Answer:
B. Watermelon
Explanation:
Watermelon is the only option with a definite shape that wouldn't change if you put it in a bowl
Which equilibrium describes a reversible reaction a short time after starting the reaction with reactants only?
Answer:
Should be A
Explanation:
A typical cell phone uses wavelength of 0.36meters. How much energy does this wave have?
Answer:
55×10^-26 J
Explanation:
We can calculate the energy of the wave from
E= hc/λ
Where
h= Planks constant = 6.6×10^-34 Is
c= speed of light = 3×10^8 ms-1
λ= wavelength of the wave = 0.36 metres
Recall that cell phone use radio waves which belong to the electromagnetic spectrum hence it must possess the speed of light.
E= 6.6×10^-34 × 3×10^8/ 0.36
E= 55×10^-26 J
Hence the energy possessed by 0.36 meters wavelength radio waves is 55×10^-26 J
How many joules are produced when 45 gram of copper is placed into water that releases them temperature from 12c to 71c (c)=0.75j/g*c
Answer:
Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)
Explanation:
Given:
Mass of copper (M) = 45 gram
Change in temperature (ΔT) = 71°C - 12°C = 59°C
Specific heat (c) =0.75 j /g*c
Find:
Heat energy (Q) = ?
Computation:
Heat energy (Q) = Mass(M) × Change in temperature (ΔT) × Specific heat (c)
Heat energy (Q) = 45 gram × 59°C × 0.75 j /g*c
Heat energy (Q) = 1991.25 J
Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)
how does atomic spectrum differ from continuous spectrum
Answer:
A continuous spectrum is a record formed by collecting light of all frequencies traveling through space together. ... A line spectrum is a record formed by collecting light emitted from excited atoms whose electrons are falling back down to lower energy states.
Explanation:
Which of these Electromagnetic waves has the most kinetic energy and can be
dangerous?
O radio waves
O gamma rays
O ultraviolet waves
O visible light
Answer:
Gamma Rays.
Explanation:
Gamma-ray photons have the highest energy in the EMR spectrum and their waves have the shortest wavelength.
The reaction for the combustion of methane is shown below. If 28.70g of methane
reacts with 51.40g of oxygen, how much water will be produced? Record your
answer with 2 decimal places.
CH
+
20,
oxygen
CO2
carbon dioxide
+ 2H,0
water
methane
Answer:
2.888mm needs for the reaction
Fossil fuels, like coal, oil, and natural gas, are huge, carbon-rich deposits that essentially trapped carbon for millions of years (until humans started burning them for energy).
True or False
Answer:
True!
Explanation:
Fossil fuels are carbon based compounds present deep in the earth left millions of years ago.
hope it helps!
A balloon filled with air has a volume of 6.50 L, a pressure of 0.900 atm, and a temperature of 25.0oC. If it is left out overnight, during which the temperature decreases to 15.0oC and the pressure rises to 1.15 atm, what will the volume of the balloon be?
Answer:
4.92 L
Explanation:
Rearrange ideal gas law and solve.
Change C to K.
- Hope that helps! Please let me know if you need further explanation.
Name some uses of Chlorine and bromine compounds
Answer:
kii
Explanation:
What does “moving slow” mean to a geologist?
A landslide can be defined as a mass movement of material (e.g., rocks), which moves down a steep slope. A geologist is an expert that studies SLOW-MOVING landslides on a geological scale.
Landslides can occur suddenly or more slowly over long periods of time.
On a geological scale, landslides occur slowly so they are imperceptible to humans.
A geologist is a professional who investigates landslides on a geological scale, which is coarse on a human time-frame.
In conclusion, a geologist is a professional who investigates SLOW-MOVING landslides on a geological scale.
Learn more in:
https://brainly.com/question/5634603?referrer=searchResults
The only thing that makes one kind of light different from another is it’s ____?
A) frequency
B) color
C) wavelength
D) temperature
Fiona is examining a material. She notices that the material has a dull appearance and feels very brittle.
Fiona is most likely examining a _______
(I'll give brainliest)
"Typical nonmetals have a dull, coloured or colourless appearance; are brittle when solid; are poor conductors of heat and electricity; and have acidic oxides." - Wikipedia
Why is soap mixed with water?
O A. The soap turns the water molecules into a nonpolar solvent.
B. It covalently bonds to the water so it can be washed away.
O C. Its polar end mixes with the water so it can be washed away.
D. The soap becomes chemically active when mixed with water.
Answer:
Explanation:
Soap breaks up the oil into smaller drops, which can mix with the water. It works because soap is made up of molecules with two very different ends. One end of soap molecules love water - they are hydrophilic. The other end of soap molecues hate water - they are hydrophobic.
