6.carbon 14 (14c) is unstable and has a half-life of 5730 years. an organic material buried in sedimentary rocks shows the parent-daughter ratio at 1:15 (meaning 1/16 parent, 15/16 daughter). assuming there was no daughter element at the time of burial, how old is this organic material?

Answers

Answer 1

The time of burial, the organic material will be about 34,880 years old.

What is the half-life of an element?

Half-life (t½) is the time which is required for a quantity of the substance to reduce to the half of its initial value. The term is commonly used in the nuclear physics to describe how quickly the unstable atoms or chemical elements undergo the radioactive decay or how long the stable atoms survive.


The amount of carbon 14 (14C) which can be found in the organic matter decreases due to the radiocarbon process. This process is also called as the radioactive decay. The half-life of carbon-14 (14C) is 5730 years. An organic material which was buried in the sedimentary rocks is examined, and it is the parent-daughter ratio is equal to about 1:15, indicating that there will be 1/16 of the parent element and 15/16 of the daughter element.

The organic material is supposed to have no daughter element at the time of burial. The age of this organic material is to be calculated. As given, the ratio of parent-daughter elements is 1:15 (1/16 parent, 15/16 daughter). After one half-life (i.e., 5730 years), half of the parent atoms will have decayed to the daughter atoms. Therefore, the parent-to-daughter ratio would be 1/32 parent, 31/32 daughter.

After the two half-lives (5730 + 5730 = 11460 years), 1/4 of the original parent atoms will remain, and the ratio will be 1/4 parent, 3/4 daughter. 1/4 is equal to 4/16. 4/16 + 12/16 = 16/16 = 1. This implies that the original amount of carbon 14 (14C) was about 4/16 of what it would have been if there were no daughter material present. To determine the age of the organic material, we may set up the following equation:

Parent to daughter ratio = 1:15 after 2 half-lives,

which is 5730 × 2 = 11,460.15/16 = (1/2)² × (1/16) = 1/64 (15 daughter atoms)

Therefore, there were originally 4 × 15 = 60 carbon 14 (14C) atoms.

1/64 = 1/60 × (1/2)n where n is the number of half-lives which have occurred.

Multiplying both sides by 60 × 64 gives: 1 = 64 × (1/2)n

Subtracting 64 from both sides gives: 63 = (1/2)n

Taking the natural logarithm of both sides gives: ln(-63) = n ln(1/2)

The value of ln(1/2) is -0.69315, so:

n = ln(-63)/ln(1/2)n = 6.0 half-lives have passed (rounded up).

Therefore, the organic material is 6 × 5730 = 34,380 years old.

Learn more about Half-life here:

https://brainly.com/question/24710827

#SPJ11


Related Questions

The idea of __________ asserts that some evolutionary changes may not even involve intermediate forms.
punctuated equilibrium

Answers

The idea of punctuated equilibrium asserts that some evolutionary changes may not even involve intermediate forms.

What is punctuated equilibrium?

The idea of punctuated equilibrium is a theory in evolutionary biology that proposes that most evolutionary changes occur relatively rapidly, with long periods of stability punctuated by rare instances of rapid evolutionary change.

The theory was first introduced by Niles Eldredge and Stephen Jay Gould in 1972 as a challenge to the traditional Darwinian theory of gradualism, which posits that evolution proceeds slowly and steadily over long periods of time.

According to punctuated equilibrium, some evolutionary changes may not even involve intermediate forms.

There are several examples of punctuated equilibrium in the fossil record, including the Cambrian explosion, which saw the sudden appearance of most major animal phyla in a relatively short period of time, and the rapid diversification of mammals following the extinction of the dinosaurs at the end of the Cretaceous period.

Learn more about Punctuated equilibrium here:

brainly.com/question/4430933

#SPJ11

What is the hybridization of the carbon that is attached to the oxygens in CH;COOH (acetic acid)? 4) Which molecule has the greatest dipole moment? A. CCl B. CH,Clz C. CFa D. BrzCClz CH,Fz

Answers

The carbon that is attached to the oxygens in CH₃COOH (acetic acid) is sp2 hybridized. This is because it is attached to three atoms (one oxygen and two hydrogens) and has a trigonal planar geometry.

The molecule with the greatest dipole moment is CH₂Cl₂(dichloromethane) because it has a tetrahedral geometry and the two C-Cl bonds are oriented in opposite directions, creating a net dipole moment. The other molecules (CCl₄, CF₄, and Br₂CCl₂) are all symmetric and have zero dipole moment.

A chemical concept known as hybridization describes the bonding and geometry of molecules. It entails combining atomic orbitals to create hybrid orbitals, which can more accurately capture the bonding in a molecule. The number of hybrid orbitals formed is equal to the number of atomic orbitals combined. Atomic orbitals with similar energy levels are merged to create the hybrid orbitals. An atom's geometry, bond angles, and polarity can all be impacted by hybridization, which can then have an impact on the molecule's reactivity and physical characteristics. Foreseeing the forms and characteristics of molecules as well as explaining their chemical behaviour requires an understanding of atom hybridization.

Learn more about hybridization here:

https://brainly.com/question/30010106

#SPJ4

2. write the mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta.

