3.00 m^3 of water is at 20.0°C.
If you raise its temperature to
60.0°C, by how much will its
volume expand?
Water
ß = 207•10-6C-1
(Unit = m^3)

Answer:

[tex]\triangle \phi=461.5rad[/tex]

Explanation:

From the question we are told that:

Silt width [tex]w=0.15=>0.1510^{-3}[/tex]

Wavelength [tex]\lambda=462nm=462*10^{-9}[/tex]

Angle [tex]\theta=26.9[/tex]

Generally the equation for Phase difference is mathematically given by

[tex]\triangle \phi=\frac{2 \pi}{\lambda}(\frac{wsin\theta }{2})[/tex]

[tex]\triangle \phi=\frac{2 \pi}{462*10^{-9}}(\frac{0.1510^{-3}*sin 26.9 }{2})[/tex]

[tex]\triangle \phi=461.5rad[/tex]

[tex]\triangle \phi=146.89\pi[/tex]

Answer: Rods

Explanation:

The rod cells in the retina are the reason we are able to see at night and in dim light. They exist on the edges of the retina which is why they are also very useful for the peripheral vision of a human.

Rod cells number over 90 million in the eyes and although very useful for seeing in dimmer light, they are not very useful for color vision which is why humans see less colors in the dark.

Answer:

[tex]{ \bf{power \: { \tt{(watts)}} = \frac{workdone \: { \tt{(joules)}}}{time \: { \tt{(seconds)}}} \: }}[/tex]

Answer:

519.62 m/s

Explanation:

Applying,

v = √(T/m').............. Equation 1

Where v = velocity of the wave, T = Tension on the string, m' = mass per unit length of the string

From the question,

Given: T = 1350 N, m' = 0.005 kg/m

Substitute these values into equation 1

v = √(1350/0.005)

v = √(270000)

v = 519.62 m/s

Answer:

The reason it has few heavier elements is due to the fact that it's stars are widely spaced and this implies that it's stars have very low rate of formation and termination.

Explanation:

The Small Magellanic Cloud, is basically a very tiny galaxy located near the Milky Way. Although it's tiny, it's diameter is approximately 7,000 light-years while it also contains over hundred million stars which are widely spaced.

Now, the reason it has few heavier elements is due to the fact that it's stars are widely spaced and this implies that it's stars have very low rate of formation and termination.

Answer:

Value closest to 1

Explanation:

It is described from the scenario above that ice cream sales decreases as the outside temperature increases, hence showing a strong relationship between both variables (icream sales and temperature). The correlation Coefficient is a metric used in regression modeling to depict the strength of relationship between two variables, (The dependent and independent variables). Correlation Coefficient ranges from (-1 to +1). With values close to 1 or - 1. Also the positive and negative signs are used to show the type of relationship between the variables. If an increase in variable A leads to a decrease in variable B, then we have negative correlation (-) ; while an increase or decrease in both variables depicts a positive correlation. The most likely correlation Coefficient for the study above will be a positive value which is close to 1 since the relationship is described as strong.

Answer:

True.

Explanation:

The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.

Answer:

2 cm.

Explanation:

Please see attached photo for diagram.

In the attached photo, y is the distance from the pivot to which the 25 g is placed.

The value of y can be obtained as follow:

Clockwise moment = 5 × 10

Anticlock wise moment = y × 25

Anticlock wise moment = Clockwise moment

y × 25 = 5 × 10

y × 25 = 50

Divide both side by 25

y = 50/25

y = 2 cm

Thus, the distance is 2 cm

Answer:

Let the initial charges be q1 and q2 respectively.

After they come in contact, the charges are rearranged such that they acquire same charge.

let us say that charge on each of them is Q.

