A chemist mixed two substances together: a blue powder with no smell and a colorless liquid with a strong smell. Their repeating groups of atoms are shown below on the left. After they were mixed, the chemist analyzed the results and found two substances. One ending substance had the repeating group of atoms shown below on the right. Is the ending substance the same substance as the blue powder? What happened to the atoms of the starting substances when the ending substances formed

Answer:

Bonding property

Explanation:

Distillation deals with boiling solutions. Therefore the boiling point has a major part to play. Boiling point of a substance deals with the type of bonds present. For example water has hydrogen bonding which is a weak intermolecular force therefore the boiling point of water isn't that high. If we were to focus on an ionic compounds the boiling point would be higher because ionic compounds have ionic bonding which are stronger bonds which therefore requires more energy to break those bonds therefore a higher boiling point.

In this case for the ethanol to distill the property it's focusses on is the bonds. The strength of the bonds really.

Answer:

34545 J

Explanation:

Applying,

E = mc'+cm(t₂-t₁)+Cm(t₂-t₀).............. Equation 1

Where E = Total energy, m = mass of the ice, c' = latent heat of ice, c = specific heat capacity of ice, t₂ = final temperature, t₁ = initial temperature, C = specific heat capacity of water, t₀ = temperature of ice at 0°C

From the question,

Given: m = 35 g = 0.035 kg, t₁ = -10°C, t₂ = 100°C, t₀ = 0°C

Constant: C = 4200 J/kg.K, c = 2100 J/kg.K, c' = 336000 J/kg

Susbtitute these values into equation 1

E = [336000(0.035)]+[0.035×2100(100+10)]+[4200×0.035(100-0)]

E = 11760+8085+14700

E = 34545 J

Answer:

Ionic bond and covalent bond

Explanation:

The two main types of chemical bonding are ionic bond and covalent bond.

In an ionic bond, there is a transfer of electrons from one atom to another. Usually from a metal to a nonmetal leading to the existence of an ion pair. Ionic compounds are soluble in water and have high melting and boiling points due to the strong electrostatic interaction between ions in the compound.

A covalent bond involves sharing of electrons between atoms. In an ordinary covalent bond, the shared electrons are furnished by the two bonding atoms while in a dative covalent bond, the two bonding electrons are furnished by only one of the bonding species.

Answer:

uryehrufurudududjehshsyshzyyxzhsu

Answer:

the value

Explanation:

Answer:

pH = 6

Explanation:

Given that,

The concentration of [OH]⁻ ion is [tex]10^{-6}[/tex].

We need to find the pH of the solution.

We know that,

[tex]pH=-\log[OH]^-[/tex]

Put all the values,

[tex]pH=-\log(10^{-6})\\\\pH=6[/tex]

Hence, the pH of the solution is 6.

Answer:

False.

I just got it right, lol.

The given molecule is an aldehyde with the formula HCHO. It is the simplest and primary aldehyde . Hence, option c is correct.

Aldehydes are a class of organic compounds that contain a carbonyl group (a carbon double-bonded to an oxygen) at the end of a carbon chain. The general formula for an aldehyde is RCHO, where R is a substituent or side chain attached to the carbonyl group.

Aldehydes are often characterized by their distinctive odor, which can be described as pungent and irritating. Some common aldehydes include formaldehyde (used in building materials and as a disinfectant), acetaldehyde (found in alcoholic beverages), and benzaldehyde (used in food flavorings).

Aldehydes are important intermediates in many chemical reactions, and they are used in a variety of industrial and laboratory applications. They can be synthesized by the oxidation of primary alcohols or by the partial oxidation of hydrocarbons. The given compound is formaldehyde HCHO.

Find more on aldehydes:

https://brainly.com/question/30902678

#SPJ7

Answer:

1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s¹4f¹⁴5d¹⁰

Explanation:

Answer:

1.3 M

Explanation:

1 mole= Concentration * Volume

1 mole=C*0.75 L

C=1.3 M

Answer:

Option A.

Explanation:

1 mol of anything contains 6.02×10²³ particles.

We know that 1 mol of oxygen gas contains 2 moles of O.

1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.

By the way, the mass for 1 mol of O₂ may be:

Option A  →  16 g/mol . 2 mol

32 g

Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.

Another example can be:

1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.

