Answer:
The answer is "91 m"
Explanation:
[tex]v_0 = 2.5 \ \frac{m}{s}\\\\a = 4.2\ \frac{m}{s^2}\\\\t = 6.0\ s\\\\\Delta x=?[/tex]
Using formula:
[tex]\Delta x = v_0 t +\frac{1}{2} at^2\\\\[/tex]
[tex]= 2.5 \times 6.0 +\frac{1}{2} \times 4.2 \times 6.0^2\\\\= 90.6\ m \approx 91\ m[/tex]
Please help me with this!!!
Answer:
Its all about figuring out what numbers you times by
Explanation:
soooooooooo just x the numbers until you get it right, and i'm guessing your in a school soooo ask your teacher aswell :)
A uniform metre ruler scale balanced at 40 cm mark, when weight 25 gf and 10gf are suspended at 10cm mark and 75 cm mark respectively.Calculate the weight of the metre scale.
Answer:
40 gf.
Explanation:
Please see attached photo for diagram.
In the attached photo, W is the weight of metre rule.
The weight of the metre rule can be obtained as follow:
Clockwise moment = (W×10) + (10×35)
Clockwise moment = 10W + 350
Anticlock wise moment = 25 × 30
Anticlock wise moment = 750
Clockwise moment = Anticlock wise moment
10W + 350 = 750
Collect like terms
10W = 750 – 370
10W = 400
Divide both side by 10
W = 400/ 10
W = 40 gf
Thus, the weight of the metre rule is 40 gf
Answer:
40 gf
Explanation:
The balance point of the uniform meter rule with the suspended weights = 40 cm = The pivot point
The location where the 25 gf weight is suspended = 10 cm
The location where the 10 gf weight is suspended = 75 cm
Let W represent the weight of the meter rule.
We have that the location of the application of the weight of the meter rule is at the center, 50 cm mark, point
Given that the meter rule is balanced, and taking moment about the pivot point, we have;
The moment om the left hand side, LHS, of the pivot point = The moment on the right hand side, RHS, of the pivot point
The moment on the LHS = 25 gf × (40 cm - 10 cm) = 750 gf·cm
The moment on the RHS = W × (50 cm - 40 cm) + 10 gf × (75 cm - 40 cm)
The moment on the RHS = W·(10 cm) + 350 gf·cm
∴ 750 gf·cm = W·(10 cm) + 350 gf·cm
W·(10 cm) = 750 gf·cm - 350 gf·cm = 400 gf·cm
W = (400 gf·cm)/(10 cm) = 40 gf
The weight of the meter scale (rule), W = 40 gf.
A penny is dropped into a well. It takes 5 seconds to fall. Calculate the depth of the well in feet.
Answer:
d=1/2 (a)(t^2)
D = distance
A = acceleration
T = time
acceleration due to gravity is 32 ft/second
so, d=1/2 (32)(5^2)
d=16(25)
d=400
Explanation:
Answer:
400 ft.
Explanation:
D= 1/2 gt^2
=1/2(-32 ft/sec^2)(5 sec^2)
= -(1/2)(32)(25) ft
D= -400 ft, down
Help me and I'll make u Brainliest and follow u
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons
31. D. protons and neutrons are relatively heavier than electrons.
1.how would you calculate the atomic mass of an atom of silver (at)?
2.the element chlorine (CI) has 17 protons and 17 electrons. What happens to an atom of chlorine (CI) if it gains an electron?
3. How does an atom differ from a molecule?
4. How do protons, neutrons, and electrons differ?
5. The element lithium (Li) has 3 protons and 3 electrons. The element fluorine (F) has 9 protons and 9 electrons. An atom of the element lithium (Li) transfers an electron to an atom of the element fluorine (F). Which type of bond results between The atoms, and what happens to the charges in each of the atoms?
6. Why do the minerals graphite and diamond look different even though they’re made from the same element, carbon (c)?
Answer:
1. atomic mass of silver 108
2. 18 electrons
3.an atom is the smallest particle of a substance that can exist by itself.
molecules are groups of atom
Explanation:
1. periodics table
2. gains electron, becomes negative
Answer:
To determine the atomic mass of silver, or any other element, add the number of protons and the number of neutrons together.
If a chlorine atom gains an electron, it will have an unequal number of protons and electrons, which makes it an ion. Because electrons are negatively charged, the ion will be negatively charged, also called an anion.
An atom is the smallest component of an element that retains all of the chemical properties of that element. A molecule is two or more atoms that have bonded together.
