Answer:
3.2371 g
Explanation:
Step 1: Given data
Initial mass of the bottle and the reagent: 25.3658 gFinal mass of the bottle and the reagent: 22.1287 gStep 2: Calculate the mass of the material was transferred to the flask
Since the bottle is unaltered, the mass of the material transferred to the flask is equal to the difference between the initial mass of the system and the final mass of the system.
m = 25.3658 g - 22.1287 g = 3.2371 g
What is erosion?
A) Weathered materials staying in one place
B) The movement of weathered materials by wind, water or ice
C) New materials on a land form
Answer:
B. The movement of weathered materials by wind, water or ice.
What volume in mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr?
Answer: A volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.
Explanation:
Given: Moles = 0.0130 mol
Molarity = 0.220 M
Molarity is the number of moles of solute present in liter of a solution.
[tex]Molarity = \frac{moles}{volume (in L)}[/tex]
Substitute the values into above formula as follows.
[tex]Molarity = \frac{moles}{volume (in L)}\\0.220 M = \frac{0.0130 mol}{Volume (in L)}\\Volume (in L) = 0.059 L[/tex]
As 1 L = 1000 mL
So, 0.059 L = 59 mL
Thus, we can conclude that a volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.
15. Triglycerides, waxes, and steroids are all ___ lipids because they contain only carbon, hydrogen, and oxygen
A. simple
B. methyl esters
C. complex
D. long-chain compounds
Answer:
A. simple
Explanation:
25.0 mL of nitrous acid (HNO2) is titrated with a 1.235 M solution of KOH. The equivalence point (stoichiometric point) is observed after 9.26 mL of base is added. What is the original concentration of the acid
Answer:
0.456 M
Explanation:
Step 1: Write the balanced neutralization equation
HNO₂ + KOH ⇒ KNO₂ + H₂O
Step 2: Calculate the reacting moles of KOH
9.26 mL of 1.235 M KOH react.
0.00926 L × 1.235 mol/L = 0.0114 mol
Step 3: Calculate the reacting moles of HNO₂
The molar ratio of HNO₂ to KOH is 1:1. The reacting moles of HNO₂ are 1/1 × 0.0114 mol = 0.0114 mol.
Step 4: Calculate the initial concentration of HNO₂
0.0114 moles of HNO₂ are in 25.0 mL of solution.
[HNO₂] = 0.0114 mol / 0.0250 L = 0.456 M
The sp of strontium carbonate, SrCO3, is 5.60×10−10 . Calculate the solubility of this compound in g/L.
Answer:
3.50 × 10⁻³ g/L
Explanation:
Step 1: Make an ICE chart for the solution of SrCO₃
"S" represents the molar solubility.
SrCO₃(s) ⇄ Sr²⁺(aq) + CO₃²⁻(aq)
I 0 0
C +S +S
E S S
The solubility product constant (Ksp) is:
Ksp = [Sr²⁺] [CO₃²⁻] = S²
S = √Ksp = √5.60 × 10⁻¹⁰ = 2.37 × 10⁻⁵ M
Step 2: Convert "S" to g/L
The molar mass of SrCO₃ is 147.63 g/mol.
2.37 × 10⁻⁵ mol/L × 147.63 g/mol = 3.50 × 10⁻³ g/L
Please help me with this ASAP i I will give you Brainliest
Perform the calculations and determine the absolute and percent relative uncertainty. Express each answer with the correct number of significant figures.
a. [9.8(±0.3)−2.31(±0.01)]8.5(±0.6)= __________
b. absolute uncertainty: __________
c. absolute uncertainty: _________
d. percent relative uncertainty: ___________
Answer:
Explanation:
Given the equation:
[tex]\implies \dfrac{[9.8(\pm0.3)-2.31(\pm 0.01)]}{8.5(\pm0.6)}[/tex]
The absolute uncertainty in a measurement is the term used to describe the degree of inaccuracy.
The first step is to determine the algebraic value on the numerator.