Answers

Nitration of toluene takes place in four steps which include formation of nitronium ion, formation of electrophile, deprotonation, and elimination of  HNO₃.

What is the mechanism of nitration?

The mechanism for the nitration of toluene showing explicitly why ortho and para products are favored over meta is as follows:

Step 1: Formation of the Nitronium Ion

NO₂⁺ is formed by nitric acid's reaction with sulfuric acid.

2HNO₃ + H₂SO₄ → 2 NO₂⁺ + 2HSO₄⁻ + H₃O⁺

The following is the formation of a nitronium ion:

Step 2: Formation of the electrophile

A nitronium ion is created, which is the electrophile. Because of the strong electron-releasing effect of the methyl group, the nitronium ion is drawn to the ring.

Due to the stability of the resulting carbocation, ortho and para products are favored over meta. In this, the bond on the methyl carbon is broken and the electrophile is added to it:

Step 3: Deprotonation: After the nitration reaction, an intermediate is formed in which a proton has been extracted from the methyl group. The formation of this intermediate indicates that the electrophile has been added to the ring's ortho or para positions.

Step 4: Elimination of HNO₃: An acid base reaction occurs to complete the nitration process, yielding nitrotoluene, HNO₃, and sulfuric acid. Here the intermediate is used to illustrate that the reaction has occurred with the ortho product. This reaction may also result in a para product in a similar manner.

Learn more about Nitration here:

https://brainly.com/question/26927899

#SPJ11

If a substance is removed from a reaction in equilibrium, the equilibrium will shift toward
the side where the concentration was ________.

Answers

If a substance is removed from a reaction in equilibrium, the equilibrium will shift towards the side where the concentration was higher.

What is substance?

A substance is a category of stuff with certain physical and chemical qualities as well as a set or definite composition. A substance might be an element or a compound. A substance made up of atoms with the same atomic number, or the same number of protons in their atomic nuclei, is referred to as an element.

This is known as the Le Chatelier's principle, which holds that a system in equilibrium would react to any stress by trying to counteract the stress and return to equilibrium. When a drug is removed from the reaction mixture, the system is put under stress due to the substance's lower concentration. The balance will change in a way that increases the production of the substance that was eliminated in order to counteract this drop.

To know more about substance, visit:

https://brainly.com/question/24372098

#SPJ1

Can any help with this chemistry question?? I have an exam tomorrow

Answers

Answer:

Explanation:

To calculate the standard enthalpy of formation for TICL(I), we need to use the given thermochemical equations and Hess's law. The equation for the formation of TICL(I) is:

C(s) + TiO₂ (s) + 2Cl(g) → TICL(I) + CO(g)

Using the given equations for the formation of CO(g) and TiO2(s), we can manipulate them to get the necessary reactants for the formation of TICL(I):

Ti(s) + O₂(g) → TiO₂(s) (reverse the equation)

C(s) + 1/2O₂(g) → CO(g) (multiply by 2)

Adding these two equations, we get:

Ti(s) + 2C(s) + O₂(g) → TiO₂(s) + 2CO(g)

This equation is the reverse of the equation given for the formation of TICL(I), so we need to flip its sign to get the correct value for the enthalpy change:

TICL(I) → C(s) + TiO₂ (s) + 2Cl(g) + CO(g)

ΔH° = -(-394 kJ/mol + 286 kJ/mol + 0 + (-221 kJ/mol))

ΔH° = -(-329 kJ/mol)

ΔH° = +329 kJ/mol

Therefore, the correct value for the standard enthalpy of formation for TICL(I) is +329 kJ/mol, which is option D.

) Predict the product for the following reaction. Assume you have an excess of potassium tert-butoxide. (CH3),COK Br

Answers

The potassium tert-butoxide is final product of the reaction is (CH3)3COH.

Why potassium tert-butoxide is (CH3)3COH?

The product for the given reaction is (CH3)3COH.

Reaction: (CH3)3CBr + KOtBu →(CH3)3COH + KBr

Potassium tert-butoxide (KOtBu) is a strong base that can deprotonate hydrogen from (CH3)3COH to form (CH3)3CO-.On the other hand,

(CH3)3CBr is a tertiary halide that can undergo an E2 reaction.

E2 is the abbreviation for bimolecular elimination reactions,

which involve the abstraction of a proton from the adjacent carbon and the removal of the halide anion.

The hydrogen that is abstracted by KOtBu can only come from the carbon that is adjacent to the bromine in (CH3)3CBr, according to Saytzeff's rule, because this is the carbon with the least number of hydrogens.

As a result, an alkene intermediate will be formed.

The KBr salt will be the by-product.

The alkene intermediate, however, is not present in the end product because it is a reactive molecule and quickly reacts with any available hydrogen.

The hydrogen is provided by the KOtBu base.

As a result, the final product of the reaction is (CH3)3COH.

Learn more about potassium tert-butoxide

brainly.com/question/29484874

#SPJ11

which scientist conducted the gold foil experiment and discovered that the atom has a positively charged nucleus?

