A block is attached to a spring. The amplitude of the subsequent oscillations is 0.1 m.
Given that,
Mass attached m = 1 kg
Spring constant k = 16 N/m
Instantaneous speed v = 40 cm/s = 0.4 m/s
Amplitude A = ?
Using conservation of energy,
∆K.E + ∆P.E = 0
K.E(final) - K.E(initial) + P.E(final) - P.E(initial) = 0
At the beginning immediately the hammer hits the mass, the potential energy is 0 J.
Therefore, P.E (initial) = 0 J, so the speed is maximum.
Also, at the end, at maximum displacement, the speed is zero, therefore, K.E (final) = 0
So, the equation becomes
- K.E(initial) + P.E(final) = 0
K.E(initial) = P.E(final)
½ mv² = ½ kA²
mv² = kA²
1 × 0.4² = 16 × A²
0.16 = 16* A²
A² = 0.16/16
A² = 0.01
A = √0.01 = 0.1 m
Thus, the amplitude of oscillation is 0.1 m.
To know more about amplitude:
https://brainly.com/question/15684054
#SPJ4
what is the force on the electron, magnitude, and direction? (i.e. when it is in the plane of the page as stated above.) justify your answer.
Faraday's left hand rule gives us the direction of the force on the particles, then [tex]F^{\prime}=B q v\\[/tex] gives the size of the force.
What is direction?
Direction is characterized as the course that anything follows, the route that must be taken to go to a particular location, the direction in which something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.
If we use Faraday's left hand rule on each particle, we can determine the effect of the magnetic field on the particle. The diagram shows the direction of the fields and the "current" so we can apply the rule.
For the electron, the magnetic field will exert a force directed into the plane of the paper (or if travelling on the earth, this will be towards the earth).
For the proton, the magnetic field will exert a force out of the paper (or if travelling on the earth, this will be away from the earth).
The force on a particle of charge q moving in a magnetic field, B with a velocity v is given by:
[tex]F=B q v[/tex]
Both proton and electron have a charge of [tex]1.6 \times 10^{-19} C\\[/tex]
For the electron
[tex]$$F=\left(190 \times 10^{-3}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 575000=1.748 \times 10^{-14} N$$[/tex]
For the proton
[tex]$$F=\left(54.2 \times 10^{-6}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 130000=1.127 \times 10^{-18} N$$[/tex]
To learn more about direction visit
https://brainly.com/question/17026169
#SPJ4
Part B
The general kinematic equations of motion for vertical displacement can also be simplified significantly. Write the simplified equation for y in this case. Explain how you have been able to simplify it from this general displacement equation:
The general vertical displacement equation for object moving upwards is written as h = v₀t - ¹/₂gt².
What is the vertical displacement of an object?The vertical displacement of an object is the height travelled by the object.
The general kinematic equations of motion for vertical displacement is written as follows;
y = y₀ + v₀t + ¹/₂at²
where;
y₀ is initial vertical position of the objectv₀ is the initial vertical velocity of the objecta is the acceleration of the objectt is the time of motionIf the object is moving upwards, the new kinematic equation becomes;
h = 0 + v₀t - ¹/₂gt²
h = v₀t - ¹/₂gt²
where;
h is the vertical displacement of the objectv₀ is the initial vertical velocity of the objectg is the acceleration due to gravityt is the time of motion of the objectFor the simplified equation above, the acceleration of the object changes to acceleration due to gravity since the object is moving against gravity in the negative direction.
Thus, the general kinematic equations of motion for vertical displacement is written in terms of acceleration due to gravity in negative direction since it is moving upwards.
Learn more about vertical displacement here: https://brainly.com/question/13411664
#SPJ1
The half-life for a 200 gram sample of radioactive element X is 5 days. How much of element X remains after 15 days have passed?
A. 200 g - no change
B. 25 g
C. 50 g
D. 12.5 g
Answer:
B.) 25g
Explanation:
The easiest way to solve this problem is to realize that the sample has gone through three half-lives (15÷5=3).
Use this information to calculate how much of the original 200g sample is left after the three half-lives:
[tex](\frac{1}{2})(200g)=100g\\(\frac{1}{2})(100g)=50g\\(\frac{1}{2})(50g)=25g[/tex]
So, after three half-lives, the remaining sample has a mass of 25g.
