3. What color of laser light shines through a diffraction grating with a line density of 500 lines/mm if the third maxima from the central maxima (m=3) is at an angle of 45°?

Answer:

All electromagnetic waves travel at the same speed in a vacuum

Explanation:

All the wave listed in the question are electromagnetic waves. The speed of electromagnetic waves (collectively called light) in a vacuum is fixed. Its value is 3×10^8 ms^-1. This is a constant for all electromagnetic waves irrespective of their frequency.

Hence for any electromagnetic wave, its speed is 3×10^8 ms^-1, this will be the common velocity of all the electromagnetic waves listed in the question in a vacuum thus we can not rank them according to speed.

Answer:

The  length is  [tex]l = 8.6 \ m[/tex]

Explanation:

From the question we are told that

   The frequencies of the two successive harmonics are [tex]f_1 = 220 \ Hz[/tex] ,  [tex]f_2 = 240 \ Hz[/tex]

   The speed of sound in the air is  [tex]v_s = 343 \ m/s[/tex]

Generally the frequency of a given harmonic is mathematically represented as

     [tex]f_n = \frac{n v }{2l}[/tex]

Here  n defines  the position of the harmonics

Now since the position of both harmonic is not know but we know that they successive then we can represented them mathematically as

    [tex]220 = \frac{n v}{2l}[/tex]

and  

     [tex]240 = \frac{(n+1) v}{2l}[/tex]

So

   [tex]\frac{(n + 1 ) v}{2l} - \frac{n v}{2l} = 240-220[/tex]

=>  [tex]\frac{v}{2l} = 20[/tex]

=>   [tex]l = 8.6 \ m[/tex]

Answer:

Repulsion

Explanation:

Answer:

t₀ = 1.55 s

Explanation:

According to Einstein's Theory of Relativity, when an object moves with a speed comparable to speed of light, the time interval measured for the event, by an observer in  motion relative to the event is not the same as measured by an observer at rest.

It is given as:

t = t₀/[√(1 - v²/c²)]

where,

t = time measured by astronaut in motion = 3.1 s

t₀ = time required according to observer on earth = ?

v = relative velocity = 0.87 c

c = speed of light

3.1 s = t₀/[√(1 - 0.87²c²/c²)]

(3.1 s)(0.5) = t₀

t₀ = 1.55 s

Answer:

Explanation:

Time interval required for this rotation according to an observer on the Earth is given as [tex]\delta t[/tex]

where,

[tex]t_o = 3.1\\\\v = 0.87[/tex]

[tex]\delta t = \frac{t_o}{\sqrt{1-\frac{v^2}{c^2}}}\\\\\delta t = \frac{3.1}{\sqrt{1-(\frac{0.87c}{c})^2}}\\\\\delta t = 6.29sec[/tex]

For more information visit

Answer:

The work done by the system is 550 J

Explanation:

Given;

heat added to the system, Q = 550 J

Apply the first law of thermodynamics;

ΔU = Q - W

Where;

ΔU is change in internal energy

Q is the heat added to the system

W is the work done by the system

During an isothermal process, the temperature of the system is constant for the entire process. During this process, the change in the internal energy is zero.

0 = Q - W

W = Q

W = 550 J

Therefore, the work done by the system is 550 J

Answer:

Explanation:

For the car to turn at the about the centripetal force must not be greater than the static friction between the tires and the road

we will use the expression relating centripetal force and static friction below

let U represent the coefficient of static friction

Given that

U= 0.50

mass m= 1200-kg

radius r= 94.0 m

Assuming g= 9.81 m/s^2

[tex]U*m*g=\frac{mv^2}{r}[/tex]

[tex]U*g=\frac{v^2}{r}[/tex]

substituting our given data in to expression we can solve for the speed V

[tex]0.5*9.81=\frac{v^2}{94}[/tex]

making v the subject of formula we have

[tex]0.5*9.81=\frac{v^2}{94}\\\v= \sqrt{0.5*9.81*94} \\\\v= \sqrt{461.07} \\\\v= 21.47[/tex]

v= 21.47m/s

hence the maximum velocity of the car is 21.47m/s

Explanation:

Given that,

Frequency of LCR circuit is 120 Hz

RMS voltage, [tex]V_{rms}=82\ V[/tex]

Resistance of circuit, R = 71 Ω

Impedance, Z = 107 Ω

We need to find the average power is delivered to the circuit by the source. Firstly, finding the rms value of current,

[tex]I_{rms}=\dfrac{V_{rms}}{Z}\\\\I_{rms}=\dfrac{82}{105}\\\\I_{rms}=0.78\ A[/tex]

Power is given by :

[tex]P=I_{rms}V_{rms}\cos\phi[/tex]

[tex]\cos\phi = \dfrac{R}{Z}\\\\\cos\phi = \dfrac{71}{105}\\\\\cos\phi =0.676[/tex]

Now, power,

[tex]P=0.78\times 82\times 0.676\\\\P=43.23\ W[/tex]

So, the average power of 43.23 watts is delivered to the circuit by the source.

Answer:

0.7707

Explanation:

From Snell's law,

n(1) * sin θ1 = n(2) * sinθ2

Where n(1) = refractive index of air = 1.0003

θ1 = angle of incidence

n(2) = refractive index of second substance

θ2 = angle of refraction

The angle of reflection through the unknown substance is the same as the angle of incidence of air. Thus this means that θ1 = 29°

=> 1.0003 * sin29 = n(2) * sin39

n(2) = (1.0003 * sin29) / sin39

n(2) = 0.7707

Explanation:

The index of refraction n of the substance is 0.7707

Here we know that

n(1) * sin θ1 = n(2) * sinθ2

here

n(1) = refractive index of air = 1.0003

θ1 = angle of incidence

n(2) = refractive index of second substance

θ2 = angle of refraction

The angle of reflection should be via the unknown substance that represent the same as the angle of incidence of air.

So,

θ1 = 29°

1.0003 * sin29 = n(2) * sin39

n(2) = (1.0003 * sin29) / sin39

n(2) = 0.7707

learn more about refraction here: https://brainly.com/question/21312906

Answer:

Here,

v (final velocity) = 0

u (initial velocity) = u

a = ?

s = 1m

t = 0.4s

using the first equation of motion,

0 = u + 0.4a

= -0.4a = u

using the second equation of motion:

1 = 0.4u + 0.08a

from the bold equation

1 = 0.4(-0.4a) + 0.08a

1 = -0.16a + 0.08a

1 = -0.08a

a = -1/0.08

a = -100/8

a = -12.5 m/s/s

please make me brainly, i am 1 brainly away from the next rank

Answer:

3.4093

Explanation:

NPSHa = hatm + hel + hf +hva

the elevation head is the hel

friction loss head is hf

NPSHa is the head of vapour pressure of fluid

atmospheric pressure head is hatm

log₁₀P* = [tex]A -\frac{B}{C+T}[/tex]

[tex]A, B, C are fixed[/tex]

log₁₀Pv = [tex]4.07827-\frac{1343.943}{387.15-53.773}[/tex]

= 4.07827 - 1343.943/333.377

=4.07827 - 4.0313009

= 0.0469691

we take the log

p* = 1.114218

we convert this value to get 111421.8

hvap = 111421.8 * 1/776.14 * 1/9.81

= 14.63

hatm = 1.1 *101325/1 * 1/9.81 *1/776.14

=14.64

hf = 7000/1 * 1/776.14 * 1/9.81

= 0.9193

NPSHa = 2.5

hel = 0.9193 + 2.5 + 14.63 - 14.64

hel = 3.4093

The NSPH values are used to calculate cavitation. The vapor pressure of the liquid is 1.114 atm.

The vapor pressure can be calculated by,

[tex]\mathrm {NPSH_A}= ( \frac {p_i}{\rho g} + \frac {V_i^2}{2g})- \frac {p_v}{\rho g}[/tex]

Where,

[tex]\mathrm {NPSH_A}[/tex] = available NPSH

[tex]p_i[/tex]     = absolute pressure at the inlet = 1.1 atm

[tex]V_i[/tex]     = average velocity at the inlet = 10, 000 kg/h

[tex]\rho[/tex] = fluid density = 886 kg/m3.  

g = acceleration of gravity = 9.8 m/s²

[tex]p_v[/tex] = vapor pressure of the fluid = ?

Put the values in the equation, we get

[tex]p_v = 1.114\ atm[/tex]

Therefore, the vapor pressure of the liquid is 1.114 atm.

To know more about  vapor pressure:

https://brainly.com/question/25356241

Answer:

3.67°

Explanation: Given that λ=640nm , m = 1

Considering the slit separation

d = 1cm/1000

= 1.000×10^-3cm

= 1.000×10-5m

We then have

Sinθ = mλ/d

Sinθ= (1×640×10^-9)/1.000×10-5m

Sinθ = 0.064

θ= sin-1 0.064

θ= 3.669°

= 3.67°

Answer:

24W

Explanation:

The series connection has a resistance of 2R

The parallel connection has a resistance of R/2 .. the resistance has decreased by a factor 4

Assuming the battery still provides the same pd .. the current increases by a factor of 4 .. increasing the power output by a factor of 4 also (P = V x A)

Power output = 4 x 8W .. .. So P = 24 W

Answer:

Stay the same

Explanation:

Since, friction is negligible:

Initial Momentum = Final Momentum

Initial KE = Final KE

m1 * v1 = m2 * v2

When m increases v decreases.

The momentum and kinetic energy remain the same if you drop paper clips into an open cart rolling along a straight horizontal track with negligible friction.

Between two surfaces that are sliding or attempting to slide over one another, there is a force called friction. For instance, friction makes it challenging to push a book down the floor. Friction always moves an object in a direction that is counter to the direction that it is traveling or attempting to move.

Given:

The paperclips into an open cart rolling along a straight horizontal track with negligible friction,

Calculate the momentum, Since friction is negligible,

Initial Momentum = Final Momentum

Initial Kinetic Energy = Final Kinetic Energy

m₁ × v₁ = m₁  × v₂

When m increases, v decreases,

Thus, momentum will remain the same.

To know more about friction:

https://brainly.com/question/28356847

#SPJ5

Answer:

Heat transferred = 22.9 watt

Explanation:

Given that:

[tex]T_1[/tex] = 27°C = (273 + 27) K = 300 K

[tex]T_2[/tex]= 600°C = (600 +273) K = 873 K

speed v = 2 m/s

length x = 40 cm = 0.4 cm

width = 1 cm = 0.001 m

The heat transferred from the plate can be calculate by using the formula:

Heat transferred = h×A ×ΔT

From the tables of properties of air, the following values where obtained.

[tex]k = 0.02476 \ W/m.k \\ \\ \rho = 1.225 \ kg/m^3 \\ \\ \mu = 18.6 \times 10^{-6} \ Pa.s \\ \\ c_p = 1.005 \ kJ/kg[/tex]

To start with the reynolds number; the formula for calculating the reynolds number can be expressed as:

reynolds number = [tex]\dfrac{\rho \times v \times x }{\mu}[/tex]

reynolds number = [tex]\dfrac{1.225 \times 2 \times 0.4}{18.6 \times 10^{-6}}[/tex]

reynolds number = [tex]\dfrac{0.98}{18.6 \times 10^{-6}}[/tex]

reynolds number = 52688.11204

Prandtl number = [tex]\dfrac{c_p \mu}{k}[/tex]

Prandtl number = [tex]\dfrac{1.005 \times 18.6 \times 10^{-6} \times 10^3}{0.02476}[/tex]

Prandtl number = [tex]\dfrac{0.018693}{0.02476}[/tex]