Ocean acidification is the process of decreased pH levels of the oceans. The burning of fossil fuels and industrialization are man-made activities that lead to this process.

Ocean acidification is an increased concentration of acidic components of the oceans due to an increase in the carbon dioxide level of the oceans.

Human activities like cutting down a large number of trees, discharging from industrial outlets, and burning fossils like petrol, coal, diesel, etc. are leading to increased acidification of the oceans.

Therefore, natural causes like increased salinity, flood, and earthquake are the reasons for oceanic acidification.

Learn more about ocean acidification here:

https://brainly.com/question/7604502

Answer:

23, 51

Explanation:

Edmentum/plato

As per the balanced reaction, 2 moles of aluminum metal and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of copper metal.  10 g  of Al and 25g of copper nitrate gives 0.08 moles of aluminum nitrate and 0.13 moles of copper.

A limiting reactant is the reacting species which is not sufficient in amount to complete the reaction. Hence, the limiting reactant determines the yield of the reaction.

The given reaction is written as:

[tex]\rm 3Cu(NO_{3})_{2} + 2Al \rightarrow 2 Al(NO_{3})_{3} + 3Cu[/tex]

2 moles of Al and 3 moles of copper nitrate gives 2 moles of aluminum nitrate and 3 moles of Cu.

Molar mass of copper nitrate = 187.5 g/mol

atomic mass of aluminum = 27 g/mol

then, number of moles in 10 g of Al = 10 g/27 g/mol = 0.37 moles.

number of moles in 25 g of copper nitrate = 25 g/187.5 g/mol = 0.13 moles.

0.37 moles of Al needs 0.5 moles of copper nitrate to react with. Hence, copper nitrate is the limiting reactant.

3 moles of copper nitrate gives 2 moles of aluminum nitrate. Then 0.13 moles will give 2/3rd of 0.13 i e., 0.08 moles of aluminum nitrate. Similarly 0.13 moles copper nitrate gives 0.13 moles of copper metal.

Find more on limiting reactant:

https://brainly.com/question/14225536

#SPJ7

Your question is incomplete. But your complete question probably was:

10 g of aluminum metal reacts with 25 g of copper nitrate. Use the periodic table to determine the amount of copper and aluminum nitrate formed in the reaction.

In the reaction,

moles of Cu and

moles of Al(NO3)3 are formed.

Answer: I think it’s B

Answer: The given compounds are identified as being made of ionic, covalent, or metallic bonds:

Explanation:

A bond formed by transfer of electrons from one atom to another is called an ionic bond. An ionic bond is formed between a metal atom and a non-metal atom.

A bond formed by transfer of electrons from one atom to another is called a covalent bond. A covalent bond is formed between two or more non-metal atoms only.

Steel is actually an alloy of carbon and iron where there is less than 2% carbon, 1% manganese and small amounts of silicon, phosphorus, oxygen and sulphur are present.

When atoms of metals are held together then bond formed between these atoms is called metallic bond.

Hence, steel is made of metallic bond.

Chemical formula of propane is [tex]CH_{3}CH_{2}CH_{3}[/tex] as there are only non-metal atoms are present. So, sharing of electrons takes place in such atoms due to which covalent bonding will be there.

Hence, propane is made up of covalent bonds.  

Calcium chloride contains a metal and a non-metal atom. This means that electrons are being transferred from calcium atom to the chlorine atom. Hence, bond present in calcium chloride is ionic bond.

Water has chemical formula [tex]H_{2}O[/tex]. Since, non-metal atoms are present there so sharing of electrons takes place between hydrogen and oxygen atoms. Hence, covalent bond is present in water.

Thus, we can conclude that given compounds are identified as being made of ionic, covalent, or metallic bonds:

Steel: ✔ metallic

Propane: ✔ covalent

Calcium chloride: ✔ ionic

Water: ✔ covalent

Answer:

[tex]Kc\frac{(Ba3N2)(H2O)^6}{(Ba(OH)2)^3(NH3)^2}[/tex]

Explanation:

Because kc equals products/reactants hope this helps :)

Answer:

Acceleration decreases

Answer:

its b

Explanation:

Answer:

Explanation:

Hope this helps u!!

Answer:

20 grams.