They are again brought apart at a distance of 0.9 m. Hence, the force between them will be given as

F = kQ2 / r2

0.025 = (9×109 x Q2) / 0.92

Q2 = 0.025 x 0.92 / 9×109

Q = 1.5 x 10-6 C

Explanation:

hey buddy, ❤can u plz subscribe to my UTube channel gtron9528 plz

Answer:

the efficiency of the machine is 100%

Explanation:

Given;

load, L = 750 N

length of the lever, L = 2 m

effort applied, E = 250 N

Position of the load from the fulcrum,  = 50 cm

                                     50cm

     0↓--------------------------Δ-------------------------------↓---------200 cm

    750 N                                       x cm                 250 N

Apply the principle of moment;

750(50) = 250(x)

x = (750 x 50) / (250)

x = 150 cm

the distance of the effort = 150 cm = 1.5 m

the distance of the load = 50 cm = 0.5 m

The velocity ratio of the machine = 1.5/0.5

                                                        = 3

The mechanical advantage of the machine is calculated as;

M.A = Load/effort

M.A = 750 / 250

M.A = 3

The efficiency of the machine is calculated as;

E = (M.A / V.R) x 100%

E = (3/3) x 100% = 100%

Therefore, the efficiency of the machine is 100%

Question

Using atomic weight, crystal structure, and atomic radius data tabulated inside the front cover of thebook, compute the theoretical densities of aluminum (Al), nickel (Ni), magnesium (Mg), and tungsten (W), and thencompare these values with the measured densities listed in this same table. The c/a ratio for magnesium is 1.624.

Explanation:

26. D. crushing the sugar cube and dissolving it in water.

27. A. atom

28. B. molecule

29. B. plum pudding model of Joseph John Thomson

30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons

31. D. protons and neutrons are relatively heavier than electrons.

Explanation:

Obviously vector quantity

Answer:

F = 9.177*10^-9N

Explanation:

Gravitational force between the two bodies is expressed as;

F = GMm/r²

Given tha

M = 55kg

m = 10kg

r = 2m

G = 6.67408 × 10-11 m³ kg-1 s-2

Substitute;

F = GMm/r²

F = 6.67408 × 10-11*55*10/2²

F = 3,670.744× 10-11/4

F = 9.177*10^-9N

Answer:

The sun uses hydrogen for nuclear fusion.

Answer:

Hydrogen

Explanation:

Answer:

ocean wave

hope it helped you

Answer:

We need standard unit for measurement to make our judgement more reliable and accurate. For proper dealing, measurement should be same for everybody. Thus there should be uniformity in measurement. For the sake of uniformity we need a common set of units of measurement, which are called standard units.

Answer:

To explore the other planets, the satellite must have the velocity more than the escape velocity.

Explanation:

The minimum velocity required by any object to escape from the earth gravitational pull is called the escape velocity.

The escape velocity for any planet depends on the mass of planet and radius of planet. It does not depends on the mass of object. The escape velocity is same for any mass for a particular planet.

So, to explore the other planets, the satellite must have the velocity more than the escape velocity.

Answer:

The measurement of first cylinder is more accurate.(A)

Explanation:

The least possible error higher will be accuracy.

Answer:

T₂ = 305.17 K

Explanation:

Given that,

Heat, Q = 6000 J

Mass, m = 200 gram

Initial temperature, T₁ = 25° C

We need to find its final temperature. Let it is T₂.

We know that,

[tex]Q=mc\Delta T[/tex]

Where

c is the specific heat of water, c = 4.18 J/g°C

So,

[tex]6000=200\times 4.18\times (T_2-298)\\\\\dfrac{6000}{200\times 4.18}=(T_2-298)\\\\7.17=(T_2-298)\\\\7.17+298=T_2\\\\T_2=305.17\ K[/tex]

So, the final temperature is equal to 305.17  K.