Answer:
C. Its polar end mixes with the water so it can be washed away.
Explanation:
Just took test
As the temperature of a fixed volume of a gas increases, the pressure will _____. A. vary inversely B. increase C. decrease D. not change
Answer:
increases
Explanation:
As the temperature of a fixed volume of a gas increases, the pressure will increase.
What is Gay Lussac's law?
According to this law at constant volume of gas, pressure is directly proportional to the temperature of the gas and it is represented as:
P ∝ T.
It means that if pressure increases then temperature is also increases or if pressure decreases then temperature will also decreases.
So, pressure of the gas increases.
To know more about Gay Lussac's law, visit the below link:
https://brainly.com/question/24002551
When water changes into water vapor, this is called_______.
A) condensation
B) transpiration
C) precipitation
D) evaporation
Answer:
Evaporation
Explanation:
Evaporation turns liquid water into a gas called water vapor. If heat is taken away from water vapor, it condenses. Condensation turns water vapor into a liquid. If heat is taken away from liquid water, it freezes to become ice.
Answer:
D
Explanation:
Icp need help of available
Answer:
True statements: B and C
Explanation:
A is not true NaCl is product
D is not true the reaction occurs
(7.02 LC) Which statement about this reaction is correct?
Answer: The reaction of one mole of oxygen [tex](O_2)[/tex] releases 445 kJ of energy.
Explanation:
Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be positive.
[tex]CH_4(g)+2O_2(g)\rightarrow CO_2(g)+2H_2O(l)[/tex] [tex]\Delta H=-890kJ[/tex]
on halving the reaction, enthalpy also becomes half
[tex]\frac{1}{2}CH_4(g)+O_2(g)\rightarrow \frac{1}{2}CO_2(g)+H_2O(l)[/tex] [tex]\Delta H=-445kJ[/tex]
Thus The reaction of one mole of oxygen [tex](O_2)[/tex] releases 445 kJ of energy.
What is the mole fraction of Ba(OH)2 in an aqueous solution that contains 22.8% Ba(OH)2 by mass?
Answer:
0.03
Explanation:
22.8 g Ba(OH)2 (1 mol Ba (OH)2/ 171.34 g) = 0.133 mol Ba (OH)2
77.2 g H2O (1 mol H2O/18 g) = 4.29 mol H2O
X= molar fraction= mol Ba(OH)2/ mol total
X= 0.133/ (0.133+4.29) = 0.03
0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.
What is a mole fraction?The ratio of the number of moles of one component of a solution or other mixture to the total number of moles representing all of the components.
Moles of [tex]Ba(OH)_2[/tex]
Moles = [tex]\frac{mass}{molar \;mass}[/tex]
Moles = [tex]\frac{22.8 g Ba(OH)_2}{171.34 g}[/tex]
= 0.133 mol [tex]Ba (OH)_2[/tex]
Moles of [tex]H_2O[/tex]
[tex]Moles = \frac{mass}{molar \;mass}[/tex]
[tex]Moles = \frac{77.2 g H_2O}{18 g}[/tex]
= 4.29 mol [tex]H_2O[/tex]
The mole fraction of [tex]Ba(OH)_2[/tex]
[tex]\frac{mol Ba(OH)_2}{total \;mol}[/tex]
= 0.03
0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.
Learn more about the mole fraction here:
https://brainly.com/question/8076655
#SPJ2
HELPPP ASAPPPP PLEASEEEEEEEEEEEEEEEEEE
Determine the mass of hydrogen in a 2.5 sample of ammonia
show work using dimensional analysis
Answer:
[tex]\large \boxed{\text{0.44 g}}[/tex]
Explanation:
1. Calculate the molar mass of ammonia
1 N = 1 × 14.01 g = 14.01 g
3 H = 3 × 1.008 g = 3.024
TOTAL = 17.03 g
2. Calculate the mass of hydrogen
So, there are 3.024 g of H in17.03 g of NH₃.
The conversion factor is either
[tex]\dfrac{\text{3.024 g H}}{\text{17.03 g NH}_{3}} \text{ or } \dfrac{\text{17.03 g NH}_{3}}{\text{3.024 g H}}[/tex]
We want to find grams of H, so we choose the one with grams of H on top.