Answers

Ernest Rutherford, a New Zealand physicist, conducted the gold foil experiment and discovered that the atom has a positively charged nucleus.

In 1911, he conducted an experiment in which he fired alpha particles at a thin sheet of gold foil. The majority of the particles went straight through the gold foil, but a small percentage of the particles bounced back. He discovered that the bouncing back was caused by a small, positively charged nucleus at the center of the atom. Rutherford's experiment was crucial to our understanding of the structure of the atom. Prior to his experiment, the prevailing model of the atom was that it was a solid, indivisible sphere.

However, Rutherford's experiment showed that the atom was mostly empty space, with a positively charged nucleus at its center. This discovery paved the way for future research into atomic structure and helped to lay the foundation for the development of nuclear physics.

For more questions on Ernest Rutherford

https://brainly.com/question/28809146

#SPJ11

vinegar is a solution of acetic acid, hc2h3o2, dissolved in water. a 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m naoh. what is the percent by weight of acetic acid in the vinegar?

Answers

The percent by weight of acetic acid in the vinegar is  3.27% for the given 5.54-g sample of vinegar was neutralized by 30.10 ml of 0.100 m NaOH.

What is the percent of weight of acetic acid?

Vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water. A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH. Find the percentage of acetic acid by weight in vinegar. As per the question, vinegar is a solution of acetic acid, HC₂H₃O₂, dissolved in water.

A 5.54-g sample of vinegar was neutralized by 30.10 mL of 0.100 M NaOH.

Since NaOH and HC₂H₃O₂ reacts in a 1:1 molar ratio, moles of NaOH used = moles of HC₂H₃O₂ in vinegar

So,0.100 mol/L solution of NaOH = 0.100 mol/L solution of HC₂H₃O₂ in vinegar (as they react in 1:1 ratio).

Also, Volume of NaOH = 30.10 mL = 30.10/1000 = 0.0301L

Thus, Amount of HC₂H₃O₂ in vinegar = 0.100 mol/L × 0.0301 L = 0.00301 mol.

Molar mass of HC₂H₃O₂ = 60.05 g/mol.

Weight of HC₂H₃O₂ in 5.54 g vinegar = 0.00301 mol × 60.05 g/mol = 0.18086 g.

Percentage by weight of acetic acid in the vinegar = 0.18086 / 5.54 × 100 = 3.27%.

Read more about moles here:

https://brainly.com/question/15356425

#SPJ11

students conducting research observe the rate of an enzyme-catalyzed reaction under various conditions with a fixed amount of enzyme in each sample. when will increasing the substrate concentration likely result in the greatest increase in the reaction rate?

Answers

Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.

The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.

When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.

So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.

However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.

Learn more about substrate concentration here:

https://brainly.com/question/22428921

#SPJ11

What procedures can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1? A student wants to determine how different factors affect the rate of dissolving solid in water: Trial Size of Particles Rate_of_Dissolving small 10 sec medium 20 sec large 30 sec 2 3 What procedures can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1? A_ the student can increase the pressure B. the student can decrease the pressure C the student can decrease the temperature D. the student can increase the temperature'

Answers

The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.

What is the temperature ?

Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.

To know more about temperature visit:

https://brainly.com/question/11464844

#SPJ1

Tripling the concentration of a reactant increases the rate of a reaction nine times. With this knowledge, answer the following questions: (a) What is the order of the reaction with respect to that reactant?
(b) Increasing the concentration of a reactant by a factor of four increases the rate of a reaction four times. What is the order of the reaction with respect to that reactant?

Answers

Answer:

a) Tripling the concentration of a reactant increases the rate of a reaction nine times.the order of the reaction with respect to that reactant is 2

b)Increasing the concentration of a reactant by a factor of four increases the rate of a reaction four times.the order of the reaction with respect to that reactant is 1.

Explanation:

a) The order of the reaction with respect to that reactant is 2. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

Where k is the rate constant and x, y, and z are the orders of the reaction with respect to the corresponding reactants. When [A] is tripled, the rate increases nine times, indicating that the rate is proportional to [A]^2. Therefore, the order of the reaction with respect to [A] is 2.

b) The order of the reaction with respect to that reactant is 1. The rate law of the reaction with the stoichiometric coefficients a, b, and c would be as follows:

rate = k[A]^x[B]^y[C]^z

When [A] is quadrupled, the rate increases four times, indicating that the rate is proportional to [A]. Therefore, the order of the reaction with respect to [A] is 1.