Algebraic value = 9.8 - 231
= 7.49
The absolute uncertainty = [tex]\sqrt{(abs. uncertainty_{v_1})^2+(abs. uncertainty_{v_2})^2}[/tex]
absolute uncertainty = [tex]\sqrt{(0.3)^3 + (0.01)^2}[/tex]
= [tex]\sqrt{0.09 + 0.0001}[/tex]
= 0.300167
∴
[9.8(±0.3) - 2.31(±0.01)] = 7.49(±0.300167)
The division process now is:
[tex]\implies \dfrac{[9.8(\pm0.3)-2.31(\pm 0.01)]}{8.5(\pm0.6)}= \dfrac{7.49 (\pm 0.300167)}{8.5 (\pm0.6)}[/tex]
Relative uncertainty = [tex]\dfrac{(\pm 0.300167)}{7.49}\times 100 \ , \ \dfrac{(\pm 0.6) }{8.5} \times 100[/tex]
Relative uncertainty = ±4.007565% , ±7.058824%
[tex]\text{Relative uncertainty} = \sqrt{(4.007565)^2+(7.058824)^2}[/tex]
[tex]\text{Relative uncertainty} = \sqrt{16.06057723+49.82699626}[/tex]
[tex]\text{Relative uncertainty} = \sqrt{65.88757349}[/tex]
[tex]\text{Relative uncertainty} = 8.117116[/tex]
≅ 8%
The algebraic value = [tex]\dfrac{7.49}{8.5}[/tex]
= 0.881176
≅ 0.88
The percentage of the relative uncertainty =[tex]\dfrac{\text{Absolute uncertainty }}{\text{calculated value} }\times 100[/tex]
By cross multiplying:
[tex]\text{Absolute uncertainty} (\%) = \dfrac{\text{relative uncertainty} \times \text{calculated value}}{100}[/tex]
[tex]\text{Absolute uncertainty} (\%) = \dfrac{8.117116\times 0.881176}{100}[/tex]
[tex]\text{Absolute uncertainty} (\%) = 0.0715260[/tex]
[tex]\mathbf{\text{Absolute uncertainty} (\%) \simeq 0.07}[/tex]
Finally:
[tex]\mathbf{\implies \dfrac{[9.8(\pm0.3)-2.31(\pm 0.01)]}{8.5(\pm0.6)}= 0.88 \pm (0.07) \pm 8\%}[/tex]
Explain how a scanning electron microscope (SEM) can be used in combination with an energy dispersive X-ray spectrometer (EDS) to perform elemental analysis on extremely small particles by placing the statements in the order that they occur.
Answer:
SEM provides detailed high resolution images of the sample by rastering a focussed electron beam across the surface and detecting secondary or backscattered electron signal. An Energy Dispersive X-Ray Analyzer (EDX or EDA) is also used to provide elemental identification and quantitative compositional information.
Energy Dispersive X-Ray Spectroscopy (EDS) is a chemical microanalysis technique used in conjunction with scanning electron microscopy (SEM).
The EDS technique detects x-rays emitted from the sample during bombardment by an electron beam to characterize the elemental composition of the analyzed volume.The SEM is an instrument that produces a largely magnified image by using electrons instead of light to form an image. A beam of electrons is produced at the top of the microscope by an electron gun. Once the beam hits the sample, electrons and X-rays are ejected from the sample. The electrons in the beam interact with the sample, producing various signals that can be used to obtain information about the surface topography and composition.Learn more:
brainly.com/question/15899795
Molecule contains carbon, hydrogen and sulfur atoms. When a sample of 0.535g of this compound is burnt in oxygen, 1.119 g of CO2and 0.229 gof H2O and 0.407g of SO2are obtained.
Calculate its empirical formula.
Answer:
The empirical formula is, C4H4S
Explanation:
Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles
Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g
Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles
Mass of hydrogen = 0.025 moles × 1 = 0.025 g
Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles
Mass of sulphur= 0.0064 moles ×32 = 0.2 g
Now we obtain the mole ratios by dividing through by the lowest ratio.
C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles
C4H4S
Convert speed of 581 miles an hour to units of feet per minute Also so the unit analysis by dragging components into the unit factor factor's
Explanation:
answer is in photo above
As: [Ar]4s23d104p3 [Ar]4s23d104p2 [Kr]4s24d104p3 [Kr]4s23d104p3
Answer:
[Ar]4s23d104p3
Explanation:
Answer:
[Ar]4s23d104p3 (Option A)
Explanation:
on edge2021 :D
What is a net ionic equation?
A. An equation showing only what is involved in the reaction
B. An equation that is balanced on both sides
C. An equation that shows all dissolved compounds as ions
O D. An equation that shows all substances as compounds
Answer:
I think A is the correct answer
What is the molar mass of Na2SO4?