Prandtl number = 0.754963

The nusselt number for this turbulent flow over the flat plate  can be computed as follows:

Nusselt no = [tex]\dfrac{hx}{k} = 0.0296 (Re) ^{0.8} \times (Pr)^{1/3}[/tex]

[tex]\dfrac{h \times 0.4}{0.02476} = 0.0296 (52688.11204) ^{0.8} \times (0.754968)^{1/3}[/tex]

[tex]\dfrac{h \times 0.4}{0.02476} =161.4252008}[/tex]

[tex]h =\dfrac{161.4252008 \times 0.02476}{ 0.4}[/tex]

h = 9.992 W/m.k

Recall that:

The heat transferred from the plate can be calculate by using the formula:

Heat transferred = h×A ×ΔT

Heat transferred = [tex]h\times A \times (T_2-T_1)[/tex]

Heat transferred = 9.992 × (0.4 × 0.01) ×(873-300)

Heat transferred = 22.9 watt

Answer:

[tex]\Large \boxed{\sf kilo}[/tex]

Explanation:

kilo is a prefix that means [tex]1000[/tex] of the base unit.

Answer:

kilo is the correct answer

Explanation:

because my exam says sooo....

Answer:

6.13 seconds

Explanation:

At the peak of the fireworks trajectory, the velocity of the firework would be zero. Using equation of motion, we have:

v² = u² + 2gh

0 = 40² - (2)(9.81)(h)

0 = 1600 - 19.62h

19.62h = 1600

h = 1600/19.62

h = 81.55 m

Now during the process of explosion, the two parts gained equal vertical momentum but in opposite directions.

We are told the first piece lands in a time of 2.71 s,

Using 3rd equation of motion, we have;

h = ut + ½gt²

81.55 = u(2.71) + ½(9.81 × 2.71²)

81.55 = 2.71u + 36.0228

2.71u = 81.55 - 36.0228

2.71u = 45.5272

u = 45.5272/2.71

u = 16.8 m/s

The time it takes a projectile to return back to its original launch point assuming the projectile was launched

vertically with speed u = 16.8 m/s is;

t = 2u/g

t = (2 × 16.8)/9.81

t = 3.43 s

Thus total time it takes the second mass to reach the ground = 3.43 + 2.71 = 6.13 seconds

1. Which example best describes a restoring force?

B) the force applied to restore a spring to its original length

2. A spring is compressed, resulting in its displacement to the right. What happens to the spring when it is released?

C) The spring exerts a restoring force to the left and returns to its equilibrium position.

3. A 2-N force is applied to a spring, and there is displacement of 0.4 m. How much would the spring be displaced if a 5-N force was applied?

D) 1 m

4. Hooke’s law is described mathematically using the formula Fsp=−kx. Which statement is correct about the spring force, Fsp?

D)It is a vector quantity.

5. What happens to the displacement vector when the spring constant has a higher value and the applied force remains constant?

A) It decreases in magnatude.

Hope this Helps!! Sorry its late

Answer:

cross-sectional

Explanation:

The full definition of this is ''a research design in which several different age-groups of participants are studied at one particular point in time.''

Answer:

Explanation:

For image formation in objective lens

object distance u = 14 +1 = 15 mm

focal length f = 14 mm .

image distance v = ?

lens formula

[tex]\frac{1}{v} -\frac{1}{u} =\frac{1}{f}[/tex]

Putting the values

[tex]\frac{1}{v} +\frac{1}{15} =\frac{1}{14}[/tex]

v = 210 mm .

B )

magnification = v / u

= 210 / 15

= 14

size of image = 14 x 1.1 mm

= 15.4 mm

= 15 mm approx

C )

For final image to be at infinity , image produced by objective lens must fall at the focal point of eye piece . so objective lens's distance from the image formed by objective must be equal to focal length of eye piece that is 21 mm .

21 mm is the answer .

