40.0 g of ice cubes at 0.0°C are combined with 150. g of liquid water at 20.0°C in a coffee cup calorimeter. Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)Calculate the final temperature reached, assuming no heat loss or gain from the surroundings. (Data: specific heat capacity of H2O(l), c = 4.18 J/g×°C; H2O(s) => H2O(l) DH = 6.02 kJ/mol)

Answer:

The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.

But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.

Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.

I hope this helps have a great day :)

Answer:

1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.

2. It is a controlled experiment.

Explanation:

In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .

Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.

A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.

Thus, based on the independent variable, the responding variable, or dependent variable, alters.

To learn more about independent variable, follow the link;

https://brainly.com/question/967776

#SPJ2

Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.

First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pH + pOH= 14

In this case, being pOH= 9.50, pH is calculated as:

pH + 9.40= 14

pH= 14 - 9.50

pH= 4.50

Replacing in the definition of pH the concentration of H⁺ ions is obtained:

- log [H⁺]= 4.50

Solving :

[H⁺]= 10⁻⁴ ⁵

[H⁺]= 3.16×10⁻⁵ M

The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.

In this case, the pH has a value of 4.50. So, the solution is acidic.

In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.  

Learn more:

Answer:

0.86

Explanation:

1mol of Zn has mass of 65.39g.The amount of Zn is 2.5g65.39g/mol=0.038mol.

The amount of H2 produced is the same as the amount of Zn consumed (0.038mol).

1mol of ideal gas will occupy 22.4L at STP.

The H2 will occupy 0.038mol×22.4L/mol=0.86L

.

Explanation:

BaF2(s) <------> Ba2+(aq) + 2F-(aq)

Ksp BaF2 =  1.0 x 10^-6.

Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium

When Qsp >Ksp, BaF2 will precipitate

Qsp = [Ba2+(aq)]×[F-(aq)]^2

[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.

0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6

[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6

[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6

[F- (aq)] > 9.05 × 10^-3 moldm-3

So F- concentration should be more than 9.05 × 10^-3 moldm-3

Answer:

i dont speak mexican

Explanation:

Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.

Using Hess's law we found:

1) By adding reaction 10.2 with the reverse of reaction 10.1 we get reaction 10.3:

KOH(aq) + HCl(aq)  → H₂O(l) + KCl(aq)   ΔH  (10.3)

2) The ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy (ΔH).    

The reactions of dissolution (10.1) and neutralization (10.2) are:

KOH(s) → KOH(aq)   ΔHsoln    (10.1)

KOH(s) + HCl(aq) → H₂O(l) + KCl(aq)     ΔHneut     (10.2)

1) According to Hess's law, the total change in enthalpy of a reaction resulting from differents changes in various reactions can be calculated as the sum of all the enthalpies of all those reactions.      

Hence, to get reaction 10.3:

KOH(aq) + HCl(aq) → H₂O(l) + KCl(aq)    (10.3)

We need to add reaction 10.2 to the reverse of reaction 10.1

KOH(s) + HCl(aq) + KOH(aq) → H₂O(l) + KCl(aq) + KOH(s)

Canceling the KOH(s) from both sides, we get reaction 10.3:

KOH(aq) + HCl(aq)  → H₂O(l) + KCl(aq)    (10.3)

2) The change in enthalpy for reaction 10.3 can be calculated as the sum of the enthalpies ΔHsoln and ΔHneut:

[tex] \Delta H = \Delta H_{soln} + \Delta H_{neut} [/tex]

The enthalpy of reaction 10.1 (ΔHsoln) changed its sign when we reversed reaction 10.1, so:

[tex] \Delta H = \Delta H_{neut} - \Delta H_{soln} [/tex]

Therefore, the ΔHsoln must be subtracted from ΔHneut to get the total change in enthalpy ΔH.

Learn more here:

I hope it helps you!

The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L

We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:

Mass of NaOH = 72.2 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mole = mass / molar mass

Mole of NaOH = 72.2 / 40

2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted with 1 mole of H₂SO₄.

