A balloon contains 0.118 mol of gas and has a volume of 2.58 L . If an additional 0.116 mol of gas is added to the balloon (at the same temperature and pressure), what will its final volume be? Can you also show the work so I can understand why is it that answer. thank you

Answer:

It has a negative charge and is located in orbitals around the nucleus

Explanation:

The statement describes an electron is " It has a negative charge and is located in orbitals around the nucleus."

The electron would be a subatomic particle with a negatively one elementary charge electric charge.

Protons, that have a positive charge, as well as neutrons, which have no electrical charge, make up the nucleus. Quarks were subatomic particles that make up protons but also neutrons.

Electrons were present surrounding the atom's nucleus, in contrast to protons as well as neutrons, that are contained within the nucleus at its core. Negative electrons were drawn to the positive nucleus since the electric charges of opposite polarity attract one another.

To know more about electrons and nucleus.

https://brainly.com/question/23366064

#SPJ3

Answer:

Protein biochemistry is the study of proteins. Protein biochemistry is a scientific field dedicated to the study of proteins, complex chains of amino acids which make up the building blocks of all living organisms.

Explanation:

I hope that helped

Copy and Pasted!

Answer:

Listen to what guy said on top.

Explanation:

polypeptide structures consisting of one or more long chains of amino acids residue.....

or my answer

Answer:

SN1 mechanism

Explanation:

The mechanism of this reaction is shown in the image attached.

The Di- n- pentyl ether is first protonated. The CH3(CH2)4OH is now a good leaving group as shown.

The attack of the bromide ion on the cation formed completes the mechanism to yield 1- bromopentane as shown in the mechanism.

Answer:

Calculate the moles of N2 molecules in 3.94 grams of nitrogen.

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules.

Explanation:

Calculate the moles of N2 molecules in 4.73 liters of nitrogen gas. FALSE. You can't make this conversion using only the conversion factor with units of g/mol. To convert liters to moles are necessaries pressure, temperature and volume of the gas to use PV = nRT

Calculate the grams of N2 in 10.58 liters of nitrogen gas. FALSE. As explained, you need, P,V and T to find the moles of the gas. With the moles you can find the mass using the conversion factor of 28.02g/mol

Calculate the moles of N2 molecules in 3.94 grams of nitrogen. TRUE. You can find the moles of N2 as follows:

3.94g N2 * (1mol/28.02g) = 0.14 moles of N2 molecules

Calculate the grams of N2 in 5.03 x 1020 moles of nitrogen molecules. TRUE. The mass in 5.03x10²⁰ moles of nitrogen molecules is:

5.03x10²⁰ moles * (28.02g/mol) = 1.4x10²²g of nitrogen.

Answer:

molar heat of combustion = -5156 *10³ kJ/mol

Explanation:

A quantity of 1.435 g of naphthalene , was burned in a constant-volume bomb calorimeter. Consequently, the temperature of the water rose from 20.28oC to 25.95oC If the heat capacity of the bomb plus water was 10.17 kJ/°C, calculate the heat of combustion of naphthalene on a molar basis; that is, find the molar heat of combustion.

Step 1: Data given

Mass of naphthalene = 1.435 grams

Initial temperature of water = 20.28 °C

Final temperature of water = 25.95 °C

heat capacity of the bomb plus water was 10.17 kJ/°C

Molar mass naphtalene = 128.2 g/mol

Step 2:

Qcal = Ccal * ΔT

⇒with Qcal =the heat of combustion

⇒with Ccal = heat capacity of the bomb plus water = 10.17 kJ/°C

⇒with ΔT = the difference in temperature = T2 - T1 = 25.95 - 20.28 = 5.67°C

Qcal = 10.17 kJ/°C * 5.67 °C

Qcal = 57.7 kJ

Step 3: Calculate moles

Moles naphthalene = 1.435 grams / 128.2 g/mol

Moles naphthalene = 0.01119 moles

Step 4: Calculate the molar heat of combustion

molar heat of combustion = Qcal/ moles

molar heat of combustion = -57.7 kJ/ 0.01119 moles

molar heat of combustion = -5156 *10³ kJ/mol

Answer:

d. van der waals force

Explanation:

Van der Waals force :

the weakest intermolecular forceand consist of dipole-dipole force and dispersion force.