Elcft parallelepiped is in an electric field which to the left of the dashed line; has the value Eleft =< -55.37,0,0 > N/C,and Eright =< 55.37,0,0 > N/C to the right of the dashed line_ The top and bottom of the parellelepiped are rectangles Iying in the = plane, and measure /1 by l2, as shown: The left and right faces are rectangles inclined by an angle 0 = 83.489 from the € axis, and measure lz by l3. The values Of L1,l2, and l3 are 23.82 cm, 11.27 cm, and 32.48 cm, respectively. What charge is contained inside the parallelepiped?
There is a net flux going into the surface, the parallelepiped must have a net charge (negative charge). Additionally, without an external field, all lines would point at the slab.
Six parallelograms come together to form a three-dimensional shape called a parallelepiped (the term rhomboid is also sometimes used with this meaning). It is comparable to a parallelogram in the same way that a cube is comparable to a square. There are three similar descriptions of a parallelepiped. A prism with a parallelogram-shaped base, a hexahedron with three pairs of parallel faces, and a polyhedron with six faces, each of which is a parallelogram.
There are pairs of parallel and congruent faces. The parallelepiped has twelve (12) edges and eight (8) vertices. The edges of the parallelepiped can be split into three (3) sets of four (4) edges each, where the edges in each set are all parallel and the same length. The parallelepiped is also a zonohedron.
A parallelepiped is a three-dimensional object having six faces and a parallelogram-like design. It has 8 vertices, 6 faces, and 12 edges. The parallelepiped is also known by the names rhombic, cuboid, and cube.
To know more about parallelepiped
https://brainly.com/question/29835281
#SPJ4
With respect to stellar spectra, select all of the correct statements from the following list.
Doppler shifts in spectral lines give clues to the motions of stars.
The Lyman and Paschen series of the hydrogen spectrum are not visible.
Stellar spectra are absorption spectra.
Spectra can reveal the chemical composition of stars.
With respect to stellar spectra Doppler shifts in spectral lines give clues to the motions of stars.
What do spectral lines tell us?The spectral lines of an element can be used by astronomers to determine the element's temperature as density within the star. The spectral line may also be used to display the star's electric flux. The width of the line may be used to gauge how rapidly the material is moving. We can learn something about stellar winds from this.
How are elements recognized by spectral lines?Dark bands in a broad band can be used to identify components, and it can also reveal an object's temperature: The spectrum has more green, blue, and violet hues as the temperature rises. The spectrum of relatively cool objects is dominated by deep red or red and yellow.
To know more about Spectral lines visit:
https://brainly.com/question/27494244
#SPJ4
A 20 g ball of clay traveling east at 2.5 m/s collides with a 25 g ball of clay traveling north at 2.0 m/s .
What is the speed of the resulting 45 g ball of clay?
What is the direction of the resulting ball of clay?
The final velocity of the two balls after collision is 1.7 m/s and the direction is 45⁰.
The given parameters;
mass of the first clay ball, m₁ = 20 g = 0.02 kg
initial velocity of the first clay ball, u₁ = 3 m/s
mass of the second clay ball, m₂ = 30 g = 0.03 kg
initial velocity of the second ball, u₂ = 2 m/s
The initial momentum of the fist ball is calculated as follows;
P₁ = m₁u₁
P₁ = (0.02)(3)
P₁ = 0.06 kg.m/s
The initial momentum of the second ball is calculated as follows
P₂ = m₂u₂
P₂ = (0.03)(2)
P₂ = 0.06 kg.m/s
The resultant initial momentum of the two balls is calculated as follows;
Apply the principle of conservation of momentum, to determine the final velocity of the two balls;
The direction of the two ball's velocity is calculated as follows;
Thus, the final velocity of the two balls after collision is 1.7 m/s and the direction is 45⁰To know more about speed direction visit:
https://brainly.com/question/13776007
#SPJ1
large redshifts move the positions of spectral lines to longer wavelengths and change what can be observed from the ground. for example, suppose a quasar has a redshift of z
Laboratory experiments on Earth have examined that each element in the periodic table emits photons only at definite wavelengths (determined by the excitation state of the atoms).
