Answer:
The coins are gold
Explanation:
To solve this question we need to find the density of the sample knowing that density is the ratio between the mass of a sample (385.000g) and the volume that is occupying (20.0mL).
Density is:
385.000g / 20.0mL = 19.3g/mL
As the density of the sample is equal to the density of gold:
The coins are goldWhich of the following options would be the best for dissolving PbBr2(s)?
1) add to a solution of CH3COOH
2) add to a solution of NaBr
3) add to a solution of NH3
4) add to a solution of NH4Br
5) add to a solution of NaOH
The best option for dissolving PbBr₂ is option (2)
2) Add a solution of NaBr
The reason for choosing the above option is as follows;
Lead (II) bromide is an inorganic powdery substance that has a solubility in water of 0.973 g/100 mL at 20°C. It is insoluble in alcohol but is soluble in alkali, ammonia, NaBr, and KBr.
PbBr₂ is slightly soluble in ammonia, and it reacts with NaOH to produce Pb(OH)₂ and NaBr.
Taking the solubility product of PbBr₂ as [tex]K_{sp}[/tex] = 6.60 × 10⁻⁶, in a solution of 0.5 M NaBr, we have;
PbBr₂ → Pb⁺ + 2Br⁻
[tex]K_{sp}[/tex] = [Pb]·[2Br]²
Therefore, we get;
6.60 × 10⁻⁶ = [x]·[0.5]²
Where;
x = The number of moles of lead, Pb, in per liter of solution
∴ x = (6.60 × 10⁻⁶)/[(0.5 )²] = 2.64 × 10⁻⁵.
The molar solubility of PbBr₂ per liter of NaBr, x = 2.64 × 10⁻⁵ mol/L
PbBr₂ is more soluble in NaBr.
Given that ammonium ion NH₄Br in water gives similar products to ammonia, NH₃, it is expected to be more suitable to dissolve PbBr₂ in NaBr.
Therefore, the best solution for dissolving PbBr₂(s) is NaBr, the correct option is option (2) add a solution of NaBr.
Learn more about solubility product here;
https://brainly.com/question/14300821
What must happen to uranium before it can be used as a fuel source?
Answer: Uranium enrichment. Uranium is used to fuel nuclear reactors; however, uranium must be enriched before it can be used as fuel. Enriching uranium increases the amount of uranium-235 (U235) that can sustain the nuclear reaction needed to release energy and produce electricity at a nuclear power plant.
An individual was injected with 80 mg of inulin and 960,000 counts per min (cpm) of tritium-labeled water (3H20) to determine the volume of various body fluid compartments. After equilibration a blood sample was obtained and the plasma inulin concentration was 0.5 mg% and the plasma activity (concentration) of tritium was 20 cpm/ml. The volumes of which body compartments can be determined?
The measurement of body fluid compartments can be achieved by the dilution of chemical compounds that only circulate and disperse in the region of selected areas in the body. The dilution process is dependent on how the concentration is defined.
Given that:
the concentration of plasma insulin after equilibrium = 0.5 mg %∴
Concentration C = 0.5 mg/100
Concentration C = 0.005 mg/ml
The mass of insulin = 80 mgSince the mass amount of the chemical compound(i.e. insulin) and the concentration is known.
The volume of the body fluid compartment can be calculated as:
[tex]\mathbf{volume = \dfrac{\text{mass of the marker }}{concentration }}[/tex]
[tex]Volume = \dfrac{80 \ mg}{0.005 \ mg/ml}[/tex]
Volume = 16000 ml
Thus, it is known that insulin is generally utilized for the measurement of the extracellular fluid volume and serves as a cell impermeant marker.
As a result;
The volume of the extracellular fluid compartment is 16000 ml.
However, the tritium-labeled water is a good marker for the entire body fluid compartment due to the fact that:
its diffusion occurs throughout the entire body,it is identical to water and;the equilibrium concentration is typically easy to measure due to the radioactive characteristics of tritium.Given that:
plasma activity of tritium = 20 cpm/ml
i.e.
In 1 ml of plasma, 20 cpm of tritium is present.
