8. A mass of 10 Kg is accelerating at 3 m/s2. What is the applied net force?

Answers

Answer 1

Answer:

Explanation:

F = ma

F = (10)(3)

F = 30 N

Answer 2

Answer:

[tex]\boxed {\boxed {\sf 30 \ Newtons}}[/tex]

Explanation:

We are asked to find the applied net force. According to Newton's Second of Law, force is the product of mass and acceleration.

[tex]F= m \times a[/tex]

The object has a mass of 10 kilograms and it is accelerating at 3 meters per second squared.

m= 10 kg a= 3 m/s²

Substitute the known values into the formula.

[tex]F= 10 \ kg \times 3 \ m/s ^2[/tex]

Multiply.

[tex]F= 30 \ kg \times m/s^2[/tex]

1 kilogram meter per second squared is equal to 1 Newton, so our answer of 30 kg × m/s² is equal to 30 N.

[tex]F= 30 \ N[/tex]

The applied net force is 30 Newtons.


Related Questions

During normal beating, the heart creates a maximum 4.10-mV potential across 0.350 m of a person's chest, creating a 1.00-Hz electromagnetic wave. (a) What is the maximum electric field strength created? V/m (b) What is the corresponding maximum magnetic field strength in the electromagnetic wave? T (c) What is the wavelength of the electromagnetic wave?

Answers

Explanation:

Given that,

Maximum potential, V = 4. mV

Distance, d = 0.350 m

Frequency of the wave, f = 100 Hz

(a) The maximum electric field strength created is given by:

[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]

(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]

(c) The wavelength of the electromagnetic wave can be calculated as :

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]

So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].

00
Use base units to check whether the following equations are balance
(a) pressure = depth x density gravitational field strength,
(b) energy = mass x (speed of light).
dod to molt solid

Answers

Answer:

In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus a column of fluid, or an object submerged in the fluid, experiences greater pressure at the bottom of the column than at the top. This difference in pressure results in a net force that tends to accelerate an object upwards.

The pressure at a depth in a fluid of constant density is equal to the pressure of the atmosphere plus the pressure due to the weight of the fluid, or p = p 0 + ρ h g , p = p 0 + ρ h g , 14.4

Granite: 2.70 × 10 32.70 × 10 3

Lead: 1.13 × 10 41.13 × 10 4

Iron: 7.86 × 10 37.86 × 10 3

Oak: 7.10 × 10 27.10 × 10 2

Consider two closely spaced and oppositely charged parallel metal plates. The plates are square with sides of length L and carry charges Q and -Q on their facing surfaces. What is the magnitude of the electric field in the region between the plates

Answers

Answer:

  E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

Explanation:

In this exercise you are asked to calculate the electric field between two plates, the electric field is a vector

         E_ {total} = E₁ + E₂

         E_ {total} = 2 E

where E₁ and E₂ are the fields of each plate, we have used that for the positively charged plate the field is outgoing and for the negatively charged plate the field is incoming, therefore in the space between the plates for a test charge the two fields point in the same direction

to calculate the field created by a plate let's use Gauss's law

          Ф = ∫ E . dA = q_{int} /ε₀

As a Gaussian surface we use a cylinder with the base parallel to the plate, therefore the direction of the electric field and the normal to the surface are parallel, therefore the scalar product is reduced to the algebraic product.

           E 2A = q_{int} / ε₀

where the 2 is due to the surface has two faces

indicate that the surface has a uniform charge for which we can define a surface density

           σ = q_{int} / A

           q_{int} = σ A

we substitute

           E 2A = σ A /ε₀

           E = σ / 2ε₀  

therefore the total field is

           E_ {total} = σ /ε₀

let's substitute the density for the charge of the whole plate

           σ= Q / L²

           

            E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

27. The part of the Earth where life exists .

Mesosphere
Stratosphere
Troposphere
Biosphere

Answers

Answer:

Biosphere is the part of the earth where life exists.

Megan accelerates her skateboard from 0 m/s to 8 m/s in 2 seconds. What is the magnitude of the acceleration of the skateboard?
O 8 m/s^2
O 16 m/s^2
O 2 m/s^2
O 4 m/s^2​

Answers

Answer:

chk picture for eqn

Explanation:

Where is the center of mass of homogeneous body which has a regular ​

Answers

Following the definition of the center of mass, "In physics, the center of mass of a distribution of mass in space is the unique point where the weighted relative position of the distributed mass sums to zero."

