Answer:
80 N.
Explanation:
The following data were obtained from the question:
Mass (m) = 20 Kg
Initial velocity (u) = 5 m/s
Final velocity (v) = 17 m/s
Time (t) = 3 secs
Force (F) =.?
Next, we shall determine the acceleration of the body.
Acceleration is simply defined as the rate of change of velocity with time. Mathematically, it is expressed as:
Acceleration = change of velocity /time
Acceleration (a) = (final velocity (v) – initial velocity (u)) / time (t)
a = (v – u) /t
With the above formula, we can obtain the acceleration of the body as follow:
Initial velocity (u) = 5 m/s
Final velocity (v) = 17 m/s
Time (t) = 3 secs
Acceleration (a) =?
a = (v – u) /t
a = (17 – 5) /3
a = 12/3
a = 4 m/s²
Finally, we shall determine the force applied to the body as follow:
Force (F) = mass (m) x acceleration (a)
F = ma
Mass (m) = 20 Kg
Acceleration (a) = 4 m/s²
Force (F) =.?
F = ma
F = 20 x 4
F = 80 M.
Therefore, the force applied on the body is 80 N.
The wavelength of a radio wave varies inversely as its frequency. A wave with a frequency of 1800 kilohertz has a length of 200 meters. What is the length of a wave with a frequency of 360 kilohertz?
Answer:
1000meters
Explanation:
Let the wavelength of the radio wave be W and it's frequency be f. If the wavelength of a radio wave varies inversely as its frequency, then W∝1/f
W = k/f where k is the constant of proportionality.
k = Wf
If a wave with a frequency of 1800 kilohertz has a length of 200 meters, then k = 1800×200
k = 360,000kHzm
To get the length of a wave with a frequency of 360 kilohertz, we will substitute the value of k and f = 360kHz into the initial formula i.e
W = k/f
W = 360,000/360
W = 1000meters
Hence the length of a wave with a frequency of 360 kilohertz is 1000meters
'When we see something that exists in real life, there are many different ways to display imagery and importance using art. What the artist _____________ depends on what he/she wants to communicate.'
Answer:
Emphasizes
Explanation:
The expression of an art is intelligible to those that understand it, as such to make an impression an artist has to emphasize the point they want to communicate
An art is an expression of the personal experiences of the artist or a reaction to events or to reveal the realities as seen by the artist such as global warming and the environment, so as to get the attention of people with the goal to change them, such that a good art changes the most people, hence the need for emphasis.
Answer:
A - emphasizes
A physics student stands on a cliff overlooking a lake and decides to throw a softball to her friends in the water below. She throws the softball with a velocity of 23.5 m/s at an angle of 39.5∘ above the horizontal. When the softball leaves her hand, it is 11.5 m above the water. How far does the softball travel horizontally before it hits the water? Neglect any effects of air resistance when calculating the answer.
Answer:
66.86m
Explanation:
Velocity of ball thrown, u = 23.5 m/s
Initial height of the ball above the water, H = 11.5 m
Angle of projection, θ = 39.5°
Vertical components of veloclty = usinθ
Horizontal components of veloclty = ucosθ
The soft ball hits the water after time 't'
Considering the second equation of motion
S = ut + 1/2at^2........ 1
But since the ball went through motion under gravity ( free fall ) rather than linear motion, then equation 1 can be rewritten as:
H = ut +/- 1/2gt^2
H = - 11.5m
U = usinθ
θ = 39.5°
a = -g = -9.8m/s^2
- 11.5m = 23.5(sin39.5°)t + 1/2(-9.8)t^2
-11.5m = 23.5(0.6360)t - 4.9t^2
-11.5m = 14.946t - 4.9t^2
4.9t^2 -14.946t-11.5m = 0
Since the ball drifted horizontally
D = (Ucosθ)t
Where θ = 39.5°
U = 23.5m/s t=
Alternatively,
horizontal component of the velocity is 23.5 cos 39.5º = 18.1331 m/s
now how long does it take the ball to raise to a peak and fall to the water.