Protons and neutrons are found in the nucleus of an atom, while electrons are found in the area surrounding the nucleus of an atom. Protons have a positive charge, electrons have a negative charge, and neutrons have no charge.
Because the lithium atom loses a negatively charged electron, it becomes a positively charged ion, or cation. Because the fluorine gains a negatively charged electron, it becomes a negatively charged ion, or anion. A bond between an anion and a cation is an ionic bond.
Graphite and diamond look different because the carbon atoms bond to one another in different ways in the two minerals. This gives each mineral a unique lattice structure and, as a result, a different physical appearance.
Using diagram 1.1 and diagram 1.2, compare the number of turn of the coils, the pattern of the iron fillings and the angle of deflection of the ammeter pointer
Answer:
The number of turns in the second coil is more than the coil 1.
Explanation:
The magnetic field lines are the imaginary path on which an isolated north pole moves if it is free to do so.
The tangent at any point to the magnetic field line, gives the direction of magnetic field at that point.
More be the crowd ness of magnetic field lines more is the strength of magnetic field.
Here the crowd ness of magnetic field lines is more in figure 2 , so the magnetic filed in figure 2 is more than 1. It shows that the number of turns in the second coil is more than the 1 and also the current in the coil 2 is more than 1 .
Satellite technology has allowed us to monitor areas that were once so remote that we had no way of monitoring them. Review the statements and choose the one that best describes how we can use this technology to benefit the environment.
Large ocean liners use satellites to aid in navigation. This type of navigation aid is also used on cruise ships. Using satellites can help these large ships navigate waters during bad storms.
Satellite surveillance can be used to aid in port security. Satellite data can be monitored and evaluated by complex computer systems. These systems can alert officials when something unusual occurs.
Satellite technology allows us to monitor and track the changes in the polar ice sheets. This can help us plan and direct conservation efforts for the animals that depend on polar ice in order to survive.
Satellite surveillance has allowed us to map areas that were previously too remote to observe. This helps developers to locate and choose sites for large resorts.
"Satellite technology allows us to monitor and track the changes in the polar ice sheets. This can help us plan and direct conservation efforts for the animals that depend on polar ice in order to survive."
This is the answer because the other answers don't really tackle helping the environment head-on instead it sorta helps society instead. Since we are looking for the ways satellite tech can help the environment and the polar ice caps is a wonderful example of that...we can conclude that the third answer will most likely be the correct answer for this question
Hope this helped you!!!! :)
Describe los cambios en velocidad y aceleración durante las etapas de un salto en paracaídas. Salto desde avioneta
Answer:
Initially the acceleration is acceleration due to gravity and after that it is zero.
Explanation:
Describe the changes in speed and acceleration during the stages of a parachute jump. Jump from plane
As the person jump with the parachute and till the parachute is not opened, then in this condition, the acceleration is acceleration due to gravity due to which he moves in the downwards direction.
As the parachute is opened, the drag force of air and the buoyant force due to the air acts on the parachute in the upwards direction. So, the net acceleration is zero ad the force due to the gravity is balanced by the drag force and the buoyant force and thus the acceleration if zero and the person is safe.
the bodies in this universe attract one another name the scientist who propounded this statement
Answer: The scientist named Isaac Newton proposed this universal law of gravitation.
It is given that the bodies in this universe attract one another.
It is required to name the scientist who propounded this statement.
What is the name of the scientist who propounded this statement?According to Newton's law of gravitation, every object in the universe attracts every other object with a force that is proportional to the multiplication of the masses and inversely proportional to the square of the distance between the objects. This is the universal law that means this is a constant term that can't be changed with respect to place which was proposed by Isaac Newton in 1687.
Therefore, Isaac Newton proposed this universal law of gravitation.
Learn more about gravitation here:
https://brainly.com/question/12528243
#SPJ5
what is the closest to the order of magnitude of the energy rquired to split a nucleus in to its individual protons and neutrons
Answer:
More than two million electron volts.
Explanation:
More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.
which of the following is not an equation of motion:- v=u+at; s=ut+at; v^2-u^2=2as; s=ut+1/2 at^2
Answer:
s=ut+at
its not the equation of motion..
hope it helps stay safe healthy and happy.....Explain how you can use the factors of production to produce a fruit juice in a production company
Answer:
The factors of production include Land, Labour, Capital and Enterpreneurship
Explanation:
The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.
The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.
