Answer:
gshshs
Explanation:
bshsjskskehhshs
The copper metal is heated in the air. The magnesium ribbon emits a brilliant light and magnesium oxide, which is white. When oxygen is passed over copper (in the presence of heat), an oxidation reaction occurs, resulting in the formation of black copper oxide. The greater change in mass observed when they start to burned.
What is copper metal ?Copper is a mineral and an element that is essential to our daily lives. It is a significant industrial metal due to its high ductility, malleability, thermal and electrical conductivity, and corrosion resistance. It is a necessary nutrient in our diet.
Metals are a class of materials that have high electrical and thermal conductivity, as well as malleability, ductility, and high light reflection. Copper (Cu), aluminium (Al), and other metals are examples.
The combustion of magnesium ribbon is a combined reaction. This is due to the fact that magnesium reacts with oxygen to form the single product magnesium oxide. When magnesium ribbon is burned in air, it reacts with the oxygen in the air to form magnesium oxide.
Thus, 3g of clean mg ribbon and 8g of clean copper metal were burnt separately in equal volume of air and both mass reacted completely with air the greater change in mass observed when they start to burned.
To learn more about copper metal, follow the link;
https://brainly.com/question/11992235
#SPJ2
Which of the following changes in the state of a substance results in an increase in the entropy?
Gas to solid
Gas to liquid
Liquid to solid
Solid to liquid
Answer:
the correct answer is
D. solid to liquid
is being sporty a personality trait
Answer:
A physical trait can be identified just by looking at a person. Blonde, tall, man, short, fair skinned, injured, brown eyed, athletic, muscular, handicapped. ... For everyone character trait, there is an OPPOSITE character trait
Hiii please help me for balancing chemical equations:
potassium iodide + chlorine ------> potassium chloride + iodine
Answer:
KI + Cl2 = KCl + I2
Explanation:
hope this helps!!!
Answer:
2KI +Cl₂ → 2KCl +I₂
Explanation:
Potassium ion: K+
Iodide ion: I-
Thus, potassium iodide is KI.
Chlorine exist as a diatomic molecule thus it is written as Cl₂.
Chloride ion: Cl-
Thus, potassium chloride is KCl.
Iodine also exist as a diatomic molecule, thus it is written as I₂.
Write an unbalanced equation:
KI +Cl₂ → KCl +I₂
Now balance by ensuring the number of atoms of each element on each side is the same.
LHS
K: 1 ×2= 2
I: 1 ×2= 2
Cl₂: 2
RHS:
K: 1 ×2= 2
I: 2
Cl: 1 ×2= 2
Thus, the balanced equation is:
2KI +Cl₂ → 2KCl +I₂
What is the percent yield of a reaction?
O A. The difference between measured and calculated amounts
OB.
The amount of produd obtained
amount possible
* 100
C. The amount of product actually obtained in a reaction
D. The amount of product that is possible from a reaction
Answer:
B. The amount of produd obtained/amount possible * 100
Explanation:
In chemistry, the yield of a chemical reaction is the quantity or amount of products obtained in that chemical reaction. It is calculated by using the following formula:
Percentage yield = Actual yield/theoretical yield × 100
- The actual yield is the amount of products got from a chemical reaction
- The theoretical yield is the amount of product got from using the balanced equation (stoichiometry).
On a plateau on a heating curve, _____.
phase changes are occurring
no heat is being absorbed
all the absorbed heat is being used to overcome forces of attraction between the particles or molecules and phase changes are occurring
all the absorbed heat is being used to overcome forces of attraction between the particles or molecules
Answer:
On a Plateu on a heating curve phase changes are occuring
Explanation:
The first Phase is melting during which the temrature stays the same while water melts.Other phase changes are freezing sublimation Vaourization condensation and deposition
what structure does solid lead (11)fluoride have
All atoms of the same element:
have the same number of atoms
have the same number of protons
have the same number of neutrons
have the same number of electrons
Answer:
have the same number of protons
CORRECT ANSWER ONLY ND WILL GIVE BRAINLIEST✌
Calculate the mass of nitrogen dioxide gas that would occupy
the same volume as 10g of hydrogen gas at ē same pressure and temperature
(H= 1.0 N = 14.0 O= 16.0) GAS LAWS/MOLES
Answer:
150g
Explanation:
Assuming they are ideal gases at the same temperature and pressure, equal moles of gasses have equal volume. IN this case, if we have 10g of hydrogen gas, that is 5 moles of H2 gas. That means 5 moles og NO2 will occupy the same volume which is 5*(14.0 + 16.0*2) = 230 g
Scoring Scheme: 3-3-2-1 Given the starting solution had a concentration of 1.25 M, how many moles of Co[H2O]6Cl2 were available in the amount of starting solution you used
Answer:
The solution has 0.00994 moles of Co[H2O]6Cl2
Explanation:
Complete question: Given the starting solution had a concentration of 1.25 M, how many moles of Co[H2O]6Cl2 were available in the amount of starting solution you used?