Therefore,

1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.

Mole of H₂SO₄ = 0.9025 mole

Molarity of H₂SO₄ = 0.170 M

Volume = mole / Molarity

Volume of H₂SO₄ = 0.9025 / 0.170

Thus, the volume of H₂SO₄ needed for the reaction is 5.31 L

Learn more: https://brainly.com/question/14356462

Answer:

1.345.0

Explanation:

Hope this helpssss

Answer:

dog dog im not gon hold u we kinda screwed

Answer:The plates are not fixed but are constantly moving atop a layer of solid and molten rock called the mantle. The Ring of Fire is a string of volcanoes and sites of seismic activity, or earthquakes, around the edges of the Pacific Ocean. ... A hotspot is a place in the middle of a tectonic plate where hot magma rises.

Explanation:

Answer:

the small intestine where nutrients are absorbed.

Answer:

Every germanium atom is tetrahedrally linked to four sulphur atoms, with an interatomic distance of 2.19A. The angle between the two sulphur bonds is 103°.

hope this helps

An interatomic distance of 2.19A exists between each germanium atom and the four sulphur atoms that are tetrahedrally connected to it. The two sulphur bonds form a 103° angle.

A complex molecule's or ion's bond angle is the angle between the two bonds, or the angle between two orbitals that contain bonding electron pairs surrounding the central atom. It is determined using a spectroscopic approach and measured in degrees.

Any angle between two bonds that share an atom is known as a bond angle, and it is often measured in degrees. The distance along the straight line between the nuclei of two bound atoms is known as a bond distance.

Bond angles also have a role on a molecule's structure. The angles between neighboring lines that form bonds are known as bond angles. The difference between linear, trigonal planar, tetrahedral, trigonal-bipyramidal, and octahedral crystals may be determined by the bond angle.

Thus,  The two sulphur bonds form a 103° angle.

To learn more about bond angle, follow the link;

https://brainly.com/question/14089750

#SPJ2

Answer:

the lowest point of the wave is called Trough

Answer:

Trough is the correct answer

Explanation:

The highest part of the wave is called the crest. The lowest part is called the trough.

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

Answer: The following information should be included;

What is the difference between the greenhouse effect, climate change and global warming?

What proof do we have that climate change is happening?

Why is it happening?

Answer:

A mixture of chlorine gas (Cl2) and fluorine gas (F2):

✔ London dispersion forces

Explanation:

Explanation:

a+b =ab

answer

ab added all

is give answer

Answer:

100.0

Explanation:

Have a great day god bless

Answer:

Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O

The reactants are present in equimolar amounts, so there is no excess or limiting reactants.

(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O

(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J

(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O

Explanation:

Explanation:

the investigation lasts for 7 days.

hope this helps you.

Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.

According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.

The average speed of gas molecules depends on temperature and molar mass as shown by the relation;

vrms = √3RT/M

The following statement are true among the options provided;

The following are false among the options provided;

Learn more: https://brainly.com/question/6505878

52

Explanation:

70x45÷60= 52

I hope this is helpful

As the solar nebula cooled METAL compounds are the first to condense from a gas to a solid. The solar nebula gave birth to the Solar system.

A solar nebula is a disc-shaped cloud of gases and grain dust, which gave birth to the Sun and planets of the Solar system, approximately 4.6 billion years ago.

The solar nebula is at the beginning a mixture of interstellar gases (hydrogen and helium) and dust grains.

As the solar nebula cools, heavy elements such as metals in the disk condensate into planetesimals.

Learn more in:

https://brainly.com/question/14151385

Yes according to reliable sources.

Answer:

Ionization enthalpy

Explanation:

that should be right

This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.

In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:

[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]

Next, we calculate the masses by using each metal's atomic mass:

[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]

Thus, the mass percent composition of each metal is shown below:

[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]

So that of lead is 34.9 %.

Learn more: