The peak power consumption, maximum current, and minimum current are all equal to 0.83A.
How to fix?Ohm's law states that P = I x V and that I = P/V,
which means that, using different values,
I = 100/120 = 0.83A.
How do I figure out how much light there is?By dividing the wattage by the voltage, one may easily calculate the amps. Therefore, if the lighting fixture you are working with has a wattage of 60 and a voltage of 12, you would divide 60 by 12 to get five, which is the amps.
What is the current recipe?The letter I is used to represent current. According to Ohm's equation, V = IR, the current flowing through a conductor is proportional to the voltage V and resistance R.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ4
Hydroelectric systems generate electricity using the energy of falling water. A pumped storage hydroelectric system can also be used as a way of storing energy for future use. Explain how
It is obvious that In the pumped storage method, a pumped water is stored in a reservoir using unique pumps. Electric pumps consume electric power, however, and so the logic of the pumped storage methods seems poor but this is not so. Water is usually pumped during off-peak hours of power consumption. An essential reason for the pumped storage method is water-level control to make sure that the power station operates at all means or indefinitely. This reason reflects the economics of power generation as well.
what is hydroelectric system?
hydroelectric is a renewable energy also known as hydroelectric power,( hydropower), electricity that is produced from generators driven by turbines that convert the potential energy of falling or flowing water into mechanical energy.
learn more about hydroelectric system here;
brainly.com/question/2321474
#SPJ1
a point at an antinode of the standing wave on the wire travels from its maximum upward displacement to its maximum downward displacement in 8.40 msms . what is the wire'??s mass?
The relation between the time-period of the transverse wave for the third harmonic and the time between the maximum displacement and minimum displacement is [tex]=16.3 \mathrm{~g}[/tex]
[tex]$$T_3=2 t$$Substitute$8.40 \mathrm{~ms}$[/tex]
for t in the above expression.
[tex]$$T_3=2(8.4 \mathrm{~ms})\left(\frac{10^{-3} \mathrm{~s}}{1 \mathrm{~ms}}\right)$$[/tex]
The wave velocity can be given by the following expression [tex]=0.0168 \mathrm{~s}[/tex]
[tex]v=\frac{\lambda_3}{T_3}[/tex]
Here,
[tex]$$\lambda_3$$[/tex]
is the frequency of third harmonics and
[tex]$$T_3$$[/tex]
is the time-period of third harmonics.
Substitute [tex]$0.1296 \mathrm{~m}$[/tex] for
[tex]$$\lambda_3$$[/tex]
and
[tex]$0.0168 \mathrm{~s}$ for$T_3$[/tex]
[tex]\begin{aligned}& v=\frac{0.1296 \mathrm{~m}}{0.0168 \mathrm{~m}} \\& =7.714 \mathrm{~m} / \mathrm{s}\end{aligned}[/tex]
The expression of the wave velocity is given by the following expression.
[tex]v=\sqrt{\frac{T}{m / L}}[/tex]
Rearrange the above expression for
[tex]$$m$$[/tex]
[tex]\text { Substitute } 5.00 \mathrm{~N} \text { for } T, 0.1944 \mathrm{~m} \text { for } L \text {, and } 7.714 \mathrm{~m} / \mathrm{s} \text { for } v \text { in the above expression. }[/tex]
[tex]\begin{gathered}m=\frac{(5.00 \mathrm{~N})(0.1944 \mathrm{~m})}{(7.714 \mathrm{~m} / \mathrm{s})^2} \\=(0.0163345 \mathrm{~kg})\left(\frac{1000 \mathrm{~g}}{1 \mathrm{~kg}}\right) \\=16.3 \mathrm{~g}\end{gathered}[/tex]
The anti-nodes in the standing waves are at a distance half a wavelength. The time-period is twice the time from maximum displacement to minimum displacement of the anti-node.
