Answer:
18,9g de hexano son necesarios
Explanation:
Basados en la ley de Raoult, la presión de vapor ejercida por una solución es:
P = P°*Xsolvente
Donde P es la presión de la solución deseada = 700mmHg, P° la presión de vapor de vapor del benceno = 1atm = 760mmHg y X es la fracción molar del solvente (Benceno).
Reemplazando:
700mm Hg = 760mmHg * X(Benceno)
0.9211 = X(Benceno)
La fracción molar de benceno se define como:
X = Moles benceno / Moles benceno + Moles hexano
Moles benceno -Masa molar: 78g/mol-
200g * (1mol/78g) = 2.5641 moles benceno
X = Moles benceno / Moles benceno + Moles hexano
0.9211 = 2.5641 moles benceno / 2.5641 moles benceno + Moles hexano
0.9211moles Hexano + 2.3618 = 2.5641
0.9211*Moles Hexano = 0.2023
Moles hexano = 0.2023/0.9211 = 0.2196 moles hexano.
Masa Hexano -Masa molar: 86g/mol-
0.2196 moles hexano * (86g/mol) =
18,9g de hexano son necesariosLa cantidad de hexano (C6H14) que se debe agregar a 200 g de benceno para permitir que la presión de vapor se convierta en 700 mm de Hg sería:
18.9 g
Usando la ley de Raoult, la presión de vapor que libera una solución se encuentra por:
P = P ° × X disolvente
Donde (P) denota la presión de la solución deseada
P ° denota la presión de vapor del benceno y
X denota la fracción molar del disolvente (benceno).
En el caso dado,
(P) = 700 mmHg,
P° = 1atm = 760mmHg
Fracción molar de benceno = 0,9211 (∵ 700/760)
La fracción molar de benceno (X) = Moles de benceno/Moles de benceno + Moles de hexano
Moles de benceno - Masa molar: 78g / mol - 200 g × (1 mol / 78 g)
= 2.5641 moles de benceno
X = Moles de benceno/Moles de benceno + Moles de hexano
0.9211 = 2.5641 moles Benceno/2.5641 moles Benceno + Moles de Hexano
⇒ 0,9211 × moles de Hexano + 2,3618 = 2,5641
⇒ 0.9211 × moles de Hexano = 0.2023
∵ Moles de Hexano = 0.2023/0.9211
[tex]= 0.2196 moles[/tex]
[tex]Hexane mass - Molar mass = 86g/mol - 0.2196 mole hexane[/tex] × [tex](86g/mole)[/tex]
[tex]= 18.9g[/tex]
Por tanto, 18,9 g es la respuesta correcta.
Learn more about "Benzene" here:
brainly.com/question/25798187
1. what is hard water.
2. Mention four sources of water.
3. write down the chemical formula of water.
4. What is purification of water.
5. Mention two importance of purification of water.
6. Mention 4 method used ot purify water. 7. Mention 4 impurities found in water.
8. Explain the term contaminated of water.
9. State two physical properties of water. 10. mention the names of of the elements that causes hardness in water.
Answer:
Oh man, the questions are much
Explanation:
1. Hard water is water what has high mineral content. (I can't go into details )
2. River, reservoir, Lake, groundwater, rain
3. H2O
4. POW is the process of removing undesirable chemicals, biological contaminants, suspended solids and gases from water.
5. Reduces amount of chlorine, soil residue, and organic and inorganic substances. Helps in improving the taste. Smell and visual appearance of water.
6. Boiling, filtration, distillation, and chlorination
7. Dust, dirt, harmful chemicals, biological contaminants, radiological contaminants
8. It is the contamination of water bodies, usually as a result of human activities, in such a manner that negatively affects it legitimate uses.
