Answer:
D. length × width
Explanation:
eg. 30 cm(length) × 20cm(width) = 600cm²
Atoms are found to move from one lattice position to another at the rate of 300,000 jumps/s at 500 0C when the activation energy for their movement is 10,000 cal/mol. Calculate the jump rate at 400 0C.
Answer:
1
Explanation:
1
For the reaction...
N2 + O2 <=> 2NO: AH = +182 kJ mol-1.
If the temperature is increased the equilibrium position will shift
Your answer:
a) to the left
b) to the right
c) to the left and right
d) neither left nor
right
Answer:
B
Explanation:
AH is positive so the forward reaction is endothermic. Thus, increasing temperature would cause equilibrium to shift to the right as endothermic reaction favors higher temperature. This increases the yield of NO.
A student sets up the following equation to convert a measurement.
(The stands for a number the student is going to calculate.)
Fill in the missing part of this equation.
Answer:
–0.13 Pa.m²
Explanation:
From the question given above, the following data were obtained:
Measurement (Pa.mm²) = –1.3×10⁵ Pa.mm²
Measurement (Pa.m²) =?
We can convert from Pa.mm² to Pa.m² by doing the following:
1 Pa.mm² = 1×10¯⁶ Pa.m²
Therefore,
–1.3×10⁵ Pa.mm² = –1.3×10⁵ Pa.mm² × 1×10¯⁶ Pa.m² / 1 Pa.mm²
–1.3×10⁵ Pa.mm² = –0.13 Pa.m²
Thus, –1.3×10⁵ Pa.mm² is equivalent to –0.13 Pa.m².
The complete equation will be:
[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]
Explanation:
Given:
The equation to convert a measurement:
[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]
To find:
The missing part of the equation.
Solution:
[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]
On LHS the unit is in [tex]Pa. mm^2[/tex] and RHS the unit is in [tex]Pa.m^2[/tex] which means that we have to convert [tex]mm^2[/tex] to [tex]m^2[/tex]
In 1 millimeter there are 0.001 meters.
[tex]1 mm = 0.001 m\\1 mm^2=0.000001 m^2=10^{-6} m^2[/tex]
So, the complete equation will be:
[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]
Learn more about conversions here:
brainly.com/question/24530464
brainly.com/question/17743460
HELP!!! i will give brainliest!!
Different chemical elements have different chemical symbols, and this is determined by their atomic structure. Look at the two chemical symbols in the image. Compare and contrast the atomic symbols and the atomic structure of fluorine and oxygen.
Answer:
Explanation:
fluorine have gained one electron that is why the sign is -1. they both have different number of protons. They have different neutron numbers. F have 10 and O have 8.
hope this helps :)
Acetylide ions react with aldehydes and ketones to give alcohol addition products.
a. True
b. False
Answer:
a
Explanation:
At a fixed volume, a four-fold increase in the temperature of a gas will lead to _______ in pressure.
Question 2 options:
A)
no change
B)
a two-fold decrease
C)
a four-fold decrease
D)
a four-fold increase
Answer:
D) a four-fold increase
Explanation:
According to Gay-Lussac's law, which states that the pressure of a given amount of gas is directly proportional to the temperature at a constant volume, the pressure increases with an increase in temperature.
According to this question, at a fixed volume, a four-fold increase in the temperature of a gas will lead to a four-fold increase in the pressure as well.
which type of chemical bond would be formed between two elements having electron configuration of 1s2 2s2 2p6 3s2 and 1s2 2s2 2p4
You dissolve 14 g of Mg(NO3)2 in water and dilute to
750 mL. What is the molarity of this solution?
Answer:
0.127M
Explanation:
Molarity of a solution = number of moles (n) ÷ volume (V)
Molar mass of Mg(NO3)2 = 24 + (14 + 16(3)}2
= 24 + {14 + 48}2
= 24 + 124
= 148g/mol
Using the formula, mole = mass/molar mass, to convert mass of Mg(NO3)2 to mole
mole = 14g ÷ 148g/mol
mole = 0.095mol
Volume = 750mL = 750/1000 = 0.75L
Molarity = 0.095mol ÷ 0.75L
Molarity = 0.127M
Classify each phrase according to whether it applies to photophosphorylation, oxidative phosphorylation, or both
Photophosphorylation Oxidative phosphorylation Both
1. occurs in plants produces ATP
2. occurs in chloroplasts
3. occurs in mitochondria
4. involves a larger electrical component
5. involves a smaller electrical component
6. involves a proton gradient
Answer:
1. Both
2. Phosphorylation
3. Both
4. Phosphorylation
5. Oxidative.
6. Both
Explanation:
Phosphorylation only occurs in chloroplast and it involves larger electrical component. Both Phosphorylation and oxidative occurs in mitochondria and it involves proton gradient. They occur in plants to produce ATP. Oxidative involves in smaller electrical component.
