A block is attached to the end of a spring. The block is then displaced from its equilibrium position and released. Subsequently, the block moves back and forth on a frictionless surface without any losses due to friction. Which one of the following statements concerning the total mechanical energy of the block-spring system this situation is true?
1. The total mechanical energy is dependent on the maximum displacement during the motion.
2. The total mechanical energy is at its maximum when the block is at its equilibrium position
3. The total mechanical energy is constant as the block moves back and forth.
4. The total mechanical energy is only dependent on the spring constant and the mass of the block.

Answers

Answer 1

Answer:

The correct option is;

3. The total mechanical energy is constant as the block moves back and forth

Explanation:

The total mechanical energy is the sum of the potential and kinetic energies of the system

For a system that is isolated from the effects of external forces, but being acted upon by the internal conservative forces within the system, the total mechanical energy is constant

For a black and spring system, we have total mechanical energy, E = 1/2×K×A².

Where;

K = Constant

A = The amplitude of motion

Therefore, where there is no loss to friction, with A, remaining constant, the total mechanical energy will be constant.


Related Questions

*If someone says v-u=0 ,what does it mean. *What is the relation among mometum,mass and velocity. *A moving bus a little distance forward even when breaks are applied on it which Newton's laws work here? *Under what conditions acceleration of a moving object will be zero?

Answers

Answer:

1) It means that the acceleration is 0

2) Momentum, p = Mass, m × Velocity, v

3) Newton's second law of motion

4) The conditions where there are no resultant forces acting on the object

Explanation:

1) The value v - u =  0 means that the acceleration is 0

The relation between v and u is v = u + a·t

v - u = a·t

When v - u = 0 we have;

a·t = 0

a = 0 or t = 0

Acceleration, a = 0

2) The relation between momentum, mass and velocity is

Momentum, p = Mass, m × Velocity, v

p = m × v

3) The bus moving a little distance forward even when the breaks are applied is due to the following relation;

Force = Rate of change of momentum produced

Which is Newton's second law of motion

Therefore, where the the force is low, the rate of change of the momentum and therefore, the velocity will be low, and the bus will still move further after applying the breaks

4) According to Newton's first law of motion, the conditions under which the acceleration of a moving object will be zero includes conditions where there are no resultant forces acting on the object.

7. Calculate the force applied on an object if the Pressure exerted is 90 Pascal over an area of 900 cm2.

Answers

Answer:

Explanation: pressure = force / area

Rearrange to get: force = pressure x area. 900 cm2 = 0.09 m2

force = 90 x 0.09

= 8.1 N

famous comparative and superlative form​

Answers

Answer:

comparative----more famous, superlative----- most famous

[tex]\huge{\fbox{\red{Answer:}}}[/tex]

Word Given :

Famous

___________________✍

Comparative Form : more famous

Superlative Form : most famous

Hope you understand

please help ASAP.
these are examination questions ..
no nonsense answers .
i will mark as brainliest if you got it correct .​

Answers

Answer:

1st question c part

2nd question c part

what is the distance fallen for a freely falling ojvect 1 s after being dropped from a rest position

Answers

Answer:

111op

Explanation:

Answer:

11op

Explanation:good job and work hard

Describe the motion of water waves.

Answers

Answer:

Water waves are an example of waves that involve a combination of both longitudinal and transverse motions. As a wave travels through the waver, the particles travel in clockwise circles. The radius of the circles decreases as the depth into the water increases.

Match the words to the correct blanks in the sentences. Use each choice only once. a. The collapse of a protostar with less than 0.08 times the mass of the Sun is halted by________. b. As a protostar shrinks in size, its central temperature rises along with its________. c. A star that has not yet finished forming is called a_______. d. A forming star spins more rapidly as it collapses because of conservation of________. e. If a protostar has a mass too small for it to sustain nuclear fusion it becomes the type of object known as a________.A. thermal pressureB. angular momentumC. energy balanceD. degeneracy pressureE. brown dwarfF. gravitational equilibriumG. protostar

Answers

Answer:

The collapse of a protostar with less than 0.08 times the mass of the Sun is halted by DEGENERACY PRESSURE. b. As a protostar shrinks in size, its central temperature rises along with its THERMAL PRESSURE. c. A star that has not yet finished forming is called a__PROTOSTAR_____. d. A forming star spins more rapidly as it collapses because of conservation of ANGULAR MOMENTUM. e. If a protostar has a mass too small for it to sustain nuclear fusion it becomes the type of object known as a____BROWN DWARF____

Which describes a grizzly bear’s habitat? all the biotic factors in the ecosystem all the abiotic factors in the ecosystem the role of the bear in the ecosystem the physical area where the bear lives

Answers

Answer:

I found this question elsewhere on brainly and the answer was verified. Here it is!