These photons are manifest as either emission or absorption lines in the spectrum of an astronomical object, and by observing the position of these spectral lines, we can detect which components are present in the object itself or along the line of sight.
although, when astronomers observe spectral lines in extragalactic objects (such as galaxies and quasars), they find that the wavelength of the notice spectral lines is different from the laboratory experiments.
In most cases, the wavelength of the spectral lines is longer and thus are shifted toward the red end of the spectrum they are redshifted.
There are many explanations for this redshift phenomenon.
To know more about redshifts:
https://brainly.com/question/13494718
#SPJ4
apply the loop rule to loop 2 (the smaller loop on the right). sum the voltage changes across each circuit element around this loop going in the direction of the arrow. remember that the current meter is ideal.express the voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.
The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.
When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.
Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.
Learn more about The loop rule here:- https://brainly.com/question/15705903
#SPJ4
aphasia
Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience:
Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience: aphasia.
Aphasia is the inability to understand or form language due to damage to certain areas of the brain The main causes are stroke and head trauma. Although the prevalence is difficult to determine, aphasia due to stroke is estimated at 0.1-0.4% in the Global North. Aphasia can also be the result of a brain tumor, brain infection, or neurodegenerative disease (such as dementia).
To be diagnosed with aphasia, communication after an acquired brain injury Speech or language must be significantly impaired in one (or more) of the four aspects of Alternatively, in the case of progressive aphasia, it must have decreased significantly over a short period of time. The four dimensions of communication are auditory comprehension, verbal expression, reading and writing, and functional communication.
Learn more about Aphasia here : https://brainly.com/question/4045064
#SPJ4
Calculate the power of an electric bulb which consumes 2400 J in a minute
power of the bulb = 40 watt
Briefing
Power: In physics, the term "power" refers to the rate at which a task is completed, or how much energy is used during the allotted time.
What is energy now?
In physics, energy refers to the ability to do a task. It may exist in different forms, including potential, kinetic, thermal, electrical, chemical, radioactive, and others.
Consequently, in light of the posed query:
2400 J of energy
60 seconds in a minute is time.
As a result, we know that Power = Energy/Time.
p = E/t p = (2400-/60) joules/sec
p=40 W
to learn more about Energy.
Visit
https://brainly.com/question/1932868
#SPJ4 .
A student applies a force F at an angle of θ below the horizontal to a 50 kg desk, which causes the desk to move across the room at a constant speed.
Angle θ= 20 Degrees
Force= 200 N
Draw and label an appropriate force vector diagram for the desk.
What is the weight of the desk?
What is the magnitude of the normal force acting on the desk?
What is the magnitude of the friction force acting on the desk?
The magnitude of the weight, normal and friction forces are 490N, 455N and 16.66N respectively.
The force applied by the student at the angle of 20 degrees has a magnitude of 200N.
The desk is moving across the room with a constant speed.
The mass of the desk is Kg.
The weight of the desk is given by,
W = Mg
Where,
g is acceleration due to gravity.
Putting values,
W = 50 x 9.8
W = 490N.
The magnitude of the normal force is given by,
N = WcosA
Where,
A is the angle with x-axis.
Putting values,
N = 490 x cos(20)
N = 455N.
The magnitude of the Friction force is given by,
F = W x sin(20)
F = 490 x 0.34
F = 16.66N.
To know more about Friction, visit,
https://brainly.com/question/24338873
#SPJ4
calculate the molar mass of the unknown gas. (remember that the faster the rate of effusion, the shorter the time required for effusion of 1.0 l ; that is, rate and time are inversely proportional.) express your answer using two significant figures.
It is possible to determine that the unknown gas has a molar mass of 555.6 g/mol from Graham's law of effusion.
We are given that,
The molar mass of gas 1= M₁
The molar mass of gas 2= M₂
Rate1 = 1.0 L/30s
Rate2 = 1.0 L/125s
Here, rate 1 represents the first gas's effusion rate and rate 2 represents the second gas' effusion rate. Graham's law of effusion is stated that can be written as,
(M₂/M₁)1/2 = Rate1/Rate2.
Rate1/Rate2 = (M₂/M₁)1/2
(1/30)/(1/125)=[(M₂/(32.0g/mol)1/2]
M₂₂ = 555.6g/mol
As a result, the unknown gas has a molar mass of 555.6 g/mol.
