Answer:
for anniversary = 125
for wedding = 112.5
anniversary
Explanation:
Labour productivity = number of meals / total number of workers
for anniversary = 375 / 3 = 125
for wedding = 225 / 2 = 112.5
labour productivity is higher for the anniversary because one unit of labour produces more meals when compared to the wedding.
Discuss three major factors that contribute to an employee's decision to join a union. Discuss the five reasons that have contributed to the trend of decline in unionization g
Answer:
The answer is below
Explanation:
Three major factors that contribute to an employee's decision to join a union.
1. Greater Bargaining Power
As an individual employee, it can be difficult to negotiate for wage increase or better working condition generally. However, being a member Union, together the group can negotiate and demand for what they feel is right for their members. In a rare occasion, the threat of a strike by a Union is a great tool to bargain well with the employer.
2. Minimize Discrimination
As a Union, it is easier to demand for equality in terms of wage, working condition, promotion, leave etc. Unlike individual employee, who may be facing discrimination from his or her supervisor as to employee related issue. Union can ensure the management used the right policies that seek for equality among all its employees without favoritism or discrimination.
3. Sense of Security
An employee may join the Union on the basis that, Union can save them against abrupt dismissal or other types of work insecurities including accident, injury, illness etc.
Also, Union can help secure retirement benefits and ensure the management improve on the employees' welfare generally.
Five reasons that have contributed to the trend of decline in unionization
1. Irrelevance appearance of the Union:
Many workers believe that Union is not necessary because in the time of economic boom, getting wage increase and other working benefits can be gotten be individual employee and not necessarily through a Union, and at the same time, during economic downturn, unions often times don't have the capacity to protect their members from layoffs, wage and benefit reductions and tougher working conditions.
2. Poor Image of the Union:
Many employers and employees tend to view union with negativity, in the sense that, often times, their demands can be unreasonable, and are characterized by issue of labor racketeering, mob influence and embezzlement.
3. Unions are Seen as Political:
For some employees, they believe that Union tend to use their money or Union dues to support a political candidate. This in turn has made some employees who are neutral, not wanting to join the Union.
4. Reliance on goverment:
Many employees now believe that, government, not Union gives better form of security and voice to air their opinions. These includes pensions, healthcare, protection.
5. Global competition and deregulation in Unionized industries:
Since most of the companies or industries that have union has been deregulated, this has increased its competition, there by, making the need for union not really necessary, because with or without Union, one may still faces sack.
Ohno Company specializes in manufacturing a unique model of bicycle helmet. The model is well accepted by consumers, and the company has enough orders to keep the factory production at 10,000 helmets per month (80% of its full capacity). Ohno’s monthly manufacturing cost and other expense data are as follows.
Rent on factory equipment $11,600
Insurance on factory building 2,500
Raw materials (plastics, polystyrene, etc.) 79,700
Utility costs for factory 900
Supplies for general office 300
Wages for assembly line workers 63,700
Depreciation on office equipment 800
Miscellaneous materials (glue, thread, etc.) 1,200
Factory manager’s salary 6,400
Property taxes on factory building 500
Advertising for helmets 14,500
Sales commissions 10,600
Depreciation on factory building 1,600
Required:
Prepare an answer sheet with the following column headings:
Cost Item Direct Materials Direct Labor Manufacturing Overhead Period Costs
Answer:
Cost Item Direct Direct Manufacturing Period
materials labor overhead costs
Rent on factory $11,600
equipment
Insurance on $2,500
factory building
Raw materials $79,700
Utility costs $900
for factory
Supplies for $300
general office
Wages assembly $63,700
line workers
Depreciation on $800
office equipment
Miscellaneous $1,200
materials
Factory manager’s $6,400
salary
Property taxes on $500
factory building
Advertising for $14,500
helmets
Sales commissions $10,600
Depreciation on $1,600
factory building
TOTALS $79,700 $63,700 $24,700 $26,200
Luther Corporation
Consolidated Income Statement
Year ended December 31 (in $millions)
2006 2005
Total sales 610.1 578.8
Cost of sales (500.2) (355.3)
Gross profit 109.9 223.5
Selling, general, and
administrative expenses (40.5) (38.7)
Research and development (24.6) (21.8)
Depreciation and amortization (3.6) (3.9)
Operating income 41.2 159.1
Other income −− −−
Earnings before interest and taxes (EBIT) 41.2 159.1
Interest income (expense) (25.1) (15.3)
Pretax income 16.1 143.8
Taxes (5.5) (50.33)
Net income 10.6 93.47
Price per share $16 $15
Sharing outstanding (millions) 10.2 8.0
Stock options outstanding (millions) 0.3 0.2
Stockholders' Equity 126.6 63.6
Total Liabilities and Stockholders' Equity 533.1 386.7
Refer to the income statement above. Luther's operating margin for the year ending December 31, 2005 is closest to:_________.