Explanation:

Grizzly bear habitats is the habitat or the physical space where the bear lives. Grizzly bears can be found in many different habitats from dense forests to subalpine meadows, arctic tundra and open plains. We can also conclude that all of the bears live in grizzly bear's habitat in order to survive.

The best description of a grizzly bear’s habitat is:

D. the physical area where the bear lives

A habitat is the natural surrounding or place where an organism lives, grows and competes with other organisms for resources. It is a physical area.

There are three major types of habitat which includes:

Freshwater habitat: This refers to the area of water where animals live. Examples of animals that live in a freshwater habitat includes: sea turtle, fishes, etc. Examples of freshwater habitat include:RiversLakesPond, etcMarine water habitat: This is where a group of organisms live. Examples include:OceansSeas, etc.Coastal habitat: This is an intersection between the land and sea habitats.

A grizzly bear is a subspecies of brown bear and is resident in the northern plains of America and their habitat is a physical location where they live.

Therefore, the correct answer is option D

Read more here:

https://brainly.com/question/19482426

what is the scientific notation for 1,500,000​

Answers

Answer:

[tex]1.5 * 10^6[/tex]

Explanation:

Given

Digit: 1,500,000

Required

Represent using scientific notation

We start by expressing the given digit as a product of 1.5 and a multiple of 10

[tex]Digit = 1.5 * 1,000,000[/tex]

1,000,000 can be represented as 10⁶

So; the digit becomes

[tex]Digit = 1.5 * 10^6[/tex]

Hence, the scientific notation of 1,500,000 is 1.5 * 10⁶

why do objects in equilibrium have a net force of 0?

Answers

Answer:

Because there is no net force acting o an object in equilibrium.

Explanation:

When object is in equilibrium (either at rest or moving with constant velocity, the net force acting o it is zero.A vector can only have zero magnitude fall of its components are zero this means that all forces acting on the object are balanced.

An inventive child wants to reach an apple in a tree without climbing the tree. Sitting in a chair connected to a rope that passes over a frictionless pulley, the child pulls on the loose end of the rope with such a force that the spring scale reads 250 N. The child’s true weight is 320 N, and the chair weighs 160 N. (a) Show that the acceleration of the system is upward and find its magnitude. (b) Find the force the child exerts on the chair.

Answers

Answer:

(a) 0.42 m/s²

(b) 83 N

Explanation:

Assuming g = 10 m/s².

Draw free body diagrams for the child and the chair.

There are three forces on the child:

Tension force T pulling up,

Weight force Mg pulling down,

and normal force N pushing up.

There are three forces on the chair:

Tension force T pulling up,

Weight force mg pulling down,

and normal force N pushing down.

Sum of forces on the child in the y direction:

∑F = ma

T + N − Mg = Ma

Sum of forces on the chair in the y direction:

∑F = ma

T − N − mg = ma

Add the equations together to find the acceleration.

2T − Mg − mg = Ma + ma

a = (2T − Mg − mg) / (M + m)

a = g (2T − Mg − mg) / (Mg + mg)

a = (10 m/s²) (2 × 250 N − 320 N − 160 N) / (320 N + 160 N)

a = 0.42 m/s²

Plug into either equation to find the normal force.

T + N − Mg = Ma

250 N + N − 320 N = (320 N / 10 m/s²) (0.42 m/s²)

N = 83 N

What is the goal of the scientific method

Answers

Answer:

Regardless of how the steps are documented, the goal of scientific method is to gather data that will validate or invalidate a cause and effect relationship.

Hope this helped!!!

If a suitcase has a mass of 20 kg, what is the force of gravity acting on it?​

Answers

Explanation:

Assuming the suitcase is near the surface of the earth, g = 9.8 m/s².