To know more about concentration of a reactant refer here:https://brainly.com/question/4600091#
#SPJ11

Practice Problem 11.15b Propose an efficient synthesis for the following transformation. y The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. A B с Br2 HBr, ROOR cat. OsO4, NMO D HBr E H2, Pd F H2SO4, H2O, HgSO4 I 1) O3; 2) DMS H 1) xs NaNH2, 2) H20 1) R2BH; 2) H2O2, NaOH Practice Problem 11.18d Propose an efficient synthesis for the following transformation. The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. B с HBr, ROOR 1) O3; 2) DMS Br2, hv F D H2S04, H20, HgSO4 E H2, Lindlar's cat. HC=CNa I G HBr H NaOme 1) R2BH; 2) H2O2, NaOH Practice Problem 11.21a X Incorrect. Propose an efficient synthesis for the following transformation. The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. A B HBr, ROOR HC=CNa 1) R2BH; 2) H2O2, NaOH D HBr E CH3CH2Br H2S04, H2O, HgSO4 G NaOH н conc. H2SO4, heat I 1) LiAlH4; 2) H307 Practice Problem 11.21b Propose an efficient synthesis for the following transformation. :- The transformation above can be performed with some reagent or combination of the reag spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide j B с t-BuOK 1) O3; 2) DMS Br2, hv D H2SO4, H20, HgSO4 E H2, Lindlar's cat. F HC=CNa H HBr, ROOR HBr I 1) R2BH; 2) H202, NaOH Practice Problem 11.21c Propose an efficient synthesis for the following transformation. SOH The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. B с HBr, ROOR HC=CNa 1) R2BH; 2) H202, NaOH F D HBr E CH3CH2Br H2SO4, H20, HgSO4 I G NaOH H conc. H2S04, heat 1) 03; 2) H20 Propose an efficient synthesis for the following transformation. - li The transformation above can be performed with some reagent or combination of the reagents listed below. Give the necessary reagent(s) in the correct order, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. А B HBr conc. H2S04, heat HC=CNa D HBY, ROOR E Hy, Lindlar's cat. 1) O3; 2) DMS G Brą, hv H dilute H2SO4 I H2, Pt Practice Problem 11.25a Propose an efficient synthesis for the following transformation: % Br The transformation above can be performed with some combination of the reagents listed below. Give the necessary reagents in the correct order for each transformation, as a string of letters (without spaces or punctuation, such as "EBF"). If there is more than one correct solution, provide just one answer. А t-BuOK B OsO4, NMO c 1) O3; 2) DMS D H2, Pt E H2, Lindlar's cat F xs HBr I G 1) BH 3.THF; 2) H202, NaOH H MeONa Br2, hv Reagent(s);

Answers

The reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.

What is transformation?

Transformation is the process of changing something into a different form or state. It can involve altering the physical characteristics, behaviors, attitudes, or perceptions of an entity. Transformation is a process that occurs in a variety of contexts including business, education, technology, and personal development.

A) t-BuOK - For the given transformation, the initial step is to add an alkoxide, here t-BuOK, to the starting material.
B) OsO4, NMO - After the addition of the alkoxide, the resulting intermediate has to be oxidized by OsO4 and NMO reagents.
C) 1) O3; 2) DMS - The intermediate then has to be ozonolyzed using ozone and dimethyl sulfide (DMS).
D) H2, Pt - The ozonolysis will result in a mixture of aldehyde and ketone. The aldehyde has to be hydrogenated using H2 and Pt.
E) H2, Lindlar's cat. - The ketone has to be hydrogenated using H2 and Lindlar's catalyst.
F) xs HBr - The product of the hydrogenation has to be converted to a tertiary alcohol by an elimination reaction with HBr.
G) 1) BH3.THF; 2) H202, NaOH - The tertiary alcohol has to be oxidized to a tertiary ketone using BH3.THF, H202 and NaOH.
H) MeONa - The tertiary ketone has to be methylated using MeONa.
I) Br2, hv - The product of the methylation has to be brominated using Br2 and heat.
Therefore, the reagent(s) for the given transformation is "A B C D E F G H I", which is t-BuOK, OsO4, NMO, O3, DMS, H2, Pt, H2, Lindlar's cat., xs HBr, BH3.THF, H202, NaOH, MeONa, Br2, hv.

To learn more about transformation
https://brainly.com/question/382594
#SPJ1

Two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting. Which of the following statements must be true about them as they move closer together? (There could be more than one correct choice.)
a. Their kinetic energy keeps increasing.
b. Their acceleration keeps decreasing.
c. Their kinetic energy keeps decreasing.
d. Their electric potential energy keeps decreasing.
e. Their electric potential energy keeps increasing.

Answers

When two protons are fired toward each other in a particle accelerator, with only the electrostatic force acting, then their kinetic energy keeps increasing, acceleration keeps decreasing, kinetic energy keeps decreasing, electric potential energy keeps decreasing.

How does the electrostatic force act?

The electrostatic force is a force that arises between electrically charged objects. It is the force exerted on a charged particle by other charged particles or electromagnetic fields. It is a fundamental force in nature that has an infinite range and can be either attractive or repulsive. The strength of the electrostatic force is proportional to the inverse square of the distance between the charged particles. As two charged particles move closer together, the force between them increases. Therefore, as the two protons move closer together, their kinetic energy and electric potential energy will increase.

According to Coulomb's law, the electrostatic force is inversely proportional to the square of the distance between the two charges. Therefore, as the distance between the two protons decreases, the electrostatic force acting between them will increase. As a result, their acceleration will keep decreasing. At the same time, as the protons move closer together, their kinetic energy will keep increasing while their electric potential energy will keep decreasing.

