3.00 m^3 of water is at 20.0°C.
If you raise its temperature to
60.0°C, by how much will its
volume expand?
Water
B = 207•10-6 0-1
(Unit = m^3)

Answer:

F = 1094.4 N

Explanation:

From impulse - momentum theorem, we now that ;

Impulse = momentum

Where;

Formula for impulse = force (F) × time(t)

Momentum = mass(m) × velocity(v)

Now, we are given;

Mass of swimmer; m = 72 kg

Speed; v = 3.8 m/s

Time; t = 0.25 s

Thus;

F × t = mv

F = mv/t

F = (72 × 3.8)/0.25

F = 1094.4 N

This value of force is the magnitude of the average horizontal force by diver on the raft.

Answer:

GAMMA RAYS:

A photon emitted spontaneously by a radioactive substance also : a photon of higher energy than that of an X-ray.

USES OF GAMMA RAYS:

Gamma rays are used in medicine (radiotherapy), industry (sterilization and disinfection), and the nuclear industry. Shielding against gamma rays is essential because they can cause diseases to skin or blood, eye disorders, and cancers.

Answer:

Explanation:

First job is to convert 72 km/hr to m/s:

[tex]72\frac{km}{hr}[/tex] × [tex]\frac{1000m}{1km}[/tex] × [tex]\frac{1hr}{3600s}[/tex] = 2.0 × 10¹ m/s

Now to find the acceleration which is

[tex]a=\frac{v_f-v_0}{t}[/tex] and filling in:

[tex]a=\frac{2.0*10^1-0}{11.5}=1.7\frac{m}{s^2}[/tex] That's part a. Part b want to know how far the car can get in 11.5 seconds (because that's the time it takes for the car to get to 72 km/hr). Since we know that the car can get 2.0 × 10¹ meters in 1 second, that means that in 11.5 seconds, the car can get 11.5(2.0 × 10¹) which is 230 meters.

Answer:

Explanation:

qoe39rwecwurbq;7edfqbsi

Answer:

9 seconds

Explanation:

[tex]acceleration = \frac{final \: speed - initial \: speed}{time \: taken} [/tex]

[tex]5km/ hr/ s = \frac{45 - 0 (km/ h)}{t} [/tex]

cross multiplying

[tex]5t = 45 secs \\ t = 9 \: secs[/tex]

it will take 9secs for the car to go from 0 to 45 km/ h

Question

Using atomic weight, crystal structure, and atomic radius data tabulated inside the front cover of thebook, compute the theoretical densities of aluminum (Al), nickel (Ni), magnesium (Mg), and tungsten (W), and thencompare these values with the measured densities listed in this same table. The c/a ratio for magnesium is 1.624.

Explanation:

Answer:

I = 0.2 A

Explanation:

Lamp is rated at 300 mA

I_lamp = 0.3 A

Voltage is; V = 3V

Thus; Resistance is given by;

R = V/I

R = 3/0.3

R = 10 ohms

Now, since the ammeter of 5 ohms is connected in series with the lamp. Thus equivalent resistance;

R_eq = 10 + 5

R_eq = 15 ohms

Ammeter current will be;

I = V/R_eq

I = 3/15

I = 0.2 A

Dark matter and dark energy described as dark because of its no interaction with electromagnetic field.

Dark matter is called "dark" because it does not interact with the electromagnetic field. This means that it does not absorb, reflect, or emit electromagnetic radiation and therefore, it is difficult to detect.

So we can conclude that dark matter and dark energy described as dark because of its no interaction with electromagnetic field like dark substances.

Learn more about matter here:https://brainly.com/question/3998772

#SPJ1

Dark matter and dark energy are described as dark because it doesn't seem to interact with the electromagnetic field.

The matter is a material that fills space and has inertia. Modern physics states that matter is made up of several kinds of particles, each of which has a mass and size.

The electron, proton, and neutron are three of the most well-known instances of material particles. Atoms are made up of combinations of these particles.

Dark matter is so-called because it doesn't seem to interact with the electromagnetic field.

This means it doesn't generate electromagnetic radiation like light or absorb electromagnetic radiation as it does. As a result, it is hard to detect.

Hence, dark matter and dark energy are described as dark.