mL= 7.95
Step 1: Data given
Concentration of the starting solution = 1.25 M
Starting solution = Co[H2O]6Cl2
Step 2: Calculate molar mass of Co[H2O]6Cl2
Atomic mass of Co = 58.93 g/mol
Atomic mass of H = 1.01 g/mol
Atomic mass of O = 16.00 g/mol
atomic mass of Cl = 35.45 g/mol
Molar mass of Co[H2O]6Cl2 =
1*58.93 + 12*1.01 + 6*16.00 + 2*35.45 = 237.95 g/mol
Step 3: Calculate number of moles
C = n/v
⇒with C = the Concentration of the starting solution = 1.25 M
⇒with n= the number of moles = to be determined
⇒with v = the volume = 7.95 mL = 0.00795 L
n = C * V
n = 1.25 M * 0.00795 L
n = 0.00994 moles
The solution has 0.00994 moles of Co[H2O]6Cl2
What is the product of the following numbers? Use a scientific calculator to
find the answer.
5.56 x 104 x 2.43 x 106
Answer:
148943.0592
Explanation:
What element has the electron configuration 1522s22p63s23p4?
Answer:
Sulphur
Explanation:
1s² 2s² 2p⁶ 3s² 3p⁴
So in total ya got 16 electrons
3===> defines the period
4+12===> defines the group
and boom, there ya got yaself an element called sulphur
which of the following is an example of an arrthenius acid
Answer:
The common examples of Arrhenius acid includes HCl (hydrochloric acid), H2SO4 (sulphuric acid), HNO3 (nitric acid), etc.Oct 21, 2020
Explanation:
Calculate the solubility of Maslog at 25€
4 30-0cm of its Saturated solution at that
temperature gave 180g of the anhydrous
C= 12. 0-46. Ma =23
Salt
Answer:
20
Explanation:
calculated saturated solutions
what is solution, colloid, suspension?
Explanation:
SOLUTION:Solution is a homogenous mixture of two or more substances in relative amounts that can be varied continuously up to what is called the limit of solubility.
COLLOID:A mixture in which one substance is divided into minute particles (called colloidal particles) and dispersed throughout a second substance
SUSPENSION:A suspension is a heterogeneous mixture of a finely distributed solid in a liquid. The solid is not dissolved in the liquid, as is the case with a mixture of salt and water.
The graph shows the volume of a gaseous product formed during two trials of a reaction. A diferent concentration of reactant was used during each trial, whereas the other factors were kept constant. Trial 2 Amount of Product Trial 1 Time Which of the following statements explains which trial has a lower concentration of the reactant? O Trial 1, because the average rate of the reaction is lower. O Trial 1, because this reaction lasted for a longer duration than Trial 2. O Trial 2, because this reaction was initially fast and later slowed down. O Trial 2, because the volume of product formed per unit time was higher
Answer:
A). Trial 1, because the average rate of the reaction is lower.
Explanation:
The first sentence elaborates that 'trial 1 had a lower level of concentration of the reactant that eventually led the reaction's average rate to fall.'
A trial having a higher level of concentration of a specific reactant will cause the concentration's average rate to rise. As per the graph provided, trial 2's average reaction rate is higher which shows that its concentration is greater and more reactive. However, the opposite happens in trial 1 where the amount of reactant is lesser in the concentration that leads the concentration to possess a lower rate of reaction. Thus, option A is the correct answer.
Which of these hypotheses cannot be tested?
A. The percentage of salt in ocean water stays the same throughout the ocean.
O B. Doubling the amount of salt in a bread recipe will cause the dough to rise faster.