To know more about molar mass
https://brainly.com/question/29817367
#SPJ4
Two blocks, with masses indicated in the figure above, are at rest on a horizontal surface and connected by a string of negligible mass and a compressed spring. There is negligible friction between the blocks and the surface. The string is cut, and the spring pushes the blocks away from each other. Which of the following statements are true about the motion of the blocks immediately after the string is cut? select two answers.
1. The velocity of the center of mass of the two-block system is zero.
2. The magnitude of the acceleration of the left block is greater than that of the right block.
The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.
Learn more about center of mass here:
https://brainly.com/question/27549055
#SPJ4
find the finel angular velocity (w) when the intial angular velocity(w) is 5rad/s the Angular acceleration is 2rad/s² and the time of motion is 5sec
Answer:
15 rad/s
Explanation:
Given:
α = 2 rad/s²
ω₀ = 5 rad/s
t = 5 s
Find: ω
ω = αt + ω₀
ω = (2 rad/s²) (5 s) + (5 rad/s)
ω = 15 rad/s
the following items describe observational characteristics that could indicate that an object is either a white dwarf or a neutron star. match each characteristic to the correct object.
When a white dwarf acquires enough mass for its carbon interior to start fusing, a white dwarf supernova results.
The white dwarf entirely explodes as the star's fusion starts nearly immediately throughout the entire star. When iron is produced during fusion in a star's core, a "massive stellar supernova" results. If a white dwarf in a near binary system acquires enough mass to surpass the "white dwarf limit (1.4 solar masses)," it will erupt as a supernova. The absence of hydrogen characteristics in type I supernovae's spectra at maximum luminosity is a crucial identifying trait. The remnant core of a low-mass star known as a white dwarf is protected from the force of gravity by electron degeneracy pressure. The mass of the Sun is often condensed into a body no bigger than Earth in a white dwarf.
to know more about white dwarf please visit.
https://brainly.com/question/25872293
#SPJ4
A steam power plant operates on the simple ideal Rankine cycle between the pressure limits of 10 kPa and 10 MPa, with a turbine inlet temperature of 600 degree C. The rate of heat transfer in the boiler is 800 kJ/s. Disregarding the pump work, the power output of this plant is: A. 284 kW B. 800 kW C. 508 kW D. 243 kW E. 335 kW
Option E; The pump work, the power output of this plant is 335KW
Pressure. at turbine. inlet P1 = 10 Mpa.
Enthalpy at turbine inlet = h1=3625.84 KJ/kg.
Entropy at turbine inlet S1 =6.90 KJ/kg-K.
It is given that process performed acceording to ideal rankine cycle which is "Reversible adiabatic expansion' in case of turbine wor., Since it is reversible adiabatic expansion, entropy at turbine inlet and entropy at turbine outlet is constant. So quality at turbine outlet is evaluated by using this relation. S1 = S2.
Pressure at turbine outlet = 10 Kpa.
Enthalphy of steam = hg =2675.1 KJ/kg.
Enthaphy of liquid=hf =417.51 KJ/kg
Entropy of steam = Sg =7.3589 KJ/kg-K.
Entropy of liquid =Sf =1.302 KJ/kg-K.
We know S1 = S2 =6.090=1.302+x(7.3589 - 1.302).
Quality at turbine exit x =0.79.
Enthalphy at exit = h2 = 417.51+ 0.79*(2675.1 - 417.51) =2201 KJ/kg-K.
heat transfered= mass*(enthlphy at exit of condenser - enthalphy at turbine inlet), Since pump work negleted
At exit of condenser, steam gets converted into water at 10 Kpa pressure whose enthalphy is hf =417.51 KJ/kg.
800 = m(3625.84 - 417.51).
mass flow rate of steam = 0.24 Kg/sec.
Turbine work the power output of this plant is = m(h1 - h2) =0.24(3625.84 - 2201) = 335 KW.
Learn more about power here:
https://brainly.com/question/20335923
#SPJ4
A block of mass 4 kg slides on a horizontal frictionless surface with a speed of 2 m/s. It is brought to rest in compressing a spring in its path. If the force constant of the spring is 400 N/m, by how much the spring will be compressed?
a. 2 x 10(-2) mb. 0,2 mc. 20 md. 200 m
A block with mass 4 kg glides at a speed of 2 m/s across a horizontal, frictionless surface. By compressing a spring in its journey, it comes to rest. The spring has a 0.2 m compress.