A. 13.7413.74%
B. 21.9921.99%
C. 27.4927.49%
D. 32.9932.99%
Answer:
27.48%
Explanation:
Calculation for Luther's operating margin for the year ending December 31, 2005
Using this formula
Operating margin = Operating income / Sales
Let plug in the formula
Operating margin= 159.1/578.8
Operating margin=0.2748*100
Operating margin=27.48%
Therefore Luther's operating margin for the year ending December 31, 2005 is 27.48%
Steady Company's stock has a beta of . If the risk-free rate is and the market risk premium is , what is an estimate of Steady Company's cost of equity?
The question is incomplete as it misses the figures. The following is the complete question.
Steady Company's stock has a beta of 0.21. If the risk-free rate is 6.2% and the market risk premium is 6.9%, what is an estimate of Steady Company's cost of equity?
Answer:
The cost of equity is 0.07649 or 7.649%
Explanation:
The required rate of return or cost of equity capital is the rate required by the investors to invest in a stock based on the systematic risk of the stock as measure by the beta. The required rate of return or cost of equity can be calculated using the CAPM equation. The CAPM equation is,
r = rRF + Beta * rpM
Where,
rRf is the risk free raterpM is the risk premium on marketr = 0.062 + 0.21 * 0.069
r = 0.07649 or 7.649%
When the Federal Reserve buys long term MBS and Treasury securities from banks and announces its intention to keep buying these assets in large quantities for a long time the effect on commercial banks is to increase the value of fixed income securities that are not sold and at the same time to lower the interest spread between new loans originated and the cost of financing these loans. True False
Answer:
True
Explanation:
Since, Federal reserve purchased long term MBS in order to pay the less market interest rate and this will cause a rise in the amount of income i.e fixed securities. Also, due to less market interest rate, the financing cost is less and at the same time interest spread is narrower as it provides more liquidity
Therefore the given statement is true
Which of these conditions helped establish the foundation for a market revolution in the United States
Question Completion:
Choices: Rapid improvements in transportation and communication; the production of goods for a cash market; and the use of inventions and innovations to produce goods for a mass market.
Answer:
The condition that helped to establish the foundation for a market revolution in the United States is:
Rapid improvements in transportation and communication
Explanation:
Rapid improvements in transportation and communication spurred innovations. With innovations, capitalism was born. Innovations needed factories for mass production. In turn, according to American History, "factories and mass production increasingly displaced individual artisans and farmers," who survived at subsistent levels. Large farms grew and produced crops for distant markets, no longer only for family and local markets. Most of the crops were further processed, packaged, preserved, and shipped through cheap transportation systems like the Erie Canal, using steamboats. And the rest, they say, is history.
Harry and Sally formed the Evergreen partnership by contributing the following assets in exchange for a 50 percent capital and profits interest in the partnership.
Basis Fair Market Value Harry:
Cash $30,000 $30,000
Land $100,000 $120,000
Totals $130,000 $150,000
Sally:
Equipment used in business $200,000 $150,000
Totals $200,000 $150,000
a. How much gain or loss will Harry recognize on the contribution?
b. How much gain or loss will Sally recognize on the contribution?
c. Should Sally consider selling the property to the partnership rather than contributing it?
A. Yes
B. No
Answer:
a) $0
Generally, partners recognize gain on property contributed to a partnership only when the cash they are deemed to receive from debt relief exceeds their basis in the partnership prior to the deemed distribution. Harry did not have any debt relief.
b) $0.
Partners may never recognize loss when property is contributed to a partnership even when they are relieved of debt.
c) Sally should consider selling the property to the partnership rather than contributing it. By selling the property, she could recognize the $50,000 built-in loss on the equipment.
Long-Term Solvency Ratios Summary data from year-end financial statements of Palm Springs Company for 2017 follow.
Summary Income Statement Data
Sales $11,692,900
Cost of goods sold 5,135,000
Selling expenses 938,000
Administrative expenses 780,000
Interest expense 2,210,000
Income tax expense 905,000 9,968,000
Net income $1,724,900
Summary Balance Sheet Data
Cash $117,000
Total liabilities $900,000
Noncash assets 1,183,000
Stockholders' equity 400,000
Total assets $1,300,000
Total liabilities and equity $1,300,000
Round answers to two decimal places.
a. Compute the ratio of times-interest-earned.
b. Compute the debt-to-equity ratio.
Answer:
a. Compute the ratio of times-interest-earned.
times-interest-earned = EBIT / interest expense
EBIT = $4,839,900interest expense = $2,210,000times-interest-earned = $4,839,900 / $2,210,000 = 2.19
b. Compute the debt-to-equity ratio.
debt-to-equity ratio = total liabilities / total stockholders' equity
total liabilities = $900,000total stockholders' equity = $400,000debt-to-equity ratio = $900,000 / $400,000 = 2.25
Fed is open to changing bond policy Fed policymakers signaled for the first time that they could increase or decrease stimulation of the economy in the future, but not now. Source: Los Angeles Times, May 1, 2013 What are the ripple effects and time lags that the Fed must consider in deciding when to increase or decrease stimulation of the economy?
Answer:
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
Explanation:
When trying to stimulate the economy either by increasing or decreasing, policymakers have to take into consideration how it would effect interest rate, amount of money available in the economy, loans that would be acquired by banks and the behavior of interest rate.
Interest rate can be impacted quickly even though the period of time it would take for such action to have a reflection on what quantity of money is available in the economy. Then also a period of 2 years would be taken for this action to take effect on inflation.
Therefore
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
DPMO stands for:______
a) Defects Per Million Opportunity
b) Defectives Per Million Opportunity
c) Data Per Million Opportunity
d) all of the above
e) none of the above
Answer:
a) Defects Per Million Opportunity
Explanation:
DPMO is an acronym which stands for Defects Per Million Opportunity. Defects per Million Opportunities refers to a standard metric which represents the number of defects in a process per one million opportunities.
In order to calculate the DPMO, we divide the number of defects by the number of opportunities and then multiply by a million.
Additionally, when a quality characteristics or properties do not tally with a standard or specifications it is generally referred to as a defect.
Hence, in a six sigma approach to quality or level of performance, the defects per million opportunities (DPMO) is 3.4.
What was the ratio of per capita income in each of the following countries to that in the United States in the year 2010:
a. Ethiopia
b. Mexico
c. India
d. Japan
Answer:
For Countries (per capita) United States of America (per capita)
Ethiopia:
$380 $48,468
Mexico:
$9,271 $48,468
India:
$1,358 $48,468
Japan:
$44,508 $48,468
Explanation:
Ratio per Capita also known as Gross Domestic Product per Capita (GDP Capita) is the monetary measure of the market value of all the final goods and services produced in a specific time period within the country in view. It is useful for comparing national economies of different countries on the international market.
In decision making under ________, there are several possible outcomes for each alternative, and the decision maker knows the probability of occurrence of each outcome
Answer: risk
Explanation:
In the decision making under risk, there are several possible outcomes for each alternative, and the decision maker knows the probability of occurrence of each outcome.
Unlike in uncertainties whereby the decision maker won't know the probability of the occurrence of the outcomes, in risk, one is aware.
The central problem in product-oriented layout planning is?
Answer: The minimizing the imbalance in the workloads among workstations.
Explanation:
Workspace can inspire informal and productive encounters if it balances what three physical and social aspects.
You own two bonds. Both bonds pay annual interest, have 7 percent coupons, and currently have 7 percent yields to maturity. Bond A has 5 years to maturity and Bond B has 10 years to maturity. If the market rate of interest changes unexpectedly to 6 percent, the price of Bond A will change by _____ percent and the price of Bond B will change by _____ percent.
Answer:
the price of Bond A will change by 4.21% and the price of Bond B will change by 7.36%.
Explanation:
Bonds A and B
current bond price $1,000
interest rate 7%
Bond A matures in 5 years, annual payments
Bond B matures in 10 years, annual payments
if market interest decreases to 6%
Bond A:
$1,000 / (1 + 6%)⁵ = $747.26
$70 x 4.2124 (annuity factor, 6%, 5 periods) = $294.87
market price = $1,042.13
% change = 4.21%
Bond B:
$1,000 / (1 + 6%)¹⁰ = $558.39
$70 x 7.3601 (annuity factor, 6%, 10 periods) = $515.21
market price = $1,073.60
% change = 7.36%
An annuity provides for 30 annual payments. The first payment of 100 is made immediately and the remaining payments increase by 8 percent per annum. Interest is calculated at 13.4 percent per annum. Calculate the present value of this annuity.
Answer:
$1423.38
Explanation:
number of payments ( number of years )(n) = 30
first payment = $100
interest calculated at : 13.4 % = 0.134
increment rate : 8 percent = 0.08
we can calculate the present value using this Equation
= (p / (r-g)) * [1 - [(1+g)/(1+r)]^n ]
where :
p / (r-g) = 100 / (0.134 - 0.08 ) = $1852
[1 - ((1+g)/(1+r)]^n ) = (1 - ((1.08/1.134)^30 ) = 0.7686
hence the present value of this annuity = $1852 * 0.7686 = $1423.38
Note :
p ( first principal payment ) = $100
r ( calculated interest ) = 13.4% = 0.134
g ( increment interest ) = 8 % = 0.08
Do you believe the cash flows from investing activities should include not only the return of investment, but also the return on investment, that is the interest and dividend revenue?
Answer:
Yes. Cash flows from investing activities should also include return on investment.
Explanation:
Dividend and Interest revenue arise as a result of the Investments that were made by the company and as such constitutes cash flow from investing activities of a Company.
Cantor Corporation acquired a manufacturing facility on four acres of land for a lump-sum price of $9,000,000. The building included used but functional equipment. According to independent appraisals, the fair values were $4,500,000, $3,000,000, and $2,500,000 for the building, land, and equipment, respectively. The initial values of the building, land, and equipment would be:
Answer:
Initial value of building = $4,050,000
Initial value of land = $2,700,000
Initial value of equipment = $2,250,000
Explanation:
The fair value of an asset refers to a unbiased estimate of the likely market price of the asset.
The initial value of a fixed asset refers to the amount of money that spent to acquire or create the asset.
The initial value of each asset from a group of asset can be calculated using the following formula:
Initial value of an asset = Lump-sum price * (FVA / TFV) ............ (1)
Where, from the questio;
Lump-sum price = $9,000,000
FVA = Fair value of a particular asset. From the question, we have:
Building fair value = $4,500,000
Land fair value = $3,000,000
Land fair value = $2,500,000
TFV =Total fair value = Building fair value + Land fair value + Land fair value = $4,500,000 + $3,000,000 + $2,500,000 = $10,000,000
Substituting the values into equation (1), we can determine the initial value of each asset as follows:
Initial value of building = $9,000,000 * ($4,500,000 / $10,000,000) = $9,000,000 * 0.45 = $4,050,000
Initial value of land = $9,000,000 * ($3,000,000 / $10,000,000) = $9,000,000 * 0.30 = $2,700,000
Initial value of equipment = $9,000,000 * ($2,500,000 / $10,000,000) = $9,000,000 * 0.25 = $2,250,000
Corporation has found that % of its sales in any given month are credit sales, while the remainder are cash sales. Of the credit sales, Corporation has experienced the following collection pattern: 20% received in the month of the sale 40% received in the month after the sale 24% received two months after the sale 16% of the credit sales are never received November sales for last year were , while December sales were . Projected sales for the next three months are as follows: January sales. . . . . . . . . . . . . . . . $150,000 February sales. . . . . . . . . . . . . . . $130,000 March sales. . . . . . . . . . . . . . . . . $175,000 Requirement Prepare a cash collections budget for the first quarter, with a column for each month and for the quarter. (Round your answers to the nearest whole dollar.) Sweeney Corporation Cash Collections Budget For the Months of January through March January Cash sales Collections on credit sales: 20% Month of sale 40% Month after 24% Two months after Total cash collections Enter any number in the edit fields and then click Check An
Answer:
Some information is missing, specifically the % of credit sales. Similar questions use 80%, so I will use that %. Also, November sales were $85,000 and December sales were $115,000.
Cash collections budgetJanuary February March
Cash sales $30,000 $26,000 $35,000
Collection from Nov. sales $16,320
Collection from Dec. sales $36,800 $22,080
Collection from Jan. sales $24,000 $48,000 $28,800
Collection from Feb. sales $20,800 $41,600
Collection from March sales $28,000
Total cash collections $107,120 $116,880 $133,400
I have question with it can you help me please??
Answer:
Pick-up Later:
Set a pickup date
Process the transaction
Place all the items in the pickup area near the front of the store
Place a note on the items indicating they are sold.
Explanation:
The purpose of the above procedure is to enable the customer to take delivery of purchased goods hitch-free. The pick-up area needs to be covered against rain so that the mulch and topsoil do not degrade. It is assumed that the customer's contact information and payment have been secured before the arrangement for pick-up later.
who are the customers for textbooks? What do these customers want in terms of goods and services related to textbooks? From the publishers point of view, who are the key customer?
Answer:
the customers for textbooks are students and schools
TB MC Qu. 9-251 Turrubiates Corporation makes a product that ... Turrubiates Corporation makes a product that uses a material with the following standards: Standard quantity 6.7 liters per unit Standard price $ 1.20 per liter Standard cost $ 8.04 per unit The company budgeted for production of 2,500 units in April, but actual production was 2,600 units. The company used 18,000 liters of direct material to produce this output. The company purchased 18,800 liters of the direct material at $1.30 per liter. The direct materials purchases variance is computed when the materials are purchased. The materials quantity variance for April is:
Answer:
Direct material quantity variance= $696 unfavorable
Explanation:
Giving the following information:
Standard quantity 6.7 liters per unit
Standard price $ 1.20 per liter
Actual production was 2,600 units.
The company used 18,000 liters of direct material to produce this output.
To calculate the direct material quantity variance, we need to use the following formula:
Direct material quantity variance= (standard quantity - actual quantity)*standard price
Standard quantity= 6.7*2,600= 17,420
Direct material quantity variance= (17,420 - 18,000)*1.2
Direct material quantity variance= $696 unfavorable
It is important negotiators consider the shadow negotiation carefully before meeting with the other party so they:________
a. understand where the boundaries of the current negotiations are and should be.
b. are clear in their own minds about the scope of the negotiations.
c. understand how they would ideally like to work with the other party.
d. determine what ground the negotiation is going to cover and how the negotiators are going to work together.
e. understand that all the above are important to the shadow negotiations.
Answer:
b. are clear in their own minds about the scope of the negotiations.
Explanation:
Shadow negotiations refer to the unspoken assumptions that determine how those involved in a deal with each other, whose opinions get heard, whose interests hold sway. Therefore, this is important so the negotiators are clear in their own minds about the scope of the negotiations. Meaning that they go into the negotiation knowing who has more bargaining power and how far they can actually take the negotiation.
The amortization of bond premium on long-term debt should be presented in a statement of cash flows (using the indirect method for operating activities) as a(n)
Answer:
Operating Activity
Explanation:
The Indirect method, reconciles the Operating Profit to the Operating Cash Flow by adjusting the following items (1) Non Cash flow items previously added or deducted from Operating Profit and (2) Changes in Working Capital items.
Amortization of bond premium is an item of non-cash flow that was previously deducted from Operating Profit and needs to be added back.
Kenny, Inc., is looking at setting up a new manufacturing plant in South Park. The company bought some land six years ago for $7.9 million in anticipation of using it as a warehouse and distribution site, but the company has since decided to rent facilities elsewhere. The land would net $10.7 million if it were sold today. The company now wants to build its new manufacturing plant on this land; the plant will cost $21.9 million to build, and the site requires $940,000 worth of grading before it is suitable for construction.
Required:
What is the proper cash flow amount to use as the initial investment in fixed assets when evaluating this project?
Answer:
$33,540,000
Explanation:
initial investment:
opportunity cost of land (resale price of land) = $10,700,000building cost of the facilities = $21,900,000other expenses related to the site (grading) = $940,000total $33,540,000The purchase cost of the land is considered a sunk costs, since it is not relevant now. What is relevant is the price at which the land could be sold at the moment of starting the project.