To learn more about the matter refer;

https://brainly.com/question/4513444

#SPJ1

Answer:

B

Explanation:

Answer:

b

Explanation:

bc

Answer:

Yes

Explanation:

Many scientists believe that the universe is expanding at an increasing rate. Scientists cannot explain how the universe is expanding at an increasing rate because by law of conservation of energy, there is only a finite amount of energy. Thus, scientists have called this new source of energy dark matter and it is all around the universe helping shape and form the universe.

Answer:

More than two million electron volts.

Explanation:

More than two million electron volts energy are needed to break or split a deuteron into a proton and a neutron. Nuclear binding energy is the type of energy that is required to split an atom's nucleus into protons and neutrons. The deuteron is an isotope of hydrogen that is composed of a proton and a neutron and it is a stable particle. Very huge amount of energy is needed for the splitting of nucleus due to the presence of heavy particles i.e. proton and neutron.

Explanation:

Hydraulic Pressure-Control, On-Off Deluge Valve

FP-400Y-5DC

The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.

Answer:

Acceleration is 1.2 m/s^2.

Explanation:

initial velocity, u = 0

distance, d = 60 m

time, t = 10 s  

Let the acceleration is a.

use second equation of motion

[tex]s= u t +0.5 at^2\\\\60 = 0 + 0.5 \times a \times 10\times 10\\\\a = 1.2 m/s^2[/tex]

Now according to the Newton's second law

Force = mass x acceleration

Let the mass is m.

F = m x 1.2 = 1.2 m Newton  

Answer:

A vector can be written as:

(R, θ)

Where R is the magnitude, in this case, we know that the magnitude of the displacement is 5m

Then:

R = 5m

and θ defines the direction, it's an angle measured from the positive x-axis.

(In the image, θ would be the angle located at the point A)

Now, if you look at the image, you can see a triangle rectangle.

Where the adjacent cathetus has a length of 4,

the opposite cathetus has a length of 3 units

the hypotenuse has a length of 5 units.

So we can use any trigonometric rule to find the value of θ, like:

sin(θ) = (opposite cathetus)/hypotenuse

Then:

sin(θ) = 3m/5m

Now we can use the inverse sin function, Asin(x), in both sides

Asin( sin(θ)) = θ = Asin( 3/5) = 36.87°

then the vector is:

(5m, 36.87°)

Now, if we define the positive y-axis as the North, and the positive x-axis as the East.

This vector would point at 36.87° North of East.

(or almost Northeast)

Answer:

a) 98.1 Joules

b) 49.05 N × sin(θ)

c) 9.81 × sin(θ)

d) The velocity of the block at the bottom of the plane, v is approximately 6.264 m/s

e) 98.1 Joules

Explanation:

The given parameters of the block are;

The mass of the block, m = 5.0 kg

The distance down the plane the block slides, h = 2.0 m

The friction between the block and the surface = 0

Let θ represent the angle of inclination oof the plane

a) The gravitational potential energy, P.E. = m·g·h

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

∴ P.E. ≈ 5.0 kg × 9.81 m/s² × 2.0 m = 98.1 Joules

The gravitational potential energy, P.E. ≈ 98.1 Joules

b) The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex], is given as follows;

[tex]w_{\parallel}[/tex] = w × sin(θ) = m·g·sin(θ)

∴ [tex]w_{\parallel}[/tex] ≈ 5.0 kg × 9.81 m/s² × sin(θ) = 49.05 × sin(θ) N

The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex] ≈ 49.05 N × sin(θ)

c) The component of the weight along the inclined plane = The force with which the block moves along the inclined plane, therefore;

[tex]w_{\parallel}[/tex] = m·g·sin(θ) = m·a

Where a represents the acceleration of the block along the plane

Therefore, by comparison, we have;

g·sin(θ) = a

∴ a ≈ 9.81 × sin(θ)

d) Given that the motion of the block is 2.0 m downwards, we have;

The velocity of the block at the bottom of the plane, v² = 2·g·h

Therefore, v² ≈ 2 × 9.81 m/s²× 2.0 m = 39.24 m²/s²

v = √(39.24 m²/s²) ≈ 6.264 m/s

e) The kinetic energy at the bottom of the plane, K.E. = (1/2)·m·v²

∴ K.E. = (1/2) × 5.0 kg × 39.24 m²/s² = 98.1 J

Answer:

Because Moon and Mars has no atmosphere.

Explanation:

Moon and Mars has no atmosphere, so there is no friction on the falling object due to the atmosphere. The speed of the falling object is more at Moon and Mars.