As such, in 960,000 counts per min (cpm) of tritium-labeled water, the volume of the whole body compartment is:
[tex]\mathbf{= \dfrac{960000}{20} ml \plasma}[/tex]
= 48000 ml of plasma
Therefore, we can conclude that the volumes of the body compartment that can be determined are:
The volume of the extracellular fluid compartment, which is 16000 ml.The volume of the whole body compartment, which is 48000 mlLearn more about body fluid compartments here:
https://brainly.com/question/6791522?referrer=searchResults
Given the following balanced reaction: 2Na(s) + F2(g) --> 2NaF(s)
a) How many moles of NaF will be made from 2.6 moles of F2?
b) How many moles of NaF will be made from 4.8 moles of Na?
Answer:
yes it is corrwect iyt is absolitle correct
Explanation:
The density of toluene (C7H8) is 0.867 and that of thiophene (C4H4S) is 1.065 g/ml. A solution is made by dissolving 10.00g thiophene in 250.00ml of toluene. a)Calculate the molarity of the solution
b)Assuming the volume are addictive ,calculate the molarity of the solution
Answer:
Calcular la molaridad de una solución que se preparó disolviendo 14 g de KOH en suficiente
agua para obtener 250 mL de solución. (masa molar del KOH = 56 g/mol).
Resolución: de acuerdo a la definición de “molaridad” debemos calcular primero, el número de mol de soluto (KOH) que
se han disuelto en el volumen dado, es decir, “se transforma g de soluto a mol de soluto” por medio de la masa molar,
así:
56 g de KOH 14 g de KOH
----------------- = ------------------- X = 0,25 mol de KOH
1 mol X
Ahora, de acuerdo con la definición de molaridad, el número de mol debe estar contenido en 1000 mL (o 1 L) de
solución, que es el volumen estándar para esta unidad de concentración, lo que se determina con el siguiente planteamiento:
0,25 mol X
----------------------- = ------------------------- X = 1 mol de KOH
250 mL de solución 1000 mL de solución
Explanation:
Where do reactions in a solid generally take place?
A. At the center of the solid.
B. All throughout the solid
C. Only on opposite sides of the solid due to repelling forces.
D. On the surface of the solid.
Answer:
It's D. On the surface of the solid.
Explanation:
If the reactant is a solid, the surface area of the solid will impact how fast the reaction goes. This is because the two types of molecule can only bump into each other at the liquid solid interface, i.e. on the surface of the solid. So the larger the surface area of the solid, the faster the reaction will be.
In an analysis of interhalogen reactivity, 0.350 mol ICl was placed in a 5.00 L flask and allowed to decompose at a high temperature.
2 ICl(g) I2(g) + Cl2(g)
Calculate the equilibrium concentrations of I2, Cl2, and ICl. (Kc = 0.110 at this temperature.)
I2 M
Cl2 M
ICl M
Answer:
[ICl] = 0.0420 M
[I₂] = [Cl₂] = 0.0140 M
Explanation:
Step 1: Calculate the initial concentration of ICl
[ICl] = 0.350 mol / 5.00 L = 0.0700 M
Step 2: Make an ICE chart
2 ICl(g) ⇄ I₂(g) + Cl₂(g)
I 0.0700 0 0
C -2x +x +x
E 0.0700-2x x x
The concentration equilibrium constant (Kc) is:
Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²
0.332 = x/0.0700-2x
x = 0.0140
The concentrations at equilbrium are:
[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M
[I₂] = [Cl₂] = x = 0.0140 M
For centuries scientists found evidence that supports the theory of spontaneous generation. Which of the following
supported this theory?
A. The sun rising in the east and seeing in the west.
B. Maggots appearing on rotten meat.
C. The swan-next flask experiment.
D. All living things are made of cells.
Spontaneous generation theory is that living organisms can arise by non living things.
This theory follows the concept of abiogenesis where there is non living parent for a living child.
The appearance of maggots from rotten meat is the idea of abiogenesis, this creates a living organism with a dead parent.
The rotten piece of meat is a non living object but still maggots were formed from this.
Therefore the correct answer is B.
Answer:
a
Explanation:
Which of the following is true of solutes dissolving in water?
a) C2H4 will dissolve because it is able to hydrogen bond.
b) CH3CH2OH will dissolve because it contains a polar bond.
c) HCI will not dissolve because it connot hydrogen bond.
d) KBr will not dissolve because it contains all ionic bonds.
B is the answer to your question.
C2H4 is not capable of hydrogen bonding because the H's are attached to the Carbon, and the charge is 0.