Learn more about Electrostatic force here:

https://brainly.com/question/9774180

#SPJ11

Now let's try one without any help from the simulation. Write a balanced chemical equation for the combustion reaction of ethane gas (C2H6) and oxygen gas (O2), then answer the following questions:(o) How many moles of carbon dioxide are produced from the combustion of 6.20 moles of ethane gas? (You may assume you have an excess of oxygen gas)(p) How many moles of carbon dioxide are produced from the combustion of 3.92 moles of oxygen gas? (You may assume you have an excess of ethane gas)(q) How many moles of carbon dioxide are produced from the combustion of 6.20 moles of ethane gas with 3.92 moles of oxygen gas?(r) How much excess reactant remains after the reaction described in (q)?(s) How much excess reactant remains after the combustion of 6.10 moles of ethane gas with 5.69 moles of oxygen gas?

Answers

The reaction is given by:C2H6(g) + 3O2(g) → 2CO2(g) + 3H2O(g), o) From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.  3.92 moles of oxygen gas will react with (1/3) × 3.92 = 1.307 moles of ethane gas. This will produce 1.307 × 2 = 2.614 moles of carbon dioxide gas. q) 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas.r) This means that all the oxygen gas will be consumed in the reaction. Therefore, there will be no excess oxygen gas remaining after the reaction. s) 4.203 moles of ethane gas will be in excess after the reaction.

The equation is now balanced as there are equal numbers of each type of atom on both sides of the equation. 6.20 moles of ethane gas will react with 6.20 × 3 = 18.60 moles of oxygen gas. This will produce 6.20 × 2 = 12.40 moles of carbon dioxide gas. From the balanced chemical equation, we can see that 3 moles of oxygen gas react with 1 mole of ethane gas to produce 2 moles of carbon dioxide gas. Therefore From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas.

From the balanced chemical equation, we can see that 1 mole of ethane gas reacts with 3 moles of oxygen gas to produce 2 moles of carbon dioxide gas. Therefore, 5.69 moles of oxygen gas will react with (1/3) × 5.69 = 1.897 moles of ethane gas. This will produce 1.897 × 2 = 3.794 moles of carbon dioxide gas. This means that 6.10 − 1.897 = 4.203 moles of ethane gas will be in excess after the reaction.

To know more about carbon dioxide gas visit:-

https://brainly.com/question/30615378

#SPJ11

what is BEFORE and AFTER when you put the baking soda in vinegar?​

Answers

When you mix baking soda and vinegar, a chemical reaction occurs that produces carbon dioxide gas, water, and a type of salt called sodium acetate.

What happens at the mixing of baking soda in vinegar?​

Before: Before mixing baking soda and vinegar, they are both in their separate states. Baking soda is a white powder, and vinegar is a clear liquid.

During: When you mix the baking soda and vinegar, the baking soda (sodium bicarbonate) reacts with the vinegar (acetic acid) to produce carbon dioxide gas (CO2), water (H2O), and sodium acetate (NaC2H3O2).

After: After the chemical reaction has taken place, you will see bubbles of carbon dioxide gas being released. The solution will also become cloudy as the sodium acetate precipitates out. The resulting mixture may feel warmer due to the exothermic nature of the reaction (meaning it releases heat).

Learn more about baking soda in vinegar:https://brainly.com/question/2427021

#SPJ1

If 50 grams of water are saturated at 90°C with potassium nitrate and then cooled to 40°C, how much will precipitate?

Answers

Answer:

43.1gramms

Explanation:

change the temperatures to kelvin

90--363

40--313

50grams of water are saturated at 90 degree celcius.

then,

50___363

x_____313

then cross multiply

363x=15650

divide both sides by 363

x=43.1gramms

A 0.598 g sample of a green metal carbonate, containing unknown metal M, was heated to give the metal oxide and 0.222 g of CO2 (g) according to the reaction below. MCO3(s) + MO(s) + CO2(g) What is the metal M? Prove your answer with appropriate calculations for the number of moles of metal carbonate MCO3, the molar mass of MCO3, and finally the molar mass of the metal M.

Answers

The green metal carbonate is decomposed according to the given equation: MCO₃(s) → MO(s) + CO₂(g)

What is molar mass of MCO₃?

The number of moles of CO₂(g) produced can be used to determine the number of moles of the green metal carbonate (MCO₃) that decomposed.0.222 g of CO₂ (g) represents 1 mol of CO₂ (g), since its molar mass is 44 g/mol.

Therefore,1 mol of MCO₃ will produce 1 mol of CO₂ (g) in the reaction. So, 0.222 g of CO₂ (g) corresponds to 1 mol of MCO₃.

Hence, the number of moles of MCO₃ is:

moles of MCO₃= mass/Molar

mass= 0.598 g/Molar mass of MCO₃

The molar mass of MCO₃ can be calculated using the following:

mass percent of MCO₃ = [(mass of M)/(molar mass of M)] × 100%molar mass of MCO₃ = mass of MCO₃/moles of MCO₃

By substituting the value of moles of MCO₃ and the mass of MCO₃ into the equation above, the molar mass of MCO₃ can be calculated.

molar mass of MCO₃= (mass of MCO₃) / (moles of MCO₃)

Finally, to determine the molar mass of metal M, subtract the molar mass of CO3 from the molar mass of MCO₃.