9. Colorless, turbidity, taste And odor.
10. Hardness of water is caused by compounds of calcium and magnesium, and by a variety of other metals.
if any 1 studying 11th can u plz send me the chemistry notes for chapter 2 STRUCTURE OF AN ATOM lesson
plz send me honestly cause i have exam day after tommorow .so plz send unwanted answer
I BEG U
Answer:
What
You cant just send notes you also have to say where you are and which book you are using because others are different
Which statement best describes the destiny of an atoms nucleus?
Answer:
The answer would be: An atom’s nucleus occupies very little of the atom’s volume but contains most of its mass
Explanation:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.
Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.
Refer to https://en.wikipedia.org/wiki/Atomic_nucleus for further understanding
what are two consents in this experiment
The number of cricket chirps
The temperature of each container
The kind of containers used
The number of crickets in each container
Answer:
the number of crickets in each container
Explanation:
to participate in the experiment you will have to know the crickets in the container
10. Fuel oil, gasoline, kerosene and naphtha are four fractions obtained from the fractional
distillation of petroleum.
What is the order of the boiling points of these fractions?
Answer:
option b
Explanation:
answer from gauth math
How many moles are there in 2.3 x 1024 atoms of
sulfur?
Explanation:
The steps given in the question are incorrect.
Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).
Step 1
Use dimensional analysis to convert the number of atoms to moles.
1 mole atoms = 6.022 × 10²³ atoms
n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag
Step 2
Convert the moles of Ag to mass.
mass (m) = moles (n) × molar mass (M)
n(Ag) = 3.8193 mol Ag
M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag
m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures
The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.
Answer:
[tex]\boxed {\boxed {\sf 3.8 \ moles \ of \ sulfur}}[/tex]
Explanation:
We are asked to convert a number of atoms to moles.
We can convert atoms to moles using Avogadro's Number, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of sulfur. There are 6.022 ×10²³ atoms of sulfur in 1 mole of sulfur.
We use dimensional analysis to convert atoms to moles. This involves setting up ratios. Use Avogadro's Number and the underlined information to make a ratio.
[tex]\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
We are converting 2.3 ×10²⁴ atoms of sulfur to moles, so we multiply by this value.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
Flip the ratio. It is equivalent, but it allows the units of atoms of sulfur to cancel.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {1 \ mol \ S}{6.022 \times 10^{23} \ atoms \ S}[/tex]
[tex]2.3 \times 10^{24} *\frac {1 \ mol \ S}{6.022 \times 10^{23} }[/tex]
[tex]\frac {2.3 \times 10^{24} }{6.022 \times 10^{23} } \ mol \ S[/tex]
[tex]3.819329127 \ mol \ S[/tex]
The original measurement of atoms (2.3 ×10²⁴) has 2 significant figures, so our answer must have the same. For the number we calculated that is the tenths place. The 1 in the hundredths place to the right (3.819329127) tells us to leave the 8 in the tenths place (3.819329127).
[tex]3.8 \ mol \ S[/tex]
2.3 ×10²⁴ atoms of sulfur is equal to approximately 3.8 moles of sulfur.
Which of the following structures in the human eye most likely functions in a way to help humans see clearly in different levels of light? A. The iris, or the colored portion of the eye
B. The white area
C. The eyelid
D. The pupil, or the dark portion at the center of the eye
D. the pupil or the dark portion at the center of the eye
3. Determine the pH value for calcium hydroxide, Ca(OH), with concentration of
0.05 mol dm3. [pH + pOH = 14).
Explanation:
Ca(OH) is a base
pOH = -Log[OH]
[OH] = 0.05
pOH = -Log(0.05)
pOH = 1.3
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 2
pH = 12.7
Which of the following results in a decrease in the entropy?
Heating ice
Increasing mass
Cooling a liquid
Dissolving salt in water
Answer:
cooling a liquid
Explanation:
Temperature is lowered and the energy of molecules, and therefore number of available configuration , is lowered
The thermal energy present in the system for the product formation is entropy. Cooling a liquid can decrease the entropy of the thermodynamic system. Thus, option C is correct.
What is entropy?Entropy is the energy and the heat present in the reactant of the thermodynamic system that is associated with the randomness and disorder of the particle matter in the reaction system.