In which region is there most likely to be a volcano
A
B
C
D
It was found that ice cream sales decrease significantly as the temperature outside decreases; a very strong relationship was found. What is the most likely correlation coefficient from this hypothetical study
Answer:
Value closest to 1
Explanation:
It is described from the scenario above that ice cream sales decreases as the outside temperature increases, hence showing a strong relationship between both variables (icream sales and temperature). The correlation Coefficient is a metric used in regression modeling to depict the strength of relationship between two variables, (The dependent and independent variables). Correlation Coefficient ranges from (-1 to +1). With values close to 1 or - 1. Also the positive and negative signs are used to show the type of relationship between the variables. If an increase in variable A leads to a decrease in variable B, then we have negative correlation (-) ; while an increase or decrease in both variables depicts a positive correlation. The most likely correlation Coefficient for the study above will be a positive value which is close to 1 since the relationship is described as strong.
En la figura, la tensión desarrollada en cada
cuerda está dada por los dinamómetros:
T1=8 N y T2=6 N, y el ángulo de inclinación
de la primera cuerda es de 45°. Determine la
masa de la caja que debe sostener y el
ángulo con respecto a la horizontal.
Answer:
Parte A
El ángulo con respecto al horizonte, de la segunda cuerda es de aproximadamente 19,47°
Parte B
La masa de la caja que se va a sostener es de aproximadamente 0,7808 kg.
Explanation:
Parte A
Los parámetros dados son;
La tensión en la cuerda, T₁ = 8 N
La tensión en la cuerda, T₂ = 6 N
El ángulo de inclinación de la primera cuerda con la horizontal, θ₁ = 45°
Sea θ₂ el ángulo de inclinación de la segunda cuerda, obtenemos;
T₁·cos (θ₁) = T₂·cos (θ₂)
∴ 8 N × cos (45°) = 6 N × cos (θ₂)
cos (θ₂) = 8 N × cos (45°) / (6 N) = (√2)/2 × (4/3) = (2·√2)/3
θ₂ = arcos ((2·√2) / 3) ≈ 19,47°
El ángulo con respecto al horizonte, de la segunda cuerda, θ₂ ≈ 19,47°
Parte B
El peso de la caja, W = T₁·sin (θ₁) + T₂·sin (θ₂)
∴ W = 8 N × sen (45 °) + 6 N × sen (19,47 °) ≈ 7,66 N
El peso de la caja que se va a sostener, W ≈ 7,66 N
La masa de la caja que se va a sostener, m ≈ 7,66 N / (9,81 m/s²) ≈ 0,7808 kg
a ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. what is the balls overall speed at the top of its trajectory?
Answer:
30m/ s
Explanation:
this is an example of a projectile, where the path traced by the ball will be a downward parabola.
one must know that the vertical velocity of an object having projectile motion is zero at the top of its trajectory and that the horizontal velocity remains constant throughout.
this means, at the top of the trajectory the ball's overall speed will be equal to its horizontal velocity.
and horizontal velocity is given 30 m/s
hence, overall speed of the ball = 30m/ s
a stone of mass 250kg and another stone of mass 400 kg are kept at a distance of 100m what amount of gravitational force develops between them?
Explanation:
Hey there!
Given;
Mass of one object (m1) = 250kg
Mass of another object (m2) = 400 kg
Distance (d) = 100 m
Gravitational constant (g) = 6.67*10^-11
Now;
[tex]f = \frac{g.m1.m2}{ {d}^{2} } [/tex]
Keep all values;
[tex]f = \frac{6.67 \times {10}^{ - 11} \times 250 \times 400}{ {(100)}^{2} } [/tex]
Simplify
[tex]f = \frac{6.67 \times {10}^{ - 11} {10}^{5} }{10000} [/tex]
[tex]f = \frac{6.67 \times {10}^{ - 6} }{10000} [/tex]
Therefore, gravitational force is 6.67*10^-10.
Hope it helps!
what are MA and VR of a lever?
Explanation:
Mechanical advantage (MA) = Load/Effort. Velocity ratio (VR) = distance effort moves/ distance load moves in the same time
A car took 5 minutes to travel from town A to town B which are 12km apart.Calculate the average speed of the path.
Speed = distance / time
Speed = 12km / 5 minutes
Speed = 2.4 km per minute
Speed is measured per hour, 1 hour has 60 minutes.