What process does kinetic energy undergo to become potential energy?But when you exert force on the battery, the charged particles begin to function, transforming the potential energy into kinetic energy. Similar to this, when you turn on a light, the potential energy goes through your wiring and is transformed into light and heat, both of which are examples of kinetic energy.
Given that,
Block weight: 4 kg
Speed = 2 m/s.
400 N/m force constant; we must determine the distance.
The elastic potential energy of the spring is created from the kinetic energy of the block.
Kinetic energy and potential energy in relationship
1/2mv^2=1/2kx^2
x^2=mv^2/k
put the value into the formula
x^2= 4*2^2/400
x^2=.04
x= .2m
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ4
A taxi company is trying to decide whether to purchase brand A or brand B tires for its fleet of taxis. To estimate the difference in the two brands, an experiment is conducted using 12 of each brand. The tires are run until they wear out. The results are Brand A: \overline{x}_1 = 36. 300 x
1
=36.300 kilometers, s_1s 1
= 5000 kilometers. Brand B: \overline{x}_2 = 38. 100 x
2
=38.100 kilometers, s_2 = 6100s 2
=6100 kilometers. Compute a 95% confidence interval for \mu A − \mu BμA−μB assuming the populations to be approximately normally distributed. You may not assume that the variances are equal.
A 95% confidence interval for μA-μB is 0.025
If we want to make a 95% confidence interval estimate for an unknown population mean. This means that there is a 95% probability that the confidence interval will have the true population mean.
Thus, P( [sample mean] - margin of error < μ < [sample mean] + margin of error) = 0.95.
We have,
n1 = 12
s1 = 5000
mean x1 = 36300
n2= 12
s2 =6100
mean x2 =38100
We have to find 95%confidence interval for μA- μB
from 95% = 100 (1-α%)
1-α = 0.95
α = 1-0.95 =0.05
α/2 = 0.025
To know more about mean here
brainly.com/question/14882017
#SPJ4
Filed sdi as269len insbude sil velfs ovom
What distance will a bus go if it is traveling at a rate of 50 km/hr for 3.8
hours?
A. 190.0 kilometers
B. 53.8 kilometers
C. 46.2 kilometers
D. 13.2 kilometers
The distance the bus will go, if it is travelling at a rate of 50 km/hr for 3.8 hours is 190 kilometers (Option A)
How do I determine the distance the bus will go?We know that speed is defined as distance travelled per unit time i.e
Speed = Distance travelled / time
Cross multiply
Distance travelled = Speed × time
With the above formula, we can calculate the distance the bus will go. Details below:
Speed = 50 km/hr Time = 3.8 hoursDistance travelled =?Distance travelled = Speed × time
Distance travelled = 50 × 3.8
Distance travelled = 190 kilometers
Thus, we can conclude that the distance the bus will go is 190 kilometers (Option A)
Learn more about distance travelled:
https://brainly.com/question/18265275
#SPJ1
The -2.0 nC charge in the figure is in equilibrium. What is the charge of q ?
Hi there!
The easiest way to find the charge of q would be to find the "downward" (relative to the page) forces produced by the two positive 2.0nC charges. The force produced by 'q' would have to be equal and in the opposite direction to the sum of these forces.
The force equation involving two charges is:
[tex]F_E = \frac{kq_1q_2}{r^2}[/tex]
[tex]F_E[/tex] = Electrostatic Force (N)
k = Coulomb's Constant (8.99 × 10⁹ Nm²/C²)
q₁, q₂ = Charges (C)
r = distance between charges (m)
Let's begin by finding the electrostatic force between the -2.0 nC charge and one 2.0 nC charge.
(Recall that nC is 10⁻⁹ C and cm is 10⁻² m)
[tex]F_E = \frac{(8.99*10^{9})(2.0*10^{-9})(2.0*10^{-9})}{(\sqrt{0.03^2 + 0.02^2})^2}[/tex]
*We are using the Pythagorean theorem to find the total distance.
Plugging into a calculator:
[tex]F_E = 2.767*10^{-5} N[/tex]
We are only interested in the VERTICAL component of this force, since the 'q' charge is directly in line with the -2.0nC charge and does not produce any horizontal forces.
First, let's find the angle that the 2.0nC charges make with the horizontal.
[tex]tan^{-1}(\frac{2}{3}) = 33.69^o[/tex]
Now, we can plug this value of the angle into sine to find the vertical component of the force.
[tex]F_E(vertical) = F_E sin\theta = F_E sin(33.69) = 1.53 * 10^{-5} N[/tex]
Since there are two charges and the other has the SAME charge, we can simply double this quantity.
[tex]F_E (\text{vertical, total}) = 3.07 *10^{-5} N[/tex]
So, for the -2.0 nC charge to be in equilibrium, the 'q' charge must produce an electrostatic force that is equal to the above total.
[tex]F_E = \frac{kq_1q}{r^2}[/tex]
Rearrange to solve for q.
[tex]q = \frac{r^2 F_E}{kq_1}[/tex]
Plug and solve.
[tex]q = \frac{(0.02^2) (3.07*10^{-5})}{(8.99*10^9)(2.0*10^{-9})}} = 6.83*10^{-10} C[/tex]
So:
[tex]\large\boxed{q = 6.83*10^{-10} C = 0.68 nC}[/tex]
sphere a has mass m and is moving with velocity v. it makes a head-on elastic collision with a stationary sphere b of mass 2m. after the collision their speeds (va, vb) are:
When a ball of mass m elastically collides with mass 2m, momentum and kinetic energy are conserved.
We know that,
Momentum Conservation:
mv+ 0= m(va)+ 2m(vb)......(a)
m(v)=m(va+2vb)
=> v= va+ 2vb
We know that,(a+b)2=a2+b2+2ab
Then,
(va+2ab)2=va2+4ab2+4(va×vb)
Squaring both sides gives v2= va2+4vb2+4(va×vb).....(1)
Kinetic conservation of energy
mv2=mva2+2mvb2
v2=va2+2vb2.....(2
Subtracting 2 from 1 gives
vb=-2va
Substituting into (a), we get
v a=-v/3
v b=2v/3
to know more about kinetic energy, visit
https://brainly.com/question/19490882
#SPJ1
A 50 gg mass rotates in a vertical plane--call it the xy-plane with the y-axis pointing up--at the end of a 75-cmcm-long, massless, rigid rod. The other end of the rod is attached to a frictionless pivot at the origin.
What is the gravitational torque about the pivot when the mass is 60 ∘∘ above the +x-axis? Give your answer using unit vectors.
The gravitational torque about the pivot when the mass is 60 ∘∘ above the +x-axis is (0.1838 Nm)k
What is torque?Torque is the turning effect of a force which causes rotation. It is given by τ = F × d where
F = force and d = perpendicular distance of force from point of action.What is the gravitational torque about the pivot when the mass is 60° above the +x-axis?Since a 50 g mass rotates in a vertical plane--call it the xy-plane with the y-axis pointing up--at the end of a 75-cm-long, massless, rigid rod.
The gravitational torque is given by τ = F × d where
F = component of weight perpendicular to rod = -(mgcosФ)j where m = mass, g = acceleration due to gravityФ = angle between rod and x axis and d = length of rodSo, τ = F × d
= -(mgcosФ)j × di
= mgdcosФ(-j × i)
= -mgdcosФ(j × i)
= -mgdcosФ(-k)
= (mgdcosФ)k
Given that
m = 50 g = 0.05 kgg = 9.8 m/s²,d = 75 cm = 0.75 m and Ф = 60°Substituting the values of the variables into the equation, we have
τ = (mgdcosФ)k
= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k
= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k
= (0.3675 kgm²/s² × 0.5)k
= (0.18375 kgm²/s²)k
= (0.18375 Nm)k
≅ (0.1838 Nm)k
So, the torque is (0.1838 Nm)k
Learn more about torque here:
https://brainly.com/question/28219986
#SPJ1
Which statement best explains the purpose of making the loop of wire turn between the permanent magnets in an electric generator?
OA. The magnetic fields of the magnets cause electric charges in the
moving wire to flow.
B. The poles of the magnets reverse while the loop of wire is in
motion.