F = ma

F = (20 kg) (9.8 m/s²)

F = 196 N

A 1.00-kg glider attached to a spring with a force constant 25.0 N/m oscillates on a frictionless, horizontal air track. At t = 0, the glider is released from rest at x = -2.80 cm (that is, the spring is compressed by 2.80 cm). (a) Find the period of the glider's motion. How does the period depend on the mass and the spring constant? Does it depend on the amplitude of oscillation? s (b) Find the maximum values of its speed and acceleration. speed m/s acceleration m/s2 (c) Find the position, velocity, and acceleration as functions of time. (Where position is in m, velocity is in m/s, acceleration is in m/s2, and t is in s. Use the following as necessary: t.) x(t) = v(t) = a(t) =

Answers

Answer:

a)  T = 1.26 s , b)  v_max = 0.14 m / s ,  a_max = 0.7 m / s²

c) x = 0.028 cos (5 t) ,    v = - 0.14 sin 5t,   a = - 0.7 cos 5t

Explanation:

This is a simple harmonic motion exercise that is described by the equation

    x = A cos (wt +Ф)

with

          w = √ (k / m)

let's apply this expression to our case

a) Angular velocity is related to frequency

          w = 2π f

frequency and period are related

          f = 1 / T

we substitute

         2π / T = √ (k / m)

         T = 2π √(m / k)

let's calculate

         T = 2π √(1/25)

          T = 1.26 s

In the expression for the period, the amplitude does not appear, therefore there is no dependence, as long as Hooke's law is fulfilled, which is correct for small amplitudes.

b) in the initial equation we have the position as a function of time, let's use the definition of speed and acceleration

           v = dx / dt

           v = - A w sin (wt + Ф)

the speed is maximum when the sine is -1

            v_max = A w

            w = √ (k / m)

            w = √ 25/1

            w = 5 rad / s

the amplitude of the movement is equal to the maximum compression of the spring

            A = 2.8 cm = 0.028 m

             

we substitute

            v_max = 0.028 5

            v_max = 0.14 m / s

acceleration

             a = dv / dt

             a = - A w² cos (wt + Ф)

the acceleration is maximum when the cosine is -1

             a_max = A w²

let's calculate

             a_max = 0.028 5²

             a_max = 0.7 m / s²

c) let's start by finding the phase constant

              v = -A w cos (wt + Ф)

at t = 0 they indicate that the system has v = 0

              0 = -A w sin (0 + Ф)

              Ф = sin⁻¹ 0

              Ф = 0

we write the equation

            x = 0.028 cos (5 t)

           v = - A w sin (wt + Ф)

           v = - 0.028 5 sin (5t + 0)

           v = - 0.14 sin 5t

acceleration

           a = - A w² cos (wt + Ф)

           a = - 0.028 5 2 cos (5 t + 0)

           a = - 0.7 cos 5t

Eli and Andy want to find out which of the two is stronger. Eli pushes a table with a force of 120 newtons while Andy pushes the table from the opposite side with a force of 125 newtons. Ignoring the masses of Eli and Andy, what is the resultant acceleration of the table if its mass is 10.0 kilograms?

Answers

Answer:

a = 0.5 m/s²

Explanation:

the type of problem is called a Newtons second law of motion.

and the equation would be the sum of F = m * a  where m = mass and a = acceleration

forces are 125N and the opposite direction is 120N

Eli pushes the table with a force of 120N towards Andy

and

Andy pushes the table with a force of 125N towards Eli

mass of table given as 10 kg.

using the equation

120N - 125N = 10kg * a

a = (120-125) / 10

a = -0.5 m/s² so the acceleration is in the direction of Andy's force towards Eli.

therefore a = 0.5 m/s²

Answer:

B.  

0.50 meters/second2

Explanation:

answer answer answer it it it

Answers

It is B. too much air resistance could cause you to fly the other way, as well as cause you damage...

Hope this helped ♥︎

Answer:

Parachutes

Explanation:

Your parachute allows you to descend more slowly because it lowers terminal velocity by increasing your air resistance. Most parachutes are designed to create a large amount of drag and allow you to land at a safe, low speed.

HOPE THIS HELPS!!!

MARK IT AS BRAINLIEST !!!! ( the crown icon sometimes )

a metre rod on wedge is example of unstable equilibrium.why

Answers

Answer:

because it has no balance

An object weighs 980N on the earth’s surface (i) What is its mass? (ii) If the same object weighs 360N on another planet, find the force of gravity on that planet.

Answers

Weight = mass*gravity. Hence mass = 980/9.8 = 100kg. Gravity of planet 2 = weight/mass = 3.6 m/s^2

Using your own word, tell me what is the difference between an element and a compound? Make sure to give an example of each.

Answers

Answer:

Hey there!

Elements only contain one type of atom, and a compound contains atoms of different elements chemically combined together. For example, gold is an element, because it only is made of gold atoms, where water or H2O is a compound.

Let me know if this helps :)

Answer:

A compound contains atoms of different elements chemically combined together in a fixed ratio. An element is a pure chemical substance made of same type of atom. Elements contain only one type of atom.

Example:

Explanation:

Hi :) how to do this?