vertical component of velocity = 23.5 sin 39.5º = 14.947m/s
time to reach peak t = v/g = 11.947/9.8 = 1.5252 sec
peak reached above cliff top is
h = ½gt² = ½(9.8)(1.5252)²
= ½×22.797
= 11.3985m
now the ball has to fall 11.3985+ 11.5 = 22.8985m
time to fall from that height is
t = √(2h/g) = √(2• 22.8986/9.8) = 2.1617 sec
add up the two times to get time it is in the air, 2.1617 + 1.5252 = 3.6869
now haw far does the ball travel horizontally in that time
d = vt = 18.1331 ×3.6869= 66.856m
= 66.86m
what are some factors that affect the frequency of sound
Answer:
1. direction of propagation of sound
2.medium through which sound trsnsmitted
How does the athlete, in your sport, control their speed?
Answer:
What separates athletes from their competitors is the word itself, separation — gaining it on the offensive side, or taking it away on the defensive side (There are exceptions of course, one being the contest of offensive linemen and defensive linemen in football where the inverse is true). Speed, strength, and power are great ways to create separation in sports. However, speed, strength, and power all have genetic ceilings
How use of SI units in daily life is important .
Answer:
SI units are the physical units of measurement. SI units include kilogram, meter, second, ampere, kelvin, candela, and mole etcetera.
SI units are very important for daily life while measuring daily life commodities, such as:
Use of kilograms and grams while buying or selling sugar or other food items.Use of kilometers and meters while covering distances.Use of meters or inch by carpenters while estimating the lengths for furniture.Use of hours, seconds and minutes to measure time duration.Use of ampere and volt to measure current and voltage respectively by electricians.Without SI units, it would be difficult to meausre the amount of object required or any other measurement object.
write down the reading shown on the instrument above in units of the instrument
Answer:
The reading of the vernier calliper is 3.93 mm
Explanation:
The given instrument is a micrometer screw gauge that has a main scale reading and a vernier scale reading
The the question, we have;
The individual divisions of the main scale = 0.5 mm
The reading on the main scale = 3.5 mm
The reading on the vernier scale = 43
The accuracy of the vernier caliper = 0.01
Reading on the vernier scale multiplied by the accuracy of the vernier caliper = 43 × 0.01 = 0.43 mm
The reading of the micrometer screw gauge = The reading on the main scale + Reading on the vernier scale multiplied by the accuracy of the vernier caliper
Therefore, the reading of the micrometer screw gauge = 3.5 + 0.43= 3.93 mm
The reading of the vernier calliper = 3.93 mm.
A central air-conditioner uses 3500W of electricity. If electricity costs $0.087/kW*h. calculate how much it would cost to operate the air-conditioner 24 hours a day for 4 months (120 days).
Answer:
$876.96
Explanation:
The energy used is:
3500 W × (24 hr/day) × (120 day) × (1 kW / 1000 W) = 10,080 kWh.
So the cost is:
10,080 kWh × ($0.087 / kWh) = $876.96
1-A boy rolls a toy car across a floor with a velocity of 3.21 m/s. How long does it take the car to travel a distance of 4.50 m?
A-0.71s
B-1.40s
C-2.9s
D-14s
2-A girl heads out for a jog and runs at 2.95 m/s, due North, for 3600 s. How far did she run?
A-0.194 x 10^-4
B-1220m
C-5240
D-10620
3-A car is traveling South on I-85. It travels between two exits that are 5.40 km apart in 4.85 minutes. What is the average velocity of the car in m/s?
A-8.42m/s
B-12.8m/s
C-14.9m/s
D-18.6m/s
4-An airplane takes 1.30 hours to travel to an airport north of Atlanta. If the average speed of the plane is 134 m/s, what is the plane's displacement as measured from Atlanta?
A-129,324m=129,000m rounded
B-356,247m=356,000m rounded
C-498,782m=499,000m rounded
D-627,120m=627,000m rounded
5-How long does it take a sailboat traveling 18.0 m/s to go 15.7 km west?
A-15,000s
B-872s
C-594s
D-326s
The length and breadth of rectangular sheet of metal are 4.234m, 1.005,
and 2.01cm respectively.
Give the area and volume of sheet to correct significant figures..