Entropy is dependent on factors like dissolution, temperature, randomness, kinetic energy, etc. The entropy increases with an increase in the dissolution and tempearture.
The process of cooling liquid lowers the temperature which in turn decreases the kinetic energy and randomness of the molecules and at last, the entropy decreases.
Therefore, the cooling of the liquid decreases the entropy.
Learn more about entropy here:
https://brainly.com/question/28081833
#SPJ5
Chất tinh khiết là:
A. Có tính chất thay đổi
B. Có lẫn thêm vài chất khác
C. Gồm những phân tử đồng dạng
D. Không lẫn tạp chất
Answer:
The FitnessGram™ Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. [beep] A single lap should be completed each time you hear this sound. [ding] Remember to run in a straight line, and run as long as possible. The second time you fail to complete a lap before the sound, your test is over.
fd
How many Sodium (NA) Atoms are in Methylene?
Answer:
No Sodium(Na) in methylene
Explanation:
Methylene is an organic compound
Match each step of the scientific method with its matching example.
Match Term Definition
A) The growth of green algae is recorded every day for several weeks and compared
B) The data recorded in the experiment supports the hypothesis about how algae reproduce.
C) Based on what other scientists have done, algae life cycles are affected by light.
D) Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.
Experiment
Conclusion
Research
Analysis
Answer: I did the quiz and got it correct
Explanation:
Biosphere- B
Ecosystem- C
Biome- D
Habitat- A
Scientific Method
What is Scientific Method
A method or procedure that consists of systematic observation, measurement, and experiment, and the formulation, testing, and modification of hypotheses.
Experiment- The growth of green algae is recorded every day for several weeks and compared
Conclusion- Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.
Research-Based on what other scientists have done, algae life cycles are affected by light.
Analysis- The data recorded in the experiment supports the hypothesis about how algae reproduce.
For more information visit
https://brainly.com/question/497944
Which is the best term to use when describing the energy of motion? chemical kinetic potential thermal
Answer:
Kinetic energy
Explanation:
Kinetic energy is the energy associated with an object's motion. It is mass and velocity dependent by a directly proportional relationship.
Potential energy is the energy associated with an object's position.
Thermal energy is the energy associated with heat addition or withdrawal.
Kinetic energy is the energy that a body possesses because of its movement, that is, it is the energy that arises when objects are in motion.
What is kinetic energy?It is that energy that a body or system possesses due to its movement.The amount of work done by all the forces acting on a body with a given mass, depends on the said mass and the speed of the body.Therefore, we can conclude that kinetic energy is the energy produced by its movements that depends on its mass and speed.
Learn more about kinetic energy here: brainly.com/question/999862
Jane wants to study how a person's heart and lungs respond to intense
exercise. She measures the heart rate and breathing rate of 10 people before,
during, and after a 5K race. Which body systems is she studying?
A. Cardiovascular and respiratory
B. Skeletal and urinary
C. Digestive and nervous
D. Muscular and reproductive
SUBMIT
25.Which of the following reaction will not take place?
A. Zn+ FeSO4 → ZnSO4 + Fe
C. Fe + NiSO4 → FeSO4 + Ni
B. 2Al + 3MgSO4→ Al2(SO4)3 + 3Mg D.
Cu + 2AgNO3 → Cu(NO3)2 + 2Ag
Answer:
B
Explanation:
because Mg is stronger than Al
Magicians often use ‘flash powder’ in their acts. Flash powder contains 69.0% potassium chlorate (31.9% K, 28.9% Cl, 39.2% O) and the remainder is aluminium. Calculate the percentage composition by mass of each element in flash powder
Answer:
[tex]\rm K[/tex]: approximately [tex]22.0\%[/tex].
[tex]\rm Cl[/tex]: approximately [tex]19.9\%[/tex].
[tex]\rm O[/tex]: approximately [tex]27.0\%[/tex].