Answer:

All of the above.

Explanation:

For a scientific hypothesis to be considered a hypothesis, it has to be testable. When conducting a lab experiment, it also allows the tester to predict what might occur during and after the experimentation. They are also explanatory. For example, theories are hypotheses that have been verified and can explain why something in nature takes place.

Answer: it will be basic

pH that ranges from 0-6 are acid

pH of EXACTLY 7 is neutral

pH greater than 7 are strongly basic or base

Answer:

option a

hope helps you

have a great day

Answer:

118.06 mL

Explanation:

The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:

2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O

According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:

2 moles HBr = 1 mol Ba(OH)₂

We can replace the moles by the product of the molar concentration (M) and volume (V):

2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂

Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:

V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂

                 = (2 x 0.311 M x 57.7 mL)/(0.304 M)

                 = 118.06 mL

Therefore, 118 mL of Ba(OH)₂ are needed.

Answer:

The correct answer is "-268.667°C".

Explanation:

Given:

Temperature,

= 4.483 K (below)

Now,

The formula of temperature conversion will be:

⇒ [tex]T(^{\circ} C)=T(K)-273.15[/tex]

By putting the values, we get

⇒            [tex]=4.483-273.15[/tex]

⇒            [tex]=-268.667^{\circ} C[/tex]

Thus the above is the correct answer.

Answer: If a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Explanation:

The relation between energy and wavelength is as follows.

[tex]E = \frac{hc}{\lambda}\\[/tex]

This means that energy is inversely proportional to wavelength.

As it is given that energy of a hydrogen atom and a helium atom is same.

Let us assume that [tex]E_{hydrogen} = E_{helium} = E'[/tex]. Hence, relation between their wavelengths will be calculated as follows.

[tex]E_{hydrogen} = \frac{hc}{\lambda_{hydrogen}}[/tex]    ... (1)

[tex]E_{helium} = \frac{hc}{\lambda_{helium}}[/tex]         ... (2)

Equating the equations (1) and (2) as follows.

[tex]E_{hydrogen} = E_{helium} = E'\\\frac{hc}{\lambda_{hydrogen}} = \frac{hc}{\lambda_{helium}} = E'\\\lambda_{helium} = \lambda_{hydrogen} = E'[/tex]

Thus, we can conclude that if a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Answer:

Ka = 3.45x10⁻⁶

Explanation:

First we calculate [H⁺], using the given pH:

To solve this problem we can use the following formula describing a monoprotic weak acid:

We input the data that we already know:

And solve for Ka:

Answer:

The full amount (5.00 g) will be dissolved in 1 L of water at 25°C.

Explanation:

The molecular weight (MW) of Vanillin (C₈H₈O₃) is calculated from the chemical formula as follows:

MW(C₈H₈O₃) = (12 g/mol x 8) + (1 g/mol x 8) + (16 g/mol x 3) = 152 g/mol

If 0.070 mol of C₈H₈O₃ are soluble per liter of water at 25°C, the maximum mass that can be dissolved in 1 L is:

0.070 mol x 152 g/mol = 10.64 g

Since 5.00 g is lesser than the maximum amount that can be dissolved (10.64 g), the added amount will be completely dissolved in 1 L of water at 25°C.

Answer:

e. HCOOH and NaCHOO

Explanation:

For a buffer solution, both an acid and its conjugate base are required.

With the information above in mind, we can discard options a) and c), as those combinations are not of an acid and its conjugate base.

Now it is a matter of comparing the pKa (found in literature tables) of the acids of the remaining three acids:

The acid with the pKa closest to the desired pH is HCOOH, so the correct answer is e. HCOOH and NaCHOO

Explanation:

For this question, we apply the equation: Q = mCp AT Where m is the mass of the substance, Cp

is its specific heat capacity and AT is the

temperature change. Q = 896 x 0.45 x (5-94)

Q = -35884.8 Joules

So about -36 kilojoules of heat is released.

mark as brainliest

Answer:

2.07459

Explanation:

this is the correct answer.