C. Cooks should use sea salt in recipes instead of regular table salt.
O D. Increasing the amount of salt in salt water will increase the boiling point.
Cooks should use sea salt in recipes instead of regular table salt.
write molecular formula
1)aurric cloride
2)aluminium hydroxide
3)potassium thiosulphate
4)magnesium bicarbonate
5)magnesium sulphate
6)sodium oxide
7)cuprous oxide
8)mercuric oxide
9)calcium nitrate
10)aluminium oxide
11)ferric chloride
12)ammoium oxide
13)silver chloride
14)hydrogen bromide
15)magnesium nitride
16)hydrogen peroxide
17)sodium sulphate
18)ammonium sulphate
19)ferrous sulphate
20)sodium carbonate
21)zinc carbonate
22)calcium silicate
23)zinc carbonate
24)potassium clorate
25)aluminium hydroxide
26)ammonium hydroxide
27)sodium silicate
Okay.
Here's your below answers.
1) AuCl3.
2) Al(OH)3.
3) K2S2O3.
4) Mg(HCO3)2.
5) MgSO4.
6) Na2O.
7) CuO.
8) HgO.
9) Ca(NO3)2.
10) Al2O3.
11) FeCl2.
12) (NH4)2O.
13) AgCl.
14) HBr.
15) Mg3N2.
16) H2O2.
17) Na2SO4.
18) (NH4)2SO4.
19) FeSO4.
20) Na2CO3.
21) ZnCO3.
22) CaSiO3.
23) ZnCO3.
24) KClO3.
25) Al(OH)3.
26) NH4OH.
27) Na2SiO3.
which best describes the relationship between internal energy and thermal energy
Answer:
answer is d on edge
Explanation:
If carbon was the most common element found in the moons and planets, what element is
missing that would make them similar to Earth?
Over a period of 2 minutes, 180 coulombs of charge pass through a resistor. What is the current through the resistor during this time?
Type the correct answer in the box. Use numerals instead of words.
The current through the resistor during this time is
A.
Answer:
Explanation:
Formula
The current = charge / time
The charge is in coulombs
The time has to be in seconds.
1 minute = 60 seconds
2 minutes = 120 seconds.
charge = 180 coulombs
current = 180 / 120
current = 1.5 amperes.
If we burn 1 gr of ethyl alcohol (C2H5OH) this will translate into a release of about 50 W of thermal energy of the flame that raise the temperature of the hot and cold reservoirs of a Sterling engine at 55 °C and 95 °C respectively. If at steady state the engine turns at about 240 rpm, its gears are shaped as rings of radius ~2 cm and weigh 50 gr, how efficient (in %) is the transfer of energy via flame?
Answer:
0.116%
Explanation:
efficiency of sterling engine = 1 - ( 55 + 273 )k / ( 95 + 273 ) k
= 1 - ( 328 / 368 ) = 0.10869
Determine how efficient the transfer of energy via flame is
apply this relation ; energy of steady state / energy output ---- ( 1 )
where; energy output = efficiency of sterling engine * energy
= 0.10869 * 50 = 5.4345 J/sec
energy of steady state = 1/2 * I * w^2 ------ ( 2 )
I = moment of inertia of engine = 2 * 10^-5 kgm^2
back to equation 2 :
energy of steady state = 1/2 * ( 2 * 10^-5 ) * ( 240 * 2π / 60 )^2
= 630.88 * 10^-5 J /sec
Input values into equation 1
= [ (630.88 * 10^-5 ) / 5.4345 ] * 100
= 0.116%
neutral radicals examples
Neutral radicals are always electropositive
some examples of neutral radicals are:-
Ca±±Mg±±Ba ±±Al±±NH4±Hope it is helpful to you
what is the molarity of HCL solution that has a density of 1.17g/ml at 25°?