[tex]\rm Al[/tex]: [tex]31.0\%[/tex].
Explanation:
Consider a [tex]100\; \rm g[/tex] sample. There would be [tex]69.0\% \times 100\; \rm g = 69.0\; \rm g[/tex] of [tex]\rm KClO_{3}[/tex] and [tex]100.0\; \rm g - 69.0\; \rm g = 31.0\; \rm g[/tex] of [tex]\rm Al[/tex].
Out of that [tex]69.0\; \rm g[/tex] of [tex]\rm KClO_{3}[/tex]:
[tex]31.9\%[/tex] (by mass) would be [tex]\rm K[/tex]: [tex]31.9\% \times 69.0\; \rm g \approx 22.0\; \rm g[/tex].
[tex]28.9\%[/tex] (by mass) would be [tex]\rm Cl[/tex]: [tex]28.9\% \times 69.0\; \rm g \approx 19.9\; \rm g[/tex].
[tex]39.2\%[/tex] (by mass) would be [tex]\rm O[/tex]: [tex]39.2\% \times 69.0\; \rm g \approx 27.0\; \rm g[/tex].
Overall, the composition (by mass) of each element in this mixture would be:
[tex]\rm K[/tex]:
[tex]\begin{aligned} & \frac{31.9\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 31.9\% \times 69.0\% \\ \approx \; & 22.0\%\end{aligned}[/tex].
[tex]\rm Cl[/tex]:
[tex]\begin{aligned} & \frac{28.9\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 28.9\% \times 69.0\% \\ \approx \; & 19.9\%\end{aligned}[/tex].
[tex]\rm O[/tex]:
[tex]\begin{aligned} & \frac{39.2\% \times 69.0\; \rm g}{100\; \rm g} \\ =\; & 39.2\% \times 69.0\% \\ \approx \; & 27.0\%\end{aligned}[/tex].
[tex]\rm Al[/tex]:
[tex]\begin{aligned}& \frac{100\; \rm g - 69.0\; \rm g}{100\; \rm g} \\ =\; & 100\% - 69.0\% \\ =\; & 31.0\%\end{aligned}[/tex].
7.95x10 converted to the number is
7.95 × 10
= 79.5
This is the answer
In an exothermic reaction, heat is
released into the surroundings. How does this affect entropy?
particles in the surroundings move slower and have decreased entropy.
• B. The particles in the surroundings move faster and have increased entropy.
•C. The particles in the surroundings move
surroundings move slower and have increased entropy.
• D. The entropy is not affected by this.
Answer:
B. the particles in the surroundings move faster and have increased entropy
Explanation:
An exothermic process releases heat, causing the temperatures of the surroundings to increase. Entropy increases as temperature increases. Since an exothermic reaction releases heat to the surroundings, molecules in the surroundings will begin to move faster because they will absorb more energy, which increases their kinetic energy. An increase in temperatures means that the particles of the surroundings have greater kinetic energy. The faster moving particals have more disorder than particles that are moving more slowly at a lower temperature. Entropy is interpreted as the degree of disorder/randomness.
Làm thế nào để tắt mỗi chất ra khỏi hỗn hợp gồm bột nhôm bột sắt và bột gỗ?
Answer:
Dùng nam chân hút đc bột sắt ra khỏi hỗn hợp
Bột gỗ và bột nhôm thì bột gỗ tan trong nước còn bột nhôm thì không
Explanation:
Nice !to make 400 gram solution with a mass by a mass concentration of 6 % how much salt and water you need to mix
Answer:
[tex]400 \div 6 \\ \\ [/tex]
Volume = 90g / 3g cm3 What is the volume help ASAP
Answer:
The answer will be this 30g/cm3
What are the top three sources of US electricity generation?
The three major categories of energy for electricity generation are fossil fuels (coal, natural gas, and petroleum), nuclear energy, and renewable energy sources.
Define symbol and compound with an exomple.
Identify the correct mole ratio for each substance.
