
Explanation: Because after photosynthesis (Carbon dioxide, water, and sunlight) react, they make two products. Glucose (A sugar) and Oxygen.
Which of the following molecules has a central atom with precisely two unshared
pairs of electrons?
What effects do winds patterns have on climate
Prevailing winds bring air from one type of climate to another. For example, warm winds that travel over water tend to collect moisture as they travel; the water vapor in the air will condense as it moves into colder climates, which is why temperate coastal areas often receive heavy rainfall.
Hope it Helps! T^T
convert 80kg into grams
Answer:
80000 grams
Explanation:
kilo means 1000
80 x 1000 = 80, 000
How many molecules are in 4.5 moles of Ca(OH),?
We will use dimensional analysis to solve this.
We will need to know Avogadro's number, which is 6.02 × 10²³.
4.5 mol × [tex]\frac{6.02 * 10^{23} molecules}{1 mol}[/tex] = 2.71 × 10²⁴ molecules.
There are 2.71 × 10²⁴ molecules in 4.5 moles of Ca(OH).
9.25x10^-8 x6.40x10^3 in scientific equation
Answer:
5.92E-4 or 5.92x10^-4
Explanation:
I NEED HELP RN 40 POINTS
Answer:
B.) Adding a source of carbon dioxide to the water.
Explanation:
I had that question too.
_FeBr3 +_H2SO4 --->_Fe2(SO4)3 +_HBr
Answer:
2FeBr₃ + 3H₂SO₄ ⇒ Fe₂(SO₄)₃ + 6HBr
Explanation:
match the products and reactants of both sides.
What is the density of a block with a volume of 5 cm3 and a mass of 20 g?
Answer: 4g/cm^3 or 4000g/L (4kg/L)
Explanation:
I'm not sure what units the question intended so I put both. For the first one, the equation for density is mass/volume so I divided the 20g by 5cm^3 to get 4g/cm^3. Just in case those aren't the intended units for volume and is instead liters, one cm^3 equals one ml. In addition, there are 1000ml in every liter so you can determine the amount per liter by multiplying 4g/ml by 1000 to get 4000g/L or 4kg/L.
I hope this helps.
Sodium chloride (NaCl) is formed in a chemical reaction between sodium (Na) and chlorine (Cl2).
What is sodium chloride?
14.
A.
an element
B.
a mixture
C.
a compound
D.
an atom
Diamonds are formed when carbon is placed under extreme heat and pressure. This process
in caves
in the ocean
In the atmosphere of Earth
beneath the surface of Earth,
Answer:
beneath the surface of Earth
Explanation:
Diamonds are made up of carbon that has been placed under extreme heat and pressure conditions.
These conditions of high pressure and temperature can only be found within the subsurface. As you go deeper to the mantle, the geothermal gradient rises significantly.
Also, the overburden pressure will also be high.
These processes can also occur on other planets and some can be associated to the earth times when the earth was being formed.
The condition at which diamond forms confers some of the distinct natural properties that typifies it.
What can we do with even more scientific knowledge?
Explanation:
Scientific knowledge allows us to develop new technologies, solve practical problems, and make informed decisions, both individually and collectively.
Answer:
If we had more scientific knowledge, we would be able to increase the productivity of life-saving equipment that provides a longer life for us
be able to make more sensible and informed decisions
make more achievements in studies and be more accurate etc..
Hope this helps<3
According to collision and transition state theories, what is the importance of activation energy?
According to the collision theory, the following criteria must be met in order for a chemical reaction to occur: Molecules must collide with sufficient energy, known as the activation energy, so that chemical bonds can break.
Could I have branliest, heart with 5 stars
Thanks and have a happy Christmas
Collision theory expresses that substance responses (in the gas stage) happen because of crashes between reactants.
Importance of activation energy:To really start a reaction, impacts should be adequately lively (dynamic energy) to break compound bonds; this energy is known as the Activation energy. As the temperature rises, atoms move quicker and impact all the more energetically, significantly improving the probability of bond breakage upon crash.
Find more information about Activation energy here:
brainly.com/question/1380484
Which of the following best represents and explains the formula for a compound made from fluorine and hydrogen?
A. HF, because both fluorine and hydrogen are capable of forming only one ionic bond.
B. HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
C. H2F, because fluorine is short of two electrons, and hydrogen is short of one electron.
D. H2F, because fluorine is capable of forming one, and hydrogen is capable of forming two covalent bonds.
Thank you
The answer is B
HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond. The correct option is option B.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion. Covalent bond is weaker than ionic bond.
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron.
The formula for a compound made from fluorine and hydrogen is HF, because both fluorine and hydrogen are capable of forming only one covalent bond.
Therefore, the correct option is option B.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ2
To make a balanced equation, 6 H2O + 6 CO2 ---> C6H12O6 + _
Answer:
6O₂
General Formulas and Concepts:
Chemistry/Biology
Photosynthesis Equation: 6H₂O + 6CO₂ → C₆H₁₂O₆ + 6O₂Explanation:
Most of the equation comes from the Photosynthesis Equation. Plants take in water and carbon dioxide and sunlight (energy) to produce glucose and oxygen. When we balance the equation and predict reaction. we should get 6O₂ as our answer.
How we can preserve the wetlands areas of nepal?
Answer:
Reduce, reuse, and recycle your waste and trash. Protecting the environment helps protect the wetlands, especially since trash can make its way into the water. The best and easiest way to protect the environment is by limiting your household waste.