MCO₃ = 12.011 + 3(15.999) + M(55.845)

= 181.76 + 55.845MM

= 55.845 - 60.01MM

= -4.165

The molar mass of the metal M is 4.165 g/mol.

To summarize, the metal M is sodium (Na) and its molar mass is 4.165 g/mol.

To know more about molar mass:

brainly.com/question/23058220

#SPJ11

How would the Rf of eugenol increase or decrease if you ran your TLC plate in 40% ethyl acetate in hexanes? a.The Rf value would increase. b. The Rf value would decrease.c. The Rf would remain the same.

Answers

Answer: B (The Rf value would decrease)

Explanation:

The Rf (retention factor) value is a ratio of the distance traveled by the compound to the distance traveled by the solvent front in thin-layer chromatography (TLC). The polarity of the solvent affects the Rf value of a compound.

In general, if a more polar solvent is used in TLC, the Rf value of a compound will decrease, and if a less polar solvent is used, the Rf value will increase.

In this case, using 40% ethyl acetate in hexanes means using a more polar solvent compared to a pure hexanes solvent. As eugenol is a moderately polar compound, the increased polarity of the solvent will likely result in a decrease in the Rf value.

Therefore, the correct answer is b. The Rf value would decrease.

The Chernobyl nuclear disaster led to the release of massive radiation, specifically iodine-131 and cesium-137, which has been connected to a variety of environmental problems in the 30 years following the disaster. A meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation?
Cooling tower
Turbine
Generator
Reactor core
Reactor core

Answers

Answer:

The meltdown in which of the following structures at a nuclear power plant, such as Chernobyl, would most likely lead to the accidental release of radiation is reactor core. Answer:e

Explanation:

What is the Chernobyl nuclear disaster?

The Chernobyl nuclear disaster was a catastrophic nuclear accident that occurred on April 26, 1986, at the No. 4 reactor in the Chernobyl Nuclear Power Plant, located in the northern Ukrainian Soviet Socialist Republic.

The explosion and subsequent fires resulted in the release of significant amounts of radioactive material into the atmosphere, as well as widespread contamination of the environment.

What was the cause of the Chernobyl nuclear disaster?

During a reactor systems test, an unforeseen combination of factors caused the core of one of Chernobyl's reactors to overheat and explode, releasing radioactive material into the surrounding area. The resulting steam explosion and fires killed two plant workers at the time of the accident and injured hundreds of others.

The explosion also resulted in the deaths of dozens of firefighters and other emergency workers in the aftermath of the disaster.

What was the impact of the Chernobyl nuclear disaster on the environment?

The Chernobyl nuclear disaster resulted in the release of significant quantities of radioactive material, including iodine-131 and cesium-137, which have been linked to a variety of environmental issues. These substances are still present in the environment, and their long-term effects on humans and wildlife are still being investigated.

However, the disaster has had a significant impact on the environment in the years following the accident, including the contamination of water and soil, the displacement of wildlife, and the potential long-term health effects on local populations.

To know more about Chernobyl nuclear disaster refer here:https://brainly.com/question/10116000#
#SPJ11

Which of the following molecules would have the highest boiling point?
a) hexane
b) octane
c) 2-propylpentane
d) 2-methylhexane

Answers

The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.

What is boiling point?

The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.

The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.

Therefore, the correct option is D.

Learn more about Boiling point here:

https://brainly.com/question/25777663

#SPJ11

57.0 ml of 0.90 m solution of hcl was diluted by water. the ph of this diluted solution is 0.90. how much water was added to the original solution insert your answer rounded to 3 significant figure.

Answers

57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .

There are a few steps to solve this.

Here they are: First, calculate the initial concentration of HCl in the solution.

Molarity = moles of solute / volume of solution in liters.

The volume of the solution is 57.0 mL, which is 0.0570 L.

The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L

Now we can solve for moles of HCl:

moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol

Next, we need to use the pH to find the concentration of H+ ions.

pH = -log[H+]0.90 = -log[H+]

Solving for [H+],

we get:[H+] = 7.94 x 10^-1 M

Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol

Solving for V,

we get: V = 6.47 x 10^-2 L

To find how much water was added,

we subtract the final volume from the initial volume:

Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)

Therefore, 50.5 mL of water was added to the original solution.

For more such questions on pH , Visit:

https://brainly.com/question/172153

#SPJ11

If a solid piece of shiny sodium metal is exposed to chlorine gas, a large amount of heat is released and the white solid sodium chloride (table salt) forms. Based on this information, which of the following statements is TRUE? A) This process was exothermic_ B) This process represents a physical change: C) Mass is lost during this process_ D) This process was endothermic_

Answers

Option A is the correct statement for the process was exothermic that a large amount of heat is released when sodium metal is exposed to chlorine gas.

What happens when sodium is exposed to chlorine? Sodium metal reacts with chlorine gas to produce sodium chloride. When solid shiny sodium metal is exposed to chlorine gas, a large amount of heat is generated, and the white solid sodium chloride (table salt) is formed. So the process is an exothermic reaction.A chemical reaction in which heat is given out, such as the one between sodium and chlorine, is exothermic. When the products' energy is less than the reactants' energy, energy is given out from the system into the surroundings, resulting in an increase in temperature in the surroundings. Therefore, this process was an exothermic and the correct option is 'A'.