Answers

Answer:

The answer is b

Hope this helps you!

If a car has a speed of 36m/s how long will it take to go 100 m

Answers

It will take 2.77..... seconds
The answer to this question is 2.77..... seconds.

the resistance per meter is 10 ohm. if the resistance of the material of the wire is 50 then 10^-8 ohm. find the area of cross section of the wire.

the question is at some point wrong or missing a word please help me with the question and answer!

Answers

Answer:

5×10⁻⁸ m²

Explanation:

I assume you mean the resistivity of the material is 50×10⁻⁸ Ωm.

R = ρL/A

10 Ω = (50×10⁻⁸ Ωm) (1 m) / A

A = 5×10⁻⁸ m²

A student uses a spring scale attached to a textbook to compare the static and kinetic friction between the textbook and the top of a lab table. If the scale measures 1,580 g while the student is pulling the sliding book along the table, which reading on the scale could have been possible at the moment the student overcame the static friction?

Answers

Answer:1860g

Explanation:The force would have to be greater than 1580g, which is when the student is pulling the sliding book with the spring scale

Which of these is an example of an elastic collision? A. The cue ball crashing into the eight balls on a pool table. B. Two cars colliding in an accident and moving together in the end. C. A kid landing a flip on a trampoline.

Answers

Answer:

The cue ball crashing into the eight balls on a pool table.

Explanation:

Elastic and inelastic collisions are two types of collisions.

For elastic collision, both the momentum and the kinetic energy before and after the collision remains conserved.

Out of the given options, the option that shows an example of an elastic collision is option A " The cue ball crashing into the eight balls on a pool table." All the eight balls after crashing moves with different velocity.

John owns a used 2003 mustang Mach 1, he spots a news crew with a bunch of people what should he do? A) Rev his engine at the highest RPM B) Do a burnout C) Drive near the Crowd and drop a gear and hurl into the crowd D) ALL OF THE ABOVE

Answers

Each of the three choices is tasteless, exhibitionist, juvenile, and dangerous.  John should do none of them.

Encountering a news crew, there's no reason for John to call attention to himself in a childish way, or interfere with their work in any way.

What he should do is:

==> Slow down

==> Pass the scene cautiously

==> Resume his normal, legal speed quietly, in case the crew happens to be recording audio at the moment.

Mysteriously, this course of action is nowhere to be found among the choices listed.

Answer:

all three options :)

Explanation:

cuz merica

Is it (P)otential or (K)inetic energy

Answers

Answer:

Think of it like this potential energy is exactly what it sounds like it has potential. while kinetic energy which is what the body possesses by virtue of being in motion.

Explanation:

What is the Opportunity Cost in textbooks from going from point A to B?

Answers

Answer:

60.00

Explanation:

you welcome

A 310 turn solenoid with a length of 18.0 cm and a radius of 1.60 cm carries a current of 1.90 A. A second coil of four turns is wrapped tightly around this solenoid, so it can be considered to have the same radius as the solenoid. The current in the 310 turn solenoid increases steadily to 5.00 A in 0.900 s.(a) Use Ampere's law to calculate the initial magnetic field in the middle of the 310 turn solenoid.T(b) Calculate the magnetic field of the 310 turn solenoid after 0.900 s.T(c) Calculate the area of the 4-turn coil.m2(d) Calculate the change in the magnetic flux through the 4-turn coil during the same period.Wb(e) Calculate the average induced emf in the 4-turn coil.VIs it equal to the instantaneous induced emf? Explain.(f) Why could contributions to the magnetic field by the current in the 4-turn coil be neglected in this calculation?

Answers

Answer:

Given that;

Number of turns in the solenoid N = 310

Length of the solenoid L = 18 cm = 0.18 m

Radius of the solenoid r = 1.60 cm = 0.016 m

Current in the first Circuit I₁ = 1.90A

Number of turns in second coil N₂ = 4

Final Current solenoid I₂ = 5.0 A

Time interval to change the time Δt = 0.9 s

a)

According to Ampere's law, magnetic field inside a conductor is calculated as;

B₁ = ц₀N₁I₁ / L

(ц₀ = 4π × 10⁻⁷  constant)

therefore we substitute

{(4π × 10⁻⁷) ×  310 × 1.9A} / 0.18m

= 0.0041 T

b)

Magnetic field inside the solenoid after t = 0.9

B₁ = ц₀N₁I₂ / L

= {(4π × 10⁻⁷) ×  310 × 5.0A} / 0.18m

= 0.0108 T

c)

Area of coil is

A = πr²

A = π ×  ( 0.016 )²

A = 0.000804 m²

d)

Change in magnetic influx is

dФ = (B₂ - B₁) A

= ( 0.0108 T - 0.0041 T) × 0.000804 m²

= 0.0000053868 ≈ 5.39 × 10⁻⁶

e)

Average induced emf is

e = -N₂ ( dФ / dt )

e = ( -4 ) ( 5.39 × 10⁻⁶ / 0.9)

e = - 2.39 × 10⁻⁵V ( NOTE, this is not equal to the instantaneous induced emf )

f)

The induced emf is very low, so the contributions to the magnetic field in the coil is Negative.

An aircraft travelling at 600km/h accelerates steadily at 10km/h per second. Taking the speed of sound as 1100km/h at the aircraft's altitude how long will it take to reach the sound barrier?​

Answers

speed of sound is the final velocity [tex] v=1100[/tex]

and initial velocity $u=600$ , $a=10$

$v=u+at$

$t=\dfrac{v-u}{a}= \dfrac{500}{10}$

$\implies t=50 h$

Calculate the current passing through a conductor of resistance 4ohms. If a potential difference of 15V its ends______​

Answers

Explanation:

current = velocity/resistance

I = V/R

15/4

current = 3.75A

hope this helps...

Other Questions
(Score for Question 1: ____ of 5 points)1. The equation of a circle is x2 + y2 - 4x + 2y - 11 = 0. What are the center and the radius of the circle?Show your workAnswer:) Given that MTW CAD, which angles are corresponding parts of the congruent triangles? W C W D W A Musah stands at the center of a rectangular field. He first takes 50 steps north, then 25 steps west and finally 50 steps on a bearing of 315. Sketch musah's movement. How far west is musah's final point from the center? How does Machiavelli try to "sell" his text to Lorenzo di Medicci? What is the answer that = n? Determine if the event described is independent or dependent. Two people are standing in line at a movie theater trying to decide on which movies to see. a independent b dependent c neither d both can u explain and answer this question for me thanks Express the following in scientific notation: 0.0000079 PLEASE ANSWER!!! Brainliest to whoever answers at first!Order the following expressions by their values from least to greatest. If two polygons are similar, must they also be congruent? Given that a is a multiple of 456, find the greatest common divisor of 3a^3+a^2+4a+57 and a. Categorize each enzyme based on its specific function in glycolysis, gluconeogenesis, or both pathways.a. Triose phosphate isomerase b. Glucose 6-phosphatase c. Hexokinase d. Fructose I ,6-bisphosphatase e. Phosphofructokinase f. Pyruvate kinase In a competitive industry, it takes a fixed ratio of one skilled worker and two unskilled workers to produce a unit of output. If the immigration of unskilled workers lowers the wage of unskilled workers, it will likely Use the table shown in the image! 1. Which equation expresses y in terms of x? A. y=17x B. y=25x C. x=51y D. x=85y 2. What is the charge for renting a machine for 3.5 hours? A. $51.50 B. $59.50 C. $65.50 D. $86.50Please include all work! 15=3y+7.y= please help me with my assignment i havelike 57 more questions to answer and 10% im trying by myself to solve the rest are kinda difficult Given: ABCD is a parallelogram.Prove: mA + mB + mC + mD = 360By the definition of a parallelogram, ADBC and ABDC. Using, AD as a transversal, A and are same-side interior angles, so they are . By the definition of supplementary, mA + mD = 180. Using side as a transversal, B and C are same-side interior angles, so they are supplementary. By the definition of supplementary, mB + mC = 180. So, mA + mD + mB + mC = 180 + 180 by the property. Simplifying, we have mA + mB + mC + mD = 360.1) D2) Supplementary3) BC4) Addition Consider the following Causal Claim:All of a sudden he's all Let's go to Beano's for a change. Right. Am I supposed to think it's just coincidence his old girlfriend started working there?This is an example of:_______.A. Common Thread reasoning. B. Relevant Difference reasoning. If you want to turn a ball into a giant water balloon, how many cubic feet of lake water can you fill it with if the radius of this balloon is 1.5 feet? A shop sells DVDs and CDs.DVDs are sold at one price. CDs are sold at a different price.2 DVDs and 1 CD cost 35 2 DVDs and 2 CDs cost 45 Martin has 50 Does he have enough to buy 1 DVD and 3 CDs? One characteristic of weekly newspapers is that they usually serve national consumers rather than local consumers. tend to have a larger male readership than daily newspapers. emphasize local news and advertising. have a significantly lower CPM than daily newspapers. do not charge premium rates.