A body weighing 50 N is placed on a wooden table. How much force is required to set it into motion? Coefficient of friction between the table and the body is 0.3.​

Answers

Answer 1

If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.

By Newton's second law,

• the net vertical force is 0, since the body doesn't move up or down, and in particular

F = n - mg = n - 50 N = 0   ==>   n = 50 N

where n is the magnitude of the normal force; and

• the net horizontal force is also 0, since static friction keeps the body from moving, with

F = F' - f = F' - µn = F' - 0.3 (50 N) = 0   ==>   F' = 15 N

where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.


Related Questions

If the force on a spring is 1 N and it stretched 0.5 m, what is the spring
constant?
A.4 N/m
B.0.2 N/m
C.2 N/m
D. 0.4 N/m

Answers

Force=F=1NStretched=x=0.5m

We know

[tex]\boxed{\sf Spring\:constant(K)=\dfrac{F}{x}}[/tex]

[tex]\\ \sf\longmapsto K=\dfrac{1}{0.5}[/tex]

[tex]\\ \sf\longmapsto K=2N/m[/tex]

2. a. in which principle does simple machine works? ​

Answers

Answer:

A simple machine uses a single applied force to do work against a single load force

Ignoring the friction losses. The work done on the load is equal to the work done with the applied energy. The machine can increase the amount of output power, with a corresponding drop in the distance transported by the load.

Which of the following is occurring while a satellite is in orbit around Earth? O It is continuously pulling away from Earth It is continuously falling toward the surface of Earth. It stays in a constant speed orbit where it was oriented from the start. It stays in the same orbit orientation traveling at variable speeds.​

Answers

AnswerIt is continuously falling towards the surface of the earth

Explanation:

since gravity from earth is the thing that keeps it constantly in orbit

Which of the following is required for photosynthesis to take place?

a.

sugar

b.

oxygen

c.

ATP

d.

water



Please select the best answer from the choices provided


A

B

C

D

please answer as quickly as possible

Answers

Answer:

D. water

Explanation:

sugar ( glucose ) and oxygen are bi-products

Answer:

(d) water

Explanation:

water is required for photosynthesis to take place .

sugar , oxygen , ATP are not required to take place in photosynthesis.

please answer me fast ​

Answers

Answer: i think c

Explanation:QA: “What is ordinary glass made of ?”

Glass is mostly silica, or silicon dioxide, present as quartz in many types of sand. Pure silica forms a highly transparent glass, but has a very high melting or softening temperature, around 1700°C. Even at such high temperatures it is highly viscous and difficult to work. Its use is largely confined to applications requiring high transparency to ultra-violet and infra-red radiation, stability at elevated temperatures or low thermal expansion coefficient.

“Ordinary glass” windows and drinking vessels are typically made from soda-lime glass, containing silica with around 25% sodium, calcium and other oxides, which together reduce the softening temperature to roughly 500–600°C

Which element has atoms with valence electrons in a higher energy level than those of calcium (Ca)?

(1 point)

oxygen (O)

lithium (Li)

bromine (Br)

cesium (Cs)

Answers

Lithium element contains one electron therefore valence electron will be one.  

The highest level of energy is due to valence electrons which are available to the atom.

The calcium has 2 valence electrons which has electrons with high energy.

These energy will be used by the electron during the chemical reaction, and they will either lose or gain valence electron.

Learn more at https://brainly.com/question/24373314

Answer:

calcium

Explanation:

2 electron

what is the direction of magnetic lines of force outside the magnet​

Answers

please mark me as brainiest p

Explanation:

Magnetic lines of force are closed curves. C) Outside the magnet their direction is from north pole to south pole and inside the magnet these are from south to north pole.

An object is thrown with velocity 7.1 m s-1 vertically upwards on the Moon. The
acceleration due to gravity on the Moon is 1.62 ms? What is the time taken for the object to return to its starting point?
A 3.5 s
B 4.4 s
C 6.5 s
D 8.8 s

Answers

Answer:D

Explanation:

Solar energy is a clean, renewable energy source. It is expensive to build a solar plant, but there is no fuel cost only maintenance. Why does solar energy not play a bigger role in energy production today?

Answers

Answer:

Energy production requires the setting up of a complete interconnected chain from generation of energy from the root source of the energy to the storage of the generated energy and the eventual utilization of the energy when required

Solar energy, indirectly, continues to be the main source of energy, however, the direct use of solar energy to power the systems we use in our everyday life, require the development of technologies, such as high efficiency solar cells, means of energy storage, and compatible efficient energy usage which are industrial areas that are seeing good progress but in which the current developed equipment are expensive to produce, and  due to their efficiency, are undergoing further research and development

Therefore, due to the continuous increasing improvement in solar technology which can observed, the use of the produced energy through solar is evolving, and therefore, will continue to play a continuously increasing but lower role compared to other sources of energy which have been developed to satisfactory level that can drive an industry, considering the financial investment involved

Explanation:

Current is the movement of positive charges called electrons.
A. True
B. False
help pls <33

Answers

Answer:

False -> negative charge

Answer:

false

Explanation: electrons are negative charges

protons are positive charges

Why does a ship float on water when it weighs about 100tones and why a stone of less than a kg sinks

Answers

Answer with Explanation:

Let me answer this in a simple way, since the density of stone is greater than that of water, the stone sinks as the weight of the stone is greater than the weight of water displaced by it. But the ship is designed in such a way that the relative density of the ship always becomes less than that of water. Therefore, the weight of the water displaced becomes equal to the total weight of the ship and thus it floats.

There are many other ways to explain this but this should give you the general idea.

To what height, h, would the pendulum bob rise after a single swing if it was being released from the height of 0.80 m

Answers

Answer:

0.80 m

Explanation:

Neglecting friction, the total mechanical energy of the pendulum is constant.

E = K + U where K = kinetic energy and U = potential energy.

At its release point of 0.80 m, the pendulum bob has a mechanical energy which is equal to its potential energy, since, its initial kinetic energy is zero. By the time the bob swings to the other end, it has a mechanical energy equal to it initial potential energy since total energy is conserved.

Neglecting friction, the pendulum bob would swing back to its original height of 0.80 m since the total mechanical energy is conserved and at its highest point, it is purely potential energy.

So, the height the pendulum bob swings to after release from a height of 0.80 m neglecting fiction is 0.80 m.

what is equal to 1 hector area

Answers

Answer:

Don't Forget To Follow, Brainliest, And Give Me Heart :)

A rocket travels vertically at a speed of 1200 km/h. The rocket is tracked through a telescope by an observer located 16km from the launching pad. Find the rate at which the angle between the telescope and the ground is increasing 3 min after lift-off. Round your answer to the nearest hundredth rad/hr

Answers

Answer:

w = 0.01 t⁻²   rad/h

Explanation:

Let's use trigonometry to find the elevation angle of the telescope, we assume that the rocket remains fixed in the telescope.

        tan θ = CO / CA

the adjacent leg is CA = 16 km = 16 10³ m

Let's use kinematics to find the height of the rocket

          v = y / t

          y = v t

this height is equal to the opposite leg

          CO = v t

     

we substitute

         tan θ = vt / 16

         tan θ = 1200/16 t

         tan θ = 75 t

         θ = tan⁻¹ ( 75 t )

speed is defined by

          w = dθ/dt

          w = [tex]\frac{1}{1 + (75 t)^2} \ 75[/tex]  

         

as time increases we can neglect the 1 of the denominator

          w = 1/75 t²

          w = 0.0133 t⁻²

Using three significant figures

           w = 0.01 t⁻²   rad/h

for this answer the time must be given in hours

what weight is recorded by a scale when it is placed inside a lift which is in free fall? Enplain.​

Answers

There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero I hope this is right

Answer:

Explanation:

There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero*. Hence, your weight, in a freely falling lift is zero

If a lever lifts a load four times the effort applied and effort distance is 5 times the load distance, calculate its efficiency​

Answers

Answer:

If effort distance was 4 times, efficiency would be 100%.

Since it takes 5 times for effort distance, efficiency drops to output/input

output is 1*F

input is (1/4*F)*5

so: F/1/5*F/4 = 4F/5F = .8 or 80%

The efficiency of the lever is 80%.

To calculate the efficiency of the lever, we can use the formula for mechanical advantage and efficiency.

Mechanical Advantage (MA) is the ratio of the load (L) to the effort (E) in a lever system:

MA = Load / Effort

Given that the load is four times the effort applied:

Load = 4 * Effort

Also, the effort distance (dEffort) is five times the load distance (dLoad):

dEffort = 5 * dLoad

Now, we can write the formula for efficiency (η) of a lever system:

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

The Ideal Mechanical Advantage (IMA) is the ratio of the effort distance to the load distance:

IMA = dEffort / dLoad

Substitute the given values into the IMA equation:

IMA = (5 * dLoad) / dLoad

IMA = 5

Now, we can calculate the Mechanical Advantage (MA) using the relationship between the load and effort:

MA = Load / Effort

MA = (4 * Effort) / Effort

MA = 4

Finally, we can calculate the efficiency (η):

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

η = (4 / 5) * 100%

η = 0.8 * 100%

η = 80%

The efficiency of the lever is 80%.

To know more about efficiency here

https://brainly.com/question/31458903

#SPJ2

what give negative acceleration ?

Answers

Answer:

But negative acceleration means that the rate of change of velocity is negative or velocity decreases. Example: (1) When we apply brakes in a moving car, then negative acceleration acts on it and the car stops. (2) When we throw a ball upwards, then also negative acceleration acts on it.

Explanation:

If it helps you mark me as a brainleast

MATHEMATICALLY A NEGATIVE ACCELERATION MEANS YOU WILL SUBTRACT FROM THE CURRENT VALUE OF THE VELOCITY.

A 2.0kg object is dropped from a height of 30m.
After it drops for 2.0 seconds, what is its kinetic
energy and what is its potential energy?
(Assume no air resistance.)

Answers

Answer:

1) The kinetic energy of the object after it drops for 2.0 seconds is approximately 384.9 Joules

2) The potential energy of the object after it drops for 2.0 seconds is approximately 204 J

Explanation:

1) The given mass of the object, m = 2.0 kg

The height from which the object is dropped, h = 30 m

The kinetic energy of the object after it drops for 2.0 seconds = Required

Kinetic energy, K.E. = (1/2)·m·v²

Where;

v = The velocity of the object

The kinematic equation for finding the velocity of the object is presented as follows;

v = u + g·t

Where;

u = The initial velocity of the object = 0

g = The acceleration due to gravity of the object ≈ 9.81 m/s²

t = The time of motion of the object = 2.0 seconds

∴ The velocity after 2 seconds, v ≈ 0 + 9.81 m/s² × 2 s = 19.62 m/s

The kinetic energy, K.E. after 2 seconds as the object drops is given as follows;

[tex]K.E._{(after \ two \ seconds)}[/tex] = (1/2) × 2.0 kg × (19.62 m/s)² = 384.9444 J ≈ 384.9 J

2) The total energy, M.E. of the object at the top, h = 30 m, u = 0, is given as follows;

The total mechanical energy, M.E. = P.E. + K.E.

M.E. = m·g·h + (1/2)·m·u²

∴ M.E. = 2.0 kg × 9.81 m/s² × 30 m + 0 = 588.6 J

M.E. = 588.6 J

Given that the total mechanical energy, M.E., is constant, we have;

At 2.0 seconds, M.E. = 588.6 J , K.E. ≈ 384.9 J, P.E. = M.E. - K.E.

∴ P.E. = 588.9 J - 384.9 J ≈ 204 J

The potential energy after it drops 2.0 seconds, P.E. ≈ 204 J

Which of the following is a vector quantity? i. Force ii. Velocity iii. Acceleration iv. All of these 5771​

Answers

All of these

Option ( iv ) is the correct answer.

Definition

A vector quantity the physical quantity that has both direction as well as magnitude.

good morning how ya'll doing today

Answers

Answer:

good

Explanation:

Answer:

fine

Explanation:

make me as brainliast

A scientist studies how air blowing on plants affects their growth. He uses fans to create different amounts of wind and measures the growth of the plants. What would make this experiment more repeatable?