D )

overall magnification =

[tex]\frac{210}{15} \times \frac{D}{f_e}[/tex]

D = 25 cm , f_e = focal length of eye piece

= 14 x 250 / 21

= 166.67

= 170 ( in two significant figures )

(a) The distance of the image v=220mm

(b) SIze of the image 15 mm

(c) Distance of lens be from the image produced by the objective lens 21 mm

(d) overall magnification of the microscope 170

The objective lens of a microscope is the one at the bottom near the sample. At its simplest, it is a very high-powered magnifying glass, with very short focal length. This is brought very close to the specimen being examined so that the light from the specimen comes to a focus inside the microscope tube

For image formation in objective lens

object distance u = 14 +1 = 15 mm

focal length f = 14 mm .

image distance v = ?

By using lens formula

[tex]\dfrac{1}{v}+\dfrac{1}{u}=\dfrac{1}{f}[/tex]

Putting the values

[tex]\dfrac{1}{v}+\dfrac{1}{15}=\dfrac{1}{14}[/tex]

v = 210 mm .

B ) Magnification is the ratio of the size of the image to the size of the an object.

[tex]\rm magnification = \dfrac{v} { u}[/tex]

[tex]M= \dfrac{210} { 15}[/tex]

M= 14

size of image = 14 x 1.1 mm

= 15.4 mm

= 15 mm approx

C )

For final image to be at infinity , image produced by objective lens must fall at the focal point of eye piece . so objective lens's distance from the image formed by objective must be equal to focal length of eye piece that is 21 mm .

21 mm is the answer .

D )

overall magnification =

[tex]\dfrac{210}{15}\times \dfrac{D}{f_e}[/tex]

D = 25 cm , f_e = focal length of eye piece

[tex]= 14 \times \dfrac{ 250} { 21}[/tex]

= 166.67

= 170 ( in two significant figures )

Hence all the answers are:

(a) The distance of the image v=220mm

(b) SIze of the image 15 mm

(c) Distance of lens be from the image produced by the objective lens 21 mm

(d) overall magnification of the microscope 170

To know more about Objective lens follow

https://brainly.com/question/25779311

Answer:

The electric field strength needed is 4 x 10⁵ N/C

Explanation:

Given;

magnitude of magnetic field, B = 0.1 T

velocity of the charge, v = 4 x 10⁶ m/s

The velocity of the charge when there is a balance in the magnetic and electric force is given by;

[tex]v = \frac{E}{B}[/tex]

where;

v is the velocity of the charge

E is the electric field strength

B is the magnetic field strength

The electric field strength needed is calculated as;

E = vB

E = 4 x 10⁶ x 0.1

E = 4 x 10⁵ N/C

Therefore, the electric field strength needed is 4 x 10⁵ N/C

Answer:

Option (A) : Nuclear Fusion and Beta Decay (electron emission)

Answer:

A : Fusion followed by beta decay (electron emission)

Explanation:

Ap3x

Answer:

Explanation:

a )

focal length of convex spherical mirror

f = 36/2  cm = 18 cm

object distance u = - 25 cm

mirror formula

[tex]\frac{1}{v} + \frac{1}{u} = \frac{1}{f}[/tex]

[tex]\frac{1}{v} + \frac{1}{- 25} = \frac{1}{18}[/tex]

[tex]\frac{1}{v} = \frac{1}{25} + \frac{1}{18}[/tex]

v = 6.28  cm .

It is positive hence the image will be erect / upright  and formed on the back of the mirror.

For object distance of 47 cm

u = - 47 cm

Putting the values in the mirror formula

[tex]\frac{1}{v} + \frac{1}{- 47} = \frac{1}{18}[/tex]

[tex]\frac{1}{v} = \frac{1}{ 47} + \frac{1}{18}[/tex]

v = 13  cm

It is positive hence the image will be erect / upright and formed on the back of the mirror.