(see explanation below)

Flag question
Consider the pressure and force acting on the
dam retaining a reservoir of water. Suppose the
dam is 500-m wide
and the water is 80.0-m
deep at the dam, as illustrated below. What is
the average pressure on the dam due to the
water?​

Answers

Answer:

P = density (p) * g * h

P = 1000  kg/m^3 * 9.8 m/s^2 * 40 m = 392,000 N/m^2

since kg m / s^2 = Newtons

The average pressure is 1/2 (pressure at 0m +  pressure 80 m) for liquid of uniform density

An object moving with a constant
acceleration changes its velocity from
10ms' to 20 ms' in five seconds. What is the
distance travelled in five seconds ​

Answers

Answer:

Acceleration:

[tex]{ \tt{a = \frac{v - u}{t} }} \\ { \tt{a = \frac{20 - 10}{5} }} \\ { \tt{a = 2 \: m {s}^{ - 2} }}[/tex]

From third equation:

[tex]{ \bf{ {v}^{2} = {u}^{2} + 2as}} \\ { \tt{s = \frac{ {20}^{2} - {10}^{2} }{2 \times 2} }} \\ = { \tt{s = 75 \: m}}[/tex]

Answer:

Formula = m/s

Explanation:

The answer is 10 m / 5 seconds = 2 meters distance

The answer is 20 m / 5 seconds = 4 meters distance

Although human beings have been able to fly hundreds of thousands of miles into outer space, getting inside the earth has proven much more difficult. The deepest mines ever drilled are only about 10 miles deep. To illustrate the difficulties associated with such drilling, consider the following: The density of steel is about 7900 kilograms per cubic meter, and its breaking stress, defined as the maximum stress the material can bear without deteriorating, is about 2.0×1092.0×109 pascals. What is the maximum length of a steel cable that can be lowered into a mine? Assume that the magnitude of the acceleration due to gravity remains constant at 9.8 meters per second per second.
Use two significant figures in your answer, expressed in kilometers.

Answers

Answer:

26 km

Explanation:

Let's say our "cable" has a cross section of 1 m²

Then each meter of cable would weight 7900(9.8) = 77420 N

A Pascal is a Newton per square meter

2 x 10⁹ / 77420 = 25840 m or about 26 km or about 16 miles

a coach is travelling east wards at 12.6 m/s after 12 second its velocity is 9.5 m/s in the same direction. what is the acceleration and direction of its acceleration?

pls do it with the formula
thx mates :)​

Answers

Initial velocity=u=12.6m/sFinal velocity=9.5m/sTime=t=12sAcceleration be a

[tex]\\ \rm\longmapsto a=\dfrac{v-u}{t}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{12.6-9.5}{12}[/tex]

[tex]\\ \rm\longmapsto a=\dfrac{3.1}{12}[/tex]

[tex]\\ \rm\longmapsto \overrightarrow{a}=0.25m/s^2[/tex]

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

If the mass of an object is 15 kg and the velocity is -4 m/s, what is the momentum?

Answers

momentum p= m x v = 15 x -4 = -60 N.s

given A=4i-10j and B= 7i+5j find b such that A+bB is a vector pointing along the x-axis (i.e has no y component)​

Answers

Answer:

-4/7

Explanation:

Given the following

A=4i-10j and B= 7i+5j

A+ bB = 4i-10j + (7i+5j)b

A+ bB =  4i-10j + 7ib+5jb

A+ bB =

The vector along the x-axis is expressed as i + 0j

If the vector A+ bB is pointing in the direction of the x-axis then;

[tex]A+ bB * \frac{i+0j}{|i+0j|} = 0 \\ (4+7b)i-(10-5b)j* \frac{i+0j}{\sqrt{1^2+0^2} } = 0\\(4+7b)i-(10-5b)j *(i+0j) = 0\\4+7b-0 =0\\7b=-4\\b = -4/7[/tex]

Hence the value of b is -4/7

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

According to the statement, we have following system of vectorial equations:

[tex]\vec A = 4\,\hat {i} - 10\,\hat{j}[/tex] (1)

[tex]\vec {B} = 7\,\hat{i} + 5\,\hat{j}[/tex] (2)

[tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] (3)

By applying (1) and (2) in (3):

[tex](4\,\hat{i}-10\,\hat{j}) + \beta\cdot (7\,\hat{i}+5\,\hat{j}) = c\,\hat{i}[/tex]

[tex](4+7\cdot \beta)\,\hat{i} +(-10+5\cdot \beta)\,\hat{j} = c\,\hat{i}[/tex]

And we get two scalar equations after analyzing each component:

[tex]4+7\cdot \beta = c[/tex] (4)

[tex]-10+5\cdot \beta = 0[/tex] (5)

We solve for [tex]\beta[/tex] in (5):

[tex]\beta = 2[/tex]

And for [tex]c[/tex] in (4):

[tex]c = 4+7\cdot (2)[/tex]

[tex]c = 18[/tex]

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

Please see this question related to Sum of Vectors for further details: https://brainly.com/question/11881720

Our system is a block attached to a horizontal spring on a frictionless table. The spring has a spring constant of 4.0 N/m and a rest length of 1.0 m, and the block has a mass of 0.25 kg.

Compute the PE when the spring is compressed by 0.50 m.

Answers

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

A gymnast weighs 450 N. She stands on a balance beam of uniform construction which weighs 250 N. The balance beam is 3.0 m long and is supported at each end. If the support force at the right end is four times the force at the left end, how far from the right end is the gymnast

Answers

Answer:

   x = 9.32 cm

Explanation:

For this exercise we have an applied torque and the bar is in equilibrium, which is why we use the endowment equilibrium equation

Suppose the counterclockwise turn is positive, let's set our reference frame at the left end of the bar

          - W l / 2 - W_{child} x + N₂ l = 0

             x = [tex]\frac{-W l/2 + n_2 l}{W_{child}}[/tex]             1)

now let's use the expression for translational equilibrium

         N₁ - W - W_(child) + N₂ = 0

indicate that N₂ = 4 N₁

we substitute

           N₁ - W - W_child + 4 N₁ = 0

           5 N₁ -W - W_{child} = 0

           N₁ = ( W + W_{child}) / 5

         

we calculate

           N₁ = (450 + 250) / 5

          N₁ = 140 N

           

we calculate with equation 1

           x = -250 1.50 + 4 140 3) / 140

           x = 9.32 cm


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

A 2.0 kg puck is at rest on a level table. It is pushed straight north with a constant force of 5N for 1.50 s and then let go. How far does the puck move from rest in 2.25 s?

Answers

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

1 hallar el trabajo mecanico de un cuerpo que tiene una fuerza de 250 newton y recorre 750 metros

2 hallar la potencia necesaria para levantar un transformador de masa 2500kg,una altura de 4 metros en un tiempo de 30 segundos
porfa es para hoy

Answers

Answer: TRACK

Explanation:

A chair of weight 85.0 N lies atop a horizontal floor; the floor is not frictionless. You push on the chair with a force of F = 40.0 N directed at an angle of 35.0deg below the horizontal and the chair slides along the floor.
Using Newton's laws, calculate n, the magnitude of the normal force that the floor exerts on the chair.

Answers

Answer:

 N = 107.94 N

Explanation:

For this exercise we must use Newton's second law.

Let's set a reference system with the x-axis parallel to the ground and the y-axis vertical

X axis

        Fₓ = ma

ej and

       N -F_y - W = 0

let's use trigonometry to decompose the applied force

     cos -35 = Fₓ / F

     sin -35 = F_y / F

     Fₓ = F cos -35

     F_y = F sin -35

     Fₓ = 40.0 cos -35 = 32.766 N

     F_y = 40.0 sin -35 = -22.94 N

we substitute

     N = Fy + W

     N = 22.94 + 85

     N = 107.94 N

A 10 n force is applied horizontally on a box to move it 10 m across a frictionless surface. How much work was done to move the box?

Answers

Given from question
Force = 10 N
Displacement = 10 m
Work done = ?
We know that
Work done = force X displacement
So 10 X 10
100
Work done = 100J answer

Answer:

[tex]\boxed {\boxed {\sf 100 \ J}}[/tex]

Explanation:

We are asked to calculate the work done to move a box.

Work is the product of force and distance or displacement.

[tex]W= F*d[/tex]

A 10 Newton force is applied horizontally on the box. Since the surface is frictionless, there is no force of friction, and the net force is 10 Newtons. The force moves the box 10 meters.

F= 10  N d= 10 m

Substitute the values into the formula.

[tex]W= 10 \ N * 10 \ m[/tex]

Multiply.

[tex]W= 100 \ N*m[/tex]

Let's convert the units. 1 Newton meter is equal to 1 Joule, therefore our answer of 100 Newton meters is equal to 100 Joules.

[tex]W= 100 \ J[/tex]

100 Joules of work was done to move the box.

A 55kg bungee jumper has fallen far enough that her bungee cord is beginning to stretch and resist her downward motion . Find the ( magnitude and direction ) exerted on her by the bungee cord at an instant when her downward acceleration has a magnitude of 7.1m/s2​

Answers

Answer:

148.5 N

Explanation:

Given that,

The mass of a bungee jumper, m = 55 kg

The downward acceleration, a = 7.1 m/s²

We need to find the net force acting on the jumper. As it is moving in downward direction, net force is :

T = m(g-a)

Put all the values,

T = 55(9.8 - 7.1)

= 148.5 N

So, the force exerted on the bungee cord is 148.5  N.

Answer:

The downward force is 148.5 N.

Explanation:

mass, m = 55 kg

downwards acceleration, a = 7.1 m/s^2

Let the force is F.

According to the newton's second law

m g - F = m a

F = m (g - a)

F = 55 (9.8 - 7.1)

F = 148.5 N

A cycle track is 500 metres long. A cyclist completes 10 laps (that is, he rides completely round the track 10 times).
a) How many kilometres has the cyclist travelled?
b) On average it took the cyclist 50 second to complete one lap (that it, to ride round just one).
(i) What was the average speed of the cyclist?
(ii) How long in minutes and seconds dit it take the cyclist to complete the 10 laps?
c) Near the end of the run the cyclist put on a spurt. During this spurt it took the cyclist 2 seconds to increase speed from 8 m/s to 12 m/s. What was the cyclist's acceleration during this spurt?

Answers

Explanation:

a) D_t = 500m*10laps

D_t = 5000m or 5km

b)

I) v = d/t

v = 500m/50s

v = 10m/s

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

c) v_f = v_0 + a*t

v_f-v_0 = a*t

a = (v_f-v_0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

Part(a),

The distance travelled by the cyclist is 5 km.

Part(b),

(i) The average speed is 10 m/s

(ii) The time taken to cover 10 laps is 8 minutes and 20 seconds.

Part(c),

The acceleration is 2 m/s²

What is speed?

Speed is defined as the ratio of the time distance travelled by the body to the time taken by the body to cover the distance. Speed is the ratio of the distance travelled by time. The unit of speed in miles per hour.

a) The distance will be calculated as

D = 500m*10laps

D = 5000m or 5km

b) The average speed is calculated as,

I) v = d/t

v = 500m/the 50s

v = 10m/s

The time will be calculated as,

ii) 10m/s = 5000m/t

t = 5000m/10m/s

t = (500s)*(1min/60s)

t = 8'20" or 8 mins and 20 sec

The acceleration is calculated as,

c) vf = v0 + at

vf-v0 = at

a = (vf-v0)/t

a = (12m/s-8m/s)/2s

a = (4m/s)/2s

a = 2m/s²

To know more about speed and acceleration follow

https://brainly.com/question/14344386

#SPJ2


Physics question plz help ASAP

Answers

The Correct answer is D Hope this helps :)

what is the value of x if x-36=5?​

Answers

Answer:

Therefore, the value of x is 41

Explanation:

x=5+36

x=41

what additional load will be required to cause the extension of 2.0cm when an elastic wire extend by 1.0cm when a load of 20g range from it

Answers

Answer:

The additional load is 20g

what is meant by specific latent heat of vaporization of water is -2.26mjkg^-1 or -2.26mj/kg?​

Answers

Answer:

The specific latent heat of a substance is the amount of energy required to change the state of one kilo of the substance without change in it temperature.The latent heat of vaporization or evaporation is the heat given to some mass to convert if from the liquid to the vapor phase.

A 771.0-kg copper bar is melted in a smelter. The initial temperature of the copper is 300.0 K. How much heat must the smelter produce to completely melt the copper bar? For solid copper, the specific heat is 386 J/kg • K, the heat of fusion is 205 kJ/kg, and the melting point is 1357 K.

Answers

Answer:

4.73 × 10^5

Explanation:

A single force acts on a particle situated on the positive x axis. The torque about the origin is in the negative z direction. The force might be:_______.
A. in the positive y direction
B. in the negative y direction
C. in the positive x direction
D. in the negative x direction

Answers

C maybe don’t count on it 100%

A single force acts on a particle situated on the positive x axis. The torque about the origin is in the negative z direction. The force might be in the negative y direction. Thus, option B is correct.

To determine the force that could generate a torque in the negative z direction, we need to consider the right-hand rule for cross products. The torque vector, denoted by τ, is given by the cross product of the position vector, r, and the force vector, F:

[tex]τ = r × F[/tex]

In this case, the position vector, r, points along the positive x-axis. The negative z-direction torque indicates that the force vector must be perpendicular to both the position vector and the negative z-axis.

Using the right-hand rule, we can determine that the force vector must be in the negative y-direction, which is option B.

Learn more about vector on:

brainly.com/question/16038935

#SPJ2

Liquid plastic is frozen in a physical change that increases its volume. What can be known about the plastic after the change?
(A) Its mass will increase.
(B) Its density will increase.
(C) Its mass will remain the same.
(D) Its density will remain the same.

Answers

Answer:

c

Explanation:

Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same, therefore the correct answer is option C.

What is the matter?

Anything which has mass and occupies space is known as matter ,mainly there are four states of matter solid liquid gases, and plasma.

These different states of matter have different characteristics according to which they vary their volume and shape.

It is known about plastic that its mass will remain the same when liquid plastic is frozen, by increasing its volume.

Liquid plastic is frozen in a physical change that increases its volume,it can be known about the plastic that Its mass will remain the same,  therefore the correct answer is C.

To earn more about the matter here,refer to the link;

brainly.com/question/9402776

#SPJ2

Other Questions
What is 8 - 4(-x + 5) equivalent too? What is the slope of the line?-3-1/31/33 write some uses of magnetic force A car travelling at v kilometers per hour will need a stopping distance, d, in meters without skidding that can be modelled by the function d=0.0067v2+0.15v. Determine the speed at which a car can be travelling to be able to stop within 37m.Im need of serious help! Materials cost per yard: standard, $1.90; actual, $2.04 Standard yards per unit: standard, 4.69 yards; actual, 5.03 yards Units of production: 9,400 Calculate the direct materials price variance. a.$1,316.00 unfavorable b.$6,619.48 unfavorable c.$6,619.48 favorable d.$6,172.04 favorable You want to have $5 million in real dollars in an account when you retire in 20 years.The nominal return on your investment is 10 percent and the inflation rate is 3 percent.What is the real amount you must deposit each year to achieve your goal? What is the answer with explaining GIVING 50 POINTS FOR ANSWER AND BRAINIEST!Read the paragraph.In science class, we like to spy cool things going on in our experiments. We use magnifying glasses to observe tiny growths. I look forward to every class, but it creeps me out when my classmate stares at me while I conduct experiments.Based on the context, which statement best describes the connotations of the underlined words? A. Spy and observe are neutral, and stares is positive. B. Spy is positive, observe is neutral, and stares is negative. C. Spy is neutral, observe is positive, and stares is neutral. D. Spy is positive, observe is negative, and stares is positive. Help me please please help me please YXPls help me youll get 29 points A galaxy that has an undefined shape is best classified as a(n)galaxy. When researchers looked at larger trends in childbearing, they found that peoples childbearing is often affected by Find the special product:(r + 5)^2 Racial socialization in the African American communityA. attempts to hide the realities of being African American in AmericaB. has proven to be ineffectiveC. discourages any sort of preparation for racial discrimination for fear of "shaping" the minds of young childrenD. encourages the teaching of cultural pride and preparation for racial discrimination Find the area of the image below Which pair shows equivalent expressions?O 2x+10=-2(x-5)O-2(x+5)=2x-100 -2x-10=-2(x+5)O -2(x-5)=-2x-10 Many same-sex couples in Canada have children from previous heterosexual relationships, but others choose to have a baby in the context of their same-sex relationship. What options are available in Canada for same-sex couples that wish to start a family? Very important someone help me The media's influence on public opinion is manifested (obvious) by which of the following.A.The ways in which the media neglects political scandals can make people apathetic about politics.B.The ways in which the media reports political events help shape individuals underlying beliefs.C.The ways in which the media interprets or frames events can affect people's opinions about these events.D.The way in which the interpret or frame event can affect people opinions about these events.E.Both the first and second choices. Question:Nearly the entire world uses the metric system for their measurements. The US is one in of three countries that does not use metric. Would you support changing school curriculum to teach the metric system as the primary measurement system in the US? Why or why not.(It must be 3-5 sentences long please) If XZ = 46 and WR = 21, find WX.