OC. The electric charges in the loop are repelled if the loop of wire
stops turning.
D. The electric current in the loop causes a magnetic field to form
around the moving wire.
Answer: C
Explanation:
Enjoy <3
when an object of unknown mass is attached to an ideal spring with force constant 130 n/m, it is found to vibrate with a frequency of 7.25 hz.
When a massless item is fastened to an ideal spring with a force constant of 130 n/m, it is discovered that it vibrates at a frequency of 7.25 hz. The motion lasts 0.138 seconds.
What does a spring's force constant mean?In accordance with Hooke's law, the force necessary to compress or enlarge a spring is directionally related to or proportionate to the length it is stretched to. K is used to indicate the force constant.
What exactly is a vibration's frequency?The rate of vibrations and oscillations is called frequency, and it is expressed in hertz (Hz) units. To distinguish and ascertain vibrational patterns, frequencies are used. Therefore, a faster-vibrating atom would be seen as having a greater frequency than a slower-vibrating one.
Briefing:T= 1/f = 1/7.25 Hz = 0.138s
To learn more about frequency visit:
brainly.com/question/14727355
#SPJ4
The given question is incomplete. The complete question is:
When an object of unknown mass is attached to an ideal spring with force constant 130 n/m, it is found to vibrate with a frequency of 7.25 hz. What is the period of the motion?
show an example of the method described above. ii. why might your calculated value for the half-life of barium-137 from this method differ from the accepted value?
By monitoring a sample's activity as it decays, Ba-137m can be calculated. Utilizing AktivLab, the radioisotope Ba-137half-life, m's which was isolated from Cs-137, is found.
How is the experiment's half-life determined?After that, the half-life is calculated using the basic concept of activity, which is the sum of the radionuclide decay constant,, and the number of radioactive atoms present, N. By using the formula = ln2/T1/2, one may solve for and obtain the half-life.
Describe half-life in detail.?A half-life is the duration needed for something to reduce in quantity by half. The phrase is most frequently used in reference to radioactive decay, which takes place when unstable atomic particles shed energy. There are 29 elements that can travel through this, according to known facts.
Learn more about redox reaction here:
https://brainly.com/question/13293425
#SPJ4
A student releases the 4kg bob of a 0.47m long
pendulum from the position shown.
What is the period of the harmonic motion?
S
What is the frequency of the harmonic motion?
Hz
How many cycles would the pendulum make in
45s?
6
(You may answer with a decimal)
6°
Projectile launch is a kinematics application to the movement of objects near the earth's surface.
How to find Projectile launch?Since the acceleration is constant, the time it takes for the body to go up is equal to the time it takes to go down; thus, the time it takes to go up is half of the total time.
tu = ttotal/2
tu = 4.70 / 2
tu = 2.35 s
The height the ball reach
The point of maximum height where the vertical velocity is zero
vy = voy - gt
0 = voy - gt
voy = gt
= 9.8 x 2.35
= 23 m / s
By using the equation.
v²y = v²oy - 2gy
0 = v²oy - 2gy
y = v²oy/2g
y = 23²/2 x 9.8
y = 27 m
To find the initial velocity,
Initial vertical velocity = 23 m / s
vx = x/t
The throw range is 44m in time of 4.60 s
vₓ = 44 / 4.60
v₀ = [tex]\sqrt{v^{2}ox + v^{2}oy }[/tex]
v₀ = [tex]\sqrt{9.56^{2}+23^{2} }[/tex]
v₀ = 24.9 m / s
The launch angle is:
Let's use trigonometry
tan θ = voy/vox
θ = tan⁻¹ voy/vox
θ = tan⁻¹ 23/9.56
θ = 67.4°
To learn more about Projectile launch refer to :
https://brainly.com/question/24216590
#SPJ1
umama wants to enable user experience virtualization (ue-v) by configuring group policy settings. two important settings that she needs to configure are the setting storage location and settings template catalog location. which of the following is true of this scenario?
Correct. When new user profiles are created, the default profile is utilised. Umama wants to configure Group Policy settings to enable User Experience Virtualization (UE-V).
UEV policy settings: What are they?You can enable or disable User Experience Virtualization using this Group Policy setting (UE-V). Only versions of UE-V 2.x and earlier are affected by this setting. Use the Enable UE-V setting in Wind ows 10, version 1607, for UE-V. The location of the settings template catalogue and the location of the settings storage location are two crucial settings that she must set up.
