Answer:
the acceleration of the rocket is: a=vemΔmΔt−g a = v e m Δ m Δ t − g .
Explanation:
I answered this before.
hope this helps! :)
Can u plz help me with my hw
Answer:
1) 4 x 25m = 100m
2) 0 because after 4 lengths, he's back at the starting block.
3) speed is distance over time so speed here is 100m/125s = 0.8m/s
4) ...
5) 100m / 1.25m/s = 80s
6.a) 100m / 0.5m/s = 200s
7.b) ... can't draw this now..
If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand
Explanation:
Hydrostatic pressure, P = hdg where d is density if the liquid ( water)
P= 150m × 1000kgm-3 × 10ms-2
P= 1.5 ×10^6 Pa
given. force of 88N and an acceleration of 4 m/s 2 what is the mass?
State a hypothesis about your estimated daily water use.
Answer
Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses.
Explanation:
I need help in question 7, a and b.
Answer:
The graph for 7a is shown in the attachment. For question 7b she walks a distance of 16 meters. (m)
Explanation:
An "energy bar" contains 26 ggof carbohydrates.How much energy is this in joules?
A 75.0 kg man pushes on a 500,000 kg wall for 250 s but it does not move.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The work done in the given case is 0
[tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]
For calculating the work done by an object we apply the formula, that is ~
[tex]f \times s \times \cos( \theta) [/tex]where f represents force applied, and s represents displacement.
but here, the displacement is zero since the wall didn't move at all, Therefore If we plug it's value as 0, we get
[tex]f = 0 \times s \times \cos( \theta) [/tex]hence,
[tex]work \: done = 0[/tex]So therefore, we can conclude that the man hasn't done any work.
Hope it helps.
Do comment if you have any query.
Calculate torque using angular momentum
Answer:
The equation net τ=ΔLΔt net τ = Δ L Δ t gives the relationship between torque and the angular momentum produced.
Suppose you were able to take measurements of current through the
resistor and voltage across the resistor. Your record of numerical values is written in a
tabular data below
Answer:
see attached
Explanation:
It will be easier to plot the data if you have grid lines to work with.
In the attached, we had to reverse the order of entries in the table, because the graphing program likes the independent variable listed first.
Which of the following is NOT true of a hotspot?
Given what we know about hotspots and their characteristics, we can confirm that the option that is false regarding hotspots is "A. Hotspots are constantly moving forming chains of volcanoes".
In regards to the study of geology, we refer to hotspots as spots in an oceanic mantle where magma located below causes them to become intensely hot. This heat forces magma and therefore the mantle itself upwards as a tectonic plate moves across the spot, and therefore results in the formation of volcanic chains. Some very popular examples of volcanoes and volcanic islands formed by this method include:
Yellowstone National ParkHawaiiThe country of IcelandDespite the other options being true, option A is false given that hotspots are stationary elements of the oceanic mantle. Although some scientists believe that there is evidence of the movement of hotspots, this movement is slow enough to not be taken into account.
This question was answered in regards to the complete question found online which states:
Which of the following is NOT TRUE about hotspots? a. Hotspots are constantly moving forming chains of volcanoes.
b. Hotspots are stationary.
c. Hotspots form volcanic island arcs
d. Hotspots lie along an oceanic plate
To learn more visit:
https://brainly.com/question/264008?referrer=searchResults
I'll give brainliest
Answer: figuratively speaking both the lines for the force Q and force P is equal.
if you have 3 moles of iron, how many grams of iron do you have?
Answer:
55.84 look at periodic table
so 55.84*3= 167.52gFe
How fast is an object going if it travels from San Diego to Anaheim in 1.25 hours (hr)? The distance from San Diego to Anaheim is 93 miles (mi).
a) 74.4 mi/hr
b) 116.25 mi/hr
c) 0.013 mi/hr
d) 84.25 mi/hr
e) None of the answers
Answer:
74.4 mph
Explanation:
Since we have the distance in miles and the time it took in hours, we can divide the two to get miles per hour.
speed = mi/hr
speed = 93/1.25
speed = 74.4 mph
You throw a can of cranberry sauce straight up in the air with an initial velocity of 12 m/s. What is the maximum height the baseball reaches above your head.