When a small object impact on the surface of moon or Mars with high speed, the size of crater is large than the earth as out earth has atmosphere.

Answer:

The factors of production include Land, Labour, Capital and Enterpreneurship

Explanation:

The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.

The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.

Explanation:

Answer:

A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.

Answer:

dependent: the outcome of the experience

independent variable: everything literaly.

Independent is where you change some variables and see the result

Dependent is literaly the result, or the outcome dependent on the exprience.

Explanation:

I got u.

Explanation:

distance travelled = average speed x time

                               =30m/s*100s

                                =3000m

Answer:

3000m

Explanation:

30m/s*100s

3000m

Answer:

The correct option is (a) "potential difference".

Explanation:

EMF is an Electromotive force. It is the energy per unit electric charge that is imparted by an energy source, such as an electric generator or a battery. One of the terminals of device is positive and other is negative. It is also defined as  terminal potential difference when no current flows.

It is actually a potential difference across the terminals.

Answer:

potential difference

Explanation:

Answer:

mass= 0.1993 kg

Explanation:

Using the formula c = Q / (mΔT)

Answer:

the mass of the body is 0.02 kg.

Explanation:

Given;

relative density of the oil, [tex]\gamma _0[/tex] = 0.875

mass of the object in oil, [tex]M_o[/tex] = 0.013 kg

mass of the object in water, [tex]M_w[/tex] = 0.012 kg

let the mass of the object in air = [tex]M_a[/tex]

weight of the oil, [tex]W_0 = M_a - 0.013[/tex]

weight of the water, [tex]W_w = M_a - 0.012[/tex]

The relative density of the oil is given as;

[tex]\gamma_0 = \frac{density \ of \ oil }{density \ of \ water} = \frac{W_0}{W_w} = \frac{M_a -0.013}{M_a -0.012} \\\\0.875 = \frac{M_a -0.013}{M_a -0.012}\\\\0.875(M_a - 0.012) = M_a - 0.013\\\\0.875M_a - 0.0105 = M_a -0.013\\\\0.875M_a - M_a = 0.0105 - 0.013\\\\-0.125 M_a = -0.0025\\\\M_a = \frac{0.0025}{0.125} \\\\M_a = 0.02 \ kg[/tex]

Therefore, the mass of the body is 0.02 kg.

Answer:

For smooth surface:The light rays bounce off the table and all move in the same direction.

Answer:

C) Potential energy due to intermolecular forces.

Answer:

B. 5, 1, 4, 3, 6, 2

Explanation:

Acetylcholine (ACh) is a molecule that functions as a neurotransmitter and plays diverse roles in brain and muscle function. Ach is released by the presynaptic neurons into the synaptic cleft. The nicotinic acetylcholine receptors are ACh ligand-gated ion channels located at the postsynaptic membrane which admit both sodium (Na+) and potassium (K+) ions. These receptors bind ACh, increasing the permeability of the postsynaptic membrane to Na+ and K+ ions. In consequence, ion channels open and sodium (Na+) ions enter the postsynaptic cell, causing the postsynaptic membrane to depolarize. An enzyme known as acetylcholinesterase breaks down acetylcholine into acetate and choline. If depolarization passes a threshold potential, an action potential is generated in the postsynaptic membrane. The generation of a postsynaptic potential at the excitatory synapse is known as excitatory postsynaptic potential. Once depolarization is complete, Na+ channels close and membrane permeability to Na+ ions declines to the resting levels.

In component form, the displacement vectors become

• 350 m [S]   ==>   (0, -350) m

• 400 m [E 20° N]   ==>   (400 cos(20°), 400 sin(20°)) m

(which I interpret to mean 20° north of east]

• 550 m [N 10° W]   ==>   (550 cos(100°), 550 sin(100°)) m

Then the student's total displacement is the sum of these:

(0 + 400 cos(20°) + 550 cos(100°), -350 + 400 sin(20°) + 550 sin(100°)) m

≈ (280.371, 328.452) m

which leaves the student a distance of about 431.8 m from their starting point in a direction of around arctan(328.452/280.371) ≈ 50° from the horizontal, i.e. approximately 431.8 m [E 50° N].

Answer 60 NEWTON

Explanation:

FORCE = MASS * acceleration

acceleration= VELOCITY / TIME

acceleration= 30 / 10 = 3   M/S2

FORCE = MASS * acceleration

FORCE = 20 *3 = 60 NEWTON