Answer:

     U = 3.59 10⁻⁹ J

Explanation:

Electric potential energy is

             U = k ∑ [tex]\frac{q_iq_j }{r_i_j}[/tex]

in this case

            U = k (q₁q₂ / r₁₂ + q₁q₃ / r₁₃ + q₂q₃ / r₂₃)

the distances are

            r₁₂ = 1.15

            r₁₃ = 1.15 +2.88 = 4.03 m

            r₂₃23 = 2.88

we substitute

            U = 9 109 (2 10-5 3.8 10-6 / 1.15 + 2 10-5 5.30 10-5 / 4.03 + 3.8010-6 53 010-5 / 2.88)

             U = 9 109 (6.609 10-11 + 2.63 10-10 + 6.99 10-11)

            U = 9 109 (39,899 10-11)

            U = 3.59 10⁻⁹ J

Answer:

Q2 = 0.0346 J

Explanation:

I don't know what Q1 is but I did solve for Q2. I'm using this because no other question has been asked to solve for Q2 :)

Answer:

when we add elements in a series circuit the voltage across each element decreases

Explanation:

In a series circuit the current the whole circuit is the same, since there is only one path,

resistance is the sum of the resistance of each element

          R_{eq} = ∑ R_i

if we write ohm's law

          V = i R_{eq}

we substitute

          V = i ∑ R_i

therefore the total voltage is

         V = ∑ i R_i = ∑ V_i

With this expression we see that the voltage decreases as we place more elements in the series circuit.

Specifically when we fear two elements the voltage across each element is

           V_i = V / 2

when we have 5 elements the voltage across each element is

           V_i = V / 5

therefore when we add elements in a series circuit the voltage across each element decreases

Answer:

I believe in aliens but I do not think everyone should. I started to believe in aliens since the US government said they would be taking extraterrestrial life seriously. They will be in our lives sooner or later, so we shouldn't be ignoring their presence. I believe them because surveys show that nearly half of Americans believe that aliens have visited the Earth, either in the ancient past or recently. That percentage has been increasing. Belief in alien visitation is greater than belief that Bigfoot is a real creature, but less than belief that places can be haunted by spirits. Also there have been a lot of UFO sightings, and a Navy Jet has a video of that as well. These small things is just hard to ignore, and they make me and hopefully others believe in aliens.

Answer:

$900

Explanation:

Step 1: Our output value is 9000.

Step 2: We represent the unknown value with x.

Step 3: From step 1 above,$9000=100\%$

Step 4: Similarly, x=10%

Step 5: This results in a pair of simple equations:

$9000=100

Step 6: By dividing equation 1 by equation 2 and noting that both the RHS (right hand side) of both

equations have the same unit (%); we have

\frac{9000}{x}=\frac{100\%}{10\%}

Step 7: Again, the reciprocal of both sides gives

\frac{x}{9000}=\frac{10}{100}$

\Rightarrow x=900$

Therefore, $10\%$ of $9000$ is $900$

unknown value with x

step 1 above,$9900=100%

similarly ,x=10%

Answer:

Nuclear fusion in the Sun's core causes the release of tremendous amounts of energy that leads to very high temperatures and pressure which is much hotter and higher than the temperature and pressure at the exterior surface of the Sun causing the particles in the inner core region to push outwards towards the Sun's surface

Explanation:

Answer:

C. 9.9 cm

Explanation:

The location of the object, u = 14 cm

The location of the image, v = 5.8 cm

The focal length of the mirror, f = Required

The mirror formula for a convex mirror is given as follows;

[tex]\dfrac{1}{u} -\dfrac{1}{v} = -\dfrac{1}{f}[/tex]

Therefore, we get;

[tex]\dfrac{1}{14 \ cm} -\dfrac{1}{5.8 \ cm} =- \dfrac{41}{406 \ cm} = -\dfrac{1}{f}[/tex]

Therefore;

[tex]f = \dfrac{406 \ cm}{41} \approx 9.9 \ cm[/tex]

The focal length of the mirror, f ≈ 9.9 cm

Answer:

the brightest found are Blue - White with

Explanation:

The energy emission of objects increases with their temperature, specifically Wien described the process in an expression

          [tex]\lambda_{maximum}[/tex] T = 2,898 10⁻³

With this expression we can find the temperature of the stars by the color they emit.

Specifically the Sun has a color of 550 nm which corresponds to 5400K

bright stars have a BLUE color corresponding to 7500K

the brightest found are Blue - White with a temperature of 20000K

it will hit the ground maybe in like 1 second I guess