To learn more about displacement visit
https://brainly.com/question/11934397
#SPJ4
a 40cm diameter wheel accelerates uniformly from 240 rpm to 360 rpm in 6.5 seconds. how far will a point on the edge of the wheel have traveled in this time
Answer:
S = V1 t + 1/2 a t^2 distance traveled for linear acceleration
θ = ω1 t + 1/2 α t^2 equivalent angle for rotational acceleration
ω1 = 240 / min * 2 π * 240 / (60 s/min) = 8 π / s
ω2 = 360 rpm = 12 π / s
α = 4 π/ 6.5 s^2 = .62 π / s^2 angular acceleration
θ = 8 π / s 6.5 s + .62 π / 2 * 6.5^2
θ = 52 π + 13 π = 65 π = 65 * π / (2 π / rev) = 32.5 rev
1 rev = 2 * π * R = 2 * π * .4 m = 2.51 m / rev
S = 32.5 rev * 2.5 m/rev = 81 m
it would take approximately years to receive light from a civilization on the opposite side of the galaxy. a. 100000 years. b. 10 yrs. c. 100 yrs. d. 1/4 of a year.
It would take approximately 100,000 years to receive light from a civilization on the opposite side of the galaxy. The correct answer is, therefore (a) "100,000 years".
This is because the distance between the Earth and the opposite side of the galaxy is approximately 100,000 light-years. Light travels at a speed of approximately 300,000,000 meters per second, so it would take approximately 100,000 years for light to travel from the opposite side of the galaxy to the Earth.
A light-year is a unit of distance that is equal to the distance that light travels in one year. Light travels at a very high speed, approximately 300,000,000 meters per second, so it is able to cover a large distance in a relatively short amount of time.
Learn more about Speed of Light here:
https://brainly.com/question/104425
#SPJ4
when you measure the average kinetic energy in a substance, you are measuring its
A substance's temperature is defined as its average kinetic energy across all of its atoms or molecules. A substance's constituent particles do not all possess the same kinetic energy.
What average kinetic energy in a substance?A thermometer is the device used to calculate the average kinetic energy of a material. Despite the fact that we occasionally conflate the terms heat and temperature, in science these are two distinct forms of energy.
Therefore, Temperature is the kinetic energy of the molecules in a substance, whereas heat is thermal energy.
Learn more about average kinetic here:
https://brainly.com/question/28702344
#SPJ1
Question 8 of 10
Based on the diagram, which statement explains how energy is conserved
during this chemical reaction?
A
Potential energy
of a system
I
1
I
1
Reaction progress
B
C
OA. The potential energy lost by the reaction system (C) is gained by
the surroundings.
B. The potential energy changes indicated by A and B involve energy
lost by the surroundings.
OC. The potential energy gained by the reaction system (A) is lost from
the surroundings.
OD. The potential energy lost during the formation of products (B) is
lost by the surroundings.
Jy
SUBMIT
The statement that explains how energy is conserved during this chemical reaction is " The potential energy lost by the reaction system (C) is gained by the surroundings".
option A is the correct answer.
What is law of conservation of energy?
The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
Based on the law of conservation of energy, the potential energy of a system can be converted into kinetic energy or heat energy gained by the surrounding.
ΔP.E = ΔH
Pf - Pi = C
where;
Pf is the final potential energyPi is the initial potential energyC is the energy gain by the surroundingLearn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
a baseball is thrown by a pitcher at 95 mph through standard air. the diameter of the baseball is 2.82 in. estimate the drag force on the baseball
The baseball's drag force, FD, is equal to 0.4995 Jlb. The baseball has a 2.82-inch diameter.
What does a force mean in science?In physics, the word "force" appears to have a clear definition. A force does not "be in it" or "be contained by" an object. A force from another can exert pressure on something.
What do force and motion mean?In essence, force is a push or pull that has an impact on anything or energy as a feature of physical motion or movement. It happens when two things get in touch. In addition, while a body is moving, it is considered to be in motion.
To know more about Force visit:
https://brainly.com/question/13191643
#SPJ4
Classify the type of reaction below.
C2H6 + O2
--> CO2 + H2O
a. Synthesis
b. Decomposition
c. Combustion
d. Single Replacement
e. Double Replacement
Answer: Synthesis
Explanation: You are combining multiple Elements
FILL IN THE BLANKS
13) A student walks 20 m north, 10 m south, and 3 m north. To have a displacement of 0 m,
the student should walk _____m toward the _____.
Answer:
13) A student walks 20 m north, 10 m south, and 3 m north. To have a displacement of 0 m, the student should walk 13m toward the south.
Answer:
13 m towards the south
Explanation:
First, the student walks 20m North.