Explanation:

5 mols of a compound has a mass of 100 grams

1 mol of the same compound has a mass of 100/5 = 20 grams

A.)

Standing on an elevated ledge would be more potential energy than standing on the ground. Same applies for anything else -- Including a chair!

The three functions of the stem:

Answer: it consists of two simple machines: a lever and a wheel and axle. Effort is applied to the lever by picking up the handles of the wheelbarrow.

Explanation:

Answer:

B

Explanation:

B)

Answer:

2.14 × 10²² atoms Si

General Formulas and Concepts:

Atomic Structure

Stoichiometry

Explanation:

Step 1: Define

Identify

[Given] 0.0356 mol Si

[Solve] atoms Si

Step 2: Identify Conversions

Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

2.14383 × 10²² atoms Si ≈ 2.14 × 10²² atoms Si

Answer:

Solution given:

H20=1+1+16=18grams

we have

1 mole of water =18grams

now

150grams of water=1/18*150=25/3 =8.33mole.

150 grams of water =8.33mole.

Note:

mole =given mass/actual mass of molecule/atom

1 mole of water is 18 grams.

Then,

150 grams of water,

→ 1/18 × 150

→ 25/3

→ 8.33333 . . .

Hence, 150 grams of water is 8.3 moles.

Answer:

D. They Increase the surface area of reactants.

Explanation:

And why I say the answer is  D, Because  Enzymes are soluble protein molecules that can speed up chemical reactions in cells

When Enzymes are proteins that speed up chemical reactions in the body so here it increase the surface area of reactants. hence, option d is correct.

It is the substance that is treated as the catalyst in the living organism.

In this, the biological process arises within the living organism are considered to be the chemical reactions.

Also, enzymes should be soluble protein molecules that speed up the chemical reaction in cell.

hence, the option d is correct.

learn more about an enzyme here: https://brainly.com/question/19346597

Answer:

34.78% Fe

39.66% Cu

5.48% S

20.07% O

Explanation:

Para resolver esta pregunta debemos hallar la masa de cada átomo en cada mineral. Así, podremos hallar el porcentaje de cada átomo:

Pirita (Fe: 55.845g/mol; S: 32.065g/mol; FeS2: 119.975g/mol)

Masa Fe:

20kg FeS2 * (1*55.845g/mol / 119.975g/mol) = 9.31kg Fe

Masa S:

20kg FeS2 * (2*32.065g/mol / 119.975g/mol) = 10.69kg S

Hemetita (Fe: 55.845g/mol; O: 16g/mol; Fe2O3: 159.688g/mol)

Masa Fe:

70kg Fe2O3 * (2*55.845g/mol / 159.688g/mol) = 48.96kg Fe

Masa O:

70kg Fe2O3 * (3*16g/mol / 159.688g/mol) = 21.04kg O

Calcopirita (Fe: 55.845g/mol; Cu: 63.546g/mol; CuFe2: 175.236 g/mol)

Masa Fe:

15kg CuFe2 * (2*55.845g/mol / 175.236 g/mol) = 9.56kg Fe

Masa Cu:

15kg CuFe2 * (1*63.546g/mol / 175.236 g/mol) = 5.44kg Cu

Tenorita (O: 16g/mol; Cu: 63.546g/mol; CuO: 79.545 g/mol)

Masa O:

90kg CuO * (1*16g/mol / 79.545 g/mol) = 18.10kg O

Masa Cu:

90kg CuO * (1*63.546g/mol / 79.545 g/mol) = 71.90kg Cu

Masa Total: 20kg + 70kg + 15kg + 90kg = 195kg

Porcentaje Hierro:

9.31kg Fe + 48.96kg Fe + 9.56kg Fe / 195kg * 100 =

34.78% Fe

Porcentaje Cobre:

5.44kg Cu + 71.90kg Cu / 195kg * 100 =

39.66% Cu

Porcentaje Azufre:

10.69kg S / 195kg * 100 =

5.48% S

Porcentaje Oxígeno:

21.04kg O + 18.10kg O/ 195kg * 100 =

20.07% O

meaning:An acid is a chemical substance, usually a liquid, which contains hydrogen and can react with other substances to form salts. Some acids burn or dissolve other substances that they come into contact with.

Answer:

Answer:

I got 1.14 mol So3 as the answer

hopefully if this could help