Answer:
Δx=7.35m
Explanation:
This is a free fall problem (g= -9.8 m/s²).
Displacement: ? <--- what you're trying to find (max height)
Initial Velocity: 12 m/s
Final Velocity: 0 m/s <-- since the can will land back in your hands
Time: Missing <-- not needed to solve
Acceleration: -9.8 m/s²
The equation that you will use is vf²=vi²+2aΔx
Now plug the information into the equation!
(0m/s)²=(12m/s)²+2(-9.8m/s²)Δx
Multiply the 2 with the acceleration (-9.8m/s²)
(0m/s)²=(12m/s)²-19.6m/s²Δx
Now you need to square the final and initial velocity
0m/s=144m/s-19.6m/s²Δx
Move 144 to the other side of the equal sign
-144m/s=-19.6m/s²Δx
Divide both sides by -19.6m/s²
7.346m=Δx
You can round it to the tenth or hundreth place, up to you!
For this example, I'll round to the hundredth...
Δx=7.35m
I would double check this answer or review it yourself to see if it's correct.
Good luck with your studies!
what is Secular Music's instrument's?
Answer:
Drums, harps, recorders, and bagpipes.
Explanation:
What quantity is represented by the mass number minus the atomic number?.
Answer:
Mass = mass of nucleus
Atomic Number = number of protons (charge) of nucleus
Mass - Atomic Number = number of neutrons
A catamaran with a mass of 5.44×10^3 kg is moving at 12 knots. How much work is required to increase the speed to 16 knots? (One knot = 0.51 m/s.)
show all steps
The work that is required to increase the speed to 16 knots is 14,176.47 Joules
If a catamaran with a mass of 5.44×10^3 kg is moving at 12 knots, hence;
5.44×10^3 kg = 12 knots
For an increased speed to 16knots, we will have:
x = 16knots
Divide both expressions
[tex]\frac{5.44 \times 10^3}{x} = \frac{12}{16}\\12x = 16 \times 5.44 \times 10^3\\x = 7.23\times 10^3kg\\[/tex]
To get the required work done, we will divide the mass by the speed of one knot to have:
[tex]w=\frac{7230}{0.51}\\w= 14,176.47Joules[/tex]
Hence the work that is required to increase the speed to 16 knots is 14,176.47 Joules
Learn more here: https://brainly.com/question/25573786
when light enters water, it bends. what does the amount of bending depend on?
Answer:
the change of speed!
Explanation:
if light speeds up or slow down more it bend more
What symbols are these?
Answer:
the bottom one is wollsiegel
. Quỹ đạo chuyển động của một vật là
Answer:
you are very kind Po lang
how have astronomers interpreted the unexpectedly fast rotation of galaxies
Answer:
There must be a lot of dark matter that can be felt but not seen
The astronomers interpreted the unexpectedly fast rotation of galaxies that there must be a large quantity of dark energy whose gravity is detectable yet invisible.
What is a galaxy?Any system of stars plus interstellar material that makes up the cosmos is referred to as a galaxy. Such assemblages are common, and many of them are so massive that they hold tens of trillions of stars.
A vast variety of galaxies, from dim, hazy dwarf objects to spectacular spiral-shaped giants, have been created by nature. Almost all galaxies seem to have formed shortly after the universe started, and they are everywhere in space, even at the farthest limits of the universe that can be seen by the most advanced telescopes.
The majority of galaxies are found in clusters, many of which are further organized into clusters that span hundreds of billions of light-years.
Since there are almost empty spaces between these so-called super clusters, the universe's overall structure resembles a network of sheets or chains of galaxies.