O A. 142.04 g/mol
O B. 71.05 g/mol
O c. 238.22 g/mol
O D. 94.04 g/mol
Answer: A. 142.04 g/mol
Explanation:
How much energy does an X-ray with an 8 nm (8 x 10-9m) wavelength have?
A. 1.99 x 10-25 J
B. 3.33 x 1016 J
C. 2.48 x 10-17 j
D. 8.28 x 10-26 J
Answer:
it would be option C
Explanation:
Speed of light = 3×10^8m/s
Planck's constant = 6.626×10^-34 Js
Wavelength = 8 x 10^-9 m
Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9
Energy = [19.878×10^(8-34)] / 8 x 10^-9
Energy = 2.48475 × 10^(-26+9)
Energy = 2.48×10^-17 J
Use the following information to calculate the concentration, Ka and pka for an unknown monoprotic weak acid. (8 pts.) 20.00 mL
Volume of unknown weak acid used : 20.00 mL Total volume of 0.20 M NaOH required to reach the equivalence point: 18.50 mL Initial pH of the weak acid 2.87
Answer:
Concentration: 0.185M HX
Ka = 9.836x10⁻⁶
pKa = 5.01
Explanation:
A weak acid, HX, reacts with NaOH as follows:
HX + NaOH → NaX + H2O
Where 1 mole of HX reacts with 1 mole of NaOH
To solve this question we need to find the moles of NaOH at equivalence point (Were moles HX = Moles NaOH).
18.50mL = 0.01850L * (0.20mol / L) = 0.00370 moles NaOH = Moles HX
In 20.0mL = 0.0200L =
0.00370 moles HX / 0.0200L = 0.185M HX
The equilibrium of HX is:
HX(aq) ⇄ H⁺(aq) + X⁻(aq)
And Ka is defined as:
Ka = [H⁺] [X⁻] / [HX]
Where [H⁺] = [X⁻] because comes from the same equilibrium
As pH = 2.87, [H+] = 10^-pH = 1.349x10⁻³M
Replacing:
Ka = [H⁺] [H⁺] / [HX]
Ka = [1.349x10⁻³M]² / [0.185M]
Ka = 9.836x10⁻⁶
pKa = -log Ka
pKa = 5.01Fixed place that you use to help you to find position or measurements ?
Answer:
DO YOU PLAY COD OR FORTNIT3
Explanation:
Please write the right question. I’ll mark as brainliest if it’s right
Answer:
The correct answer is - A. alkane and E. Branched.
Explanation:
Alkane is saturated hydrocarbons that are combined with a single bond they can be either linear, branched, or cyclic hydrocarbons. A branched-chain or branched compound is a compound that has alkyl groups bonded to its central carbon chain.
Branched alkanes contain only carbon atoms and hydrogen atoms bonded with these carbon atoms in different branches, with carbons connected to other carbons by single bonds only, but the molecules contain branches.
In a physical change, the _____ does not change.
Physical changes occur when objects or substances undergo a change that does not change their chemical composition. This contrasts with the concept of chemical change in which the composition of a substance changes or one or more substances combine or break up to form new substances.
Over time, rocks break down into sediment by wind, water, ice, and/or gravity. This process is commonly referred to as
chemical change
Answer:
Explanation:
Chemical change
Air bags are activated when a severe impact causes a steel ball to compress a spring and electrically ignite a detonator cap. This causes sodium azide (NaN3) to decompose explosively according to the following reaction. 2 NaN3(s) --> 2 Na(s) 3 N2(g) What mass in grams of NaN3(s) must be reacted in order to inflate an air bag to 79.5 L at STP
Answer:
154 g
Explanation:
Step 1: Write the balanced decomposition equation
2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)
Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP
At STP, 1 mole of N₂ occupies 22.4 L.
79.5 L × 1 mol/22.4 L = 3.55 mol
Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂
The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.
Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃
The molar mass of NaN₃ is 65.01 g/mol.
2.37 mol × 65.01 g/mol = 154 g
identify the organ system pictured below and state two functions of this system in the body
Answer:
skeletal system
Explanation:
to create and fliter blood and provide frame-work to the human body and support
Calculate the number of representative particles of 0.0391 mol Neon gas.
i need help ASAP !
Answer:
2.35 × 10²² particles
Explanation:
To get the number of particles in a substance, we multiply the number of moles (n) of that substance by Avogadro's number (nA).