Answer:
The area of the sheet of metal = 4.255 m²
The volume of the sheet of metal = 0.08553 m³
Explanation:
The area of a rectangle is given by the following relation;
Area, A = Length × Breadth
Therefore, the area of the rectangular sheet of metal, A[tex]_m[/tex], is given as follows;
A[tex]_m[/tex] = 4.234 m × 1.005 m = 4.255 m²
The area of the sheet of metal = 4.255 m²
The volume of the metal sheet id given by the relation, volume V[tex]_m[/tex]= area × Thickness
The thickness of the sheet of metal = 2.01 cm = 0.0201 m
Therefore,
V[tex]_m[/tex] = 4.255 m × 0.0201 m = 0.08553 m³
The volume of the sheet of metal = 0.08553 m³.
Answer:
Are yarr mei bhi Indian hu.....
Explanation:
Tumse milkar accha laga
A car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway. Which of the following statements most accurately describes the motion of the car? Choose 1 answer:(Choice A) A The average velocity is 40 miles per hour. (Choice B) B The total displacement of the trip is 300 miles. (Choice C) C The average speed is 37.5 miles per hour. (Choice D) D The car travels at 50 mph for the first half and 30 mph for the second half.
Answer: D
Explanation:
Given that a car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway.
From point A to B
The speed = distance / time
Where
Distance = 150 mile
Time = 3 hours
Substitute the values into the formula
Speed = 150/3 = 50 mile/ hours
From Point B to Point A
Distance = 150 miles
Time = 5 hours
Where speed = distance/ time
substitute all the parameters into the formula
Speed = 150/5 = 30 mph
Therefore, The car travels at 50 mph for the first half and 30 mph for the second half.
The correct answer is option D
explain why the density of a gas is much less than that of a solid or liquid
Answer:
A gas usually has much lower density than a solid or liquid. ... The molecules or atoms in a gas are much further apart than in a solid or a liquid. Gas molecules or atoms are usually flying around at very high speeds, occasionally bouncing off each other or the walls of the container the gas is in.
Question is on the picture. Answers: A. 0.1 J/g*C B. 0.2 J/g*C C. 0.4 J/g*C D. 4 J/g*C
Answer:
B. 0.2 J/g/°C
Explanation:
The solid phase is the first segment (from 0°C to 50°C).
q = mCΔT
200 J = (20 g) C (50°C)
C = 0.2 J/g/°C
Students create a standing wave
with three loops on a slinky 3.75 m
long. They time 20 oscillations in
6.73 s. What is the wavelength of
the standing wave?
(Unit = m)
Explanation:
Given that,
Number of loops are 3
Length of slinky is 3.75 m
They time 20 oscillations in 6.73 s.
We need to find the wavelength of the standing wave.
For 3 loops, [tex]L=\dfrac{3\lambda}{2}[/tex]
Here, [tex]\lambda[/tex] is the wavelength of the standing wave
So,
[tex]\lambda=\dfrac{2L}{3}\\\\\lambda=\dfrac{2\times 3.75}{3}\\\\\lambda=2.5\ m[/tex]
So, the wavelength of the standing wave is 2.5 m.
Each corner of a right-angled triangle is occupied by identical point charges "A", "B", and "C" respectively. Draw a sketch of this arrangement. "A" exerts force F on "B". An equal force F is exerted by "C" on "B" (/_ ABC= 90 degrees). Determine an expression for the net force on "B".
Answer:
Fnet = F√2
Fnet = kq²/r² √2
Explanation:
A exerts a force F on B, and C exerts an equal force F on B perpendicular to that. The net force can be found with Pythagorean theorem:
Fnet = √(F² + F²)
Fnet = F√2
The force between two charges particles is:
F = k q₁ q₂ / r²
where
k is Coulomb's constant, q₁ and q₂ are the charges, and r is the distance between the charges.
If we say the charge of each particle is q, then:
F = kq²/r²
Substituting:
Fnet = kq²/r² √2
At summer camp, the swimming course runs the length (L) of a small lake. To determine the length of the course, the camp counselors measure the two "dry" legs of a right triangle. What is the length in meters of the swimming course in the figure below?
Answer:
47.17 m
Explanation:
From the diagram of the question attached, The length of the legs are 25 m and 40 m . This legs form a right angle triangle with the length of the swimming course (L).