Then the student walks 10m South. This means that the student is now (20 - 10 m) north = 10m North
Now the student walks 3m North
Therefore the student is now ( 10 + 3m) north
= 13m North.
To return to starting position, the person should walk 13m south.
Submit your data table below and answer the following questions:
1. What did you notice about the angle of Incidence and the angle of reflection?
2. Do you believe this relationship between Incident and reflected angles would occur even if the medium Interface
were curved, like a curved mirror?
Justify your responses.
When a light ray is hit into a flat mirror the angle of incidence is equal to angle of reflection. But if the mirror is curved, this relation is not satisfied and the angle of reflection changes.
What is law reflection ?When a light ray is hot on a mirror a line that is perpendicular to the mirror's surface can be drawn at the point of incidence where the ray contacts the mirror.
A typical line is what this line is. The angle formed by the incident and reflected rays is split into two equal angles by the normal line. The angle of incidence is the angle formed by the incident beam and the normal. The angle of reflection is the angle formed by the reflected beam and the normal.
According to the law of reflection, the angle of incidence and the angle of reflection are identical whenever a light beam reflects off a surface. However, for a curved mirror these two angles will be different.
Find more on reflection law :
https://brainly.com/question/15655610
#SPJ1
_____ associated by microscopic comparison are examined by the FBI’s _____ Unit.
A.
Hairs, Mitochondrial DNA
B.
Rock samples, Anthropology
C.
Fibers, Mineralogy
D.
Skeletal remains, Fabrics
The FBI's Mitochondrial DNA Unit looks at hairs connected by microscopic comparison.
What is quantity and unit?Quantity: A measurable quality, such as mass, length, time, volume, or pressure. Unit: A reference unit used to measure other quantities. Chemists use a variety of measurements. if 6.0 grams of a substance's bulk were discovered.
What are 3 types of units?These are the three basic units: Mass: The body's mass is used to calculate how much matter it contains. The kilogram, or Kg, seems to be the basic unit of mass. Time is a quantifiable length of time. Seconds (s) are the fundamentally important unit of time. The length separating an object's two ends is known as its length.
To know more about unit visit:
brainly.com/question/1220936
#SPJ1
Forensic scientists immerse glass evidence into a medium to determine its refractive index. Which medium is usually used for determining the refractive
index?
A. water
B. air
C. oil
D. gel
The refractive index is typically determined in a vacuum medium.
In what kind of medium is the refractive index normally calculated?A refractometer is the tool used to measure refractive index (RI). A refractometer is frequently used to determine the refractive index of liquid samples. It does this by measuring how much light is bent when it enters the sample from the air.
How do forensic scientists use refractive index?In forensic laboratories, measuring refractive index is a common way to look into glass microtraces. The technique's cost-effectiveness and reproducibility are advantages, but it also works well for analyzing minute fragments.
To know more about refractive visit:-
https://brainly.com/question/14760207
#SPJ1
after i stops my lexus engine, the warning sign appears when open door, but off when close the door, why?
Your door-ajar light may turn on for a variety of reasons depending on the type of vehicle you drive: a dome light short in terms of electricity. The anti-theft system experienced an electrical short. a door switch that was stuck to the "open" setting.
The effects that an electrical short has.Appliance damage, electrical shock, or even a fire may result from a short circuit. And if you don't take any steps to prevent short circuits, the likelihood that these events will occur will only rise.
An electrical short, also known as a short circuit, is a low-resistance connection between two conductors, which are components allowing electricity to flow through them. A short happens when a current takes an unintended detour instead of taking the intended path.
To know more about electrical short visit:
https://brainly.com/question/29109199
#SPJ4
the newly joined elephant member blames the lack of success of the band on the numbers of bits used in sampling the data. a recent publication about bulls and cows and their origin on nearby planets suggests that elephants of one gender are extremely sensitive to small changes in sound amplitude - as opposed to elephants of the opposite gender. if, as the publication claims, those elephants are capable of noticing a 1:297,921 change in sound amplitude then how many bits should be used in the recording per data sample to reproduce this effect?
Elephants communicate over vast distances using infrasound and seismic waves in addition to touch, sight, smell, and sound. Elephants have been compared to primates and cetaceans in terms of intelligence.