Learn more about sodium chloride: https://brainly.com/question/28106660

#SPJ11

what is the function of the electron transport chain in cellular respiration ?

Answers

The electron transport chain (ETC) is an essential part of cellular respiration, which is a series of molecules that transfer electrons from one molecule to another used by cells to convert nutrients into energy.

This starts with the oxidation of molecules such as glucose, which releases electrons that are then transferred to a series of electron carriers in the ETC. The electron carriers are molecules that hold the electrons and can transfer them to other molecules which is known as redox reactions. As the electrons move through the ETC, they release energy which is used to form a proton gradient that is then used to drive the synthesis of ATP, the energy currency of the cell. The ETC is an essential part of cellular respiration as it is the process responsible for generating the energy necessary for cells to function.

To learn more about electron click here https://brainly.com/question/28977387

#SPJ4

The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out, is known as: select the correct answer below: - shielding - deflecting - building up - converging

Answers

The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out is known as Shielding.

Electrons in an atom are negatively charged particles, and they are attracted to the positively charged nucleus. However, the outer electrons of an atom are also repelled by the inner electrons that are closer to the nucleus. This repulsion is due to the negative charges of the electrons, and it partially cancels out the attraction of the nucleus for the outer electrons.

Shielding is the phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out. This makes it possible for electrons in higher energy levels to be farther from the nucleus, so they are less strongly attracted and easier to remove.

Learn more about Shielding here: https://brainly.com/question/27985711

#SPJ11

in which case the reaction in the gas mixture will proceed nonspontaneously in the forward direction?

Answers

The reaction in the gas mixture will proceed non-spontaneously in the forward direction when the standard free energy change (∆G°) is positive or zero.

What is spontaneous reaction?

In chemical reactions, the term spontaneity refers to whether the reaction proceeds on its own or requires an input of energy to occur. When ∆G° is negative, a reaction is said to be spontaneous in the forward direction, meaning it occurs naturally without any external input of energy. When ∆G° is positive or zero, on the other hand, the reaction proceeds nonspontaneously in the forward direction.

In other words, the reaction requires energy input to proceed. The free energy change (∆G) of a reaction is related to its standard free energy change (∆G°) through the equation:

∆G = ∆G° + RT ln(Q)

where, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.

If Q = 1, the reaction is at equilibrium and ∆G = ∆G°. If Q < 1, the reaction proceeds spontaneously in the forward direction (∆G < 0), and if Q > 1, the reaction proceeds spontaneously in the reverse direction (∆G > 0).

Learn more about Spontaneous reaction here:

https://brainly.com/question/13790391


#SPJ11

20pcm3 og a gas has a pressure of 510mmhg what will be the volume of the pressure is increased to 780mmhg, assuming there is no change in temperature​

Answers

The volume of the gas will decrease from 20 cm³ to 13.08 cm³.

What is Boyle's law?

Boyle's law is a gas law that states that the product of the pressure and volume of a gas is constant at constant temperature.

What is the significance of assuming no change in temperature in this problem?

Assuming no change in temperature is significant because it allows us to apply Boyle's law to solve the problem. If the temperature were to change, we would need to use a different gas law, such as Charles's law or the combined gas law, to account for the change in temperature.

We can use Boyle's law to solve this problem, which states that the product of the pressure and volume of a gas is constant at constant temperature. Mathematically, we can express this as P₁V₁ = P₂V₂, where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.

Using this equation, we can solve for V₂:

P₁V₁ = P₂V₂

V₂ = (P₁V₁)/P₂

Substituting the given values, we get:

V₂ = (510 mmHg x 20 cm³) / 780 mmHg

V₂ = 13.08 cm³

Therefore, if the pressure is increased from 510 mmHg to 780 mmHg at constant temperature, the volume of the gas will decrease from 20 cm³ to 13.08 cm³.

Learn more about Boyle's law here:

https://brainly.com/question/30367133

#SPJ1

TRUE OR FALSE: THE LIMITING REAGENT CONTROLS A REACTION’S THEORETICAL YIELD, BUT A NUMBER OF SIDE REACTIONS MAY ALSO OCCUR, CAUSING THE ACTUAL YIELD TO VARY.

Answers

Answer:

True. The limiting reagent is the reactant that is completely consumed in a chemical reaction and limits the amount of product that can be formed. The theoretical yield is the maximum amount of product that can be obtained from the limiting reagent, assuming that the reaction goes to completion and no side reactions occur. However, in practice, it is common for side reactions to occur, which can reduce the actual yield of the product. Therefore, while the limiting reagent does control the theoretical yield of a reaction, the actual yield may vary due to the presence of side reactions or other factors that can affect the efficiency of the reaction.

Explanation:

Electrons that inhabit different orbitals must have a different value for the:
a. principal quantum number
b. angular momentum quantum number
c. spin quantum number
d. none of the above

Answers

Answer:

D

Explanation:

I had this question before :)

Does electronegativity increase as atomic radius increases?