Mass Number
19
Atomic Number
Elements
Fluorine
Neon
Aluminium
Phosphorus
10
13
15
a. i. Which of the elements would not be capable of forming compounds
Answer:
Explanation:
The atomic number is the number of protons inside the nucleus of an atom. ... 1.1% carbon 13 with 7 neutrons and a mass of 13.00335 u (measured), and a ... The value given is the mass number of the most stable isotope of that element. ... That's because the chemistry of helium is more like neon (Ne), argon (Ar), etc.
Which of the diagrams below shows an atom that is not a form of hydrogen?
Answer:
I believe is the npp i kinda forgot how to do these lol
Diagram with npp type shows an atom that is not a form of hydrogen.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2
51 liters of helium and 29 liters of oxygen (O2), both at 35°C and 1.0
atmosphere, are pumped into a tank that has a volume of 5 liters. Calculate the number
of moles of each component and the total pressure in the tank at 35°C
Answer:
If I have an unknown quantity of gas at a pressure of 1.2 atm, a volume of 31 liters, ... If I contain 3.0 moles of gas in a container with a volume of 60. liters and at a ... Mixtures of helium and oxygen are used in scuba diving tanks to help prevent ... volume of 5.00 Lat 25.0C. Calculate the partial pressure of each gas and the ...
Explanation:
How many kilograms is 0.22 lb?
O A. 0.22 kg
O B. 0.454 kg
C. 0.0998 kg
O D. 0.49 kg
Answer:
C)0.0998kg
explanation:
1 POUND=0.453592...kg
Is a tooth made out of matter or not matter?
Human teeth are made up of four different types of tissues.
When a chemical change occurs:
A) the law of conservation of mass is always obeyed
B) the chemical properties of new substances are different from the ones you started with
C) all of the options are true
D) atoms are rearranged
Answer:
Are composed together
Explanation:
Please help
As the temperature increases, the molecular motion of the molecules decreases and it
becomes difficult to overcome the polar attractions.
a. TRUE
b. FALSE
can yall help me wit this?
Answer:
the color change
what volume of water has a mass of 1 kg
Answer:
[tex]V=0.001\ m^3[/tex]
Explanation:
Mass, m = 1 kg
The density of water, d = 1000 kg/m³
We need to find the volume of water. The formula for the density of an object is equal to mass divided by volume. Its formula is :
d = m/V
V is the volume of water
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{1\ kg}{1000\ kg/m^3}\\\\=0.001\ m^3[/tex]
So, the volume of water is [tex]0.001\ m^3[/tex].
Answer:
Volume of water has a mass of 1 kg is explained below in details.
Explanation:
One liter of h2O has a volume of approximately specifically one kilogram when estimated at its maximum frequency, which happens at about 4 °C. It observes, therefore, that thousand of a liter, recognized as one milliliter (1 mL), of h2O has a volume of about 1 g; 1000 liters of h2O has a volume of about 1000 kg (1 tonne).
CaO + H2O -> Ca(OH)2
3.50g of Ca(OH)2 was made from 4.20g of CaO? What is the % yield of Ca(OH)2?
The % yield of Ca(OH)₂ : 62.98%
Further eplanationPercent yield is the compare of the amount of product obtained from a reaction with the amount you calculated
General formula:
Percent yield = (Actual yield / theoretical yield )x 100%
An actual yield is the amount of product actually produced by the reaction. A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients
Reaction
CaO + H₂O ⇒ Ca(OH)₂
mass CaO= 4.2 g
mol CaO(MW=56,0774 g/mol) :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{4.2}{56,0774 g/mol}\\\\mol=0.075[/tex]
mol Ca(OH)₂ based on mol CaO
mol ratio CaO : Ca(OH)₂,= 1 : 1, so mol Ca(OH)₂ = 0.075
mass Ca(OH)₂(MW=74,093 g/mol) ⇒ theoretical
[tex]\tt mass=mol\times MW\\\\mass=0.075\times 74,093 g/mol\\\\mass=5.557~g[/tex]
% yield :
[tex]\tt =\dfrac{actual}{theoretical}\times 100\%\\\\=\dfrac{3.5}{5.557}\times 100\%\\\\=62.98\%[/tex]
She remembered that chemical equations can summarize what happens in a chemical reaction. What is the name of the two parts found on the left side of the equation below? 4 Fe + 3O2 → 2Fe2O3 A. products B. reactants C. scientific notation D. synthesis
Answer:
The name of the two parts found on the left side of the equation is reactants.
Explanation:
Chemical reaction is the way one substance reacts against another. That is, a chemical reaction is that chemical process in which two or more substances, by the action of an energy factor, are converted into other substances. The new substance (s) that are formed usually present a totally different appearance from that of the starting substances.
In a chemical reaction there are the substances that react, that is, the reactants, and the substances produced, called products.
A chemical reaction is represented by a chemical equation. The formulas of the reactants are written on the left, and those of the products on the right, both separated by an arrow indicating the direction of the reaction.
Reactants ⇒ Products
Then, the name of the two parts found on the left side of the equation is reactants.
The solids and liquids with the strongest intermolecular forces of attraction will have the
lowest melting and boiling points.
a. TRUE
b. FALSE
One gram of salt in swimming pool of water could be considered a _____ solution.
Answer:
Soluable
Explanation:
Because salt dissolves in water.. Your question has no background information to go off of
Answer:
dilute
Explanation:
trustt