Here, we have been given that;
$ \bf{1 ml}$ = 1.17 g$ \bf{1 l}$ = 1170 gHence, we can note that,
No. of moles of HCL (n) = $ \sf{\frac{1170}{36.5}}$(n) = 32.05
[tex] \\ [/tex]
Thus,
Molarity = 32.05 mg/LHence, molarity of the given solution will be 32.05 mg/L.
hii pls help me with this ionic equation
Answer:
net ionic equation
[tex]\boxed{ CaCO_3{}_{(s)} + 2H^{+} {}_{(aq.)} \rightarrow Ca^{2+} {}_{(aq.)} + H_2O_{(l)} + CO_2{}_{(g)} } [/tex]
A sample of hydrogen gas H2 has a volume of 5.0 L and a pressure of 1.0 atm. What is the final pressure in atmospheres if the volume is decreased to 2 L with no change in temperature and amount of gas
Answer:
2.5 atm
Explanation:
P = Pressure
V = Volume
P1V1 = P2V2
1 x 5 = P2 x 2
5 = P2 x 2
Divide both sides by 2
5/2 = P2 x 2/2
P2 = 2.5
Predict what would happen if a scientist added potassium to a dilute acid.
Potassium reacts with dilute hydrochloric acid to give potassium chloride and hydrogen gas. Heating small pieces of Potassium in air results in the substance melting without any flame being seen and turning instantly into a mixture of potassium peroxide and potassium super oxide.
A Potassium Reaction involves a process in which Potassium is mixed with another substance which react to form something else. Reactions are manifested by the disappearance of properties characteristic of Potassium and the appearance of new properties in the new substance or Compound.
The substances initially involved in a reaction are called reactants or reagents. The most important of the Potassium compounds is Potassium chloride (KCl) which is used in the production of fertilizers and chemicals and also as a salt substitute. Other important compounds are Potassium nitrate (KNO3), also known as saltpeter which is used in the production of gunpowder, fertilizers and pyrotechnics and Potassium hydroxide (KOH) is used to make detergents and soaps. Reactions are described with Chemical Formula and Equations.
Jonny Jonny.
Yes papa?
Eating Sugar?
What comes next?
(A) Yes Papa
(B) No Mama
(C) Yes Mama
(D) No Papa
Answer:
(B) No papa
arafgzhzhsjdjkskbdjzjsj
Answer:
(D) No Papa
Explanation:
is this even chemistry pffttt
Can someone answer this ASAP?
Carbon has unique bonding characteristics that allow it to
A
form ionic bonds with any atom to form many different molecules.
B
resist bonding with other atoms and remain a pure element.
С
form chains or rings by bonding to itself and other atoms.
D
form ionic salts that make up half of the known salts on Earth.
Answer:
С. form chains or rings by bonding to itself and other atoms.
Explanation:
Carbon is an element in group 4 of the periodic table with unique bonding properties. Carbon posseses 4 valence electrons in its outer shell. This enables carbon to form covalent bonds with the atoms of other elements e.g. nitrogen, phosphorus, oxygen, hydrogen etc.
Carbon can also combine covalently with other carbon atoms i.e. C-C to form long chains and rings in a process called CATENATION. This unique property of carbon makes it the only element that can form so many different compounds.
Which statement accurately describes the evidence that scientists gather using fossils? Check all that apply.
Complete question is;
Which statements accurately describe the evidence that scientists gather using fossils? Check all that apply.
A) The fossil record can be used to date rocks.
B) Living things with many cells have always lived on Earth.
C) Simple organisms are found only in young rocks.
D) Geologists study ancient remains of plants and animals.
E) Scientists can figure out what ancient living things ate.
F) Pollen and seeds help provide clues about ancient climates.
Answer:
A) The fossil record can be used to date rocks
E) Scientists can figure out what ancient living things ate.
F) Pollen and seeds help provide clues about ancient climates
Explanation:
In scientific research, fossils are sometimes referred to as animals and plant. Now, in studying records of fossils, it will be easy to know the length of existence of living things on the Earth. Also, we can be able to identify the manner in which different relationships exists between plants and animals by predicting their lifestyles, location of their habitation e.t.c which can be used to predict the old time climates.
Looking at the options given in relation to the explanation given, options A, E & F are correct
El tipo de enlace se puede determinar mediante la diferencia de electronegatividades de los átomos que lo forman. Basado en eso, si se unen un átomo de Calcio y un átomo de Bromo, el enlace será del tipo:
Answer:
Cuando se unen un átomo de calcio y un átomo de bromo, forman bromuro de calcio que se compone de Ca2 + y 2Br-. El tipo de enlace que se forma es el enlace iónico.