Sodium chloride (NaCl)
Na:Cl = 1: _
Ammonium nitrate(NH.NO3)
H:0 = 4: _
Answer:
The mole ratio of H : O in ammonium nitrate is 4 : 3.
Explanation:
We are given a compound named ammonium nitrate having formula
There are 3 elements in this compound which are nitrogen, hydrogen and oxygen.
To calculate the mole ratio, we write the ratio of their subscripts. For this compound,
Is it possible to prepare chlorine in lab without application of heat?
Answer:
i think it will explode
iron filings react with sulphuric acid to produce hydrogen and iron(II) sulphate
Answer:
is this true and false? then its true
Explanation:
Answer:
Fe(s) + H2SO4 (aq) ---> FeSO4 (s) + H2 (g)
Explanation:
The graph below shows how solubility changes with temperature.
A graph with the horizontal axis showing temperature ranging from 0 to 10 in units of 10 and the vertical axis solubility in grams of salt per 100 grams of water. Several compounds are shown. All data are approximate. The substances and their coordinates are as follows: upper N a upper C l: 0, 38; 10, 38; 20, 38; 30, 38; 40, 39; 50, 39; 60, 39; 70, 40; 80, 40; 90, 40; 100, 40. Upper N a subscript 2 upper H upper A s upper O subscript 4: 0, 5; 10, 18; 20, 28; 30, 39; 40, 49; 60, 65; 80, 82. Upper B a (upper N upper O subscript 3) subscript 2: 0, 5; 10, 8; 30, 12; 40, 15; 50, 18; 60, 20; 80, 28; 100, 33. Upper N a subscript 2 upper S upper O subscript 4: 0, 5; 5, 8; 10, 10; 15, 15; 20, 20; 25, 20; 28, 35; 30, 40; 32, 49; 33, 50; 35, 50; 40, 48; 50, 47; 60, 46; 70, 45; 80, 43; 90, 32; 100, 40. Upper C 3 subscript 2 (upper S upper O subscript 4) subscript 3 dot 9 upper H subscript 2 upper O: 0, 18; 20, 10; 30, 8; 50, 5; 60, 3; 80, 1; 100, 0.
How many grams of NaCl will be needed to form 600 mL of a saturated solution at 100°C?
15 g
24 g
40 g
240 g
answer 240g
The amount of NaCl required to prepare a 600 mL saturated solution depends on the solubility at the temperature.
What is solubility?Solubility is the amount of solute that dissolves in a given volume of solvent.
Solubility = amount of solute/volume of solvent oSolutions may be saturated, unsaturated, super saturated solution.
For solutes, the solubility increases with increase in temperature.
The amount of NaCl required to prepare a 600 mL saturated solution depends on the solubility at the temperature.
Learn more about solubility at: https://brainly.com/question/23946616
Answer:
240
Explanation:
Can Some One Please Help Me
Answer:
12 g
Explanation:
From the question given above, the following data were:
Number of atoms = 6.02×10²³ atoms
Mass of ₆C¹² =?
From Avogadro's hypothesis,
1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole of ₆C¹² also contains 6.02×10²³ atoms i.e
1 mole of ₆C¹² = 6.02×10²³ atoms
Recall
From the period,
1 mole of ₆C¹² = 12 g
Thus,
12 g of ₆C¹² = 6.02×10²³ atoms
Therefore, 12 g of ₆C¹² contains 6.02×10²³ atoms
need help asap!!!!!!!!!
Answer:
c. 2 and 3 only
Explanation:
When you compact the bag of trash you make it smaller, so the volume changes. And the density is the mass divided by the volume, so as the volume changed the density obligatorily change too
why is the Dna molecule able to open up and close?
Answer:
The breaking of the hydrogen bonds due to the force relieves the torsional stress stored in a double helix. As a result, the nucleotide strands rotate more freely about the axis of a helix and start unwinding. ... The DNA unzipping and the DNA unwinding result in a structural transformation from dsDNA to ssDNA.