2.4 km per minute x 60 minutes = 144 km per hour
Based on what you have read provide two positives and two negatives the Suarez family would face if they switch to organic farming
Hi, you did not enter the text about the Suarez family, which makes it impossible for this question to be answered accurately. However, from the context of your question, it is possible to see that you want to know two positive and negative points that the Suarez family would observe when starting a planting of organic agriculture.
Among the negative points, we can say that organic agriculture has a high cost, as the techniques used in it require a greater number of resources, which can make not only the service more expensive, but also the product. A second negative point is that the techniques used in organic agriculture are more difficult than the techniques used in conventional agriculture, since all management of organic crops must be carried out without the application of chemical products.
Among the positive points, we can say that the growing number of consumers of organic products can increase the profit that the family will have from the sale of these products. In addition, the family will have healthier, less polluted and more productive land.
Answer:
Sample response: Organic farming would have higher costs, and would be more complex than conventional farming. However, the Suarez family could charge a higher price for organic produce. This type of farming also would be better for the land.
Explanation:
Which describes an atom that has fewer neutrons than protons and more electrons than protons?
negative compound
positive compound
positive ion
negative ion
Answer:
Negative ion
.................
A ball tied on a string rotates in a circular path as shown above. The only forces acting on the ball at any point are the weight and of the string. What is the equation for the net centripetal force at point C?
Answer:
the third one T-W
Explanation:
the direction of the Tension and weight are opposite
What is Unit and standard unit?
Answer:
The standard quantity with which we carry out the measurement of any physical quantity of the same kind is called a unit.
If the radius of curvature of a mirror is 15m and the distance of the object from the mirror is 10m. Find the distance of the image from the mirror and the magnification of the object in meter
Answer:
Data given.
focal length (f)=15m÷2=7.5m
Distance of the object(U)=10m
Image distance (v)=?
Magnification (M)=?
Solution:
From:
1/f=1/u+1/v
1/7.5=1/10+1/v=75
then v=75m
Magnification, M=u/v
=75/10=7.5
Then magnification=7.5
Answer:
v = 30 m and m = 3
Explanation:
Given that,
The radius of curvature of the mirror, R = 15 m
Focal length, f = 7.5 m
Object distance, u = -10 m
We need to find the image distance and the magnification of the object.
Using mirror's formula,
[tex]\dfrac{1}{v}-\dfrac{1}{u}=\dfrac{1}{f}\\\\\dfrac{1}{v}=\dfrac{1}{f}+\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{(7.5)}+\dfrac{1}{(-10)}\\\\v=30\ m[/tex]
The magnification of the object in mirror is given by :
[tex]m=\dfrac{-v}{u}\\\\m=\dfrac{-30}{-10}\\\\m=3[/tex]
So, the distance of the image from the mirror and the magnification of the object are 30 m and 3 respectively.
Please help it's for a test.
A car of mass 1000kg is traveling 30m/s
a) What is the kinetic energy?
b) How high will it have to travel up a hill to have the same potential as kinetic energy as this speed? Remember Ep-Ek
Answer:
Explanation:
[tex]KE=\frac{1}{2}mv^2[/tex] so filling in:
[tex]KE=\frac{1}{2}(1000)(30)^2[/tex] so to 2 sig figs (which is actually not accurate, but oh well...)
KE = 450000 J
If we want to find out how high it will have to travel up a hill so that its PE is the same as the KE at this speed, we set the value for KE = to PE:
450000 = (1000)(9.8)h so
[tex]h=\frac{450000}{(1000)(9.8)}=45.9m[/tex]
Find the sum. Express the answer in scientific notation. (1.54 x 10^6)+(6.15 x 10^6)
Answer:
[tex] { \tt{(1.54 \times {10}^{6}) + (6.15 \times {10}^{6}) }} \\ = { \tt{(1.54 + 6.15) \times {10}^{6} }} \\ = { \tt{7.69 \times {10}^{6} }}[/tex]
Q011) The Doppler effect a. occurs when the frequency of sound waves received is lower if the wave source is moving toward you than if it's moving away. b. occurs when the pitch of a sound gets lower if the source is receding. c. is the basic explanation for the blue shift of light in our Universe. d. can be applied only to sound waves.
Answer:
Option (c) is correct.
Explanation:
The apparent change in the frequency of light due to the relative motion between the source and the observer is called Doppler's effect.
When the source is moving towards the observer which is at rest, the apparent frequency increases and if the observer is moving away the frequency of sound decreases.
It occurs for both light and sound.
So, to explain the blue shift of light in the universe is due to the Doppler's effect of light.