Although HCl cannot hydrogen bond, that aspect does not hinder it's ability to dissolve. Because HCl is polar and so is water, the positive side of H2O will be attracted to the negative side of HCl, thus "tearing" the molecule apart. (Like dissolves like - polar dissolves polar)
Based on the Solubility rule, KBr is soluble because it contains a group 1 metal.
Which of the following will affect the rate of a chemical reaction?
solution temperature
solution color
solute mass
solution volume
Answer:
Solution temperature.
Explanation:
Hello there!
In this case, considering this question about chemical kinetics, it will be possible for us to analyze two perspectives:
1. Molecular: here, we infer that the solution temperature will provide more energy to the molecules in order to undergo more effective crashes which will make more products and therefore, increase the rate constant.
2. Mathematical: by means of the Arrhenius equation, it will be possible to tell that the increase in the temperature of the system, the negative of the exponent present in such equation will increase and therefore turn the rate constant bigger.
In such way, we infer the answer is solution temperature.
Regards!
What volume of each solution contains 0.14 mol of KCl? Express your answer using two significant figures.
1.8 M KCl
Answer:
Solution given:
1 mole of KCl[tex]\rightarrow [/tex]22.4l
1 mole of KCl[tex]\rightarrow [/tex]74.55g
we have
0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g
74.55g of KCl[tex]\rightarrow [/tex]22.4l
10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre
volume of each solution contains 0.14 mol of KCl contain 3.11litre.
[tex]\:[/tex]
1 mole of KCl → 22.4l
1 mole of KCl → 74.55g
we have
0.14 mole of KCl → 74.55*0.14=10.347g
74.55g of KCl → 22.4l
10.347 g of KCl → 22.4/74.55*10.347=3.11litre
volume of each solution contains 0.14 mol of KCl contain 3.11litre.
A Grignard reagent is prepared by reacting trans-1-bromo-1-butene with magnesium. What are the products of the reaction when this reagent is reacted with: a. Ethanol
Solution :
A Grignard compound or a Grignard reagent is defined as a chemical compound having a generic formula of R−Mg−X.
Here, X = halogen
R = organic group
The Grignard reagents are obtained by treating the organic halide with a magnesium metal.
In the context, when trans-1-bromo-1-butene is reacted with magnesium, a Grignard reagent is produced.
When this Grignard reagent is reacted with an ethanol, the following product is obtained in the attachment :
11. An isotope Q has 18 neutrons a mass number of 34. (a) (i) What is an isotope? An isotope is one of two or C (b) Write its electron arrangement. Mass number=34 Number of neutrons=18 Number of Protons = 34-15-16 (c) To which period and group does Q belong? Protors - Electons - Atomic number Period - Group (d) How does Q form its ion?
An isotope is an element with the same atomic number but different mass number due to differences in number of neutrons.
electron configuration is 2,8,6.
Belongs to group 6 and period group 3.
It forms an ion by accepting 2 electrons
What is the basic unit of chemistry?
O A. The bond
O B. The atom
O C. The sun
O D. The cell
Answer:
B. The atom
Explanation:
Cells are the most basic unit of structure and the smallest unit of matter is the atom.
Answer:
B. The atom
Explanation:
yeee it was right
Which process refers to the dissociation of Naci into Na+ and Ci+?
Answer:
dissolution is the process
Part A
When the following liquids are poured into the same container, they separate as shown in the image. Based on the data
in the table below, what caused the order of the layers?
rubbing alcohol
vegetable oil
water
corn syrup
Mass
Liquid
corn syrup
water
Volume Used
95 cm
90 cm
85 cm
105 cm?
130.158
90.00 8
77.358
81.908
Density
1.37 g/cm
1 g/cm
0.91 g/cm
0.78 g/cm
vegetable oil
rubbing alcohol
I
B
X
Font Sizes
A- A -
E 3
Answer: The layers are ordered by density, with the least dense layer on top, and the densest layer on the bottom.
Explanation:
Plato
Part A
3.75 mol of LiCl in 3.36 L of solution
Express the molarity in moles per liter to three significant figures
Answer:
1.12 mol/L.
Explanation:
From the question given above, the following data were obtained:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:
Molarity = mole / Volume
With the above formula, we can obtain the molarity of the solution as follow:
Mole of LiCl = 3.75 moles
Volume = 3.36 L
Molarity =?