Photophosphorylation is a process that captures the solar energy from the sun to transform it into chemical energy. It occurs in the chloroplast of a plant cell.
What are photophosphorylation and oxidative phosphorylation?Photophosphorylation is a process of converting solar energy from the sun to ATP needed by plants and other organisms for cellular function and activity. This process takes place in the chloroplast of the plant cell and requires electrical components.
Oxidative Phosphorylation is the process of producing ATP with the help of oxygen and enzymes hence, occurs in aerobic cells. It does not need a larger electrical component.
Both phosphorylation and oxidative phosphorylation occurs in the mitochondria of plants cells and involves a proton gradient for the formation of ATP.
Therefore, oxidative phosphorylation option 5. involves a smaller electrical component, phosphorylation option 2. occurs in the chloroplast, and option 4. needs a larger electrical component.
Learn more about phosphorylation here:
https://brainly.com/question/1870229
How many carbon dioxide molecules react to form one glucose molecule during photosynthesis
Answer:
6 molecules
Explanation:
Only three elements are present in the products of photosynthesis: oxygen, carbon, and hydrogen. These same elements are present in the reactants of photosynthesis. Notice that it takes six molecules of water and six molecules of carbon dioxide to make one molecule of glucose
Answer:
6 molecules of carbone dioxide.
How is the enthalpy of reaction shown in this potential energy diagram
Answer:
In the given potential energy diagram, the energy of product at higher level and energy of reactant at lower level. The for this reaction will be positive. So, the enthalpy of reaction is defined as the difference of the energy of the reactants and the energy of the products.Hope this is fine for you,,!Of the below gases, which would deviate most from ideal gas behavior? CO O2 NH3 SF4
Answer:
For gases such as hydrogen, oxygen, nitrogen, helium, or neon, deviations from the ideal gas law are less than 0.1 percent at room temperature and atmospheric pressure. Other gases, such as carbon dioxide or ammonia, have stronger intermolecular forces and consequently greater deviation from ideality.
Explanation:
The table below provides data about a gas sample.
Volume
1.0 L
Pressure
303.9 kPa
Temperature
323 K
Which of the following can be determined using the data?
A the chemical composition of the gas
B. the condensation temperature of the gas
C. the distance between gas molecules in the sample
D. the number of gas molecules in the sample
Answer:
the number of gas molecules in the sample
Read the given equation:
NH + HCI - NH4ACI
Which of the following is true about the equation?
NH3 is the acid and NH4Cl is the salt.
NH3 is the base and NH4Cl is the salt.
HCI is the acid and NH3 is the salt.
HCl is the base and NH3 is the salt.
Answer:
NH3 is the base and NH4Cl is the salt.
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to rewrite the chemical equation and thus obtain:
[tex]NH_3+HCl\rightarrow NH_4Cl[/tex]
Whereas it is possible to notice that ammonia, NH3, received the hydrogen ions from HCl to form NH4 ions and Cl ions; in such a way, we infer that NH3 is the base and NH4Cl is the salt.
Regards!
Answer:
NH3 is the base and NH4Cl is the salt
Explanation:
In the presence of excess iodide ions, the iodine formed by reaction of iodide with NBS will react further to form triiodide ions. What does the triiodide combine with to form the blue color of the endpoint
Answer:
Starch.
Explanation:
When the triiodide combine with starch, it forms dark blue colour. Amylose in starch is responsible for the occurrence of a deep blue color when the iodine is combine with the starch. The iodine molecule goes inside of the amylose coil which makes a linear triiodide ion complex that goes into the coil of the starch that leads to an intense blue-black color in the end so we can say that starch turns the colour into blue.
If 4.00 moles of O2 occupies a volume of 5.0 L at a particular temperature and pressure, what volume will 3.00 moles of oxygen gas occupy under the same condition?
Answer: Volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.
Explanation:
Given: [tex]n_{1}[/tex] = 4.00 moles, [tex]V_{1}[/tex] = 5.0 L
[tex]n_{2}[/tex] = 3.00 moles, [tex]V_{2}[/tex] = ?
Formula used is as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{5.0 L}{4.00 mol} = \frac{V_{2}}{3.00 mol}\\V_{2} = 3.75 L[/tex]
Thus, we can conclude that volume occupied by 3.00 moles of oxygen gas under the same condition is 3.75 L.