Which of the following best distinguishes the relationship between applied research and basic research?
A Applied research commercializes the discoveries of basic research and brings them to the general public.
B Basic research takes place in academia, and complex research takes place in industry.
C Basic research provides fundamental knowledge that can be used to conduct applied research.
D Applied research is not published for peer review, but basic research must be.
Answer:
C. Basic research provides fundamental knowledge that can be used to conduct applied research.
Explanation:
Applied research is used to solve practical and specific problems. Basic research is used to advance theories and scientific knowledge; it might not result in an invention or a solution, but can be used to gain knowledge about a specific subject.
help please correct answer i will mark brainliest
Answer:
19.21ms-¹
Explanation:
that is the solution above
Un alambre de plástico, aislante y recto mide 10 cm de longitud y tiene una densidad de carga de +150 nC/m, distribuidos de manera uniforme por toda su longitud. Se encuentra sobre una mesa horizontal. A) Encuentre la magnitud y la dirección del campo eléctrico que produce este alambre en un punto que está 8 cm directamente arriba de su punto medio. B) Si el alambre ahora se dobla para formar un círculo que se coloca aplanado sobre la mesa, calcule la magnitud y la dirección del campo eléctrico que produce en un punto que se encuentra 6 cm directamente arriba de su centro.
Answer:
English only
Explanation:
When solving problems related to Electric Fields, care must be taken about symmetries. In our particular case when we take a look to at the drawings of the attached file, we realize:
1.-By symmetry each dx associated at a, has an opposite dx with point b as reference. The respective dE ( the charge is uniform ) is the same, as the charge of the wire is positive the force and the Field on a test charge (+) located at h will be upward, therefore the components dEx will cancel each other and the Electric Field becomes E = Ey = ∫ 2×dE× cosθ
The solutions:
A) Ey = 4623 N/C
B) Ey = 19.34 N/C
E = Ey = ∫ 2×dE× cosθ
Here cosθ = h/ d ⇒ cosθ = h/√h² + x² dE = K× dQ / d²
d² = h² + x²
k = 8.9 ×10⁹ Nm²C⁻² ; dQ = λ×dx λ = 150×10⁻⁹ C h = 0.08 m
Then by substitution
Ey = 2 ∫[K× λ×dx/ (h² + x²) ] × h / √h² + x²
reordering that equation:
Ey = 2×K×λ×h ∫ dx / [√ ( h² + x² ) ]³ (2)
To solve the integral we make use of a change of variables
x = h × tanα then x² = h² ×tan²α and dx = h× sec²α dα
plugging that values in equation (2)
Ey = 2×K×λ×h ∫ h× sec²α× dα / [√ ( h² + h²tan²α)]³
Ey = 2×K×λ×h² ∫ sec²α× dα / [ h × √ (1 + tan²α)]³ 1 + tan²α = sec²α
Ey = 2×K×λ×h²× ∫ (sec²α / h³× sec³α )×dα
Ey = 2×K×λ/h × ∫ ( 1 / secα dα
Ey = 2×K×λ/h × sinα now we αneed to come back to our original variables:
as x = h × tanα tanα = x/h then x is the opposite leg in a right triangle and h the adjacent one then the hypothenuse is √ (h² + x²) then sin α = x/ √ (h² + x²)
Ey = 2×K×λ/h × x/ √ (h² + x²) |₀⁰°⁰⁵
Ey = 2×8.9×10⁹× 150×10⁻⁹× 5×10⁻²/8× 10⁻²× √ 10⁻² ( 8 + 5 ) N/C
Ey = 4623 N/C
To answer the second question again we will make use of symmetries if you look at drawing ( Figure 2 ) you see that again the components in direction of x-axis cancel each other and the components in y-axis direction will add. Then
Ey = ∫ dE× cosθ
following the same procedure we will find:
Ey = ∫ [K×λ × dl/d²] × h/ d
The importan point here is that the radius of the circle is
2×π×r = 0.01 ( the length of the wire) ⇒ r = 0.16×10⁻² m
And we need to take into account that the integration is over the circle and the length of the circle is 0.01 m or ××2×π×r. All other factors are constant. Then by substitution
Ey = [K×λ ×h× / ( √ r² + h²)³ ] × 10⁻² N/C
Ey = 8.9 × 10⁹ × 150× 10⁻⁹ × 6× 10⁻² × 10⁻² / √ 10⁻² ( 0.16 + 6)
Ey = 0.8 × 10² / 6
Ey = 19.34 N/C