That is, we say;
number of atoms = n × 6.02 × 10²³
In this question, Neon gas is said to have 0.0391 moles. The number of atoms in that field.
number of particles = 0.0391 × 6.02 × 10²³
number of particles = 0.235 × 10²³
number of particles = 2.35 × 10²² particles
Read excerpt and answer 3 questions I’ll mark brainliest. Pls thank you
Answer:
please also share the excerpt
Explanation:
Thank you
Diameter of the Balloon
Before Heat
After Heat
6 centimeters 10 centimeters
Which conclusion is supported by the evidence?
A. Air expands when heated.
B. Air is warmer when heated.
C. The balloon will pop when heated.
D. The balloon contracts when heated.
Answer:
A. air expands when heated.
Explanation:
hope this helps!
A substance contains just copper and oxygen analysis shows that a 12.5g sample contains 11.1 of cooper and 1.4 of oxygen what is the formula of this red powder
Answer:
The formula of the compound is Cu₂O.
Explanation:
From the question given above, the following data were obtained:
Mass of compound = 12.5 g
Mass of copper (Cu) = 11.1 g
Mass of oxygen (O) = 1.4 g
Formula of compound =?
The formula of the compound can be obtained as follow:
Cu = 11.1 g
O = 1.4 g
Divide by their molar mass
Cu = 11.1 / 63.5 = 0.175
O = 1.4 / 16 = 0.0875
Divide by the smallest
Cu = 0.175 / 0.0875 = 2
O = 0.0875 / 0.0875 = 1
Therefore, the formula of the compound is Cu₂O.
A transition metal in the fourth period from the following list : Cu, O , Pr, Ag
Answer:
Cu
Explanation:
Groups 3 - 12 (or groups IIA - IIB) of the periodic table contain transition elements. Transaction elements start from period four (4) of the periodic table. The phrase alludes to the fact that the d sublevel is filling at a lower main energy level than the s sublevel that came before it.
The transition elements' arrangement is inverted from the fill order, with the 4 s filled prior to the actual 3 d begins. The transition elements are commonly referred to as transition metals since they are all metals. They are less reactive than the metals in Groups 1 and 2 and have normal metallic characteristics.
From the options given Cu is the only transition metal in the fourth period on the periodic table.
1 What direction do
molecules move in?
Answer:
The majority of the molecules move from higher to lower concentration, although there will be some that move from low to high. The overall (or net) movement is thus from high to low concentration.
hope this helps!<3
What is the mass (g) of 1.00 L water if the density is 1.000 g/mL.
Answer:
1000g
Explanation:
1 * 1000 = 1000
The drugs Prilosec and Nexium both contain the same active ingredient. Nexium contains a single enantiomer, but Prilosec is a racemic mixture. Which of the following is probably true regarding 20 mg doses of the two different drugs?
a. both drugs will be equally effective
b. both drugs can be prepared using the same synthetic procedure
c. Nexium will be more effective than Prilosec
d. Prilosec will be more effective than Nexium
Answer:
both drugs will be equally effective
Explanation:
A racemic mixture is a substance that contains a 50/50 mixture of the (+) and (-) enantiomers of an optically active compound.
It is important to note that even if a drug occurs as a racemic mixture, only the biologically active enantiomer will interact with the substrate on which the drug acts. The other enantiomer present is just irrelevant. Similarly, its presence does not affect the biological activity of the active enantiomer.
Hence, both Prilosec and Nexium are both equally effective.
What must happen for ice to melt at a given pressure?
A. The average kinetic energy of the water molecules must decrease.
B. Thermal energy must be transferred to the ice from its
surroundings.
C. The orderliness of the water molecules must decrease.
D. Thermal energy must be transferred from the ice to its
surroundings.
Answer:
D
Explanation:
thermal energy must be transferred from the ice to it's surroundings
Thermal energy is the heat and energy present in the system. The thermal energy must be dissipated from ice to the surroundings to melt and produce liquid. Thus, option D is correct.
What is thermal energy?Thermal energy is present in any substance in the form of energy and heat that depends on kinetic energy, orderliness, randomness, temperature, etc. It is passed from a substance to the surrounding at a lesser temperature.
The ice can melt into a liquid when it loses its thermal energy and heat to the surrounding with increased kinetic energy and releases the temperature to the area with a temperature less than the ice.
Therefore, the heat from ice will get dissipated to the outer environment to melt.
Learn more about thermal energy here:
https://brainly.com/question/11278589
#SPJ5