If we have 1.23 mol of NaOH in solution and 0.85 mol of Cl2 gas is available to react, which one is the limiting reactant? Give your reason.
Answer:
NaOH is the limiting reactant.
Explanation:
Hello there!
In this case, since the reaction taking place between sodium hydroxide and chlorine has is:
[tex]NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]
Which must be balanced according to the law of conservation of mass:
[tex]2NaOH+Cl_2\rightarrow NaCl+NaClO+H_2O[/tex]
Whereas there is a 2:1 mole ratio of NaOH to Cl2, which means that the moles of the former that are consumed by 0.85 moles of the latter are:
[tex]n_{NaOH}=0.85molCl_2*\frac{2molNaOH}{1molCl_2}\\\\n_{ NaOH}=1.7molNaOH[/tex]
Therefore, since we just have 1.23 moles out of 1.70 moles of NaOH, we infer this is the limiting reactant.
Regards!
The information below describes a redox reaction.
Ag+ (aq) + Al(s) — Ag(s) + Al3+ (aq)
Ag+ (aq) + -> Ag(s)
Al(s)->A3+ (aq) + 3e-
What is the coefficient of silver in the final, balanced equation for this reaction?
Answer:
Al°(s) + 3Ag⁺(aq) => Al⁺³(aq) + 3Ag(s)
Explanation:
Oxidation: Al°(s) => Al⁺³(aq) + 3e⁻
Reduction: 3Ag⁺(aq) + 3e⁻ => 3Ag°(s)
_________________________________________
Net Rxn: Al°(s) + 3Ag⁺(aq) => Al⁺³(aq) + 3Ag(s)
One mole of neutral aluminum atoms (Al°(s)) undergo oxidation delivering 3 moles of electrons to 3 moles silver ions (3Ag⁺³(aq)) that are reduced to 3 moles of neutral silver atoms (3Ag°(s)) in basic standard state 25°C; 1atm.
A balanced equation obeys the law of conservation of mass. According to the law of conservation of mass, mass can neither be created nor be destroyed. The coefficient of silver is 3.
What is a balanced equation?A balanced chemical equation can be defined as the chemical equation in which the number of reactants and products on both sides of the equation are equal. The amount of reactants and products on both sides of the equation will be equal in a balanced chemical equation.
The numbers which are used to balance the chemical equation are called the coefficients. The coefficients are the numbers which are added in front of the formula.
The balanced chemical equation for the given redox reaction is given as:
Al (s) + 3 Ag⁺ (aq) → Al³⁺ (aq) + 3Ag (s)
Thus the coefficient of silver is 3.
To know more about balanced equation, visit;
https://brainly.com/question/29769009
#SPJ7
4. Complete the following equations:
CuCl2 + Na2CO3 → 2 NaCl +............
FeSO4 + BaCl2 →
Cu(NO3)2 + CaCO3
Answer:
2NaCl + CuCO3
FeCl2 + BaSO4
CuCO3 + Ca(NO3)2
Explanation:
Presumably this is a double replacement reaction.
A+B + C+D → A+D + C+B
It seems I may be wrong so please try to work out the problem yourself to double check, keeping in mind the charges of each compound.
What's 2+7 hehdhenbeidbnejdbdbdbdi
Answer:
Answer
9......
Explanation:
Explaination:
I need the answer please
Answer:
the answer is the first one
Na+
Define pure substance. How is it classified on the basid of chemical properties?
Answer:
if it is pure, the substances is either an element or a compound. if a substance is not chemically pure, it is either a heterogeneous mixture or a homogeneous mixture. if its composition is uniform throughout, it is a homogeneous.
1) 7.269 moles of oxygen gas are used in combusting butane (C H..). How many moles of carbon dioxide
gas are produced? You must start with a balanced chemical equation. Start with a balanced equation
Explanation:
C4H10 + 13/2O2 ---------> 4CO2 + 5H2O
so u can work out the amount of moles by doing
moles=mass/mr
mr of C4H10 is 12 × 4 + 10 =58
=7.269/58
= 0.125moles
Then u can use the molar ratio which is
6.5:4
0.125 ÷6.5 × 4 = 0.0769moles
hope this helps:)
38. Consider the following equilibrium:
2CO(g) + O2(g) =2CO2
Keg=4.0 x 10-10
What is the value of Key for 2CO2(g) + 2COR + O2g) ?
Answer:
[tex]Key=2.5x10^{-9}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to calculate the equilibrium constant value for the reverse reaction:
[tex]2CO_2(g) \rightleftharpoons 2CO(g) + O_2(g)[/tex]
By knowing that the equilibrium expression is actually:
[tex]Key =\frac{[CO]^2[O_2]}{[CO_2]^2} =\frac{1}{Keg}[/tex]
Thus, we plug in and solve for the inverse of Keq to obtain Key as follows:
[tex]Key =\frac{1}{4.0x10^{-10}}\\\\Key=2.5x10^{-9}[/tex]
Regards!
4) The initial rate of the reaction between substances P and Q was measured in a series of
experiments and the following rate equation was deduced.
rate = k[P]?[Q]
Complete the table of data below for the reaction between P and Q
*Help asap please*
Answer:
The initial rate of the reaction between substances P and Q was measured in a series of
experiments and the following rate equation was deduced.
[tex]rate = k[P]^{2} [Q][/tex]
Complete the table of data below for the reaction between P and Q
Explanation:
Given rate of the reaction is:
[tex]rate= k[P]^{2} [Q]\\=>[Q]=\frac{rate}{k.[P]^{2} } \\and \\\\\\\ [P]=\sqrt{\frac{rate}{k.[Q]} }[/tex]
Substitute the given values in this formulae to get the [P], [Q] and rate values.
From the first row,
the value of k can be calulated:
[tex]k=\frac{rate}{[P]^{2}[Q] } \\ =\frac{4.8*10^-3}{(0.2)^{2} 2. (0.30)} \\ =0.4[/tex]
Second row:
2. Rate value:
[tex]rate =0.4* (0.10)^{2} * (0.10)\\\\ =4.0*10^-3mol.dm^-3.s^-1[/tex]
3.Third row:
[tex][Q]=\frac{rate}{k.[P]^{2} } \\ =9.6*10^-3 / (0.4 *(0.40)^{2} \\ =0.15mol.dm^{-3}[/tex]
4. Fourth row:
[tex][P]=\sqrt{\frac{rate}{k.[Q]} }\\=>[P]=\sqrt{\frac{19.2*10^-3}{0.60*0.4} } \\=>[P]=0.283mol.dm^{-3}[/tex]
This reaction was at equilibrium when 0.2 atm of iodine gas was pumped into the container, what happened to the equilibrium and the partial pressures of the gases
Answer:
Q was < K. Partial pressure of hydrogen decreased, iodine increased
Explanation:
After iodine was added the Q was [Select] K so the reaction shifted toward the Products [Select] ,The partial pressure of hydrogen [Select], Iodine [Select] |,and hydrogen iodide Decreased
Based on the equilibrium:
H2(g) + I2(g) ⇄ 2HI(g)
K of equilibrium is:
K = [HI]² / [H2] [I2]
Where [] are concentrations at equilibrium
And Q is:
Q = [HI]² / [H2] [I2]
Where [] are actual concentrations of the reactants.
When the reaction is in equilibrium, K=Q.
But as [I2] is increased, Q decreases and Q was < K
The only concentration that increases is [I2], doing partial pressure of hydrogen decreased, iodine increased
a) If we have a 4.5 L container of CH 10 gas at a temperature of 178 K and a pressure of 0.50 atm, then how many moles of CaHio do
we have?
b) How many grams of C4H1o do we have?
Answer:
a) 0.15 mol.
b) 8.95 g.
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to infer this problem is solved by using the ideal gas equation:
[tex]PV=nRT[/tex]
And proceed as follows:
a) Here, we solve for the moles, n, as follows:
[tex]n=\frac{PV}{RT} \\\\n=\frac{0.50atm*4.5L}{0.08206\frac{atm*L}{mol*K}*178K} \\\\n=0.15mol[/tex]
b) for the calculation of the mass, we recall the molar mass of butane, 58.12 g/mol, to obtain:
[tex]0.15mol*\frac{58.12g}{1mol} =8.95g[/tex]
Regards!
Which is an example of poor safety practices when working outdoors
Answer:
C
Explanation:
u can't touch a chemical with bare skin
Answer:
touching a chemical with his or her bare skin.
La función de la levadura en quimica
Explanation:
las levaduras son pequeños organismos unicelulares que se alimentan de azúcares simples y los descomponen en dióxido de carbono, alcohol (etanol, específicamente), moléculas de sabor y energía. El proceso se conoce como fermentación.
How to change τhe color of silver mercury to red???
Answer: This is the hue of mercury if you're looking for it. Mercury reacts with sulphur to generate a crimson hue. In the past, they always used a thermometer.
Explanation: However, due of its toxicity, individuals have switched to using alcohol in glass thermometers, which work similarly to mercury thermometers.
hope this helped best of luck mate! :) if this helped make sure to mark me Brainliest!