Answers

Actually, when atomic radius grows, electronegativity often decreases.

The capacity of an atom to draw electrons into a chemical connection is known as electronegativity. The separation between the nucleus and the farthest electrons grows with increasing atomic radius. As a result, the nucleus's attraction to the electrons is reduced, making it more challenging for the atom to draw electrons to itself. The electronegativity values of bigger atoms are therefore often lower than those of smaller ones. Despite this general tendency, there are certain outliers since electronegativity also depends on other elements including nuclear charge and electron configuration. For instance, the rising nuclear charge in halogens causes the electronegativity to rise as the atomic radius falls.

learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ4

What is the purpose of the one balloon larger in size than the other balloons? o to represent unoccupied space in a molecule to represent any pair of electrons - bonding or lone pair to represent the space lone pairs occupy in a molecule Submit Request Answer

Answers

The balloon that is one size larger than the others serves to symbolise the area in a molecule inhabited by lone pairs of electrons, signifying unshared electron pairs in a particular region.

The Lewis structure is a chemical model that depicts how atoms and valence electrons are arranged in a molecule. The atoms are represented by symbols, and the valence electrons, which are the electrons at the highest energy level, are shown as dots or lines. In organic chemistry, the bigger balloon often designates a region of a molecule where electrons are not shared with any other atoms or groups. The structure and reactivity of the molecule are impacted by this region, which is referred to as a lone pair. The wider balloon makes it easier to see where these unshared electron pairs are located and how they affect the molecule's overall structure and behaviour.

learn more about lone pairs here:

https://brainly.com/question/30886923

#SPJ4

Other Questions
How do you write 0.048 as a percentage?Write your answer using a percent sign (%). _______ is a phenomenon in which exposure to inescapable and uncontrollable aversive events produces passive behavior. Which of the following statements related to critical or semi-critical, or non-critical patient-care items is correct?A. Heat tolerant critical and semi-critical items must be sterilized by steam, unsaturated chemical vapor, or dry heat.B. Heat-sensitive critical items can be sterilized by ethylene oxide or by immersing them in liquid chemical germicides registered by the FDA as chemical sterilants.C. Non-critical items, when visibly soiled, must be disinfected with an EPA-registered hospital level intermediate-level disinfectant.D. All of the above are correct. formal letter to step down in position in one cycle a heat engine absorbs 480 j from a high-temperature reservoir and expels 320 j to a low-temperature reservoir. if the efficiency of this engine is 56% of the efficiency of a carnot engine, what is the ratio of the low temperature to the high temperature in the carnot engine? Which of the following is true about control charts?Group of answer choicesa. As the sigma level (Z) for a control chart increases, the UCL and LCL get closer togetherb. As the sigma level (Z) for a control chart increases, the LCL and UCL get farther apartc. Sigma levels (Z) have no effect on the UCL or LCLd. Sigma levels (Z) cannot be changede. As the sigma level (Z) for a control chart increases, the process becomes more capable of meeting a customer's specification Why did the Iran Contra scandal happen? aint I woman? Then that little man in black there, he says women cant have as much rights as men, cause Christ wasnt a woman! Where did your Christ come from? From God and a woman! Man had nothing to do with Him.Truth presents counter-argument in which she opposes the claims of the man over there . What are his claims? What logical appeal does she present to counter him? Find the value of x in the following diagram.Round your answer to the nearest hundredth. FILL IN THE BLANK. the atmosphere is____when the environmental lapse rate is equal to the dry adiabatic lapse rates for the unsaturated air. circumstances under which pr professionals need to be careful not to defame a person's character include: Select all of the registers listed below that are changed during EVALUATE ADDRESS step of an LC-3 LDR instruction. Select NONE if none of the listed registered are changed.a. PCb. NONEc. MDRd. DST registere. MARf. IR In the context of research evidence from the study conducted by Williams and McCririe, which of the following operates when a person picks up information critical to catching an objectboth central and peripheral vision Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program.JDoe1. Line 1 print (answer) 2. Line 2 return strFirst[0] + strLast 3. Line 3 def username (strFirst, strLast): 4. Line 4 answer = username ('Joann', 'Doe') when purchasing for a franchised operation, the franchisee will: group of answer choices buy from approved suppliers buy from the company commissary or central distribution center all of the above buy from any suppliers that meet the quality standards who was the first female pilot to complete a solo transatlantic fight? A sector subtends an angle of 42 at the centre of a circle of radius 2.8 cm. Calculate the perimeter of the sector. For your assignment, you will write a college admissions essay or a letter to a future employer using the Sandwich Method. Select one of these three topics for your essay/letter:Recount an incident or time when you experienced failure. How did it affect you, and what lessons did you learn?Reflect on a time when you challenged a belief or idea. What prompted you to act? Would you make the same decision again?Discuss an accomplishment or event, formal or informal, that marked your transition from childhood to adulthood within your culture, community, or family.Your essay should have three paragraphs. Each paragraph should have four-six sentences. Solve for x and graph the solution on the number line below in the extended is-lm model. when x increases leading to a decrease in output, which one is a better policy tool? fiscal or monetary policy? why?