To know more about Galaxy:
https://brainly.com/question/2905713
#SPJ12
A bob attached to a string of length L = 1.25 m, initially found at the equilibrium
position, is given an initial velocity v = 0.8 m/s. The maximum displacement angle,
Omax, is: (Take g=10 m/s)
17
3.2
13
10.2
6.4
Clear selection
A hoh attached to a string of length 2 m is displaced by an angle of 8º and then
The maximum displacement angle of the bob is 13⁰.
The given parameters;
Length of the pendulum, L = 1.25 mInitial velocity of the bob, v = 0.8 m/sThe maximum displacement of the bob is calculated by applying the principle of conservation of energy;
[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{0.8^2}{2\times 10} \\\\h = 0.032 \ m[/tex]
The maximum displacement angle is calculated as follows;
[tex]cos \theta = \frac{L-h}{L} \\\\cos \theta = \frac{1.25 - 0.032}{1.25} \\\\\cos \theta = \frac{1.218}{1.25} \\\\cos \theta = 0.9744\\\\\theta = cos^{-1}(0.9744)\\\\\theta = 13\ ^0[/tex]
Thus, the maximum displacement angle of the bob is 13⁰.
Learn more here:https://brainly.com/question/13981780
7. A bus covers a certain distance in 60 minutes if it runs at a speed of 60 km/hr.
What must be the speed of the bus in order to reduce the time of journey by 40
minutes?
Answer:
90 Km/h
Explanation:
60 mins is 1 hr
so in an hour bus covers 60 Km
so new speed:
d/t
(60km/40mins)*60mins/h
90Km/h
Scientists are experimenting with a kind of gun that may eventually be used to fire payloads directly into orbit. In one test, this gun accelerates a 5.6-kg projectile from rest to a speed of 3.5 × 103 m/s. The net force accelerating the projectile is 2.5 × 105 N. How much time is required for the projectile to come up to speed?
Answer:
7.84 s
Explanation:
Ok, one step at a time. We know the mass of the projectile, we know the force. Acceleration is easily obtained from Newton second law:
[tex]\vec F = m\vec a[/tex][tex]2.5\times 10^5 = 5.6a \rightarrow a = (2.5/5.6) \times 10^5 = 4.46 \times 10^4 ms^-^2[/tex].
At this point, we know the acceleration, we know initial and final velocity, we can time the ammount of time it took to get there.
[tex]v= v_0 +at \rightarrow 3.5\times10^3 = 0 + 4.46\times10^4 t\\t= \frac{3.5\times10^3}{4.46\times10^4} = 7.84 s[/tex]
The mercury in a barometer of a cross-sectional area 1 cm² stands at 75 cm, and the space above it is 9 cm in length. What
volume of air, measured at 3. The mercury in a barometer of a cross-sectional area 1 cm² stands at 75 cm, and the space above it is 9 cm in length. What
volume of air, measured at atmospheric pressure, would have to be admitted into the space to cause the column of the mercury
to drop to 59 cm?
The ideal gas equation and the pressure in barometer allows us to find the amount of air that we must introduce into the barometer for the change in height of the mercury column is:
The variation of the volume is: ΔV = 7.67 cm³
Pressure is defined by the relationship between force and area.
P = F / A
The ideal gas equation establishes a relationship between pressure, volume, and temperature of an ideal gas.
PV = nR T
Where P is pressure, V is volume, and T is temperature.
Let's write this equation for two points assuming that the temperature has not changed.
P₀ V₀ = P₁ V₁
V₁ = [tex]\frac{P_o}{P_1} \ V_o[/tex] (1)
The subscript "o" is used for the start point and the subscript "1" for the end point.
The pressure in a barometer is:
P = ρ g y
They indicate the initial height of the barometer y₀=75 cm, the distance from empty space y'₀ = 9 cm and the final height of the barometer y₁ = 59 cm.
The volume of the cylinder is
V = π r² y
Let's calculate the initial volume.