Answer:

Explanation:

To solve for the power consumed by the trains motor we have to employ the formula for power which is

Power= current * voltage

Given that

voltage V= 800 V

current I= 2130 A

Substituting in the formula for power we have

Power= 2130*800=  1704000 watt

Power = 1704 kW

This is the amount of energy consumed, transferred or converted per unit of time

Hence the power consumed  by the trains motor is 1704 kW

Answer:

analyze data without drawing conclusions

Explanation:

Research reports are written in order to communicate clearly, information obtained primarily from research and analysis of data.

Typical reports of scientific research endeavours are written in such a way that they convey the research process succinctly without excessive extraneous information. A report is typically made up of; summary of the contents, introduction/ background, methods, results, discussion, conclusion and recommendations.

Hence a report does not really make inferences from the research findings.

Answer:

The velocity is  [tex]v = 8.743 \ m/s[/tex]

Explanation:

From the question we are told that

    The frequency of the signal sent out  is  [tex]f_s = 38.0 \ kHz = 38.0 *10^{3} \ Hz[/tex]

    The frequency of the signal received is  [tex]f_r = 40.0 \ kHz = 40.0 *10^{3} \ Hz[/tex]

     The  speed of sound is  [tex]v_s = 341 \ m/s[/tex]

Generally the frequency of the sound received is  mathematically represented as

         [tex]f_r = f_s [\frac{v_s + v}{v_s - v} ][/tex]

where v is the velocity of the object

       =>      [tex]40 *10^{3} = 38 *10^{3} * [\frac{341 + v}{341 - v} ][/tex]

       =>      [tex]1.05263 = \frac{341+v }{341-v}[/tex]

       =>   [tex]358.94 - 1.05263v = 341 + v[/tex]

      =>    [tex]17.947 = 2.05263 v[/tex]

      =>    [tex]v = 8.743 \ m/s[/tex]

Answer:

when a magnetic field near the floors points down and is increasing then the electric field curl (a) clockwise.

Explanation:

The magnetic field this is the area that is around a magnet  which there is presence of magnetic force. The Moving electric charges can create magnetic fields.  we say In physics, that the magnetic field is a field that passes through space and which makes a magnetic force move electric charges.

The Non-coulomb electric field curls ; ( B ) counterclockwise

Non-coulomb electric field also known as induced EMF is the Negative time rate of change of a magnetic flux in a closed loop through the loop. Non-coulomb electric field is expressed as ; Fnc = qEnc

Given that the magnetic field points downwards and the value of the electric field ( ε ) is increasing ( i.e.  ε > 0  ) The direction of the non-coulomb electric field will curl in a counter-clockwise direction.

Hence we can conclude that The Non-coulomb electric field curls in a counterclockwise direction.

Learn more :  https://brainly.com/question/12975267

Answer:

5.29×10^-7

Explanation:

shear stress τ = F/ A

shear deformation δ = (VL)/ (AG)

= (τL)/ G

V=shear force

L=height of disk=6.50×10^-2

A=cross sectional area

G= shear modulus= (1.60x10^9N/m^2)

A=πd^2/4

Then substitute the values we have

4×(375N)(0.00750m)

________________ = δ

(π*0.00650^2)(1.60x10^9N/m^2)

= 5.29×10^-7

Answer:

only in or near star-forming clouds

Explanation:

Answer:

c. 1.11 m/s down

Explanation:

Momentum is conserved.

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Assuming the balloon and projectile are originally at rest:

(90 kg) (0 m/s) + (10 kg) (0 m/s) = (90 kg) v + (10 kg) (10 m/s)

0 kg m/s = (90 kg) v + 100 kg m/s

v = -1.11 m/s

Answer:

386.13 N

Explanation:

The kinetic energy of the baseball is converted into workdone in moving the glove backward( work energy theorem).

Therefore, KE of the ball

[tex]\frac{1}{2} mv^2 =\frac{1}{2}(0.145)35^2\\ = 88.81 \text{J}[/tex]

Now, workdone in moving the glove

W= Fd

where F = Force applied, d = displacement of the glove= 0.23 cm.

88.81 = F×0.23

F= 88.81/0.23 = 386.13 N