Molarity = mole /Volume
Molarity = 3.75 / 3.36
Molarity = 1.12 mol/L
Thus, the molarity of the solution is 1.12 mol/L
Is Trygliceride a saturated or unsaturated molecule? Please explain.
Fats may be either saturated or unsaturated. A saturated fat is a fat that consists of triglycerides whose carbon chains consist entirely of carbon-carbon single bonds. ... An unsaturated fat is a fat that consists of triglycerides whose carbon chains contain one or more carbon-carbon double bonds.
During electrophilic aromatic substitution, a resonance-stabilized cation intermediate is formed. Groups, already present on the benzene ring, that direct ortho/para further stabilize this intermediate by participating in the resonance delocalization of the positive charge. Assume that the following group is present on a benzene ring at position 1 and that you are brominating the ring at positon 4. Draw the structure of the resonance contributor that shows this group actively participating in the charge delocalization.
-----OCH3
Answer:
See explanation and image attached
Explanation:
Aromatic compounds undergo electrophilic aromatic substitution reactions in which the aromatic ring is maintained.
Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene depending on the nature of the substituent present in the ring.
Substituents that activate the ring towards electrophilic substitution such as -OCH3 are ortho-para directing.
The major products of the bromination of anisole are p-bromoanisole and o-bromoanisole. The resonance structures leading to these products are shown in the image attached.
A graph of gas pressure versus the number of particles in a container is a straight line. Which other relationship will have a similar graph?
Answer:
volume versus temperature, because they are also directly proportional.
Explanation:
Just took the test!
Convert the concentration of 0.700 M Na2SO4 to g/mol
To convert from mass concentration to molar concentration we use the formula;
Mass concentration = molar concentration * molar mass
Molar concentration of Na2SO4 = 0.700 M
Molar mass of Na2SO4 = 2(23) + 32 + 4(16) = 142 gmol-1
Hence;
Mass concentration = 0.700 M * 142 gmol-1
Mass concentration = 99.4 g/mol
To know more about concentration, see
https://brainly.com/question/23437000
You have been contracted to determine how different salts affect the pH of water. Which of the solids in the following set should you test to investigate for the effects of cations on pH?
a. AlBr3
b. Rb2SO3
c. MgCl2
d. RbBrO
e. CH3NH3Br
Answer:
Hence the solids that should test to investigate the effects of cations on pH is
[tex]AlBr_{3}[/tex] (Cation is Al 3+)
[tex]MgCl_{2}[/tex] ( Cation is Mg 2+)
[tex]CH_{3} NH_{3} Br[/tex] ( Cation is NH2+).
Explanation:
The solids in the following should you test to investigate the effects of cations on pH.
[tex]AlBr_{3}[/tex] contains (Cation is Al 3+)
[tex]MgCl_{2}[/tex] contains ( Cation is Mg 2+)
[tex]CH_{3} NH_{3} Br[/tex] contains( Cation is NH2+ )
The atoms or the molecules containing the positive charge that gets attracted to the cathode are called cations. The compounds a. [tex]\rm AlBr_{3}[/tex], c. [tex]\rm MgCl_{2}[/tex] and e. [tex]\rm CH_{3}NH_{3}Br[/tex] should be investigated.
What are cations and pH?Cations are the positive charge containing molecules and atoms that have more protons in their nucleus than the number of electrons in their shells. They are formed when they lose one or more electrons to another atom.
The addition or release of the electrons of the cations and anions affects the pH system as absorption of the cation decreases the pH and absorption of the anions increases the pH.
Hence, [tex]\rm Al^{3+}[/tex], [tex]\rm Mg^{2+}[/tex] and [tex]\rm NH^{2+}[/tex] are the cation that should be investigated. The addition of the cations will reduce the pH of the reaction.
Therefore, absorption of the cation reduces the pH.
Learn more about cations and pH here:
https://brainly.com/question/13800672
Conversion Problem (show all work):
1. A patient required 3.0 pints of blood during surgery. How many liters does this correspond
to? Show all work. Use conversion factors available in the text or the exam packet. (4)
1.42liters, which is equivalent to 3pints, of blood is required for the surgery
Pints is a unit of measurement for volume in the United States. However, it can be converted to litres using the following equation:1 US pint = 0.473 liters
Hence, according to this question which states that a patient required 3.0 pints of blood during surgery. This means that the patient required:3 × 0.473
= 1.419 liters of blood for the surgery
1.42liters, which is equivalent to 3pints, of blood is required for the surgeryLearn more at: https://brainly.com/question/24168664
Four atoms and/or ions are sketched below in accordance with their relative atomic and/or ionic radii. Which of the following sets of species are compatible with the sketch?