Answer:

Density and rigidity

Answer:2C4H10+2C12+12O2 4CO2+CC14+H20

Answer:

Danger

Explanation:

Answer:

By how many times would you expect Al2(SO4)3 to depress the F.P of water compared to sucrose C12H22011 ?.

Explanation:

The freezing point of a pure solvent decreases further by adding a nonvolatile solute.

This is called depression in freezing point.

When an ionic solute is dissolved then the depression in the freezing point is proportional to the number of ions present in the solution.

In aluminum sulfate, there are five ions formed as shown below:

[tex]Al_2(SO_4)_3(aq)->2Al^3^+(aq)+3SO_4^2^-(aq)[/tex]

But sucrose is a covalent compound and it does not undergo dissociation.

Hence, aluminum sulfate decreases the freezing point of water by five times compared to sucrose.

Explanation:

Answer:

Melting-point apparatus

Answer:

0.74 M

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 5.90 M

Volume of stock solution (V₁) = 0.250 L

Volume of diluted solution (V₂) = 2 L

Molarity of diluted solution (M₂) =?

The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:

M₁V₁ = M₂V₂

5.90 × 0.250 = M₂ × 2

1.475 = M₂ × 2

Divide both side by 2

M₂ = 1.475 / 2

M₂ = 0.74 M

Thus, the molarity of the diluted solution is 0.74 M

Answer:

88.9%

Explanation:

Primero convertimos 5.97 g de glucosa a moles, usando su masa molar:

Después calculamos la cantidad máxima de moles de CO₂ que se hubieran podido producir:

Ahora calculamos los moles de CO₂ producidos, usando los datos de recolección dados y la ecuación PV=nRT:

Finalmente calculamos el rendimiento porcentual:

Answer:

To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN

Explanation:

Dilution is the reduction of the concentration of a chemical in a solution and consists simply of adding more solvent.

In a dilution the amount of solute does not vary. But as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

In a solution it is fulfilled:

Ci* Vi = Cf* Vf

where:

In this case:

Replacing:

1.40 M* 20 mL= 0.088 M* Vf

Solving:

[tex]Vf=\frac{1.40 M* 20 mL}{0.088 M}[/tex]

Vf= 318.18 mL

To 318.18 mL would you need to dilute 20.0 mL of a 1.40 M solution of LiCN to make a 0.0880 M solution of LiCN

The Urms refers to the root mean square speed of the gas. The order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.

The Urms refers to the root mean square speed of the gas. This is ultimately dependent on the relative molecular mass of the gases when they are maintained at the same temperature.

Now, let us look at the order of increasing Urms for the gases shown in the question; NF3 < H2S < H2O < He.

Learnmore about Urms: https://brainly.com/question/365923

Answer:

The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.

The major use of sulfuric acid is in the production of fertilizers, e.g., superphosphate of lime and ammonium sulfate. It is widely used in the manufacture of chemicals, e.g., in making hydrochloric acid, nitric acid, sulfate salts, synthetic detergents, dyes and pigments, explosives, and drugs.

Answer:

Draw structures corresponding to the following IUPAC names:(a) (Z)-2-Ethyl-2-buten-1-ol (b) 3-Cyclohexen-1-ol(c) trans-3-Chlorocycloheptanol (d) 1,4-Pentanediol(e) 2,6-Dimethylphenol (f ) o-(2-Hydroxyethyl)phenol

Explanation:

According to IUPAC rules, the name of a compound is:

Prefix+root word+suffix

1) Select the longest carbon chain and it gives the root word.

2) The substituents give the prefix.

3) The functional group gives the secondary suffix and the type of carbon chain gives the primary suffix.

The structure of the given compounds are shown below:

Answer:

b. glass and charcoal

Explanation:

Step 1: Given data

Step 2: Determine which material will float in molten lead

Density is an intrinsic property of matter. Less dense materials float in more dense materials. The materials whose density is lower than that of lead and will therefore float on it are glass and charcoal.