Microsoft User Experience Virtualization: What is it?A programme called Micro soft UE-V (User Experience Virtualization) enables users to switch between Wind ows devices while keeping their current operating system (OS) and application settings.
Learn more about OS here:
brainly.com/question/6689423
#SPJ1
what are the strength and direction of the electric field at the position indicated by the dot in (figure 1)?
The strength of the electric field is 2157 N/C, the angle at the net electric field is 9.33° above the horizontal.
Strength of the electric field:
= E = k Q / d²
Given;
k = 8.99 · 10⁹
d 1 = 5 cm = 0.05 m
Q 1 = 3 n C = 3 · 10⁻⁹ C
E 1 = 8.99 · 10^9 · 3 · 10⁻⁹ C / ( 0.05 m )² = 10,788 N / C
E 1 = 10,788 i + 0 j
(d 2)² = √ (5² + 10²) =√ 125 = 11.18 cm = 0.1118 m
E 2 = 8.99 · 10⁹ · 3 · 10⁻⁹C / ( 0.1118 m )² = 2,157 N/C
Angle:
cot⁻¹ ( 5/10 ) = cot⁻¹ 0.5 = 63.43°
= E 2 = cos 63.43° · 2,154 i + sin 63.43° · 2,154 j
= E 2 = 963.46 i + 1,927.02 j
E = E 1 + E 2 = 11,731.46 i + 1,927.02 j
= √ (11,731.46² + 1,927.02² )
= 11,888 N/C
α = tan⁻¹ ( 1,927.02/11,731.46) = tan⁻¹ 0.1643 = 9.33° above the horizontal.
-- The given question is incomplete, I answer the question in general according to my knowledge and the complete question is
"What are the strength and direction of the electric field at the position indicated by the dot in (figure 1)? Where, the two positive charges of 3 nC are at a distance of 10 cm and the distance between the first proton and the position indicated is 5 cm." --
To know more about Electric Field:
https://brainly.com/question/1592046
#SPJ4
A runner first runs a displacement A of 3.20 km due south, and then a second displacement Bthat points due east.(a) The magnitude of the resultant displacement A + B is 5.18 km. What is the magnitude (in m) of B?____kmWhat is the angle that A + Bmakes relative to due south? (Your answer must be a positive number from 0 to 180 degrees).Is this angle east or west of south?(b) Consider a situation where the runner still runs a displacement B due east, and we find that the vector A − B has a magnitude of 5.18 km. In this situation, what is the magnitude (in km) of B?_____kmWhat is the angle that A − B makes relative to due south? (Your answer must be a positive number from 0 to 180 degrees).Is this angle east or west of south?
The magnitude of the resultant displacement A + B is 5.18 km. Displacement of A is 3.2 km. The magnitude of B is 4.07 km.
It can be seen that the resultant displacement and the other 2 displacements form a right angle triangle, with A + B as the hypotenuse, 3.2 km as the opposite and the displacement B as the adjacent.
By using Pythagoras theorem, the adjacent side of the triangle can be found.
(5.18)² = (3.20)² + B²
26.83 = 10.24 + B²
B² = 26.83 - 10.24
B² = 16.59
B = √16.59 = 4.07 km
Thus, the magnitude of B is 4.07 km.
To know more about Pythagoras theorem:
https://brainly.com/question/14785570
#SPJ4
sand dunes form when ? ? sand build up in one place
Sand dunes form when the mound grows in circumference and height due to subsequent sand build up in one place by wind.
What is sand dunes?A sand dune is a mass of loose sand grains that have accumulated due to wind movement. The mound will eventually get so massive that it will collapse under its own weight to form a sand dune as it increases in height and circumference as a result of additional sand deposits. A set of sand dunes is referred to as a sand dune complex or sand dune system by geologists.
On the other hand, depending on the quantity of vegetation present, vast clusters of sand dunes are referred to as sand seas or sand dune fields. Ergs are another name for sand seas.
Learn more about sand dunes here:
https://brainly.com/question/2456718
#SPJ1
Your question is incomplete, but most probably the question was:
sand dunes form when _______ sand build up in one place by wind.