A 25-year old single client has just started his own small business and is not covered by a retirement plan. He has $5,000 to invest and currently has a low level of income. He wishes to start saving for retirement. The BEST recommendation is a:
Answer:
Roth IRA
Explanation:
Based on this scenario, it can be said that the best recommendation would be a Roth IRA. This is an individual retirement account that non-deductible tax-free growth for retirement at age 59 1/2. As of 2018, the yearly limit for a Roth IRA account is $5,500 meaning that the client in this scenario would not have any problem investing the entire $5000 as soon as they open the account. And since he is in a low tax bracket he should not have any problem opening an Account.
Bryce Co. sales are $801,000, variable costs are $465,100, and operating income is $287,000. What is the contribution margin ratio
Answer:
Contribution margin ratio= 0.42
Explanation:
Giving the following information:
Bryce Co. sales are $801,000
Variable costs are $465,100
Operating income is $287,000.
To calculate the contribution margin ratio, we need to use the following formula:
contribution margin ratio= (sales - variable cost) / sales
contribution margin ratio= (801,000 - 465,100) / 801,000
contribution margin ratio= 0.42
Which one of these is the best description of a comparative market analysis? It shows what similar homes in the area have recently sold for It shows the list prices of similar homes in the area It’s a guide to the minimum acceptable offer It discloses issues with the home that are known to the seller
Answer:
It shows what similar homes in the area have recently sold for.
Explanation:
Answer:
The statement "It shows the same types of homes in the area that are presently sold" is considered to be the best description for the comparative market analysis.
Explanation:
A comparative market analysis is a tool that is used by the real estate agent in order to remove the value of the particular property via evaluation of the same types of homes that could be presently sold in a similar area.
For finding the best description regarding the comparative market analysis, we need to determine the following information:
It does not show the list prices of the same types of homes in the area.It does not guide for a minimum acceptable offer.Also, it does not disclose the issues for the income that are aware to the seller.Therefore we can conclude that the first statement is correct
Learn more about the comparative market analysis here: brainly.com/question/16715737
The advantages of using typedef do not include:a. Making programs more portable by allowing data types to be easily changed to meet system specifications.b. Making type names shorter.c. Making programs more readable.d. Increasing the efficiency of accessing struct member variables.
Answer:
d. Increasing the efficiency of accessing struct member variables.
Explanation:
In the programming language C and C++ there is a keyword i.e typedef that function is to provide a new name. It is to be used to develop an extra name for the other data type but it does not develop a new data type
Here the advantage of using typedef is as follows
1. It allows the data types for meeting the specifications of the system
2. The name would become shorter
3. Readable program
but it does not increase the efficiency
Hence, the last option is correct
Which of the following goals of a performance evaluation system is accomplished when the company's actual results are compared to industry standards?
A) Benchmarking
B) Motivating unit managers
C) Promoting goal congruence
D) Providing feedback
Answer:
A) Benchmarking
Explanation:
Benchmarking refers to a process in which the performance of the company could be measured with respect to the product, services, processes as compared with the industry performance
Here in the given situation, when an actual result is compared with the industry standards than we called as a benchmarking and the same is to be used for the evaluation of the performance system
Given the following information. Which of the statements below can you support with this information?
Maximum capacity (labor hours): 480 hours per week
Effective capacity ratio: 85 %
Actual time worked: 380 hours per week over the last two weeks
On-time delivery %: 75 percent of the jobs are being completed on time
a. More capacity needs to be added in the short term to improve performance in the system.
b. We need to look at variability in the rate at which jobs enter the shop.
c. Our workforce is not working hard enough.
d. Our workforce may be waiting on delayed arrivals of inputs needed to do the work.
Describe the reasons why you selected the specific option(s) that you did.
Answer:
d. Our workforce may be waiting on delayed arrivals of inputs needed to do the work.
Explanation:
There are two possible sources for 25% of the jobs not being delivered on time:
we have a problem with inputs required (materials or labor)we have a problem with the capacity of our facilityIf we followed Juran's Law, we can simply assume that the problem here has to do with our productive system (like 85% of production errors). Two clear problems are obvious:
only 380 hours worked out of total of 480 hours per week ⇒ why didn't anyone work during the remaining 100 hours? Is there a delay with the inputs or we don't have enough workers?only 85% of the facility's capacity is being used ⇒ why only 85% of the effective capacity ratio? If we are finishing jobs late, why do we have 15% of unused capacity?Obviously we cannot answer these questions just be reading two paragraphs, but that is what should be answered in order to solve the issues.