Explain. (a) C,Ca2+,Cl−,Br−;
(b) Sr4, Cl,Br−,Na+
(d) Al,Ra2+,Zr2+
(c) Y,K,Ca,Na+, Mg2+;
e) Fe,Rb,Co,Cs
Answer:
Hence the correct option is an option (b) Sr4, Cl,Br−,Na+.
Explanation:
Bromine and chlorine belong to an equivalent group. As we go down the group the dimensions increases which too there's a charge on the bromine atom. therefore the size of the Br- is going to be larger in comparison to the chlorine atom.
Sr atom is within the second group, and also it's below the above-mentioned atoms.so Sr is going to be the larger one among all the atoms.
Sodium and chlorine belong to an equivalent period .size decrease from left to right. but due to the charge on sodium its size decreases and there's an opportunity that Na+ size could be adequate for Cl.
Here we finally assume that two atoms are of an equivalent size (Na+ and Cl) which are less in size compared to the opposite two(Sr and Br-) during which one is greater (Sr)and the opposite is smaller(Br-).
Determine what product will be produced at the negative electrode for the following reaction:
2KCl(aq) + 2H20(1) -> H2(g) + Cl2(g) + 2KOH(aq)
A. H2
B. Cl2
с. КОН
D. K
Answer:
Choice A. [tex]\rm H_{2}[/tex] would be produced at the negative electrode.
Explanation:
Ionic equation for this reaction:
[tex]2\, {\rm K^{+}} + 2\, {\rm Cl^{-}} + {2\, \rm H_{2} O} \to {\rm H_{2}} + {\rm Cl_{2}} + 2\, {\rm K^{+}} + {\rm 2\, OH^{-}}[/tex].
Net ionic equation:
[tex]2\, {\rm Cl^{-}} + 2\, \rm H_{2} O} \to {\rm H_{2}} + {\rm Cl_{2}} + 2\, {\rm OH^{-}}[/tex].
Half-equations:
[tex]2\, {\rm Cl^{-}} \to {\rm Cl_{2}} + 2\, {e^{-}}[/tex].
(Electrons travel from the solution to an electrode.)
[tex]2\, {\rm \overset{+1}{H}_{2} O} + 2\, {e^{-}} \to \overset{0}{\rm H}_{2} + 2\, {\rm O\overset{+1}{H}\!^{-}}[/tex].
(An electrode supply electrons to the solution to reduce some of the [tex]\rm H[/tex] atoms from [tex]\rm H_{2}O[/tex].)
In a DC circuit, electrons always enter the circuit from the negative terminal of the power supply and return to the power supply at the positive terminal.
The negative electrode is connected to the negative terminal of the power supply. Electrons from the power supply would flow into the solution through this electrode.
This continuous supply of electrons at the negative electrode would drive a reduction half-reaction. In this question, that corresponds to the reduction of water: [tex]2\, {\rm \overset{+1}{H}_{2} O} + 2\, {\rm e^{-}} \to \overset{0}{\rm H}_{2} + 2\, {\rm O\overset{+1}{H}\!^{-}}[/tex]. Hence, [tex]\rm H_{2}[/tex] would be produced at the negative electrode.
A substance is tested and has a pH of 7.0. How would you classify it?
CaCl2 has which bond?
Answer:
CaCl2 has ionic bond because here calcium gives its electron to the chlorine atom and becomes positivetly charged ion.
Chad drew a diagram to compare animal cells and bacterial cells.
Which label belongs in the area marked X?
Explanation:
Don't know wwwwmkbnkkkoo
HBr can be added to an alkene in the presence of peroxides (ROOR). What function does the peroxide serve in this reaction
Answer:
Radical chain initiator
Explanation:
The peroxide here serves as a radical chain initiator. In the field of chemistry the radical initiatives are those substances that are used in industrial processes like polymer synthesis. These initiatives have weak bonds generally and they're mostly used to create free radicals. These radicals are atoms that have odd numbers of electrons. Peroxide is an example of such.
What type of bond is present in NBr?
Answer:
Covalent bonding and non-covalent bonding