Pythagoras theorem states that for a right angle triangle with hypotenuse a and legs b and c, then:
a² = b² + c²
In the triangle, the length of the swimming course (L) is the hypotenuse and the two legs are 25 m and 40 m. Using Pythagoras:
L² = 25² + 40²
L² = 625 + 1600
L² = 2225
L = √2225
L = 47.17 m
which of the following are possible units for a spring constant? A. N/nm B. nm/N C. nm/J D. J/nm
Answer:
Since N/m is the unit of spring constant N/nm would be the possible unit for a spring constant.
A. N/nm is the possible unit for a spring constant.
Is spring constant in N m?The units at the spring regular are Newton/meter (N/m). The poor signal within the above equation is an indication that the direction that the spring stretches is opposite the path of the pressure that the spring exerts.
Because the force is measured in Newtons and the spring consistent is multiplied with the aid of the gap in meters, the spring constant need to have devices that get rid of meters, ensuing most effective force. The most effective devices that work for the spring regular are for that reason, Newtons in step with the meter.
Learn more about spring constant here: https://brainly.com/question/1968517
#SPJ2
ASAP TWENTY POINTS What type of image is formed by a mirror if m = -0.4?
Answer:
OPTION (C)
Explanation:
m(magnification) = -0.4 means a real, inverted and diminished image is formed in front of the mirror.
an object weights 0.250 kgf in air 0.150 in water and 0.125 in an oil.find out the density of the object and the oil
Answer:
1) The density of the object = 2500 kg/m³
2) The density of the oil = 1250 kg/m³
Explanation:
1) The information relating to the question are;
The mass of the object in air = 0.250 kgf
The mass of the object in water = 0.150 kgf
The mass of the object in the oil = 0.125 kgf
By Archimedes's principle, we have;
The upthrust on the object in water = Mass in air - mass in water = The weight of the water displaced
The upthrust on the object in water = 0.250 - 0.150 = 0.1 kgf
∴ The weight of the water displaced = 0.1 kgf
Given that the object is completely immersed in the water, we have;
The volume of the water displaced = The volume of the object
The volume of 0.1 kg of water water displaced = Mass of the water/(Density of water)
The volume of 0.1 kg of water = 0.1/1000 = 0.0001 m³
The density of the object = (Mass in air)/ volume = 0.250/0.0001 = 2500 kg/m³
The density of the object = 2500 kg/m³
2) Whereby the mass of the object in the oil = 0.125 kgf
The upthrust of the oil = The weight of the oil displaced
The upthrust of the oil on the object = Mass of the object in air - mass of the object in the oil
The upthrust of the oil on the object = 0.250 - 0.125 = 0.125 kgf
The weight of the oil displaced = The upthrust of the oil
Given that the volume of the oil displaced = The volume of the oil, we have;
The volume of the oil displaced = 0.0001 m³
The mass of the 0.0001 m³ = 0.125 kg
Therefore the density of the oil = 0.125/0.0001 = 1250 kg/m³.
The density of the oil = 1250 kg/m³.
a rock with mass of 5kg is carried up a small hill 10 meters high. how much work had to be done in carrying the rock up hill
Answer:
490Nm
Explanation:
Given the following :
Mass of rock = 5kg
Height or distance = 10 meters
A rock with mass of 5kg is carried up a small hill 10 meters high. how much work had to be done in carrying the rock up hill?
Workdone is product of force and distance.
Workdone = force * distance
Recall :
Force = mass * acceleration due to gravity (g)
g = 9.8m/s^2
Force = 5 * 9.8 = 49 N
Therefore,
Workdone = 49 × 10 = 490Nm
within a conventional light bulb, which of the following would not be considered a state of matter
a. the glass shell of the bulb
b. the metal base of the bulb
c. the air inside the bulb
d. the light from the bulb
Answer:
D
Explanation:
because light has no space nor mass
A wire of length 5mm and Diameter 2m extends by 0.25 when a force of 50N was use. calculate the
a. Stress of the wire.