Answers

Answer:D.Keeping track of the exact amount of wind on each plant

state and prove Newton's second law of motion ​

Answers

Answer:

HOPE IT HELP YOU A LOT :)

I prove it also .

Answer:

Newtons Second law of motion states that"The rate of change of momentum is directly proportional to the force applied"

during a journey, a car travels at 40 km in 2.5 hours, next 62 km in 3 hours, then took a break for 30 minutes, again travelled the last 120 km in 3.2 hours. calculate the average speed of the car during the journey.

Answers

45mph is the answer if you do the math right

convert 12 kg into gram​

Answers

Answer:

12000gram

Explanation:

1kg=1000gram

so, 12kg=12x1000

12kg=12000gram

Given amount=12kg

[tex]\boxed{\sf 1kg=1000g}[/tex]

[tex]\\ \sf\longmapsto 12kg=12(1000)[/tex]

[tex]\\ \sf\longmapsto 12kg=12000g[/tex]

For problems 2-3, a Ferrari accelerates from 0-60.0 miles per hour in 2.50 seconds.
2. What is its final speed, in m/s?
a 5.6 m/s
b. 13 m/s
c. 26.8 m/s
d. 1608 m/s
0-60.0 per near
2.50 seconds
3. What is its average acceleration?
a. 24.0 m/s
b. 10.7 m/s2
c. 38.6 m/s2
d. 13 m/s

Answers

Answer:

Explanation:

The first part of this question is simply asking us to convert the speed from miles per hour to meters per second:

[tex]60.0\frac{mi}{hr}*\frac{1hr}{3600sec}*\frac{1609.34m}{1mi}=26.8\frac{m}{s}[/tex] choice C.

The next part wants us to use the equation for acceleration and find the acceleration:

[tex]a=\frac{v-v_0}{t}[/tex] where v is final velocity, v0 is initial velocity, and t is time in seconds (which was one of the reasons we had to convert the initial velocity from 60.0 mph to m/s):

[tex]a=\frac{26.8-0}{2.5}[/tex] and

a = 10.7 m/s/s, choice B.

why do black holes have a large gravitational pull that even light cannot escape from

Answers

Answer:

Because matter has been squeezed into a tiny space.

Explanation:

According to NASA, this can happen when a star is dying.

A black hole has no more gravity than the same amount of matter in any other form.

But remember that the gravitational forces are stronger as you get closer to the center of the body. The mass of a black hole is packed into such a small size (theoretically zero !) that you can get very close to its center. THAT'S where its gravity is hugely strong.

An aluminium block of mass 1 kg is heated by an electric heater for 3 minutes and a temperature rise of 15 °C is recorded. If the electric heater is connected to a voltmeter which gives a reading of 30 V and an ammeter which gives a reading of 2.5 A, calculate the specific heat capacity of the aluminium.​

Answers

Answer:

the specific heat capa city of the aluminium is 900 joules per kilogram per °C.

Am I right please?

If a fan draws 220 watts on a 120- volt circuit what is the current being drawn?
22. amperes
O 5.2 amperes
O 1.8 ampmes
15. amperes

Answers

Explanation:

here's the answer to your question

Muốn đun sôi 200g nước từ 30 độ cần cung cấp nhiệt lượng bao nhiêu :

Answers

Answer:

cần cung cấp 70 độ vì nước sôi ở 100°C

Explanation:

3 An un calibrated mercury in glass thermometer immersed in melting ice. The length of the mercury thread is 25 mm when the thermometer immersed in steam from pure water boiling under a pressure of 1 atmosphere the length of the thread is 200 mm what is the temperature in degree centigrade when the length of the thread is 95mm.​

Answers

Answer:

25 mm = 0 deg C

200 mm = 100 deg C

200 - 25 = 175 = change in thread per 100 deg C

95 - 25 = 70 mm - change in thread from 0 deg C

70 / 175 * 100 = 40 deg C    final temperature at 95 mm

Other Questions
A manufacturer of potato chips would like to know whether its bag filling machine works correctly at the 421 gram setting. It is believed that the machine is underfilling the bags. A 43 bag sample had a mean of 414 grams. Assume the population standard deviation is known to be 19. Required:a. Is there sufficient evidence at the 0.1 level that the bags are underfilled?b. Find the P-value of the test statistic. A map is drawn to a scale of 1 cm to x m. A plot of land with an area of 28 hectares is represented by an area of 112 cm?. Find the value of x. (1 hectare = 10 000 m) What does the following quote mean, "Its aim was to put a stop to the economic downturn and help America recover from the effects of years of financial deprivation"?A. The New Deal was supposed to turn America into a communist nation and to prepare for war against Germany.B. The New Deal was supposed to give money to the poor Americans and take money from the rich American bankers.C. The New Deal was supposed to cause the economy to fail so that the price of gold would be worthless in the future.D. The New Deal was supposed to stop the failing economy and help America recover from years of economic troubles. (Q005) Identify the true statement. a. Magma is the term for very hot rock that is molten; when it cools and hardens, it's called lava. b. Igneous rocks form when pre-existing rocks undergo changes in response to heat and pressure. c. Hot, molten rock that cools and hardens produces metamorphic rocks. d. Sedimentary rocks form when pre-existing rock grains are cemented together. Find two consecutive even numbers whose sum is 758. Question 9(Multiple Choice Worth 5 points)(01.02 LC)Which group was most enraged by the Fugitive Slave Act? Democrats Slaveholders Abolitionists Secessionists When World War I began in August 1914, many people anticipated that the war would end by Christmas of that year. Which event extended the war into 1915 and beyond? Sometimes the most practical way to do an experiment is not to perform it in an animal, but to look at cell responses in culture. Cells from mice, humans, and other mammals have been used to establish cell culture lines that have been very important for research. You are studying a novel water-soluble mouse hormone. You know cell culture can be a practical model to reveal protein function, so you apply the hormone to yeast cells, but nothing happens. What is a likely explanation for why nothing happened in your experiment Water pollution is an environmental factor due to rapid population growth.(True or False)? Mixture Problem A solution contains 15 milliliters of HCIand 42 milliliters of water. If another solution is to havethe same concentration of HCl in water but is to contain140 milliliters of water, how much HCI must it contain? I need help guys thanks so much A, 3-2x=3(x+4)-x-1B, 5x(x-1)-4(x-1)=0 Which one of the following physical quantities has its S.I. unit m/s? (i) Acceleration (ii) Velocity (iii) Force (iv) Density If you dive underwater, you notice an uncomfortable pressure on your eardrums due to the increased pressure. The human eardrum has an area of about 70 mm217 * 10-5 m22, and it can sustain a force of about 7 N without rupturing. If your body had no means of balancing the extra pressure (which, in reality, it does), what would be the maximum depth you could dive without rupturing your eardrum "I saw the dying, the living, and the dead, lying indiscriminately upon the same floor, without anything between them and the cold earth, save a few miserable rags upon them." Elizabeth is sketching a copy of the flag shown. The dimensions of the drawing are one-third those of the actual flag. If the area of the drawing is40 square inches, what is the actual area of theflag? 5 in. 8 in. An object with a mass of 12.59 grams was immersed in water in a graduated cylinder. The volume of the water before was 56.7 mL. After the object was placed in the water, the volume read 63.0 mL. If density = mass/volume, calculate the density of the object to the correct sig figs. The equation y = mx + b goes through the points (6,-2) and (-6,-8).What is the value of m?What is the value of b? A tightrope walker is walking between two buildings holding a pole with length L=14.0 m, and mass mp=17.5 kg. The daredevil grips the pole with each hand a distance d=0.595 m from the center of the pole. A bird of mass mb=560 g lands on the very end of the lefthand side of the pole. Assuming the daredevil applies upward forces with the left and right hands in a direction perpendicular to the pole, what magnitude of force Fleft and Fright must the left and right hand exert to counteract the torque of the bird? what is one of mr pignati best lines