40 POINTS!
Answer correctly for full 40!

Answer:

if this doesnt help then im sorry...

Explanation:

When light is shined on certain metals, electrons may be knocked off the metal. This is called the photoelectric effect. By assuming that light is quantized, Einstein was able to explain the photoelectric effect. ... When UV light of a long wavelength and low frequency is shined on the zinc nothing happens.

Ah yay! Something I can answer.

Answer:

When UV light is shined upon certain metals something called the photoelectric effect occurs. The photoelectic effect is when electrons are discharged from the metal.

Explanation:

Metals contain many electrons and when the electrons are given enough energy they can leave the metal. The electrons that escape the metal are called photoelectrons; hence why this effect is called the photoelectic effect.

Answer:B

Explanation:

Answer:The answer to this question comes from experiments done by the scientist Robert Boyle in an effort to improve air pumps. In the 1600's, Boyle measured the volumes of gases at different pressures. Boyle found that when the pressure of gas at a constant temperature is increased, the volume of the gas decreases. when the pressure of gas is decreased, the volume increases. this relationship between pressure and volume is called Boyle's law.

Explanation: So, at constant temperature, the answer to your answer is: the volume decreases in the same ratio as the ratio of pressure increases.

BUT, in general, there is not a single answer to your question. It depend by the context.

For example, if you put the gas in a rigid steel tank (volume is constant), you can heat the gas, so provoking a pressure increase. But you won't get any change in volume.

Or, if you heat the gas in a partially elastic vessel (as a tire or a soccer ball) you will get both an increase of volume AND an increase of pressure.

FINALLY if you inflate a bubblegum ball, the volume will be increased without any change in pressure and temperature, because you have increased the NUMBER of molecules in the balloon.

There are many other ways to change volume and pressure of a gas that are different from the Boyle experiment.

Answer:

Depends on others to function

Explanation:

Answer:

See explaination

Explanation:

Balanced net ionic reaction.

Pb(s) + Cl2(g) ----- Pb2+ + 2Cl-

oxidation reaction :Pb(s) --- Pb2+ + 2e-

Reduction reaction:Cl2 + 2e- -----Cl-

Answer: from the hotter surface to the colder one

Explanation:

Answer:d

d

Explanation:

Answer:

Kindly check the attachment for the diagram representing the cell and showing all necessary components including: anode, cathode, electron flow, cation flow and anion flow.

Explanation:

So, the reaction in the concentration cell is given below as;

Cu2+(1.00 M) → Cu2+(0.0100 M).--(1).

The anode = Cu2+(0.0100 M) because it has lesser Concentration, thus, lesser potential value.

Cathode = Cu2+(1.00 M) because it has higher Concentration, hence higher potential value.

It must be noted that in the digaram depicting the Reaction, the electrons moves from the anode part of the cell to the cathode part of the cell and this is done through an external circuit. The following are the things that happens at each electrode;

At the Anode: in here is where oxidation occurs and Cu^2+ is released into the solution.

At the cathode: in here is where the reduction occur and the Cu^2+ moves in the direction to where the Cu electrode is, thus, causing the deposition of Cu.

Answer:

If you have 67.31 g of CH₄, you have 4.21 moles

Explanation:

To know the amount of moles if you have 67.31 g of CH₄, you must know the molar mass, that is, the mass of one mole of a substance, which can be an element or a compound.

On the periodic table, the molar mass of the elements, also called the atomic mass or atomic weight, can be found at the bottom of the element. In this case:

To calculate the molar mass of a compound, the molar mass of the elements of the compound must be added multiplied by the times they appear. So in this case the molar mass of CH₄ is:  

CH₄= 12 g/mole + 4* 1 g/mole= 16 g/mole

Now you can apply the following rule of three: if 16 g are contained in 1 mole of CH4, 67.31 g in how many moles are present?

[tex]moles=\frac{67.31 g*1 mole}{16 g}[/tex]

moles= 4.21

If you have 67.31 g of CH₄, you have 4.21 moles

Answer:

the tail

Explanation:

Answer:

A.) tails

Explanation:

Answer:

The type of music each plant listens to.

Explanation:

A variable is any factor or condition whose value is changing in an experiment. A variable can occur in different types or quantity, and three types of variable (independent, dependent, and controlled) can be found in an experiment. In the experiment described above, "the type of music each plant listens to" is the variable. It is an independent variable whose value is changing because it exists in different types and it is the one that the student is observing its effect on the plant’s growth. In this experiment, this variable which differ will also produce different results (or effects).

Answer:

D

Explanation:

No energy is lost during transforming into another because energy cannot be reated or destroyed

Answer:

i think is d

Explanation:

I'm not sure wait for a few more answers

Answer:

Go ahead and plug in the percentages and time to find the answer.

Explanation:

The amount of a substance with half-life h, that remains after time t is 0.5t/h

Since 26% has decomposed, 74% remains.

So .74 = 0.580/h

ln .74 = (80/h) ln 0.5

h/80 = ln 0.5 / ln .74

h = 80 ln 0.5 / ln .74

h = 184.16 minutes

Answer:

Hailey the answer is D.

Explanation:

if liquid to solid is exothermic then then the other way around would be endorhermic

Answer: is the same for all substances.

Explanation:

The number of molecules in one mole of a substance is the same for all substances because

A mole (which is  the quantity of a substance that has the same number (Avogadro's number, is 6.022 * 10^23) of particles as are found in 12.000 grams of carbon-12 of the substance)  for any substance has  the same number of atoms, molecules, or ions contained in any other substance.

1 mole = 6.022 x 10^23 atoms, molecules, or ions

Answer:

B

Explanation:

Answer:

Metamorphic rocks are formed from pre-existing rock and sediment materials. They are formed when igneous, sedimentary, or other pre-existing metamorphic rocks are exposed to the heat and pressure as well as super-heated mineral-rich fluids. They are compacted together to form a new rock altogether. Metamorphism does not include the melting or liquefaction of the pre-existing rock. Instead, it compacts them and crushes them, pushing them together at extreme heat and pressure to form a new rock altogether composed of sedimentary, igneous, and other metamorphic rock. It's the rock hybrid of the geologic world.

Metamorphism is similar to when you squish playdough together, it doesn't form a new playdough color (unless you REALLY mixed that poor playdough together). It forms an amalgamation of different colors and patterns made from the other rock.

Taken from a paper I once wrote I explained this again:

"Metamorphic rocks are formed when pre-existing rocks and their minerals are compressed and altered by Earth’s internal processes; interior pressure, temperature (heat), and chemical reactions. The minerals and pre-existing rock necessary for the creation of metamorphic rock must then also be located deep underground if such processes are expected to make an impact and create a metamorphic rock."

Answer:

a

 The condensed structural formula for methane is

            [tex]CH_4[/tex]

b

 The condensed structural formula for ethane is

           [tex]CH_3 CH_3[/tex]

c

  The condensed structural formula for pentane is  

            [tex]CH_2(CH_2)_3CH_3[/tex]

d

   The diagram for the structural formula for cyclopropane is shown on the first uploaded image

Explanation:

Answer:

82.9 mL  

Explanation:

1. Volume of silver

[tex]\begin{array}{rcl}\text{Density}&=& \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho&=& \dfrac{m}{V}\\\\V &=& \dfrac{m}{\rho}\\\\& = & \dfrac{\text{50.0 g}}{\text{10.49 g$\cdot$mL}^{-1}}\\\\& = & \text{4.766 mL}\\\end{array}\\\text{The volume of the silver is $\large \boxed{\textbf{4.766 mL}}$}[/tex]

2. Volume of gold

[tex]\begin{array}{rcl}V& = & \dfrac{\text{50.0 g}}{\text{19.30 g$\cdot$mL}^{-1}}\\\\& = & \text{2.591 mL}\\\end{array}\\\text{The volume of the gold is $\large \boxed{\textbf{2.591 mL}}$}[/tex]

3. Total volume of silver and gold

V = 4.766 mL + 2.591 mL = 7.36 mL

4 New reading of water level

V = 75.5 mL + 7.36 mL = 82.9 mL

The question is missing information. Here is the complete question.

A gas at a pressure of 2.0 atm is in a closed container. Indicate the changes (if any) in its volume when the pressure undergoes the following changes at constant temperature and constant amount of gas. Match the words in the left with the column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before submitting your answer.

1. The pressure increases to 6.0 atm. The volume ________

2. The pressure drops to 0.40 atm. The volume _________

3. The pressure remains at 2.0 atm. The volume _________

Answer: 1. Decreases

2. Increases

3. Does not change

Explanation: According to the Ideal Gas Law, Pressure, Volume and Temperature of an ideal gas is related, as the following: PV = nRT.

In this case, since temperature (T) and amount of gas (n) are constant, the Boyle's Law can be used.

The law states that the volume of a given gas, under the conditios of temperature and amount of it are constant, is inversely proportional to the applied pressure: P₁.V₁ = P₂.V₂

Initial P (P₁) = 2

Initial V (V₁) = V

Final P (P₂) = 6

P₁.V₁ = P₂.V₂

2.V = 6.V₂

V₂ = 1/3V

When the pressure increases to 6 atm, volume decreases by 1/3.

P₁ = 2

V₁ = V

P₂ = 0.4

2.V = 0.4V₂

V₂ = 5V

When pressure drops to 0.4 atm, volume increases by 5.

Since there are no change in the pressure, the volume is the same from the beginning, so does not change.

Answer:

[tex]m_{nitrogen}=14g[/tex]

Explanation:

Hello,

In this case, since we are talking about a chemical reaction in which a compound having nitrogen and chlorine is decomposed into chlorine and nitrogen, we must remember that the law of conservation of mass must be obeyed, for that reason, we notice that the mass of the whole reactants must equal the mass of the whole products, as shown below:

[tex]m_{reactants}=m_{products}[/tex]

Next, we know there is only one single reactant and products are constituted by both chlorine and nitrogen:

[tex]m_{reactant}=m_{chlorine}+m_{nitrogen}[/tex]

In such a way, we can compute the mass of nitrogen as shown below:

[tex]m_{nitrogen}=m_{reactant}-m_{chlorine}=120.4g-106.4g\\\\m_{nitrogen}=14g[/tex]

Best regards.

Answer:

mass CO = 0.12166 g

Explanation:

Mass of CO = 0.12 grams

Explanation

Volume of CO gas = 117 mL = 0.117 L

Temperature of CO = 55.0 oC = 328 K

Assumption : Pressure of CO = atmospheric pressure = 1.0 atm

According to ideal gas law,

moles of CO = [(Pressure of CO) * (Volume of CO gas)] / [(R) * (Temperature of CO)]

where R = gas constant = 0.0821 L-atm/mol-K

moles of CO = [(1.0 atm) * (0.117 L)] / [(0.0821 L-atm/mol-K) * (328 K)]

moles of CO = 0.004345 mol

mass CO = (moles of CO) * (molar mass CO)

mass CO = (0.004345 mol) * (28.0 g/mol)

mass CO = 0.12166 g

Answer:

See explanation below

Explanation:

In order to explain this, is neccesary to draw both confomers, the cis and trans, but in the chair conformation, because in that way we can see much better the bonds and the reason of why the cis reacts faster than trans.

As you can see in picture attached, the more stable conformer is the one where the H and Br are in the axial position, and the tert butyl group in equatorial position. In these positions, the cis isomer can undergo an E2 reaction, and the ethoxide would have no problem to substract the hydrogen atom from the molecule to eliminate the Bromide. This is because the t-butyl group in equatorial position, is not exerting steric hindrance, therefore is faster.

In the case of the trans, the t-butyl group is in the axial position as well as the hydrogen and bromide, therefore, when the E2 reaction undergoes, the hydrogen is substracted by ethoxide, but it will be slow because the t.butyl group exerts steric hindrance in the axial positions, therefore, the hydrogen will be substracted slower than in the cis position. This is the main reason for the cis to be faster.

As for the second part of the question, which will be the answer of the whole question, see picture attached 2 for the whole sentence, and the match of the words is the following:

1. Axial

2. More

3. Blank (No word there)

4. less

5. Blank

6. Cis

7. Trans

8. Cis

Answer:

Molecules in the hot water bottle are

moving faster than molecules in the skin.

Explanation:

Answer:

The first one "Molecules in the hot water bottle are

moving faster than molecules in the skin.''

Explanation:

Answer:

Solute

Explanation

A substance that gets dissolved to create a solution is best described as to as

Answer:

Explanation:

1 ) Ammonium bromide is a salt of ammonium hydroxide and hydrogen bromide . The former is a weak base and the later is a strong acid so the salt will make acidic solution in water. It happens due to salt hydrolysis.

2 ) Potassium cyanide is  salt of potassium hydroxide and hydrogen cyanide . The former is strong base and the later is weak acid so its salt will be basic in nature .

3 ) sodium chloride is a salt of sodium hydroxide and hydrogen chloride . The former is strong base and later is strong acid. So the salt is neutral .

4 ) Potassium iodide is a salt of potassium hydroxide and hydrogen iodide . The former is a strong base and the later is a strong acid . So the salt is neutral or a bit basic.

Answer:

No pigment.

Explanation:

Pigment makes color, and hair loses color when it loses pigment.

Answer:

The answer you are looking for is A

Answer:

[tex]\boxed{\text{0.25 \% H, 43.96 \% O, 4.75 \% F, 20.22 \% Al, 21.05 \% Si, 9.77 \% K}}[/tex]

Explanation:

The oxide formula is (KF)₂(Al₂O₃)₂(SiO₂)(H₂O).

Rewrite it as a molecular formula — H₂O₂₂F₂Al₆Si₆K₂

The formula for the mass percent of an element is

[tex]\text{Mass \%} = \dfrac{\text{mass of element}}{\text{mass of compound}} \times 100 \, \%[/tex]

We can set up a table to calculate the percent of each element.

[tex]\begin{array}{rrrrr}\textbf{Atom} & \textbf{No.} &\textbf{MM/u} & \textbf{Mass/u} & \mathbf{\%} \\\text{H} & 2& 1.01 & 2.02& 0.25 \\\text{O} &22 & 16.00 & 351.98 & 43.96 \\\text{F} & 2 & 19.00 & 38.00 & 4.75 \\\text{Al} & 6 & 26.98 & 161.89 & 20.22 \\\text{Si} & 6 & 28.08 & 168.51 & 21.05 \\\text{K} & 2 & 39.10 & 78.20 & 9.77 \\& & \text{TOTAL =} & \mathbf{800.60} & \mathbf{100.00} \\\end{array}\\[/tex]

[tex]\text{The percent composition of muscovite mica is}\\ \boxed{\textbf{0.25 \% H, 43.96 \% O, 4.75 \% F, 20.22 \% Al, 21.05 \% Si, 9.77 \% K}}[/tex]