Elephants can expand their nostrils by over 30%, expanding the nasal volume by 64%, and inhaling at a rate of more than 150 m/s (490 ft/s), which is around 30 times faster than a human sneeze. Males When they reach adolescence, elephants leave their family groups and may live alone or with other guys. When searching for a mate, adult bulls typically interact with family units. They experience musty, a state of elevated testosterone and hostility that aids in both dominance over other males and successful reproduction. Calves depend on their moms for up to three years and are the center of attention in their family groupings. Elephants in the wild have a lifespan of up to 70 years.As a result of the sound continuing to reflect off the numerous surfaces in a reflecting environment, the sound in that space continues to exist even after the sound production has stopped. The amount of time (measured in seconds) it takes for the volume of a reverberant or reflected sound to diminish by a particular amount is known as the reverberation time.
To know more about elephants
https://brainly.com/question/21094933
#SPJ4
when you looked at solar activity on the heliophysics event registry website, on which date did you find activity on the sun?
You did look at solar activity on the heliophysics event registry website, and we found activity on the sun on the specified day.
What three sorts of solar occurrences are there?Any natural occurrence in the upper atmosphere of the sun is referred to as a solar phenomenon. Solar flares, prominences and filaments, and coronal mass ejections are three different categories of solar phenomena.
How can I follow the cycle of solar activity the best?The simplest way we can investigate how solar activity changes over time is to survey sunspots, which is also how we track the solar cycle. Sunspots are associated with the Sun's natural 11-year cycle, during which the planet's surface changes from calm to turbulent.
To know more about solar activity visit:-
https://brainly.com/question/3013261
#SPJ4
Kendell's mom buys him a new bowling ball that has a mass of 4 kg. He rolls the ball with an average speed of
30 m/s. What is the average kinetic energy of Kendell's ball when rolling?
Answer:
1800J
Explanation:
E = ½mv²
E = ½(4)(30)²
E = 2 x 900
E = 1800J
a 97.5 kg bungee jumper jumps off a bridge and undergoes simple harmonic motion. if the period of oscillation is 11.2 s, what is the spring constant of the bungee cord?
According to the given statement 4.88 N/m is the spring constant of the bungee cord.
What is the spring constant k?The spring stiffness is quantified by the spring constant, or k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the bigger the spring constant. K stands for the proportionality constant, commonly referred to as the "spring constant." The k variable in Hooke's law (F = -kx) represents stiffness and strength in simple words.
Briefing:Mass m= 97.5 kg
period T= 11.2s
The period expression is provided as
T=2π√m/k
Substitute
11.2= 2*3.142*√97.5/k
square both sides
11.2^2= 2*3.142*97.5/k
125.44= 612.69/k
k=612.69/125.44
k= 4.88 N/m
To know more about Spring Constant visit:
https://brainly.com/question/14159361
#SPJ4
Find the y-component of this
vector:
42.2°
101 m
Remember, angles are measured from
the +x axis.
Y-component (m)
The y-component of the given vector is 67.84 m.
What is a vector quantity?The quantities that exhibit both magnitude and direction can be defined as vector quantities. For example, a boy is riding a cycle with a velocity of 30 km/hr in a southeast direction. Then to define the velocity, we require two things which are the magnitude of the velocity and the direction. Therefore, it expresses a vector quantity.
The components of the vector can be represented as:
x = r cosθ
y = r sinθ
Given the value of r, = 101 m
The angle, θ = 42.2°
The y-component of this vector can be calculated as:
y = 101 ×sin 42.2°
y = 67.84 m
Learn more about vectors, here:
https://brainly.com/question/24327456
#SPJ1
Does the addition od 5N forces always give a 10 N force?
.An object has a mass of 10 kg and an acceleration of 20 m/s2. What is the force on the object?
The force acting on the object is 200 Newton.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
Given that mass of the object: m = 10 kg.
acceleration of the object = 20 m/s^2.
Hence, according to Newton's 2nd law of motion:
Force = mass × acceleration
= 10 × 20 Newton
= 200 Newton.
Hence, the force on the object is 200 Newton.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
3. You drive on NH-4 from New Delhi to Agra, half the time at 55 km/h and the other half at 90 km/h. On the way back you travel half the distance at 55 km/h and the other half at 90 km/h. What is your average speed (a) from New Delhi to Agra, (b) from Agra to New Delhi, (c) for the entire trip? (d) What is your average velocity for the entire trip?
Answer:
below
Explanation:
d = distance from ND to A
Average speed = total d / total time
a) total distance = d
= 1/2 t * 55 + 1/2 t * 90 total time = t
average speed = d / t = (1/2 t *55 + 1/2 t*90) / t
= 1/2 *55 + 1/2 * 90 = 72.5 km/hr av
b) time at 55 = 1/2d /55 time at 90 = 1/2 d 90
rate = d / t = d /( 1/2 d 55 + 1/2 d 90) = 1 / ( 1/110 + 1/180) = 68.3 avg
c) and d) are the same question?
total d /total time = avg 2d /( d / 72.5 + d/ 68.3) = 70.3 km/hr
if we have a system that uses 5 volts with a frequency of 1ghz and the power used is 3 watts, what is the power draw when we increase the frequency to 3ghz?
Processor-A uses 20 W of power components and 80 W cpu dynamic power 3 GHz.
Static power: What does that mean?When there is no design activity occurring, static power—also known as "leakage"—is used up. It closely relates to the transistor's idle current, which is based on the transistor's characteristics.
Power is it static or is it dynamic?While leakage, or the current that passes through a transistor while there is no activity, makes up static power, switching or short-circuit power are components of dynamic power. Any of the following things may influence each power component's value: Activity. Frequency.
To know more about static power visit:
https://brainly.com/question/26609519
#SPJ4
1. A car moving 11 m/s accelerates at 1.5 m/s². How fast is it moving after it accelerates for 50
seconds?
Type a response (show work please)
We may be aware that, for example, a car leaving a stop sign would move farther in a given amount of time the faster it accelerates.
what an acceleration is?acceleration is the rate of change in both speed of velocity over time. When anything moves faster or slower in a straight line, it is said to have been accelerated. So because direction is always shifting, motion on a circle accelerates even while the speed is constant.
What prompts accelerating?An object's velocity is altered by a net force, and acceleration increases with net force. To accelerate at the same rate as less massive objects, more massive objects need greater net forces.
To know more about acceleration visit:
https://brainly.com/question/2303856
#SPJ1
a positive charge is moving to the right and experiences an upward magnetic force. in which direction must the magnetic field have a component?
The rightward motion of a positive charge is accompanied by an upward magnetic pull. There must be a component of the magnetic field that enters the page.
How does magnetic force work?The total force operating on an electric charge can be expressed as the sum of the electric force and the magnetic force acting on the object if a point charge q is placed in the presence of both a magnetic field of magnitude B (r) and an electric field of magnitude E (r).
How does a magnetic field respond to an electric current?Electric Field A magnetic field forms around a wire when an electric current flows through it. The magnetic field also creates a ring of concentric circles around the wire.
To learn more about magnetic field visit:
brainly.com/question/23096032
#SPJ4
a 7.0-g bullet is fired into a 1.5-kg ballistic pendulum. the bullet emerges from the block with a speed of 200 m/s, and the block rises to a maximum height of 12 cm. find the initial speed of the bullet. (please do not include units in your answer)
The initial speed of the bullet is 200 m/s.
What is Conservation of momentum?Conservation of momentum is a law of physics which states that the total momentum of a system remains constant over time. This means that when two or more objects interact, the total momentum of the system remains the same before and after the interaction. The law of conservation of momentum is applicable to both isolated systems and systems that interact with external forces. It is an important concept in a variety of applications ranging from collisions of particles to the motion of galaxies. Conservation of momentum also plays an important role in the field of quantum mechanics.
The initial speed of the bullet can be calculated using the conservation of momentum equation:
m₁v₁ + m₂v₂ = m₁v′₁ + m₂v′₂
where m₁ is the mass of the bullet, v₁ is the initial speed of the bullet, m₂ is the mass of the pendulum, v₂ is the initial speed of the pendulum, v′₁ is the final speed of the bullet, and v′₂ is the final speed of the pendulum.
In this problem, m₁ = 7.0 g, v₁ = ?, m₂ = 1.5 kg, v₂ = 0 m/s, v′₁ = 200 m/s, and v′₁ = 0 m/s.
Substituting this into the equation, we get:
7.0 g x v₁ + (1.5 kg)(0 m/s) = 7.0 g(200 m/s) + (1.5 kg)(0 m/s)
Solving for v₁, we get:
v₁ = 200 m/s
Therefore, the initial speed of the bullet is 200 m/s.
To learn more about initial speed
https://brainly.com/question/24739297
#SPJ4
disregarding friction, how far will the cart move in 3.2 s, starting from rest? answer in units of m.
If the cart moves in 3.2 seconds from rest, then the distance traveled by cart is 2 meters.
Which definition of distance suits you best?How do you define distance? Regardless of direction, distance measures an object's overall movement. Distance is defined as the amount of ground covered by an object, regardless of its starting or stopping position.
Horizontal force acting on the cart, F = 11 N
Mass of the cart, m = 35 kg
To find,
Distance covered by the cart in 3.5 seconds if it starts from rest.
Solution,
Let x is the distance moved by the cart. It can be calculated using the second equation of motion as :
s = 1.925 meters
What is the definition of a distance?In terms of "how much land an object is covered" while traveling, distance—a scalar quantity—describes this. Displacement is a vector number that expresses the overall change in the object's location, and it is related to the phrase "how far from place the thing is."
To know more about distance visit:
https://brainly.com/question/15172156
#SPJ4
wind gusts create ripples on the ocean that have a wavelength of 3.43 cm and propagate at 8.87 m/s. what is their frequency (in hz)?
Frequency of ripples is 2.58Hz if the wavelength of ripples is 3.43cm and speed of ripples is 8,87m/sec.
Ripples are the moment impact of wind on water and they subside as fast as they structure, as the surface strain of the water hoses their endeavors. In the event that a breeze blows consistently across a sufficiently enormous fix of water for a couple of hours then the waves become waves and these won't be hosed with such ease.
We know that there is a co-relation between speed, wavelength and frequency of ripple, which is given by
Speed=frequency × wavelength or
=> c =v×λ
Now,we have λ=3.43cm =0.0343m,c=8.87m/sec,v=?
So,on putting the values, we get
=>8.87 = v × 3.43
=>v=8.87/3.43
=>v=2.58Hz.
Hence,frequency is 2.58Hz.
To know more about frequency, visit here:
https://brainly.com/question/4393505
#SPJ4
how would you characterize atmospheric conditions if the adiabatic lapse rate is steeper than the environmental lapse rate
The atmosphere is deemed to be completely unstable if the environmental lapse rate is higher than the dry adiabatic lapse rate.
How do lapse rate circumstances relate to the stability of the atmosphere?
Higher than dry-adiabatic lapse rates are unstable and promote vertical motion. In the absence of saturation, an atmospheric layer is neutrally stable if its lapse rate coincides with the dry-adiabatic rate. Any existing vertical motion is neither slowed down nor accelerated in this case.
What separates adiabatic lapse rate from environmental lapse rate?
The adiabatic lapse rate is the rate at which an air parcel's temperature is varying adiabatically.
Raise your knowledge of Atmospheric Stability
Visit:
https://brainly.com/question/450968
#SPJ4
a vertical spring scale can measure weights up to 210 n . the scale extends by an amount of 13.5 cm from its equilibrium position at 0 n to the 210 n mark. a fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.15 hz . part a ignoring the mass of the spring, what is the mass m of the fish?
sheesh sheesh
Explanation:
when the distance between two masses doubles, the strength of the gravitational force between them ―
When the distance between two masses doubles, the strength of the gravitational force between them is decreased by a factor of 4.
Gravitational Force:
Any two mass-containing objects are attracted to one another by gravitational force. Because it consistently attempts to pull masses together rather than pushing them apart, the gravitational force is known as attractive. In reality, everything in the cosmos is tugging on everything else, including you! Newton's Universal Law of Gravitation is what it is known. Admittedly, you aren't pushing on those other objects all that much because you don't have a very large mass. Additionally, items that are very far apart from one another do not clearly tug on one another. However, we can calculate the force because it exists.
It is given by,
[tex]F=\frac{GMm}{r^{2} }[/tex]
We can clearly evaluate from the above formula that
[tex]F[/tex] ∝ [tex]\frac{1}{r^{2} }[/tex]
So,
When the distance between two masses doubles, the strength of the gravitational force between them is decreased by a factor of 4.
Learn more about Gravitational force here
https://brainly.com/question/24783651
#SPJ4