[tex]\text{Mass of H} = \text{2.5 g NH}_{3} \times \dfrac{\text{3.024 g H}}{\text{17.03 g NH}_{3}} = \textbf{0.44 g H}\\\\\text{The mass of H is $\large \boxed{\textbf{0.44 g}}$}[/tex]
How much would this compound weight
Answer:98g/mol
Explanation:
B. If the sand you ran across has a specific-heat capacity of 835 J/(kgºc),
how much energy must be added to a 2-kilogram pile of it to increase its
temperature from 40°C to 50°C? Show your work. (3 points)
Answer: 16700 Joules
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=m\times c\times \Delta T[/tex]
Q = Heat absorbed = ?
m = mass of sand = 2 kg
c = heat capacity = [tex]835J/kg^0C[/tex]
Initial temperature = [tex]T_i[/tex] = [tex]40^0C[/tex]
Final temperature= [tex]T_f[/tex] = [tex]50^0C[/tex]
Change in temperature ,[tex]\Delta T=T_f-T_i=(50-40)^0C=10^0C[/tex]
Putting in the values, we get:
[tex]Q=2kg\times 835J/kg^0C\times 10^0C[/tex]
[tex]Q=16700J[/tex]
16700 J of energy must be added to a 2-kilogram pile of it to increase its temperature from 40°C to 50°C
What kind of energy transformations occur when you hit a coconut with a hammer
sound energy, kinetic energy,
i cant think of any more but hope this helps
Answer:
Mechanical to kinetic to sound to heat
Explanation:
Remember that all types of energy transformation end in heat
how many Atoms of chlorine Cl are there in 3.45 mol Cl?
Answer:
2.078x10^24
Explanation:
No. of atoms of chlorine = 3.45 x 6.022x 10 ^23 x 1
= 2.078x10^24
( to find no. of atoms of, heres the formula i was taught No. of atoms = no. of moles x Avogadros constant x no. of atoms in the formula of compound)
At 25ºC, the average velocity of a hydrogen molecule is 1.92 x 103 m/s. What is the average velocity of a nitrogen molecule at the same temperature?
NEED WORK
Answer:
V = 513.36m/s
Explanation:
Temperature (T) = 25°C = (25 + 273.15) = 298.15K
Speed (V) = 1.92*10³m/s
According to kinetic theory of gases, the speed (v) of a molecule is
V= √(3RT / M)
V = speed or velocity
R = ideal gas constant = 0.082J/mol.K
T = temperature of the gas
M = molar mass
Molar mass of hydrogen molecule = 2.0g/mol
Molar mass of Nitrogen molecule = (2×14.0) = 28.0g/mol
Since they're in the same temperature
V1 / V2 = √(M2 / M1)
1.92×10³ / V2 = √(28 / 2)
1.92×10³ / V2 = √(14)
1.92*10³ / V2 = 3.74
1.92*10³ = 3.74V2
V2 = 1920 / 3.74
V2 = 513.36m/s
The velocity of Nitrogen molecule is 513.36m/s
how many moles of solute are present in 50.0 ml of 0.20 m kno3
Answer: Volume = 50.0 mL in liters : 50.0 / 1000 = 0.05 L
n = M x V
n = 0.20 x 0.05
n = 0.01 moles of solute
Explanation:
The number of moles of solute are present in 50.0 mL of 0.20 M of KNO₃ solution is 0.01 moles.
How do we calculate moles?Moles will be calculated by using the molarity formula because molarity is define as the no. of moles of solute present in per liter of the solution as:
M = n/V, where
M = molarity of KNO₃ = 0.2 M
V = volume of solution = 50mL = 0.05L
Moles will be calculated as:
n = (0.2)(0.05) = 0.01 moles
Hence required moles are 0.01 moles.
To know more about molarity, visit the below link:
https://brainly.com/question/26528084
Need help with these three pls!!!!!
Which substance should a student apply to the skin if he or she gets splashed with an acid?
Help me!
what is the biggest disadvantage of using nuclear power to produce electricity?
a. nuclear fission releases more air pollution than burning coal
b. nuclear fission produces less energy than burning coal or oil.
c. nuclear waste must be safely stored for many years
d. nuclear waste must be incinerated
The biggest disadvantage of using nuclear power to produce electricity is the nuclear waste must be safely stored for many years.
What is nuclear power?Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from:
Nuclear fission Nuclear decay and Nuclear fusion reactionsNuclear reactions produces high amount of energy and many waste materials which are non degradable and will stay in the environment for the long time.
Hence, nuclear waste must be safely stored for many years.
To know more about nuclear power, visit the below link:
https://brainly.com/question/11963586
#SPJ2
1. Which gas will move faster through a small opening hydrogen or oxygen? *
A)hydrogen
B) oxygen
Answer:
hydrogen
Explanation:
what happens to the density of a box full of leaves if you crush up all the leaves and place them in another box
A the density increases
B the density stays the same
C the density decreases
D the density first decreases, then increases
Answer:
B the density stays the same