b. Strain of the wire
Answer and Explanation:
Data provided in the question
Force = 50N
Length = 5mm
diameter = 2.0m = [tex]2\times 10^{-3}[/tex]
Extended by = 0.25mm = [tex]0.25\times 10^{-3}[/tex]
Based on the above information, the calculation is as follows
a. The Stress of the wire is
[tex]= \frac{force\ applied}{area\ of \ circle}[/tex]
here area of circle = perpendicular to the are i.e cross-sectional i.e
= [tex]\frac{\pi d^{2}}{4}[/tex]
= [tex]\frac{\pi(2\times 10^{-3})^2}{4}[/tex]
Now place these above values to the above formula
[tex]= \frac{4\times 50}{\pi\times 4 \times 10^{-6}} \\\\ = \frac{50}{\pi}[/tex]
= 15.92 MPa
As 1Pa = 1 by N m^2
So,
MPa = 10^6 N m^2
b. Now the strain of the wire is
[tex]= \frac{Change\ in\ length}{initial\ length} \\\\ = \frac{0.25\times 10^{-3}}{5}[/tex]
= [tex]5 \times 10^{-5}[/tex]
A rock is thrown at a window that is located 16.0 m above the ground. The rock is thrown from the ground at an angle of 40.0° above horizontal with an initial speed of 30.0 m/s and experiences no appreciable air resistance. If the rock strikes the window on its upward trajectory, from what horizontal distance from the window was it released?
Answer:
x = 27.3 m
Explanation:
This is a projectile launching exercise, let's start by looking for the time it takes for the rock to reach the height of the window.
Let's use trigonometry to find the velocities of the rock
sin 40 = [tex]v_{oy}[/tex] / v
cos 40 = v₀ₓ / v
v_{oy}= v sin 40
v₀ₓ = v cos 40
v_{oy} = 30 sin 40 = 19.28 m / s
v₀ₓ = v cos 40
v₀ₓ = 30 cos 40 = 22.98 m / s
we look for the time
[tex]v_{y}^2[/tex] = v_{oy}^2 - 2 g y
v_{y}^2 = 19.28 2 - 2 9.8 16 = 371.71 - 313.6 = 58.118
v_{y} = 7.623 m / s
we calculate the time
v_{y} = v_{oy} - gt
t = (v_{oy} - v_{y}) / g
t = (19.28 -7.623) / 9.8
t = 1,189 s
since the time is the same for both movements let's use this time to find the horizontal distance
x = v₀ₓ t
x = 22.98 1,189
x = 27.3 m
What areas of the work force can science be applied to?
Select all that apply
government regulatlon
healthcare
a telemarketing
environmental engineering
banking
Answer:
All of the work of lifeExplanation:
In all works of life science can be applied, in-fact science has already been applied already, even in the humanities, social sciences and art related studies sciences is being applied,
Furthermore, the application of science and technology knows no boundaries, and as science is advancing day by day, expanding to new frontiers and breaking new limits so is it application to all works of life and relevance everyday.
numeria
problems
lifted
Joy
1
لوووو
G. Solue the
following
A load
800 Nis
effort
If
the load is
laced at
a distance
Lo cun from
achat will be the
effort distance ?
Solher load ( l = 8oon
Effort
(e) = 200N
the fularum,
Answer:
[tex] \boxed{40 \: cm}[/tex]Explanation:
Load ( L ) = 800 N
Effort ( E ) = 200 N
Load distance ( LD ) = 10 cm
Effort distance ( ED ) = ?
now, Let's find the effort distance:
[tex] \mathsf{L \times LD = E \times ED}[/tex]
Plug the values
[tex] \mathsf{800 \times 10 = 200 \times ED}[/tex]
Multiply the numbers
[tex] \mathsf{8000 = 200 \: ED}[/tex]
Swipe the sides of the equation
[tex] \mathsf{200 \: ED = 8000}[/tex]
Divide both sides of the equation by 200
[tex] \mathsf{ \frac{200 \: ED }{200} = \frac{8000}{200} }[/tex]
Calculate
[tex] \mathsf{ED \: = \: 40 \: cm}[/tex]
Hope I helped!
Best regards!
when you turn on music on your phone, what energy transformation takes place ?