V₀ = π 1 9
V₀ = 28.27 cm³
We substitute in equation 1.
V₁ = [tex]\frac{\rho \ g \ y_o}{\rho \ g \ y_1} \ V_o[/tex]
V₁ = [tex]\frac{y_o}{y_1} \ V_o[/tex]
Let's calculate.
V₁ = [tex]\frac{75}{59} \ 27.27[/tex]
V₁ = 35.94 cm³
The volume to be incremented is
ΔV = V₁ - V₀
ΔV = 35.94 - 28.27
ΔV = 7.67 cm³
Using the ideal gas equation and the pressure in barometer we can find the amount of air that we must introduce into the barometer for the change in height of the mercury column is:
The change of the volume is: ΔV = 7.67 cm³
Learn more here: brainly.com/question/17254541
A transformer is being built to triple the voltage produced. Which data are collected to investigate whether the transformer can achieve the goal? (1 point)
A) the ratio of the number of turns in the primary and secondary coils
B) only the number of turns in the secondary coil and the magnetic field of the core
C) only the number of turns in the primary coil and the magnetic field of the core
D) the ratio of the number of turns in the primary and secondary coils and the magnetic field of the core
Answer:
the ratio of the number of turns in the primary and secondary coils.
Explanation:
hope i'm not too late!!
how do i do this question in science?
simple subtract and ummmmmm.....
Se aplican dos fuerzas concurrentes a un objeto de 4N a la derecha y 5N a la izquierda. ¿Hacia donde se movió y con cuanta fuerza?
The forces move strongly towards the left by 1N
Given the following
Force towards the right = 4N
Force towards the left = 5N
Note that the force acting towards the left is negative, hence the force acting towards the left is -5N
Take the sum of force
Resultant force = -5N + 4N
Resultant force = -1N
This shows that the forces move strongly towards the left by 1N
Learn more here: https://brainly.com/question/24629099
Without friction, what is the mass of an ball accelerating at 1.8 m/sec2 to which an
an unbalanced force of 42 Newtons has been applied?
A 75.60 kg
B 00.04 kg
C 23.33 kg
D 43.80 kg
Answer:
23.33 kgExplanation:
The mass of the object can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{42}{1.8} = 23.3333... \\ [/tex]
We have the final answer as
23.33 kgHope this helps you
Answer:
[tex]\boxed {\boxed {\sf C. \ 23.33 \ kg}}[/tex]
Explanation:
According to Newton's Second Law of Motion, force is the product of mass and acceleration.
[tex]F=ma[/tex]
The mass of the ball is unknown. The ball is accelerating at 1.8 meters per second squared. An unbalanced force of 42 Newtons is applied to the ball.
Convert the units of force. 1 Newton is equal to 1 kilogram meter per second squared, so our answer of 42 Newtons is equal to 42 kg*m/s².
F= 42 kg*m/s² a= 1.8 m/s²Substitute the values into the formula.
[tex]42 \ kg*m/s^1 = m * 1.8 \ m/s^2[/tex]
We are solving for the mass, so we must isolate the variable m. It is being multiplied by 1.8 meters per second squared. The inverse operation of multiplication is division. Divide both sides by 1.8 m/s².
[tex]\frac {42 \ kg*m/s^2}{1.8 \ m/s^2} = \frac{a*1.8 \ m/s^2}{1.8 \ m/s^2}[/tex]
[tex]\frac {42 \ kg*m/s^2}{1.8 \ m/s^2} =m[/tex]
The units of meters per second squared cancel.
[tex]\frac {42 \ kg}{1.8 } =m[/tex]
[tex]23.3333333 \ kg=m[/tex]
Round to the hundredth place. The 3 in the thousandth place tells us to leave the 3 in the hundredth place.
[tex]23.33 \ kg \approx m[/tex]
The mass of the ball is approximately 23.33 kilograms.
lonic Naming Practice
Write the name of the following chemical compound:
Na3Cl1
Answer:
sodium chloride. .....