Answer: A Battery contains chemical energy which transfers electrical energy into the phone, powering it and also transferring Light energy, Sound energy and Heat energy.
Explanation:
What is the approximate pressure of a storage cylinder of recovered r-410a that does not contain any non-condensable impurities and is stored in a room where the temperature is 80°f?
Answer:
173psig
Explanation:
The storage cylinder of recovered R-410A is mixture of difluoromethane and pentafluoroethane which is used as a refrigerant in air conditioning application. The refrigeration sector has low temperatures for installation. The pressure of cylinder at 80 F will be 173 psig. The pure refrigerants have inside a container have saturation temperature which is equal to ambient temperature.
A containment canister of recovered r-410a has an estimated pressure of 173psig.
The retrieved R-410A preservation container is a blend of difluoromethane and pentafluoroethane, that is used as a compressor in air conditioning systems.
Assembly conditions in the freezer industry are extremely low. At 80 degrees Fahrenheit, the cylinder pressure will be 173 pounds per square inch.
The specific heat capacity of pure refrigeration systems within a cylinder is the same as the room temperature.
Learn more:
https://brainly.com/question/5793747?referrer=searchResults
What happens when a sound wave passes from oil into air? A. the sound wave slows down and bounces back B. the sound wave slows down and bends C. the sound wave speeds up and bounces back D. the sound wave speeds up and bends
Oil is optically denser than water. When sound/light goes from optically denser medium to optically rarer medium, their velocity increase and they moves away for normal.
Appropriate Answer:The sound wave speeds up and bends
[tex] \Large{ \underline{ \boxed{ \pink{ \bf{Option \: (D)}}}}}[/tex]
As, In optics we learnt that light undergoes refraction when travels from medium of different densities. Similarly, Sound also follows the law of refraction.
It is due to the change of speed of water in different mediums, This makes it speed up or down depending upon the medium and their densities.━━━━━━━━━━━━━━━━━━━━
Answer:
the sound wave slows down and bends
Explanation:
a p e x
A vertical cylinder with a heavy piston contains air at 300 K. The initial pressure is 2.0 x 105 Pa and the initial volume is 0.35 m3 . Take the molar mass of air as 28.9 g/mol and assume Cv= 5 2R. (A) Find the specific heat of air at constant volume in units of J kg·K . (5 pts) (B) Calculate the mass of air in the cylinder. (5 pts) (C) Suppose the piston is fixed. Find the energy input required to raise the temperature to 700 K. (5 pts). (D) Assume again the conditions of the initial state and assume the piston is free to move. Find the energy input to raise the temperature to 700 K. (10 pts)
Find answers and explanations in the attachments
Answer:
Explanation:
) (C) Suppose the piston is fixed. Find the energy input required to raise the temperature to 700 K.
A projectile has a range of 60 m and can reach a maximum height of 15 m. Calculate the angle at which projectile is fired? ( g = 10m/s2 )
Answer:
The angle the projectile was fired is [tex]45^o[/tex]
Explanation:
Recall the formulas for maximum height and ranges for a projectile fired with initial velocity "v" at an angle [tex]\theta[/tex]:
[tex]h = \frac{v^2\,sin^2(\theta)}{2\,g}\\R=\frac{v^2\,sin(2\,\theta)}{g}[/tex]
we can use them to solve for the angle by first isolating the value [tex]v^2[/tex] which is common in both equations:
[tex]v^2=2\,h\,g/sin^2(\theta)=2\,(15)\,g/sin^2(\theta)=30\,(g)/sin^2(\theta) \\ \\v^2=R\,g/sin(2\,\theta)=60\,(g)/sin(2\,\theta)[/tex]
and now, making those to expressions equal and using the formula for the sine of a double angle, we get:
[tex]\frac{30\,(9.8)}{sin^2(\theta)} =\frac{60\,(g)}{sin(2\,\theta)} \\30\,(g)\,sin(2\,\theta)=60\,(g)\,sin^2(\theta)\\sin(2\,\theta)=2\,sin^2(\theta)\\2\,sin(\theta)\,cos(\theta)=2\,sin(\theta)\,sin(\theta)\\cos(\theta)=sin(\theta)[/tex]
This happens when [tex]\theta=45^o[/tex]
